From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Mon, 20 Jan 2020 21:21:16 +0100 Subject: [PATCH 5/5] ARM: dts: stm32: Add DH Electronics DHCOM SoM and PDK2 board In-Reply-To: References: <20200110002839.97868-1-marex@denx.de> <20200110002839.97868-5-marex@denx.de> Message-ID: <3091401a-bfab-e64a-8985-f26e4a5ad3b9@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 1/17/20 5:32 PM, Patrick DELAUNAY wrote: > Hi Marek, Hi, >> From: Patrick DELAUNAY >> Sent: lundi 13 janvier 2020 15:05 >> >> Hi Marek, >> >>> From: Marek Vasut >>> Sent: vendredi 10 janvier 2020 01:29 >>> >>> Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier board. >>> This is an SoM with STM32MP157C and an evaluation kit. The baseboard >>> provides Ethernet, UART, USB, CAN and optional display. >>> Signed-off-by: Marek Vasut >>> Cc: Patrick Delaunay >>> Cc: Patrice Chotard >>> --- > > For information, I merge the serie, except this patch 5/5 on master brach and I sent a pull request for u-boot-stm32-20200117. > > For this patch, I propose a rebase and also many modification liked to my previous remark > (I remove ST only parts for stboard command, and also led and key management) . > > This proposal is present in the branch https://gitlab.denx.de/u-boot/custodians/u-boot-stm/tree/next > https://gitlab.denx.de/u-boot/custodians/u-boot-stm/commit/db48e11b1eccf23f3f9ba26e886a798e74df6a01 > > your initial patch is in applied https://gitlab.denx.de/u-boot/custodians/u-boot-stm/tree/dh > > > Can you test the "next" branch and check the difference with your initial patch ( applied in dh branch > https://gitlab.denx.de/u-boot/custodians/u-boot-stm/tree/dh > => https://gitlab.denx.de/u-boot/custodians/u-boot-stm/commit/0ab3ce72f82b946ac0924dfcdc082792f325eb68 ) > > I hope that I don't remove something really present on the SOM. > > If you are OK, can you send a V2 version with the "next" branch content and I will integrate it in master branch for next pull request. Will do. I will rebase on master once your PR is in and then send V2. [...]