diff for duplicates of <3055462.VmN8MJVs7V@jernej-laptop>
diff --git a/a/1.txt b/N1/1.txt
index 5f37257..9cc1d8b 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -11,7 +11,7 @@ wrote:
> >> > TVs are added. Board specific DT should then connect them together
> >> > trough TCON TOP muxers to best fit the purpose of the board.
> >> >
-> >> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
+> >> > Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
> >> > ---
> >> >
> >> > arch/arm/boot/dts/sun8i-r40.dtsi | 269 +++++++++++++++++++++++++++++++
@@ -496,5 +496,13 @@ Jernej
> > You received this message because you are subscribed to the Google Groups
> > "linux-sunxi" group. To unsubscribe from this group and stop receiving
> > emails from it, send an email to
-> > linux-sunxi+unsubscribe@googlegroups.com. For more options, visit
-> > https://groups.google.com/d/optout.
\ No newline at end of file
+> > linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org For more options, visit
+> > https://groups.google.com/d/optout.
+
+
+
+
+--
+You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
+To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
+For more options, visit https://groups.google.com/d/optout.
\ No newline at end of file
diff --git a/a/content_digest b/N1/content_digest
index c15e951..3a59e9a 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -8,31 +8,34 @@
"ref\0CAGb2v66q3a9nNjkSP1rgh9voMToutDxHtY1x1Wpkf8eEmLWLAA\@mail.gmail.com\0"
]
[
- "From\0Jernej \305\240krabec <jernej.skrabec\@siol.net>\0"
+ "ref\0CAGb2v66q3a9nNjkSP1rgh9voMToutDxHtY1x1Wpkf8eEmLWLAA-JsoAwUIsXosN+BqQ9rBEUg\@public.gmane.org\0"
]
[
- "Subject\0Re: [linux-sunxi] Re: [PATCH v3 23/24] ARM: dts: sun8i: r40: Add HDMI pipeline\0"
+ "From\0Jernej \305\240krabec <jernej.skrabec-gGgVlfcn5nU\@public.gmane.org>\0"
+]
+[
+ "Subject\0Re: Re: [PATCH v3 23/24] ARM: dts: sun8i: r40: Add HDMI pipeline\0"
]
[
"Date\0Sun, 01 Jul 2018 12:41:44 +0200\0"
]
[
- "To\0Chen-Yu Tsai <wens\@csie.org>\0"
+ "To\0Chen-Yu Tsai <wens-jdAy2FN1RRM\@public.gmane.org>\0"
]
[
- "Cc\0Maxime Ripard <maxime.ripard\@bootlin.com>",
- " Rob Herring <robh+dt\@kernel.org>",
- " David Airlie <airlied\@linux.ie>",
- " Gustavo Padovan <gustavo\@padovan.org>",
- " Maarten Lankhorst <maarten.lankhorst\@linux.intel.com>",
- " Sean Paul <seanpaul\@chromium.org>",
- " Mark Rutland <mark.rutland\@arm.com>",
- " dri-devel <dri-devel\@lists.freedesktop.org>",
- " devicetree <devicetree\@vger.kernel.org>",
- " linux-arm-kernel <linux-arm-kernel\@lists.infradead.org>",
- " linux-kernel <linux-kernel\@vger.kernel.org>",
- " linux-clk <linux-clk\@vger.kernel.org>",
- " linux-sunxi <linux-sunxi\@googlegroups.com>\0"
+ "Cc\0Maxime Ripard <maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ\@public.gmane.org>",
+ " Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A\@public.gmane.org>",
+ " David Airlie <airlied-cv59FeDIM0c\@public.gmane.org>",
+ " Gustavo Padovan <gustavo-THi1TnShQwVAfugRpC6u6w\@public.gmane.org>",
+ " Maarten Lankhorst <maarten.lankhorst-VuQAYsv1563Yd54FQh9/CA\@public.gmane.org>",
+ " Sean Paul <seanpaul-F7+t8E8rja9g9hUCZPvPmw\@public.gmane.org>",
+ " Mark Rutland <mark.rutland-5wv7dgnIgG8\@public.gmane.org>",
+ " dri-devel <dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW\@public.gmane.org>",
+ " devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA\@public.gmane.org>",
+ " linux-arm-kernel <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r\@public.gmane.org>",
+ " linux-kernel <linux-kernel-u79uwXL29TY76Z2rM5mHXA\@public.gmane.org>",
+ " linux-clk <linux-clk-u79uwXL29TY76Z2rM5mHXA\@public.gmane.org>",
+ " linux-sunxi <linux-sunxi-/JYPxA39Uh5TLH3MbocFFw\@public.gmane.org>\0"
]
[
"\0000:1\0"
@@ -54,7 +57,7 @@
"> >> > TVs are added. Board specific DT should then connect them together\n",
"> >> > trough TCON TOP muxers to best fit the purpose of the board.\n",
"> >> > \n",
- "> >> > Signed-off-by: Jernej Skrabec <jernej.skrabec\@siol.net>\n",
+ "> >> > Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU\@public.gmane.org>\n",
"> >> > ---\n",
"> >> > \n",
"> >> > arch/arm/boot/dts/sun8i-r40.dtsi | 269 +++++++++++++++++++++++++++++++\n",
@@ -539,8 +542,16 @@
"> > You received this message because you are subscribed to the Google Groups\n",
"> > \"linux-sunxi\" group. To unsubscribe from this group and stop receiving\n",
"> > emails from it, send an email to\n",
- "> > linux-sunxi+unsubscribe\@googlegroups.com. For more options, visit\n",
- "> > https://groups.google.com/d/optout."
+ "> > linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0\@public.gmane.org For more options, visit\n",
+ "> > https://groups.google.com/d/optout.\n",
+ "\n",
+ "\n",
+ "\n",
+ "\n",
+ "-- \n",
+ "You received this message because you are subscribed to the Google Groups \"linux-sunxi\" group.\n",
+ "To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0\@public.gmane.org\n",
+ "For more options, visit https://groups.google.com/d/optout."
]
-201d2ee7a16671290efc11193facccde69330e0187d8ea4a4fd1af96c4b26440
+b7ac244877628f4c641646ac1b66f0ccf5f83d8534315d016d8f9d7f59c88286
diff --git a/a/1.txt b/N2/1.txt
index 5f37257..a8a9323 100644
--- a/a/1.txt
+++ b/N2/1.txt
@@ -1,7 +1,7 @@
-Dne četrtek, 28. junij 2018 ob 08:51:07 CEST je Chen-Yu Tsai napisal(a):
-> On Thu, Jun 28, 2018 at 1:15 PM, Jernej Škrabec <jernej.skrabec@siol.net>
+Dne ?etrtek, 28. junij 2018 ob 08:51:07 CEST je Chen-Yu Tsai napisal(a):
+> On Thu, Jun 28, 2018 at 1:15 PM, Jernej ?krabec <jernej.skrabec@siol.net>
wrote:
-> > Dne četrtek, 28. junij 2018 ob 04:50:09 CEST je Chen-Yu Tsai napisal(a):
+> > Dne ?etrtek, 28. junij 2018 ob 04:50:09 CEST je Chen-Yu Tsai napisal(a):
> >> On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec <jernej.skrabec@siol.net>
> >
> > wrote:
@@ -71,7 +71,7 @@ wrote:
> >> > #size-cells = <1>;
> >> > ranges;
> >> >
-> >> > + display_clocks: clock@1000000 {
+> >> > + display_clocks: clock at 1000000 {
> >> > + compatible = "allwinner,sun8i-r40-de2-clk",
> >> > + "allwinner,sun8i-h3-de2-clk";
> >> > + reg = <0x01000000 0x100000>;
@@ -84,7 +84,7 @@ wrote:
> >> > + #reset-cells = <1>;
> >> > + };
> >> > +
-> >> > + mixer0: mixer@1100000 {
+> >> > + mixer0: mixer at 1100000 {
> >> > + compatible = "allwinner,sun8i-r40-de2-mixer-0";
> >> > + reg = <0x01100000 0x100000>;
> >> > + clocks = <&display_clocks CLK_BUS_MIXER0>,
@@ -97,7 +97,7 @@ wrote:
> >> > + #address-cells = <1>;
> >> > + #size-cells = <0>;
> >> > +
-> >> > + mixer0_out: port@1 {
+> >> > + mixer0_out: port at 1 {
> >> > + reg = <1>;
> >> > + mixer0_out_tcon_top: endpoint {
> >> > + remote-endpoint =
@@ -107,7 +107,7 @@ wrote:
> >> > + };
> >> > + };
> >> > +
-> >> > + mixer1: mixer@1200000 {
+> >> > + mixer1: mixer at 1200000 {
> >> > + compatible = "allwinner,sun8i-r40-de2-mixer-1";
> >> > + reg = <0x01200000 0x100000>;
> >> > + clocks = <&display_clocks CLK_BUS_MIXER1>,
@@ -120,7 +120,7 @@ wrote:
> >> > + #address-cells = <1>;
> >> > + #size-cells = <0>;
> >> > +
-> >> > + mixer1_out: port@1 {
+> >> > + mixer1_out: port at 1 {
> >> > + reg = <1>;
> >> > + mixer1_out_tcon_top: endpoint {
> >> > + remote-endpoint =
@@ -131,7 +131,7 @@ wrote:
> >> > + };
> >> > +
> >> >
-> >> > nmi_intc: interrupt-controller@1c00030 {
+> >> > nmi_intc: interrupt-controller at 1c00030 {
> >> >
> >> > compatible = "allwinner,sun7i-a20-sc-nmi";
> >> > interrupt-controller;
@@ -142,7 +142,7 @@ wrote:
> >> >
> >> > };
> >> >
-> >> > + tcon_top: tcon-top@1c70000 {
+> >> > + tcon_top: tcon-top at 1c70000 {
> >> > + compatible = "allwinner,sun8i-r40-tcon-top";
> >> > + reg = <0x01c70000 0x1000>;
> >> > + clocks = <&ccu CLK_BUS_TCON_TOP>,
@@ -167,7 +167,7 @@ wrote:
> >> > + #address-cells = <1>;
> >> > + #size-cells = <0>;
> >> > +
-> >> > + tcon_top_mixer0_in: port@0 {
+> >> > + tcon_top_mixer0_in: port at 0 {
> >> > + reg = <0>;
> >> > +
> >> > + tcon_top_mixer0_in_mixer0:
@@ -178,29 +178,29 @@ wrote:
> >> >
> >> > + };
> >> > +
-> >> > + tcon_top_mixer0_out: port@1 {
+> >> > + tcon_top_mixer0_out: port at 1 {
> >> > + #address-cells = <1>;
> >> > + #size-cells = <0>;
> >> > + reg = <1>;
> >> > +
> >> > + tcon_top_mixer0_out_tcon_lcd0:
-> >> > endpoint@0 { + reg = <0>;
+> >> > endpoint at 0 { + reg = <0>;
> >> > + };
> >> > +
> >> > + tcon_top_mixer0_out_tcon_lcd1:
-> >> > endpoint@1 { + reg = <1>;
+> >> > endpoint at 1 { + reg = <1>;
> >> > + };
> >> > +
> >> > + tcon_top_mixer0_out_tcon_tv0:
-> >> > endpoint@2 { + reg = <2>;
+> >> > endpoint at 2 { + reg = <2>;
> >> > + };
> >> > +
> >> > + tcon_top_mixer0_out_tcon_tv1:
-> >> > endpoint@3 { + reg = <3>;
+> >> > endpoint at 3 { + reg = <3>;
> >> > + };
> >> > + };
> >> > +
-> >> > + tcon_top_mixer1_in: port@2 {
+> >> > + tcon_top_mixer1_in: port at 2 {
> >> > + reg = <2>;
> >> > +
> >> > + tcon_top_mixer1_in_mixer1:
@@ -211,43 +211,43 @@ wrote:
> >> >
> >> > + };
> >> > +
-> >> > + tcon_top_mixer1_out: port@3 {
+> >> > + tcon_top_mixer1_out: port at 3 {
> >> > + #address-cells = <1>;
> >> > + #size-cells = <0>;
> >> > + reg = <3>;
> >> > +
> >> > + tcon_top_mixer1_out_tcon_lcd0:
-> >> > endpoint@0 { + reg = <0>;
+> >> > endpoint at 0 { + reg = <0>;
> >> > + };
> >> > +
> >> > + tcon_top_mixer1_out_tcon_lcd1:
-> >> > endpoint@1 { + reg = <1>;
+> >> > endpoint at 1 { + reg = <1>;
> >> > + };
> >> > +
> >> > + tcon_top_mixer1_out_tcon_tv0:
-> >> > endpoint@2 { + reg = <2>;
+> >> > endpoint at 2 { + reg = <2>;
> >> > + };
> >> > +
> >> > + tcon_top_mixer1_out_tcon_tv1:
-> >> > endpoint@3 { + reg = <3>;
+> >> > endpoint at 3 { + reg = <3>;
> >> > + };
> >> > + };
> >> > +
-> >> > + tcon_top_hdmi_in: port@4 {
+> >> > + tcon_top_hdmi_in: port at 4 {
> >> > + #address-cells = <1>;
> >> > + #size-cells = <0>;
> >> > + reg = <4>;
> >> > +
> >> > + tcon_top_hdmi_in_tcon_tv0:
-> >> > endpoint@0 { + reg = <0>;
+> >> > endpoint at 0 { + reg = <0>;
> >> > + };
> >> > +
> >> > + tcon_top_hdmi_in_tcon_tv1:
-> >> > endpoint@1 { + reg = <1>;
+> >> > endpoint at 1 { + reg = <1>;
> >> > + };
> >> > + };
> >> > +
-> >> > + tcon_top_hdmi_out: port@5 {
+> >> > + tcon_top_hdmi_out: port at 5 {
> >> > + reg = <5>;
> >> > +
> >> > + tcon_top_hdmi_out_hdmi:
@@ -258,7 +258,7 @@ wrote:
> >> > + };
> >> > + };
> >> > +
-> >> > + tcon_tv0: lcd-controller@1c73000 {
+> >> > + tcon_tv0: lcd-controller at 1c73000 {
> >> > + compatible = "allwinner,sun8i-r40-tcon-tv",
> >> > + "allwinner,sun8i-a83t-tcon-tv";
> >> > + reg = <0x01c73000 0x1000>;
@@ -273,17 +273,17 @@ wrote:
> >> > + #address-cells = <1>;
> >> > + #size-cells = <0>;
> >> > +
-> >> > + tcon_tv0_in: port@0 {
+> >> > + tcon_tv0_in: port at 0 {
> >> > + reg = <0>;
> >> > + };
> >> > +
-> >> > + tcon_tv0_out: port@1 {
+> >> > + tcon_tv0_out: port at 1 {
> >> > + reg = <1>;
> >> > + };
> >> > + };
> >> > + };
> >> > +
-> >> > + tcon_tv1: lcd-controller@1c74000 {
+> >> > + tcon_tv1: lcd-controller at 1c74000 {
> >> > + compatible = "allwinner,sun8i-r40-tcon-tv",
> >> > + "allwinner,sun8i-a83t-tcon-tv";
> >> > + reg = <0x01c74000 0x1000>;
@@ -298,11 +298,11 @@ wrote:
> >> > + #address-cells = <1>;
> >> > + #size-cells = <0>;
> >> > +
-> >> > + tcon_tv1_in: port@0 {
+> >> > + tcon_tv1_in: port at 0 {
> >> > + reg = <0>;
> >> > + };
> >> > +
-> >> > + tcon_tv1_out: port@1 {
+> >> > + tcon_tv1_out: port at 1 {
> >> > + reg = <1>;
> >>
> >> You are missing the remote-endpoints for all the TCON-TOP <-> TCON
@@ -425,7 +425,7 @@ Jernej
> >> > + };
> >> > +
> >> >
-> >> > gic: interrupt-controller@1c81000 {
+> >> > gic: interrupt-controller at 1c81000 {
> >> >
> >> > compatible = "arm,gic-400";
> >> > reg = <0x01c81000 0x1000>,
@@ -440,7 +440,7 @@ Jernej
> >> > };
> >> >
> >> > +
-> >> > + hdmi: hdmi@1ee0000 {
+> >> > + hdmi: hdmi at 1ee0000 {
> >> > + compatible = "allwinner,sun8i-r40-dw-hdmi",
> >> > + "allwinner,sun8i-a83t-dw-hdmi";
> >> > + reg = <0x01ee0000 0x10000>;
@@ -459,7 +459,7 @@ Jernej
> >> > + #address-cells = <1>;
> >> > + #size-cells = <0>;
> >> > +
-> >> > + hdmi_in: port@0 {
+> >> > + hdmi_in: port at 0 {
> >> > + reg = <0>;
> >> > +
> >> > + hdmi_in_tcon_top: endpoint {
@@ -467,13 +467,13 @@ Jernej
> >> > <&tcon_top_hdmi_out_hdmi>; + };
> >> > + };
> >> > +
-> >> > + hdmi_out: port@1 {
+> >> > + hdmi_out: port at 1 {
> >> > + reg = <1>;
> >> > + };
> >> > + };
> >> > + };
> >> > +
-> >> > + hdmi_phy: hdmi-phy@1ef0000 {
+> >> > + hdmi_phy: hdmi-phy at 1ef0000 {
> >> > + compatible = "allwinner,sun8i-r40-hdmi-phy",
> >> > + "allwinner,sun50i-a64-hdmi-phy";
> >> > + reg = <0x01ef0000 0x10000>;
@@ -496,5 +496,5 @@ Jernej
> > You received this message because you are subscribed to the Google Groups
> > "linux-sunxi" group. To unsubscribe from this group and stop receiving
> > emails from it, send an email to
-> > linux-sunxi+unsubscribe@googlegroups.com. For more options, visit
+> > linux-sunxi+unsubscribe at googlegroups.com. For more options, visit
> > https://groups.google.com/d/optout.
\ No newline at end of file
diff --git a/a/content_digest b/N2/content_digest
index c15e951..1d6d200 100644
--- a/a/content_digest
+++ b/N2/content_digest
@@ -8,31 +8,16 @@
"ref\0CAGb2v66q3a9nNjkSP1rgh9voMToutDxHtY1x1Wpkf8eEmLWLAA\@mail.gmail.com\0"
]
[
- "From\0Jernej \305\240krabec <jernej.skrabec\@siol.net>\0"
+ "From\0jernej.skrabec\@siol.net (Jernej \305\240krabec)\0"
]
[
- "Subject\0Re: [linux-sunxi] Re: [PATCH v3 23/24] ARM: dts: sun8i: r40: Add HDMI pipeline\0"
+ "Subject\0[linux-sunxi] Re: [PATCH v3 23/24] ARM: dts: sun8i: r40: Add HDMI pipeline\0"
]
[
"Date\0Sun, 01 Jul 2018 12:41:44 +0200\0"
]
[
- "To\0Chen-Yu Tsai <wens\@csie.org>\0"
-]
-[
- "Cc\0Maxime Ripard <maxime.ripard\@bootlin.com>",
- " Rob Herring <robh+dt\@kernel.org>",
- " David Airlie <airlied\@linux.ie>",
- " Gustavo Padovan <gustavo\@padovan.org>",
- " Maarten Lankhorst <maarten.lankhorst\@linux.intel.com>",
- " Sean Paul <seanpaul\@chromium.org>",
- " Mark Rutland <mark.rutland\@arm.com>",
- " dri-devel <dri-devel\@lists.freedesktop.org>",
- " devicetree <devicetree\@vger.kernel.org>",
- " linux-arm-kernel <linux-arm-kernel\@lists.infradead.org>",
- " linux-kernel <linux-kernel\@vger.kernel.org>",
- " linux-clk <linux-clk\@vger.kernel.org>",
- " linux-sunxi <linux-sunxi\@googlegroups.com>\0"
+ "To\0linux-arm-kernel\@lists.infradead.org\0"
]
[
"\0000:1\0"
@@ -41,10 +26,10 @@
"b\0"
]
[
- "Dne \304\215etrtek, 28. junij 2018 ob 08:51:07 CEST je Chen-Yu Tsai napisal(a):\n",
- "> On Thu, Jun 28, 2018 at 1:15 PM, Jernej \305\240krabec <jernej.skrabec\@siol.net> \n",
+ "Dne ?etrtek, 28. junij 2018 ob 08:51:07 CEST je Chen-Yu Tsai napisal(a):\n",
+ "> On Thu, Jun 28, 2018 at 1:15 PM, Jernej ?krabec <jernej.skrabec\@siol.net> \n",
"wrote:\n",
- "> > Dne \304\215etrtek, 28. junij 2018 ob 04:50:09 CEST je Chen-Yu Tsai napisal(a):\n",
+ "> > Dne ?etrtek, 28. junij 2018 ob 04:50:09 CEST je Chen-Yu Tsai napisal(a):\n",
"> >> On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec <jernej.skrabec\@siol.net>\n",
"> > \n",
"> > wrote:\n",
@@ -114,7 +99,7 @@
"> >> > #size-cells = <1>;\n",
"> >> > ranges;\n",
"> >> > \n",
- "> >> > + display_clocks: clock\@1000000 {\n",
+ "> >> > + display_clocks: clock at 1000000 {\n",
"> >> > + compatible = \"allwinner,sun8i-r40-de2-clk\",\n",
"> >> > + \"allwinner,sun8i-h3-de2-clk\";\n",
"> >> > + reg = <0x01000000 0x100000>;\n",
@@ -127,7 +112,7 @@
"> >> > + #reset-cells = <1>;\n",
"> >> > + };\n",
"> >> > +\n",
- "> >> > + mixer0: mixer\@1100000 {\n",
+ "> >> > + mixer0: mixer at 1100000 {\n",
"> >> > + compatible = \"allwinner,sun8i-r40-de2-mixer-0\";\n",
"> >> > + reg = <0x01100000 0x100000>;\n",
"> >> > + clocks = <&display_clocks CLK_BUS_MIXER0>,\n",
@@ -140,7 +125,7 @@
"> >> > + #address-cells = <1>;\n",
"> >> > + #size-cells = <0>;\n",
"> >> > +\n",
- "> >> > + mixer0_out: port\@1 {\n",
+ "> >> > + mixer0_out: port at 1 {\n",
"> >> > + reg = <1>;\n",
"> >> > + mixer0_out_tcon_top: endpoint {\n",
"> >> > + remote-endpoint =\n",
@@ -150,7 +135,7 @@
"> >> > + };\n",
"> >> > + };\n",
"> >> > +\n",
- "> >> > + mixer1: mixer\@1200000 {\n",
+ "> >> > + mixer1: mixer at 1200000 {\n",
"> >> > + compatible = \"allwinner,sun8i-r40-de2-mixer-1\";\n",
"> >> > + reg = <0x01200000 0x100000>;\n",
"> >> > + clocks = <&display_clocks CLK_BUS_MIXER1>,\n",
@@ -163,7 +148,7 @@
"> >> > + #address-cells = <1>;\n",
"> >> > + #size-cells = <0>;\n",
"> >> > +\n",
- "> >> > + mixer1_out: port\@1 {\n",
+ "> >> > + mixer1_out: port at 1 {\n",
"> >> > + reg = <1>;\n",
"> >> > + mixer1_out_tcon_top: endpoint {\n",
"> >> > + remote-endpoint =\n",
@@ -174,7 +159,7 @@
"> >> > + };\n",
"> >> > +\n",
"> >> > \n",
- "> >> > nmi_intc: interrupt-controller\@1c00030 {\n",
+ "> >> > nmi_intc: interrupt-controller at 1c00030 {\n",
"> >> > \n",
"> >> > compatible = \"allwinner,sun7i-a20-sc-nmi\";\n",
"> >> > interrupt-controller;\n",
@@ -185,7 +170,7 @@
"> >> > \n",
"> >> > };\n",
"> >> > \n",
- "> >> > + tcon_top: tcon-top\@1c70000 {\n",
+ "> >> > + tcon_top: tcon-top at 1c70000 {\n",
"> >> > + compatible = \"allwinner,sun8i-r40-tcon-top\";\n",
"> >> > + reg = <0x01c70000 0x1000>;\n",
"> >> > + clocks = <&ccu CLK_BUS_TCON_TOP>,\n",
@@ -210,7 +195,7 @@
"> >> > + #address-cells = <1>;\n",
"> >> > + #size-cells = <0>;\n",
"> >> > +\n",
- "> >> > + tcon_top_mixer0_in: port\@0 {\n",
+ "> >> > + tcon_top_mixer0_in: port at 0 {\n",
"> >> > + reg = <0>;\n",
"> >> > +\n",
"> >> > + tcon_top_mixer0_in_mixer0:\n",
@@ -221,29 +206,29 @@
"> >> > \n",
"> >> > + };\n",
"> >> > +\n",
- "> >> > + tcon_top_mixer0_out: port\@1 {\n",
+ "> >> > + tcon_top_mixer0_out: port at 1 {\n",
"> >> > + #address-cells = <1>;\n",
"> >> > + #size-cells = <0>;\n",
"> >> > + reg = <1>;\n",
"> >> > +\n",
"> >> > + tcon_top_mixer0_out_tcon_lcd0:\n",
- "> >> > endpoint\@0 { + reg = <0>;\n",
+ "> >> > endpoint at 0 { + reg = <0>;\n",
"> >> > + };\n",
"> >> > +\n",
"> >> > + tcon_top_mixer0_out_tcon_lcd1:\n",
- "> >> > endpoint\@1 { + reg = <1>;\n",
+ "> >> > endpoint at 1 { + reg = <1>;\n",
"> >> > + };\n",
"> >> > +\n",
"> >> > + tcon_top_mixer0_out_tcon_tv0:\n",
- "> >> > endpoint\@2 { + reg = <2>;\n",
+ "> >> > endpoint at 2 { + reg = <2>;\n",
"> >> > + };\n",
"> >> > +\n",
"> >> > + tcon_top_mixer0_out_tcon_tv1:\n",
- "> >> > endpoint\@3 { + reg = <3>;\n",
+ "> >> > endpoint at 3 { + reg = <3>;\n",
"> >> > + };\n",
"> >> > + };\n",
"> >> > +\n",
- "> >> > + tcon_top_mixer1_in: port\@2 {\n",
+ "> >> > + tcon_top_mixer1_in: port at 2 {\n",
"> >> > + reg = <2>;\n",
"> >> > +\n",
"> >> > + tcon_top_mixer1_in_mixer1:\n",
@@ -254,43 +239,43 @@
"> >> > \n",
"> >> > + };\n",
"> >> > +\n",
- "> >> > + tcon_top_mixer1_out: port\@3 {\n",
+ "> >> > + tcon_top_mixer1_out: port at 3 {\n",
"> >> > + #address-cells = <1>;\n",
"> >> > + #size-cells = <0>;\n",
"> >> > + reg = <3>;\n",
"> >> > +\n",
"> >> > + tcon_top_mixer1_out_tcon_lcd0:\n",
- "> >> > endpoint\@0 { + reg = <0>;\n",
+ "> >> > endpoint at 0 { + reg = <0>;\n",
"> >> > + };\n",
"> >> > +\n",
"> >> > + tcon_top_mixer1_out_tcon_lcd1:\n",
- "> >> > endpoint\@1 { + reg = <1>;\n",
+ "> >> > endpoint at 1 { + reg = <1>;\n",
"> >> > + };\n",
"> >> > +\n",
"> >> > + tcon_top_mixer1_out_tcon_tv0:\n",
- "> >> > endpoint\@2 { + reg = <2>;\n",
+ "> >> > endpoint at 2 { + reg = <2>;\n",
"> >> > + };\n",
"> >> > +\n",
"> >> > + tcon_top_mixer1_out_tcon_tv1:\n",
- "> >> > endpoint\@3 { + reg = <3>;\n",
+ "> >> > endpoint at 3 { + reg = <3>;\n",
"> >> > + };\n",
"> >> > + };\n",
"> >> > +\n",
- "> >> > + tcon_top_hdmi_in: port\@4 {\n",
+ "> >> > + tcon_top_hdmi_in: port at 4 {\n",
"> >> > + #address-cells = <1>;\n",
"> >> > + #size-cells = <0>;\n",
"> >> > + reg = <4>;\n",
"> >> > +\n",
"> >> > + tcon_top_hdmi_in_tcon_tv0:\n",
- "> >> > endpoint\@0 { + reg = <0>;\n",
+ "> >> > endpoint at 0 { + reg = <0>;\n",
"> >> > + };\n",
"> >> > +\n",
"> >> > + tcon_top_hdmi_in_tcon_tv1:\n",
- "> >> > endpoint\@1 { + reg = <1>;\n",
+ "> >> > endpoint at 1 { + reg = <1>;\n",
"> >> > + };\n",
"> >> > + };\n",
"> >> > +\n",
- "> >> > + tcon_top_hdmi_out: port\@5 {\n",
+ "> >> > + tcon_top_hdmi_out: port at 5 {\n",
"> >> > + reg = <5>;\n",
"> >> > +\n",
"> >> > + tcon_top_hdmi_out_hdmi:\n",
@@ -301,7 +286,7 @@
"> >> > + };\n",
"> >> > + };\n",
"> >> > +\n",
- "> >> > + tcon_tv0: lcd-controller\@1c73000 {\n",
+ "> >> > + tcon_tv0: lcd-controller at 1c73000 {\n",
"> >> > + compatible = \"allwinner,sun8i-r40-tcon-tv\",\n",
"> >> > + \"allwinner,sun8i-a83t-tcon-tv\";\n",
"> >> > + reg = <0x01c73000 0x1000>;\n",
@@ -316,17 +301,17 @@
"> >> > + #address-cells = <1>;\n",
"> >> > + #size-cells = <0>;\n",
"> >> > +\n",
- "> >> > + tcon_tv0_in: port\@0 {\n",
+ "> >> > + tcon_tv0_in: port at 0 {\n",
"> >> > + reg = <0>;\n",
"> >> > + };\n",
"> >> > +\n",
- "> >> > + tcon_tv0_out: port\@1 {\n",
+ "> >> > + tcon_tv0_out: port at 1 {\n",
"> >> > + reg = <1>;\n",
"> >> > + };\n",
"> >> > + };\n",
"> >> > + };\n",
"> >> > +\n",
- "> >> > + tcon_tv1: lcd-controller\@1c74000 {\n",
+ "> >> > + tcon_tv1: lcd-controller at 1c74000 {\n",
"> >> > + compatible = \"allwinner,sun8i-r40-tcon-tv\",\n",
"> >> > + \"allwinner,sun8i-a83t-tcon-tv\";\n",
"> >> > + reg = <0x01c74000 0x1000>;\n",
@@ -341,11 +326,11 @@
"> >> > + #address-cells = <1>;\n",
"> >> > + #size-cells = <0>;\n",
"> >> > +\n",
- "> >> > + tcon_tv1_in: port\@0 {\n",
+ "> >> > + tcon_tv1_in: port at 0 {\n",
"> >> > + reg = <0>;\n",
"> >> > + };\n",
"> >> > +\n",
- "> >> > + tcon_tv1_out: port\@1 {\n",
+ "> >> > + tcon_tv1_out: port at 1 {\n",
"> >> > + reg = <1>;\n",
"> >> \n",
"> >> You are missing the remote-endpoints for all the TCON-TOP <-> TCON\n",
@@ -468,7 +453,7 @@
"> >> > + };\n",
"> >> > +\n",
"> >> > \n",
- "> >> > gic: interrupt-controller\@1c81000 {\n",
+ "> >> > gic: interrupt-controller at 1c81000 {\n",
"> >> > \n",
"> >> > compatible = \"arm,gic-400\";\n",
"> >> > reg = <0x01c81000 0x1000>,\n",
@@ -483,7 +468,7 @@
"> >> > };\n",
"> >> > \n",
"> >> > +\n",
- "> >> > + hdmi: hdmi\@1ee0000 {\n",
+ "> >> > + hdmi: hdmi at 1ee0000 {\n",
"> >> > + compatible = \"allwinner,sun8i-r40-dw-hdmi\",\n",
"> >> > + \"allwinner,sun8i-a83t-dw-hdmi\";\n",
"> >> > + reg = <0x01ee0000 0x10000>;\n",
@@ -502,7 +487,7 @@
"> >> > + #address-cells = <1>;\n",
"> >> > + #size-cells = <0>;\n",
"> >> > +\n",
- "> >> > + hdmi_in: port\@0 {\n",
+ "> >> > + hdmi_in: port at 0 {\n",
"> >> > + reg = <0>;\n",
"> >> > +\n",
"> >> > + hdmi_in_tcon_top: endpoint {\n",
@@ -510,13 +495,13 @@
"> >> > <&tcon_top_hdmi_out_hdmi>; + };\n",
"> >> > + };\n",
"> >> > +\n",
- "> >> > + hdmi_out: port\@1 {\n",
+ "> >> > + hdmi_out: port at 1 {\n",
"> >> > + reg = <1>;\n",
"> >> > + };\n",
"> >> > + };\n",
"> >> > + };\n",
"> >> > +\n",
- "> >> > + hdmi_phy: hdmi-phy\@1ef0000 {\n",
+ "> >> > + hdmi_phy: hdmi-phy at 1ef0000 {\n",
"> >> > + compatible = \"allwinner,sun8i-r40-hdmi-phy\",\n",
"> >> > + \"allwinner,sun50i-a64-hdmi-phy\";\n",
"> >> > + reg = <0x01ef0000 0x10000>;\n",
@@ -539,8 +524,8 @@
"> > You received this message because you are subscribed to the Google Groups\n",
"> > \"linux-sunxi\" group. To unsubscribe from this group and stop receiving\n",
"> > emails from it, send an email to\n",
- "> > linux-sunxi+unsubscribe\@googlegroups.com. For more options, visit\n",
+ "> > linux-sunxi+unsubscribe at googlegroups.com. For more options, visit\n",
"> > https://groups.google.com/d/optout."
]
-201d2ee7a16671290efc11193facccde69330e0187d8ea4a4fd1af96c4b26440
+390712e387c15e14bf30808b4fa8b01cc2b963cd2dbcddc3af194cb5595951c4
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.