* Re: Linux 3.1-rc3
@ 2011-08-26 12:59 Pawel Sikora
0 siblings, 0 replies; 2+ messages in thread
From: Pawel Sikora @ 2011-08-26 12:59 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 240 bytes --]
Hi,
i've noticed an usb related problem on the new Asus N73SV N73 laptop
please look at the read error in attached log.
[11.413705] usb 3-1.1: device descriptor read/64, error -32
this read error also occurs on stable-3.0.3.
BR,
Pawel.
[-- Attachment #2: dmesg.log --]
[-- Type: text/x-log, Size: 62110 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.1.0-rc3-00161-g671ee7f-dirty (pluto@vmx) (gcc version 4.6.1 20110714 (release) (PLD-Linux) ) #2 SMP Fri Aug 26 14:18:51 CEST 2011
[ 0.000000] Command line: root=/dev/vg_storage/lv_root ramdisk_size=6144 slub_debug=FZPU
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000aabd1000 (usable)
[ 0.000000] BIOS-e820: 00000000aabd1000 - 00000000aace4000 (reserved)
[ 0.000000] BIOS-e820: 00000000aace4000 - 00000000aace6000 (usable)
[ 0.000000] BIOS-e820: 00000000aace6000 - 00000000aacf9000 (reserved)
[ 0.000000] BIOS-e820: 00000000aacf9000 - 00000000aacfa000 (usable)
[ 0.000000] BIOS-e820: 00000000aacfa000 - 00000000aad8e000 (reserved)
[ 0.000000] BIOS-e820: 00000000aad8e000 - 00000000aad8f000 (usable)
[ 0.000000] BIOS-e820: 00000000aad8f000 - 00000000aadb8000 (reserved)
[ 0.000000] BIOS-e820: 00000000aadb8000 - 00000000aadc8000 (usable)
[ 0.000000] BIOS-e820: 00000000aadc8000 - 00000000aade8000 (reserved)
[ 0.000000] BIOS-e820: 00000000aade8000 - 00000000aaf19000 (usable)
[ 0.000000] BIOS-e820: 00000000aaf19000 - 00000000aafe8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000aafe8000 - 00000000aaffd000 (usable)
[ 0.000000] BIOS-e820: 00000000aaffd000 - 00000000ab000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ab000000 - 00000000afa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff980000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000034fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: ASUSTeK Computer Inc. N73SV/N73SV, BIOS N73SV.303 04/28/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x34fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask C00000000 write-back
[ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 2 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0AC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0AB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 380000000 mask F80000000 uncachable
[ 0.000000] 6 base 360000000 mask FE0000000 uncachable
[ 0.000000] 7 base 350000000 mask FF0000000 uncachable
[ 0.000000] 8 base 34FE00000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000ab000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xaaffd max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000aaffd000
[ 0.000000] 0000000000 - 00aae00000 page 2M
[ 0.000000] 00aae00000 - 00aaffd000 page 4k
[ 0.000000] kernel direct mapping tables up to aaffd000 @ aaff8000-aaffd000
[ 0.000000] init_memory_mapping: 0000000100000000-000000034fe00000
[ 0.000000] 0100000000 - 034fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 34fe00000 @ 34fdf1000-34fe00000
[ 0.000000] RAMDISK: 1fe69000 - 1fff0000
[ 0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 00000000aaffee18 00064 (v01 _ASUS_ NoteBook 06222004 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000aaf9bd98 000F4 (v04 _ASUS_ NoteBook 06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110623/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xAAFE5E40/0x00000000AAFE5D40, using 32 (20110623/tbfadt-489)
[ 0.000000] ACPI: DSDT 00000000aaf7c018 0D922 (v01 _ASUS_ NoteBook 00000000 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000aafe5e40 00040
[ 0.000000] ACPI: APIC 00000000aaffdf18 000CC (v02 _ASUS_ NoteBook 06222004 MSFT 00010013)
[ 0.000000] ACPI: HPET 00000000aafe6d18 00038 (v01 _ASUS_ NoteBook 06222004 AMI. 00000003)
[ 0.000000] ACPI: ECDT 00000000aafe5b18 000C1 (v01 _ASUS_ NoteBook 06222004 AMI 00000000)
[ 0.000000] ACPI: MCFG 00000000aafe6c98 0003C (v01 _ASUS_ NoteBook 06222004 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000aaf7b018 00925 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000aaf7a018 00996 (v01 PmRef CpuPm 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000aaf5ea98 002EF (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000034fe00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000034fe00000
[ 0.000000] NODE_DATA [000000034fdfb000 - 000000034fdfffff]
[ 0.000000] [ffffea0000000000-ffffea000d3fffff] PMD -> [ffff880343400000-ffff88034f3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0034fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[11] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000aabd1
[ 0.000000] 0: 0x000aace4 -> 0x000aace6
[ 0.000000] 0: 0x000aacf9 -> 0x000aacfa
[ 0.000000] 0: 0x000aad8e -> 0x000aad8f
[ 0.000000] 0: 0x000aadb8 -> 0x000aadc8
[ 0.000000] 0: 0x000aade8 -> 0x000aaf19
[ 0.000000] 0: 0x000aafe8 -> 0x000aaffd
[ 0.000000] 0: 0x00100000 -> 0x0034fe00
[ 0.000000] On node 0 totalpages: 3122873
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 678251 pages, LIFO batch:31
[ 0.000000] Normal zone: 37880 pages used for memmap
[ 0.000000] Normal zone: 2386440 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000aabd1000 - 00000000aace4000
[ 0.000000] PM: Registered nosave memory: 00000000aace6000 - 00000000aacf9000
[ 0.000000] PM: Registered nosave memory: 00000000aacfa000 - 00000000aad8e000
[ 0.000000] PM: Registered nosave memory: 00000000aad8f000 - 00000000aadb8000
[ 0.000000] PM: Registered nosave memory: 00000000aadc8000 - 00000000aade8000
[ 0.000000] PM: Registered nosave memory: 00000000aaf19000 - 00000000aafe8000
[ 0.000000] PM: Registered nosave memory: 00000000aaffd000 - 00000000ab000000
[ 0.000000] PM: Registered nosave memory: 00000000ab000000 - 00000000afa00000
[ 0.000000] PM: Registered nosave memory: 00000000afa00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
[ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff980000
[ 0.000000] PM: Registered nosave memory: 00000000ff980000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at afa00000 (gap: afa00000:30600000)
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88034fa00000 s74688 r8192 d23616 u131072
[ 0.000000] pcpu-alloc: s74688 r8192 d23616 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3068604
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/vg_storage/lv_root ramdisk_size=6144 slub_debug=FZPU
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 12214904k/13891584k available (4326k kernel code, 1400092k absent, 276588k reserved, 4424k data, 512k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:808 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 100663296 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 1995.413 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.11 BogoMIPS (lpj=6651376)
[ 0.000122] pid_max: default: 32768 minimum: 301
[ 0.000369] Security Framework initialized
[ 0.000430] AppArmor: AppArmor disabled by boot time parameter
[ 0.002192] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.006476] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008233] Mount-cache hash table entries: 256
[ 0.008986] Initializing cgroup subsys cpuacct
[ 0.009051] Initializing cgroup subsys memory
[ 0.009163] Initializing cgroup subsys devices
[ 0.009227] Initializing cgroup subsys freezer
[ 0.009287] Initializing cgroup subsys net_cls
[ 0.009850] Initializing cgroup subsys blkio
[ 0.009944] Initializing cgroup subsys perf_event
[ 0.010134] CPU: Physical Processor ID: 0
[ 0.010191] CPU: Processor Core ID: 0
[ 0.010251] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.010252] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.010373] mce: CPU supports 9 MCE banks
[ 0.010447] CPU0: Thermal monitoring enabled (TM1)
[ 0.010511] using mwait in idle threads.
[ 0.010651] ACPI: Core revision 20110623
[ 0.308932] Switched APIC routing to physical flat.
[ 0.309383] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.342562] CPU0: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz stepping 07
[ 0.447699] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.447888] ... version: 3
[ 0.447945] ... bit width: 48
[ 0.448002] ... generic registers: 4
[ 0.448059] ... value mask: 0000ffffffffffff
[ 0.448118] ... max period: 000000007fffffff
[ 0.448177] ... fixed-purpose events: 3
[ 0.448234] ... event mask: 000000070000000f
[ 0.449143] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.449549] Booting Node 0, Processors #1
[ 0.449631] smpboot cpu 1: start_ip = 99000
[ 0.561147] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.561521] #2
[ 0.561562] smpboot cpu 2: start_ip = 99000
[ 0.687795] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.688152] #3
[ 0.688193] smpboot cpu 3: start_ip = 99000
[ 0.811081] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.811439] #4
[ 0.811479] smpboot cpu 4: start_ip = 99000
[ 0.924339] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.924735] #5
[ 0.924776] smpboot cpu 5: start_ip = 99000
[ 1.037651] NMI watchdog enabled, takes one hw-pmu counter.
[ 1.038037] #6
[ 1.038078] smpboot cpu 6: start_ip = 99000
[ 1.164308] NMI watchdog enabled, takes one hw-pmu counter.
[ 1.164672] #7
[ 1.164713] smpboot cpu 7: start_ip = 99000
[ 1.277603] NMI watchdog enabled, takes one hw-pmu counter.
[ 1.277723] Brought up 8 CPUs
[ 1.277779] Total of 8 processors activated (31940.79 BogoMIPS).
[ 1.283421] devtmpfs: initialized
[ 1.302804] PM: Registering ACPI NVS region at aaf19000 (847872 bytes)
[ 1.304574] print_constraints: dummy:
[ 1.305068] NET: Registered protocol family 16
[ 1.307398] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 1.307479] ACPI: bus type pci registered
[ 1.309261] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 1.309342] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 1.329556] PCI: Using configuration type 1 for base access
[ 1.348619] bio: create slab <bio-0> at 0
[ 1.349322] ACPI: Added _OSI(Module Device)
[ 1.349387] ACPI: Added _OSI(Processor Device)
[ 1.349451] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.349516] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.352332] ACPI: EC: EC description table is found, configuring boot EC
[ 1.352411] ACPI: EC: Look up EC in DSDT
[ 1.358798] ACPI: Executed 1 blocks of module-level executable AML code
[ 1.494421] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 1.566883] ACPI: SSDT 00000000aadcc718 00694 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
[ 1.570124] ACPI: Dynamic OEM Table Load:
[ 1.570255] ACPI: SSDT (null) 00694 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
[ 1.586344] ACPI: SSDT 00000000aadcda98 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
[ 1.591864] ACPI: Dynamic OEM Table Load:
[ 1.591995] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
[ 1.604212] ACPI: SSDT 00000000aadcbd98 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
[ 1.606663] ACPI: Dynamic OEM Table Load:
[ 1.606792] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
[ 1.659756] ACPI: Interpreter enabled
[ 1.659815] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.660502] ACPI: Using IOAPIC for interrupt routing
[ 1.952803] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 1.955198] ACPI: No dock devices found.
[ 1.955256] HEST: Table not found.
[ 1.955312] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.964569] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 1.983154] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.983218] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.983280] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.983356] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 1.983431] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 1.983507] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 1.983583] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 1.983658] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 1.983733] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 1.983809] pci_root PNP0A08:00: host bridge window [mem 0xafa00000-0xfeafffff]
[ 1.983888] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 1.984035] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[ 1.984089] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 1.984120] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.984124] pci 0000:00:01.0: PME# disabled
[ 1.984154] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
[ 1.984165] pci 0000:00:02.0: reg 10: [mem 0xdc400000-0xdc7fffff 64bit]
[ 1.984172] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 1.984178] pci 0000:00:02.0: reg 20: [io 0xe000-0xe03f]
[ 1.984241] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 1.984266] pci 0000:00:16.0: reg 10: [mem 0xdf00a000-0xdf00a00f 64bit]
[ 1.984332] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.984336] pci 0000:00:16.0: PME# disabled
[ 1.984380] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 1.984402] pci 0000:00:1a.0: reg 10: [mem 0xdf008000-0xdf0083ff]
[ 1.984479] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.984484] pci 0000:00:1a.0: PME# disabled
[ 1.984520] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 1.984537] pci 0000:00:1b.0: reg 10: [mem 0xdf000000-0xdf003fff 64bit]
[ 1.984599] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.984603] pci 0000:00:1b.0: PME# disabled
[ 1.984636] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 1.984706] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.984711] pci 0000:00:1c.0: PME# disabled
[ 1.984746] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[ 1.984817] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.984821] pci 0000:00:1c.1: PME# disabled
[ 1.984863] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[ 1.984934] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.984939] pci 0000:00:1c.3: PME# disabled
[ 1.984976] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[ 1.985046] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.985050] pci 0000:00:1c.5: PME# disabled
[ 1.985092] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 1.985115] pci 0000:00:1d.0: reg 10: [mem 0xdf007000-0xdf0073ff]
[ 1.985191] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.985196] pci 0000:00:1d.0: PME# disabled
[ 1.985232] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
[ 1.985362] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[ 1.985382] pci 0000:00:1f.2: reg 10: [io 0xe0b0-0xe0b7]
[ 1.985391] pci 0000:00:1f.2: reg 14: [io 0xe0a0-0xe0a3]
[ 1.985400] pci 0000:00:1f.2: reg 18: [io 0xe090-0xe097]
[ 1.985409] pci 0000:00:1f.2: reg 1c: [io 0xe080-0xe083]
[ 1.985417] pci 0000:00:1f.2: reg 20: [io 0xe060-0xe07f]
[ 1.985426] pci 0000:00:1f.2: reg 24: [mem 0xdf006000-0xdf0067ff]
[ 1.985461] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.985464] pci 0000:00:1f.2: PME# disabled
[ 1.985493] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 1.985510] pci 0000:00:1f.3: reg 10: [mem 0xdf005000-0xdf0050ff 64bit]
[ 1.985532] pci 0000:00:1f.3: reg 20: [io 0xe040-0xe05f]
[ 1.985611] pci 0000:01:00.0: [10de:0df4] type 0 class 0x000300
[ 1.985620] pci 0000:01:00.0: reg 10: [mem 0xdb000000-0xdbffffff]
[ 1.985629] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.985639] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 1.985646] pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
[ 1.985652] pci 0000:01:00.0: reg 30: [mem 0xdc000000-0xdc07ffff pref]
[ 1.985697] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.985758] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 1.985761] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
[ 1.985765] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 1.985822] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.985885] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.985890] pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff]
[ 1.985897] pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
[ 1.985993] pci 0000:03:00.0: [168c:002b] type 0 class 0x000280
[ 1.986022] pci 0000:03:00.0: reg 10: [mem 0xddc00000-0xddc0ffff 64bit]
[ 1.986135] pci 0000:03:00.0: supports D1
[ 1.986136] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[ 1.986142] pci 0000:03:00.0: PME# disabled
[ 1.986186] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.986248] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 1.986253] pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff]
[ 1.986260] pci 0000:00:1c.1: bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
[ 1.986352] pci 0000:04:00.0: [1b73:1000] type 0 class 0x000c03
[ 1.986374] pci 0000:04:00.0: reg 10: [mem 0xdd200000-0xdd20ffff]
[ 1.986502] pci 0000:04:00.0: PME# supported from D0 D3hot
[ 1.986508] pci 0000:04:00.0: PME# disabled
[ 1.986543] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 1.986604] pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
[ 1.986608] pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff]
[ 1.986615] pci 0000:00:1c.3: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
[ 1.986707] pci 0000:05:00.0: [1969:1083] type 0 class 0x000200
[ 1.986736] pci 0000:05:00.0: reg 10: [mem 0xdc800000-0xdc83ffff 64bit]
[ 1.986752] pci 0000:05:00.0: reg 18: [io 0x9000-0x907f]
[ 1.986858] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.986864] pci 0000:05:00.0: PME# disabled
[ 1.986915] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 1.986977] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
[ 1.986981] pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff]
[ 1.986988] pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
[ 1.987013] pci 0000:00:01.0: Dev MPS 128 MPSS 128 MRRS 128
[ 1.987075] pci 0000:00:01.0: Dev MPS 128 MPSS 128 MRRS 128
[ 1.987136] pci 0000:01:00.0: Dev MPS 128 MPSS 128 MRRS 512
[ 1.987204] pci 0000:01:00.0: Dev MPS 128 MPSS 128 MRRS 128
[ 1.987268] pci 0000:00:1c.0: Dev MPS 128 MPSS 128 MRRS 128
[ 1.987333] pci 0000:00:1c.0: Dev MPS 128 MPSS 128 MRRS 128
[ 1.987397] pci 0000:00:1c.1: Dev MPS 128 MPSS 128 MRRS 128
[ 1.987462] pci 0000:00:1c.1: Dev MPS 128 MPSS 128 MRRS 128
[ 1.987524] pci 0000:03:00.0: Dev MPS 128 MPSS 128 MRRS 512
[ 1.987598] pci 0000:03:00.0: Dev MPS 128 MPSS 128 MRRS 128
[ 1.987660] pci 0000:00:1c.3: Dev MPS 128 MPSS 128 MRRS 128
[ 1.987724] pci 0000:00:1c.3: Dev MPS 128 MPSS 128 MRRS 128
[ 1.987788] pci 0000:04:00.0: Dev MPS 128 MPSS 128 MRRS 512
[ 1.987861] pci 0000:04:00.0: Dev MPS 128 MPSS 128 MRRS 128
[ 1.987921] pci 0000:00:1c.5: Dev MPS 128 MPSS 128 MRRS 128
[ 1.987986] pci 0000:00:1c.5: Dev MPS 128 MPSS 128 MRRS 128
[ 1.988050] pci 0000:05:00.0: Dev MPS 128 MPSS 4096 MRRS 512
[ 1.988124] pci 0000:05:00.0: Dev MPS 128 MPSS 128 MRRS 128
[ 1.988199] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.997609] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.999191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 2.000828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 2.002456] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 2.004375] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGR._PRT]
[ 2.006159] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 2.006230] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 2.006306] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 2.900001] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 2.901763] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[ 2.903663] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 10 11 12 14 15)
[ 2.905402] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 2.907150] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.908969] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.910789] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[ 2.912509] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 10 11 12 14 15)
[ 2.914577] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.914731] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 2.914831] vgaarb: loaded
[ 2.914885] vgaarb: bridge control possible 0000:01:00.0
[ 2.914943] vgaarb: bridge control possible 0000:00:02.0
[ 2.918063] PCI: Using ACPI for IRQ routing
[ 2.919710] PCI: pci_cache_line_size set to 64 bytes
[ 2.920029] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 2.920039] reserve RAM buffer: 00000000aabd1000 - 00000000abffffff
[ 2.920161] reserve RAM buffer: 00000000aace6000 - 00000000abffffff
[ 2.920265] reserve RAM buffer: 00000000aacfa000 - 00000000abffffff
[ 2.920348] reserve RAM buffer: 00000000aad8f000 - 00000000abffffff
[ 2.920408] reserve RAM buffer: 00000000aadc8000 - 00000000abffffff
[ 2.920448] reserve RAM buffer: 00000000aaf19000 - 00000000abffffff
[ 2.920474] reserve RAM buffer: 00000000aaffd000 - 00000000abffffff
[ 2.920487] reserve RAM buffer: 000000034fe00000 - 000000034fffffff
[ 2.921657] NetLabel: Initializing
[ 2.921714] NetLabel: domain hash size = 128
[ 2.921771] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.921920] NetLabel: unlabeled traffic allowed by default
[ 2.922211] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 2.922604] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 2.925795] Switching to clocksource hpet
[ 2.926907] Switched to NOHz mode on CPU #0
[ 2.926997] Switched to NOHz mode on CPU #4
[ 2.927015] Switched to NOHz mode on CPU #5
[ 2.927023] Switched to NOHz mode on CPU #1
[ 2.927038] Switched to NOHz mode on CPU #3
[ 2.927048] Switched to NOHz mode on CPU #7
[ 2.927052] Switched to NOHz mode on CPU #2
[ 2.927054] Switched to NOHz mode on CPU #6
[ 2.940095] pnp: PnP ACPI init
[ 2.940233] ACPI: bus type pnp registered
[ 2.948809] pnp 00:00: [bus 00-3e]
[ 2.948817] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 2.948824] pnp 00:00: [io 0x0cf8-0x0cff]
[ 2.948830] pnp 00:00: [io 0x0d00-0xffff window]
[ 2.948836] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 2.948842] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 2.948849] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 2.948855] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 2.948861] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 2.948867] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 2.948873] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 2.948879] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 2.948885] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 2.948890] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 2.948896] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 2.948902] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 2.948917] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 2.948924] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 2.948931] pnp 00:00: [mem 0xafa00000-0xfeafffff window]
[ 2.948938] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 2.949280] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 2.949446] pnp 00:01: [io 0x0000-0x001f]
[ 2.949453] pnp 00:01: [io 0x0081-0x0091]
[ 2.949459] pnp 00:01: [io 0x0093-0x009f]
[ 2.949466] pnp 00:01: [io 0x00c0-0x00df]
[ 2.949473] pnp 00:01: [dma 4]
[ 2.949770] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 2.949887] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 2.950214] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 2.951662] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 2.951968] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 2.952100] pnp 00:04: [io 0x00f0]
[ 2.952113] pnp 00:04: [irq 13]
[ 2.952431] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 2.952544] pnp 00:05: [io 0x002e-0x002f]
[ 2.952550] pnp 00:05: [io 0x004e-0x004f]
[ 2.952557] pnp 00:05: [io 0x0061]
[ 2.952563] pnp 00:05: [io 0x0063]
[ 2.952568] pnp 00:05: [io 0x0065]
[ 2.952574] pnp 00:05: [io 0x0067]
[ 2.952580] pnp 00:05: [io 0x0070]
[ 2.952586] pnp 00:05: [io 0x0080]
[ 2.952592] pnp 00:05: [io 0x0092]
[ 2.952597] pnp 00:05: [io 0x00b2-0x00b3]
[ 2.952603] pnp 00:05: [io 0x0680-0x069f]
[ 2.952609] pnp 00:05: [io 0x1000-0x100f]
[ 2.952615] pnp 00:05: [io 0xffff]
[ 2.952621] pnp 00:05: [io 0xffff]
[ 2.952626] pnp 00:05: [io 0x0400-0x0453]
[ 2.952632] pnp 00:05: [io 0x0458-0x047f]
[ 2.952638] pnp 00:05: [io 0x0500-0x057f]
[ 2.952643] pnp 00:05: [io 0x164e-0x164f]
[ 2.953183] system 00:05: [io 0x0680-0x069f] has been reserved
[ 2.953257] system 00:05: [io 0x1000-0x100f] has been reserved
[ 2.953329] system 00:05: [io 0xffff] has been reserved
[ 2.953401] system 00:05: [io 0xffff] has been reserved
[ 2.953472] system 00:05: [io 0x0400-0x0453] has been reserved
[ 2.953545] system 00:05: [io 0x0458-0x047f] has been reserved
[ 2.953617] system 00:05: [io 0x0500-0x057f] has been reserved
[ 2.953689] system 00:05: [io 0x164e-0x164f] has been reserved
[ 2.953751] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.953858] pnp 00:06: [io 0x0070-0x0077]
[ 2.953868] pnp 00:06: [irq 8]
[ 2.954166] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.954540] pnp 00:07: [io 0x0454-0x0457]
[ 2.955065] system 00:07: [io 0x0454-0x0457] has been reserved
[ 2.955129] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 2.956163] pnp 00:08: [irq 12]
[ 2.956490] pnp 00:08: Plug and Play ACPI device, IDs ETD0001 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 2.956894] pnp 00:09: [io 0x0060]
[ 2.956900] pnp 00:09: [io 0x0064]
[ 2.956909] pnp 00:09: [irq 1]
[ 2.957237] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 3.013425] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 3.013432] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 3.013439] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 3.013446] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 3.013452] pnp 00:0a: [mem 0xe0000000-0xe3ffffff]
[ 3.013459] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 3.013465] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 3.013472] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 3.013478] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 3.013485] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 3.013491] pnp 00:0a: [mem 0xafa00000-0xafa00fff]
[ 3.014053] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 3.014138] system 00:0a: [mem 0xfed10000-0xfed17fff] could not be reserved
[ 3.014212] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 3.014284] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 3.014358] system 00:0a: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 3.014431] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 3.014505] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 3.015078] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 3.015163] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 3.015249] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 3.015324] system 00:0a: [mem 0xafa00000-0xafa00fff] has been reserved
[ 3.015387] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.016207] pnp 00:0b: [mem 0xafa00000-0xafa00fff]
[ 3.016744] system 00:0b: [mem 0xafa00000-0xafa00fff] has been reserved
[ 3.016808] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 3.019712] pnp 00:0c: [mem 0x20000000-0x201fffff]
[ 3.019719] pnp 00:0c: [mem 0x40000000-0x401fffff]
[ 3.020275] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
[ 3.020349] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
[ 3.020412] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 3.020481] pnp: PnP ACPI: found 13 devices
[ 3.020538] ACPI: ACPI bus type pnp unregistered
[ 3.048518] PCI: max bus depth: 1 pci_try_num: 2
[ 3.048557] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 3.048618] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 3.048681] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
[ 3.048744] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 3.048823] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 3.048883] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 3.048947] pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff]
[ 3.049011] pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
[ 3.049092] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 3.049152] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 3.049216] pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff]
[ 3.049280] pci 0000:00:1c.1: bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
[ 3.049372] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 3.049432] pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
[ 3.049497] pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff]
[ 3.049561] pci 0000:00:1c.3: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
[ 3.049641] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 3.049701] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
[ 3.049766] pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff]
[ 3.049830] pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
[ 3.049940] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.050003] pci 0000:00:01.0: setting latency timer to 64
[ 3.050010] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.050074] pci 0000:00:1c.0: setting latency timer to 64
[ 3.050100] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.050165] pci 0000:00:1c.1: setting latency timer to 64
[ 3.050190] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.050255] pci 0000:00:1c.3: setting latency timer to 64
[ 3.050262] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.050327] pci 0000:00:1c.5: setting latency timer to 64
[ 3.050332] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 3.050334] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 3.050336] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 3.050338] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 3.050340] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 3.050343] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 3.050345] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 3.050347] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 3.050350] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 3.050352] pci_bus 0000:00: resource 13 [mem 0xafa00000-0xfeafffff]
[ 3.050354] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
[ 3.050356] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 3.050358] pci_bus 0000:01: resource 1 [mem 0xdb000000-0xdc0fffff]
[ 3.050361] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 3.050363] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 3.050365] pci_bus 0000:02: resource 1 [mem 0xde600000-0xdeffffff]
[ 3.050368] pci_bus 0000:02: resource 2 [mem 0xd4200000-0xd4bfffff 64bit pref]
[ 3.050370] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 3.050372] pci_bus 0000:03: resource 1 [mem 0xddc00000-0xde5fffff]
[ 3.050374] pci_bus 0000:03: resource 2 [mem 0xd3700000-0xd40fffff 64bit pref]
[ 3.050377] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
[ 3.050379] pci_bus 0000:04: resource 1 [mem 0xdd200000-0xddbfffff]
[ 3.050381] pci_bus 0000:04: resource 2 [mem 0xd2c00000-0xd35fffff 64bit pref]
[ 3.050383] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
[ 3.050385] pci_bus 0000:05: resource 1 [mem 0xdc800000-0xdd1fffff]
[ 3.050387] pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
[ 3.050520] NET: Registered protocol family 2
[ 3.051077] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 3.052643] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 3.054219] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 3.054423] TCP: Hash tables configured (established 524288 bind 65536)
[ 3.054486] TCP reno registered
[ 3.054578] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 3.054725] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 3.055299] NET: Registered protocol family 1
[ 3.055410] pci 0000:00:02.0: Boot video device
[ 3.302858] PCI: CLS 64 bytes, default 64
[ 3.303104] Trying to unpack rootfs image as initramfs...
[ 3.338761] Freeing initrd memory: 1564k freed
[ 3.338976] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 3.339038] Placing 64MB software IO TLB between ffff8800a6bd1000 - ffff8800aabd1000
[ 3.339114] software IO TLB at phys 0xa6bd1000 - 0xaabd1000
[ 3.350855] audit: initializing netlink socket (disabled)
[ 3.350950] type=2000 audit(1314368942.973:1): initialized
[ 3.393914] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.460951] VFS: Disk quotas dquot_6.5.2
[ 3.461349] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.462006] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 3.462389] msgmni has been set to 23860
[ 3.463835] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.463970] io scheduler noop registered
[ 3.464028] io scheduler deadline registered
[ 3.464699] io scheduler cfq registered (default)
[ 3.466089] pcieport 0000:00:01.0: setting latency timer to 64
[ 3.466134] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 3.467929] intel_idle: MWAIT substates: 0x21120
[ 3.467931] intel_idle: v0.4 model 0x2A
[ 3.467932] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 3.469535] ERST: Table is not found!
[ 3.469592] GHES: HEST is not enabled!
[ 3.642103] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.851638] Linux agpgart interface v0.103
[ 3.865112] brd: module loaded
[ 3.865655] Fixed MDIO Bus: probed
[ 3.866169] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 3.867970] i8042: Detected active multiplexing controller, rev 1.1
[ 3.868908] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.868981] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.869235] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.869325] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.869596] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.870773] mousedev: PS/2 mouse device common for all mice
[ 3.871091] rtc_cmos 00:06: RTC can wake from S4
[ 3.871779] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 3.871892] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 3.880040] cpuidle: using governor ladder
[ 3.895256] cpuidle: using governor menu
[ 3.895789] TCP cubic registered
[ 3.898313] NET: Registered protocol family 10
[ 3.900684] Mobile IPv6
[ 3.900742] NET: Registered protocol family 17
[ 3.900999] Registering the dns_resolver key type
[ 3.902086] registered taskstats version 1
[ 3.921627] rtc_cmos 00:06: setting system clock to 2011-08-26 14:29:04 UTC (1314368944)
[ 3.922493] Initializing network drop monitor service
[ 3.923655] Freeing unused kernel memory: 512k freed
[ 3.923775] Write protecting the kernel read-only data: 8192k
[ 3.929498] Freeing unused kernel memory: 1800k freed
[ 3.931066] Freeing unused kernel memory: 396k freed
[ 3.931240] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.944787] SCSI subsystem initialized
[ 3.947997] libata version 3.00 loaded.
[ 3.950931] ahci 0000:00:1f.2: version 3.0
[ 3.950950] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.951147] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 3.962489] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 3.962590] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 3.962671] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.985814] scsi0 : ahci
[ 3.987923] scsi1 : ahci
[ 3.988853] scsi2 : ahci
[ 3.989879] scsi3 : ahci
[ 3.990833] scsi4 : ahci
[ 3.991727] scsi5 : ahci
[ 4.006370] ata1: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006100 irq 41
[ 4.006447] ata2: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006180 irq 41
[ 4.006524] ata3: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006200 irq 41
[ 4.006598] ata4: DUMMY
[ 4.006652] ata5: DUMMY
[ 4.006706] ata6: DUMMY
[ 4.325690] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.325800] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.333355] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.342258] Refined TSC clocksource calibration: 1995.467 MHz.
[ 4.342323] Switching to clocksource tsc
[ 4.345787] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[ 4.345791] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 4.345876] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 4.345971] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[ 4.345978] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 4.346057] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 4.346148] ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[ 4.346152] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 4.346229] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 4.348171] ata1.00: ATA-8: WDC WD5000BEVT-80A0RT0, 01.01A01, max UDMA/133
[ 4.348274] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.348366] ata3.00: ATAPI: HL-DT-STDVDRAM GT34N, AS00, max UDMA/100
[ 4.348831] ata2.00: ATA-8: WDC WD5000BEVT-80A0RT0, 01.01A01, max UDMA/133
[ 4.348943] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.373042] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[ 4.373048] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 4.373131] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 4.373226] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[ 4.373231] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 4.373310] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 4.374046] ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
[ 4.374054] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 4.374178] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 4.375243] ata1.00: configured for UDMA/133
[ 4.375438] ata2.00: configured for UDMA/133
[ 4.375979] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-8 01.0 PQ: 0 ANSI: 5
[ 4.376323] ata3.00: configured for UDMA/100
[ 4.378512] scsi 1:0:0:0: Direct-Access ATA WDC WD5000BEVT-8 01.0 PQ: 0 ANSI: 5
[ 4.382659] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT34N AS00 PQ: 0 ANSI: 5
[ 4.388067] md: raid10 personality registered for level 10
[ 4.391644] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.392149] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 4.392375] sd 0:0:0:0: [sda] Write Protect is off
[ 4.392439] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.392694] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.392820] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.392882] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.393089] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.434903] sda: sda1 sda2
[ 4.437434] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.696229] sdb: sdb1 sdb2
[ 4.698793] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.704805] device-mapper: uevent: version 1.0.3
[ 4.705953] device-mapper: ioctl: 4.21.0-ioctl (2011-07-06) initialised: dm-devel@redhat.com
[ 4.793191] md: md1 stopped.
[ 4.795370] md: bind<sdb2>
[ 4.796177] bio: create slab <bio-1> at 1
[ 4.797831] md/raid10:md1: active with 1 out of 2 devices
[ 4.797979] md1: detected capacity change from 0 to 500007174144
[ 4.827626] md1: unknown partition table
[ 5.091161] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 9.877211] wmi: Mapper loaded
[ 9.899491] cfg80211: Calling CRDA to update world regulatory domain
[ 9.912802] iTCO_vendor_support: vendor-support=0
[ 9.931029] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 9.931429] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 9.931729] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.178482] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 10.178695] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 10.180521] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 10.180923] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 10.279662] thermal LNXTHERM:00: registered as thermal_zone0
[ 10.279665] ACPI: Thermal Zone [TZ00] (60 C)
[ 10.291689] ACPI: acpi_idle yielding to intel_idle
[ 10.300323] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 10.301087] ACPI: AC Adapter [AC0] (on-line)
[ 10.301945] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 10.330902] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 10.330996] ACPI: Battery Slot [BAT0] (battery present)
[ 10.333421] ACPI: Lid Switch [LID]
[ 10.333760] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 10.333775] ACPI: Sleep Button [SLPB]
[ 10.334105] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 10.334123] ACPI: Power Button [PWRF]
[ 10.356710] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 10.363960] usbcore: registered new interface driver usbfs
[ 10.364239] usbcore: registered new interface driver hub
[ 10.364444] usbcore: registered new device driver usb
[ 10.397424] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 10.397505] xhci_hcd 0000:04:00.0: setting latency timer to 64
[ 10.397511] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 10.397643] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
[ 10.407823] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 10.469826] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 10.469836] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 10.470843] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 10.535779] xhci_hcd 0000:04:00.0: irq 19, io mem 0xdd200000
[ 10.536178] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.536180] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.536183] usb usb1: Product: xHCI Host Controller
[ 10.536185] usb usb1: Manufacturer: Linux 3.1.0-rc3-00161-g671ee7f-dirty xhci_hcd
[ 10.536187] usb usb1: SerialNumber: 0000:04:00.0
[ 10.536866] xHCI xhci_add_endpoint called for root hub
[ 10.536869] xHCI xhci_check_bandwidth called for root hub
[ 10.537269] hub 1-0:1.0: USB hub found
[ 10.537344] hub 1-0:1.0: 1 port detected
[ 10.538429] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 10.538470] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[ 10.538808] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 10.538810] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.538812] usb usb2: Product: xHCI Host Controller
[ 10.538814] usb usb2: Manufacturer: Linux 3.1.0-rc3-00161-g671ee7f-dirty xhci_hcd
[ 10.538816] usb usb2: SerialNumber: 0000:04:00.0
[ 10.539407] xHCI xhci_add_endpoint called for root hub
[ 10.539409] xHCI xhci_check_bandwidth called for root hub
[ 10.539713] hub 2-0:1.0: USB hub found
[ 10.539788] hub 2-0:1.0: 1 port detected
[ 10.597884] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.597947] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.598002] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 10.598007] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 10.598051] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 10.598141] ehci_hcd 0000:00:1a.0: debug port 2
[ 10.602035] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 10.602166] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdf008000
[ 10.609754] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.610131] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 10.610496] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 10.613772] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 10.614107] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.614110] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.614112] usb usb3: Product: EHCI Host Controller
[ 10.614114] usb usb3: Manufacturer: Linux 3.1.0-rc3-00161-g671ee7f-dirty ehci_hcd
[ 10.614116] usb usb3: SerialNumber: 0000:00:1a.0
[ 10.614996] hub 3-0:1.0: USB hub found
[ 10.615068] hub 3-0:1.0: 2 ports detected
[ 10.616163] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 10.616230] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 10.616233] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 10.616278] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 10.616368] ehci_hcd 0000:00:1d.0: debug port 2
[ 10.620246] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 10.620391] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdf007000
[ 10.633604] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 10.634012] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.634015] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.634017] usb usb4: Product: EHCI Host Controller
[ 10.634019] usb usb4: Manufacturer: Linux 3.1.0-rc3-00161-g671ee7f-dirty ehci_hcd
[ 10.634021] usb usb4: SerialNumber: 0000:00:1d.0
[ 10.634909] hub 4-0:1.0: USB hub found
[ 10.634981] hub 4-0:1.0: 2 ports detected
[ 10.672481] atl1c 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.672510] atl1c 0000:05:00.0: setting latency timer to 64
[ 10.682508] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 10.683087] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.683093] mei 0000:00:16.0: setting latency timer to 64
[ 10.716532] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 10.725016] elantech: assuming hardware version 2, firmware version 4.2.1
[ 10.753698] elantech: Synaptics capabilities query result 0x78, 0x14, 0x0b.
[ 10.786429] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 10.786564] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 10.786739] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 10.787921] atl1c 0000:05:00.0: version 1.0.1.0-NAPI
[ 10.817045] asus_wmi: ASUS WMI generic driver loaded
[ 10.833795] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input5
[ 10.835684] asus_wmi: Initialization: 0x1
[ 10.843333] asus_wmi: SFUN value: 0x1a0af7
[ 10.877072] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input6
[ 10.920208] usb 3-1: new high speed USB device number 2 using ehci_hcd
[ 11.012419] asus_wmi: Backlight controlled by ACPI video driver
[ 11.044250] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 11.044256] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 11.045538] hub 3-1:1.0: USB hub found
[ 11.045734] hub 3-1:1.0: 6 ports detected
[ 11.153524] usb 4-1: new high speed USB device number 2 using ehci_hcd
[ 11.246202] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 11.246217] ath9k 0000:03:00.0: setting latency timer to 64
[ 11.277171] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 11.277175] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 11.278463] hub 4-1:1.0: USB hub found
[ 11.278651] hub 4-1:1.0: 6 ports detected
[ 11.296854] ath: EEPROM regdomain: 0x60
[ 11.296857] ath: EEPROM indicates we should expect a direct regpair map
[ 11.296861] ath: Country alpha2 being used: 00
[ 11.296863] ath: Regpair used: 0x60
[ 11.346921] usb 3-1.1: new full speed USB device number 3 using ehci_hcd
[ 11.357860] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 11.359445] Registered led device: ath9k-phy0
[ 11.359455] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90006620000, irq=17
[ 11.413705] usb 3-1.1: device descriptor read/64, error -32
[ 11.423336] hda_codec: ALC269VB: BIOS auto-probing.
[ 11.495168] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 11.503921] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 11.504731] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 11.505555] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.601440] usb 3-1.1: New USB device found, idVendor=0cf3, idProduct=3005
[ 11.601446] usb 3-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 11.670171] usb 3-1.2: new high speed USB device number 4 using ehci_hcd
[ 11.760663] Bluetooth: Core ver 2.16
[ 11.760748] NET: Registered protocol family 31
[ 11.760751] Bluetooth: HCI device and connection manager initialized
[ 11.760754] Bluetooth: HCI socket layer initialized
[ 11.760757] Bluetooth: L2CAP socket layer initialized
[ 11.760788] Bluetooth: SCO socket layer initialized
[ 11.792316] usb 3-1.2: New USB device found, idVendor=13d3, idProduct=5122
[ 11.792326] usb 3-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 11.792339] usb 3-1.2: Product: USB2.0 UVC 2M WebCam
[ 11.792341] usb 3-1.2: Manufacturer: USB2.0 UVC 2M WebCam
[ 11.792343] usb 3-1.2: SerialNumber: USB2.0 UVC 2M WebCam
[ 11.796281] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 12.026655] Linux media interface: v0.10
[ 12.133247] Intel AES-NI instructions are not detected.
[ 12.211459] Linux video capture interface: v2.00
[ 12.274006] padlock_aes: VIA PadLock not detected.
[ 12.291561] uvcvideo: Found UVC 1.00 device USB2.0 UVC 2M WebCam (13d3:5122)
[ 12.303662] input: USB2.0 UVC 2M WebCam as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input10
[ 12.304289] usbcore: registered new interface driver uvcvideo
[ 12.304293] USB Video Class driver (1.1.1)
[ 12.354255] usbcore: registered new interface driver btusb
[ 13.988702] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 15.130753] md: md0 stopped.
[ 15.137769] md: bind<sdb1>
[ 15.192893] md: raid1 personality registered for level 1
[ 15.196594] md/raid1:md0: active with 1 out of 2 mirrors
[ 15.196826] md0: detected capacity change from 0 to 98566144
[ 15.202833] md0: unknown partition table
[ 16.278527] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 18.316987] atl1c 0000:05:00.0: irq 43 for MSI/MSI-X
[ 18.317270] atl1c 0000:05:00.0: atl1c: eth0 NIC Link is Up<1000 Mbps Full Duplex>
[ 28.837871] eth0: no IPv6 routers present
[ 30.137705] uvesafb: Intel Corporation, Intel(R)Sandybridge Mobile Graphics Controller, Hardware Version 0.0, OEM: Intel(R)Sandybridge Mobile Graphics Chipset Accelerated VGA BIOS, VBE v3.0
[ 30.146989] uvesafb: VBIOS/hardware supports DDC2 transfers
[ 30.159418] uvesafb: monitor limits: vf = 60 Hz, hf = 57 kHz, clk = 107 MHz
[ 30.159675] uvesafb: scrolling: redraw
[ 30.159702] mtrr: type mismatch for b0000000,800000 old: write-back new: write-combining
[ 30.159714] mtrr: type mismatch for b0000000,400000 old: write-back new: write-combining
[ 30.159726] mtrr: type mismatch for b0000000,200000 old: write-back new: write-combining
[ 30.159738] mtrr: type mismatch for b0000000,100000 old: write-back new: write-combining
[ 30.159750] mtrr: type mismatch for b0000000,80000 old: write-back new: write-combining
[ 30.159761] mtrr: type mismatch for b0000000,40000 old: write-back new: write-combining
[ 30.159773] mtrr: type mismatch for b0000000,20000 old: write-back new: write-combining
[ 30.159785] mtrr: type mismatch for b0000000,10000 old: write-back new: write-combining
[ 30.159796] mtrr: type mismatch for b0000000,8000 old: write-back new: write-combining
[ 30.159808] mtrr: type mismatch for b0000000,4000 old: write-back new: write-combining
[ 30.159820] mtrr: type mismatch for b0000000,2000 old: write-back new: write-combining
[ 30.159832] mtrr: type mismatch for b0000000,1000 old: write-back new: write-combining
[ 30.250147] Console: switching to colour frame buffer device 80x30
[ 30.250661] uvesafb: framebuffer at 0xb0000000, mapped to 0xffffc90006b00000, using 6144k, total 65472k
[ 30.250664] fb0: VESA VGA frame buffer device
^ permalink raw reply [flat|nested] 2+ messages in thread
* Linux 3.1-rc3
@ 2011-08-22 20:22 Linus Torvalds
0 siblings, 0 replies; 2+ messages in thread
From: Linus Torvalds @ 2011-08-22 20:22 UTC (permalink / raw)
To: Linux Kernel Mailing List
It's a day late - I was just too hungry tired after the DM class to
release it yesterday. But there it is, all fresh and new.
And a few thank-yous are in order: things are looking good. The
diffstat looks reasonable (the one big addition is in Documentation),
and while I could have wished for even less churn, I'm pretty happy.
The rc2 to rc3 shortlog is appended, and I think it mostly looks
pretty reasonable and short. Which is not to say that I'm not hoping
that things will calm down even further in the later rc's, but at
least so far I don't think I've had much reason to complain.
Another thank-you goes to Intel: this release has been full of travel
(happily now all completed), first due to a week of vacation during
the merge window, and then for my DM class weekends and LinuxCon. And
the new laptop made it much less painful to do even "allmodconfig"
builds while on the road.
So go out and test.
Linus
---
Alan Cox (1):
gma500: kill MIPI interface types
Alex Deucher (4):
drm/radeon/kms: don't enable connectors that are off in the
hotplug handler
drm/radeon/kms: fix regression is handling >2 heads on cedar/caicos
drm/radeon/kms: make some watermark messages debug only
drm/radeon/kms: don't try to be smart in the hpd handler
Andrew Morton (1):
drivers/cdrom/cdrom.c: relax check on dvd manufacturer value
Arnaldo Carvalho de Melo (1):
perf top browser: Remove spurious helpline update
Arnaud Patard (1):
ata: Add iMX pata support
Axel Lin (1):
block: swim3: fix unterminated of_device_id table
Bernd Schubert (1):
IPoIB: Fix possible NULL dereference in ipoib_start_xmit()
Boaz Harrosh (2):
pnfs-obj: Bug when we are running out of bio
pnfs-obj: Fix the comp_index != 0 case
Chris Mason (1):
Btrfs: force unplugs when switching from high to regular priority bios
Curt Wohlgemuth (1):
ext4: Fix ext4_should_writeback_data() for no-journal mode
Dan Carpenter (2):
btrfs: memory leak in btrfs_add_inode_defrag()
btrfs: unlock on error in btrfs_file_llseek()
Daniel Mack (1):
ALSA: snd_usb_caiaq: track submitted output urbs
Daniel T Chen (1):
ALSA: ac97: Add HP Compaq dc5100 SFF(PT003AW) to Headphone Jack
Sense whitelist
Dave Kleikamp (1):
jfs: flush journal completely before releasing metadata inodes
David Daney (1):
PCI: OF: Don't crash when bridge parent is NULL.
David S. Miller (1):
sparc64: Set HAVE_C_RECORDMCOUNT
Geunsik Lim (1):
MAINTAINERS: Fix list of perf events source files
H Hartley Sweeten (1):
drivers/block/drbd/drbd_nl.c: use bitmap_parse instead of __bitmap_parse
Heiko Carstens (1):
nfs: add missing prefetch.h include
Herbert Poetzl (1):
block/genhd.c: remove useless cast in diskstats_show()
Ian Campbell (3):
mm: make HASHED_PAGE_VIRTUAL page_address' struct page argument const.
mm: fix __page_to_pfn for a const struct page argument
sparc: fix array bounds error setting up PCIC NMI trap
Jan Beulich (1):
xen/x86: replace order-based range checking of M2P table by linear one
Jeff Garzik (1):
[libata] sata_sil: fix used-uninit warning
Jeff Layton (1):
cifs: demote cERROR in build_path_from_dentry to cFYI
Jeff Mahoney (1):
btrfs: btrfs_permission's RO check shouldn't apply to device nodes
Jeff Moyer (2):
allow blk_flush_policy to return REQ_FSEQ_DATA independent of *FLUSH
block: fix flush machinery for stacking drivers with differring
flush flags
Jens Axboe (2):
bsg-lib: add module.h include
Revert "cfq: Remove special treatment for metadata rqs."
Jeremy Fitzhardinge (1):
xen/tracing: Fix tracing config option properly
Jesse Barnes (3):
drm/i915: show interrupt info on IVB
drm/i915: split out PCH refclk update code
drm/i915: set GFX_MODE to pre-Ivybridge default value even on Ivybridge
Jiaying Zhang (2):
ext4: call ext4_ioend_wait and ext4_flush_completed_IO in ext4_evict_inode
ext4: flush any pending end_io requests before DIO reads w/dioread_nolock
Jiri Olsa (1):
perf report: Use properly build_id kernel binaries
Jon Mason (2):
PCI: Set PCI-E Max Payload Size on fabric
PCI: export pcie_bus_configure_settings symbol
Jonas Aberg (1):
fat: fix build warning
Josef Bacik (3):
Btrfs: detect wether a device supports discard
Btrfs: set i_size properly when fallocating and we already
Btrfs: fix 64 bit divide problem
Josh Boyer (1):
perf tools: Fix build against newer glibc
Julia Lawall (2):
drivers/ata/sata_dwc_460ex.c: add missing kfree
ALSA: sound/aoa/fabrics/layout.c: remove unneeded kfree
Kay Sievers (4):
loop: replace linked list of allocated devices with an idr index
loop: add management interface for on-demand device allocation
loop: add BLK_DEV_LOOP_MIN_COUNT=%i to allow distros 0
pre-allocated loop devices
loop: fix deadlock when sysfs and LOOP_CLR_FD race against each other
Keith Packard (6):
drm/i915: Wait for LVDS panel power sequence
drm/i915: Leave LVDS registers unlocked
drm/i915: Fix PCH port pipe select in CPT disable paths
drm/i915: Remove unused 'reg' argument to dp_pipe_enabled
drm/i915: Can't do accurate vblank timestamps with UMS
drm/i915: Cannot set clock gating under UMS
Konrad Rzeszutek Wilk (1):
xen/blkback: Make description more obvious.
Li Zefan (1):
Btrfs: use plain page_address() in header fields setget functions
Lin Ming (1):
perf tools: Add group event scheduling option to perf record/stat
Linus Torvalds (1):
Linux 3.1-rc3
Mark Brown (1):
regmap: Fix bulk reads
Masami Hiramatsu (9):
perf probe: Fix a memory leak for scopes array
perf probe: Fix line walker to check CU correctly
perf probe: Fix to search nested inlined functions in CU
perf probe: Fix to walk all inline instances
perf probe: Warn when more than one line are given
perf probe: Fix to search local variables in appropriate scope
perf probe: Avoid searching variables in intermediate scopes
perf probe: Search concrete out-of-line instances
perf probe: Filter out redundant inline-instances
Mathias Krause (1):
i7core_edac: fixed typo in error count calculation
Matthew Garrett (3):
drm/radeon: Allow panel preferred EDID to override BIOS native mode
drm/radeon: re-POST the asic on Apple hardware when booted via EFI
Not all systems expose a firmware or platform mechanism for
changing the backlight intensity on i915, so add native driver
support.
Matthew Wilcox (1):
Move some REQ flags to the common bio/request area
Miao Xie (2):
Btrfs: fix wrong free space information
Btrfs: fix uninitialized sync_pending
Michael Witten (16):
Docs: MSI-HOWTO: Use the subjunctive, and change `can' to `may'
Docs: MSI-HOWTO: Use present tense and streamline some wording
Docs: MSI-HOWTO: `asked for' -> `requested'
Docs: MSI-HOWTO: Streamline some wording
Docs: MSI-HOWTO: Put the `because' subordinate clause first
Docs: MSI-HOWTO: Offset modifier with a comma, and insert `yet'
for emphasis
Docs: MSI-HOWTO: Insert `that'
Docs: MSI-HOWTO: Move a sentence to another paragraph
Docs: MSI-HOWTO: , -> ;
Docs: MSI-HOWTO: API -> function
Docs: MSI-HOWTO: Insert a comma
Docs: MSI-HOWTO: may -> might
Docs: MSI-HOWTO: Use `unknown ...' rather than `... know about.'
Docs: MSI-HOWTO: can -> could
Docs: MSI-HOWTO: Insert a comma
Docs: MSI-HOWTO: MSI -> MSIs
Mihai Moldovan (1):
fat: fix utf8 iocharset warning message
Mikael Pettersson (2):
sparc64: remove unnecessary macros from spinlock_64.h
sparc32: unbreak arch_write_unlock()
Mike Christie (1):
block: add bsg helper library
Namhyung Kim (1):
blktrace: add FLUSH/FUA support
Namjae Jeon (1):
fat: fat16 support maximum 4GB file/vol size as WinXP or 7.
Or Gerlitz (2):
IBiser: Fix wrong mask when sizeof (dma_addr_t) > sizeof (unsigned long)
IB/iser: Support iSCSI PDU padding
Peter Zijlstra (1):
lockdep: Fix wrong assumption in match_held_lock
Rafael J. Wysocki (1):
PM / Domains: Fix build for CONFIG_PM_RUNTIME unset
Ram Pai (3):
PCI : ability to relocate assigned pci-resources
PCI: make cardbus-bridge resources optional
PCI: code and comments cleanup
Randy Dunlap (7):
KVM: fix TASK_DELAY_ACCT kconfig warning
xen: xen-selfballoon.c needs more header files
x86: fix mm/fault.c build
xen: self-balloon needs module.h
KVM: uses TASKSTATS, depends on NET
irqdesc: fix new kernel-doc warning
pci: fix new kernel-doc warning in pci.c
Rusty Russell (2):
virtio: Add text copy of spec to Documentation/virtual.
lguest: allow booting guest with CONFIG_RELOCATABLE=y
Sage Weil (1):
Btrfs: truncate pages from clone ioctl target range
Sebastian Andrzej Siewior (2):
irq: Always set IRQF_ONESHOT if no primary handler is specified
irq: Track the owner of irq descriptor
Shaohua Li (2):
blk-throttle: correctly determine sync bio
block: improve rq_affinity placement
Shirish Pargaonkar (1):
cifs: Do not set cifs/ntfs acl using a file handle (try #4)
Stefan Bader (2):
xen-blkfront: Drop name and minor adjustments for emulated scsi devices
xen-blkfront: Fix one off warning about name clash
Stefan Richter (3):
firewire: cdev: fix 32 bit userland on 64 bit kernel compat corner cases
firewire: ohci: fix DMA unmapping in an error path
firewire: core: handle ack_busy when fetching the Config ROM
Stefano Stabellini (1):
xen: Do not enable PV IPIs when vector callback not present
Stephane Eranian (3):
perf list: Fix exit value
perf evlist: Fix missing event name init for default event
perf tools: Fix error handling of unknown events
Stephen Rothwell (1):
regmap: using module facilities requires module.h
Stephen Warren (1):
regmap: Specify a module license
Steve French (3):
[CIFS] Cleanup use of CONFIG_CIFS_STATS2 ifdef to make transport
routines more readable
[CIFS] possible memory corruption on mount
update cifs version to 1.75
Takashi Iwai (5):
ALSA: hda - Fix duplicated capture-volume creation for ALC268 models
ALSA: hda - Add "PCM" volume to vmaster slave list
ALSA: usb-audio - Fix missing mixer dB information
ALSA: hda - Don't spew too many ELD errors
ALSA: hda - Fix error check from snd_hda_get_conn_index() in
patch_cirrus.c
Tao Ma (2):
block: Make rq_affinity = 1 work as expected
ext4: Resolve the hang of direct i/o read in handling
EXT4_IO_END_UNWRITTEN.
Tejun Heo (1):
pata_via: disable ATAPI DMA on AVERATEC 3200
Theodore Ts'o (1):
ext4: fix nomblk_io_submit option so it correctly converts uninit blocks
Thomas Gleixner (3):
rtc: Handle errors correctly in rtc_irq_set_state()
rtc: Fix hrtimer deadlock
rtc: Limit RTC PIE frequency
Timo Warns (1):
befs: Validate length of long symbolic links.
Tony Luck (1):
[IA64] fix "allnoconfig" build
Trond Myklebust (2):
NFSv4.1: Fix the callback 'highest_used_slotid' behaviour
NFSv4.1: Return NFS4ERR_BADSESSION to callbacks during session resets
Tsutomu Itoh (1):
Btrfs: forced readonly when btrfs_drop_snapshot() fails
Vasiliy Kulikov (1):
perf: fix temporary file ownership check
Vivek Goyal (2):
cfq-iosched: Reduce linked group count upon group destruction
cfq-iosched: Add documentation about idling
Yinghai Lu (2):
PCI: honor child buses add_size in hot plug configuration
PCI: make SRIOV resources optional
jhbird.choi@samsung.com (1):
genirq: Fix wrong bit operation
liubo (3):
Btrfs: fix an oops of log replay
Btrfs: fix a bug of balance on full multi-disk partitions
Btrfs: check if there is enough space for balancing smarter
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2011-08-26 13:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-26 12:59 Linux 3.1-rc3 Pawel Sikora
-- strict thread matches above, loose matches on Subject: below --
2011-08-22 20:22 Linus Torvalds
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.