From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tomasz Figa Subject: Re: [PATCH v3 01/11] clk: samsung: add common clock framework helper functions for Samsung platforms Date: Thu, 15 Nov 2012 00:12:21 +0100 Message-ID: <3129811.yIGKilgVGz@flatron> References: <1352930853-12268-1-git-send-email-thomas.abraham@linaro.org> <1352930853-12268-2-git-send-email-thomas.abraham@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7Bit Return-path: In-Reply-To: <1352930853-12268-2-git-send-email-thomas.abraham@linaro.org> Sender: linux-samsung-soc-owner@vger.kernel.org To: Thomas Abraham Cc: linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, devicetree-discuss@lists.ozlabs.org, mturquette@ti.com, mturquette@linaro.org, kgene.kim@samsung.com, t.figa@samsung.com, sylvester.nawrocki@gmail.com List-Id: devicetree@vger.kernel.org Hi Thomas, Looks mostly good, but I have some minor comments inline. On Thursday 15 of November 2012 03:37:23 Thomas Abraham wrote: > All Samsung platforms include different types of clock including > fixed-rate, mux, divider and gate clock types. There are typically > hundreds of such clocks on each of the Samsung platforms. To enable > Samsung platforms to register these clocks using the common clock > framework, a bunch of utility functions are introduced here which > simplify the clock registration process. The clocks are usually > statically instantiated and registered with common clock framework. > > Cc: Mike Turquette > Cc: Kukjin Kim > Signed-off-by: Thomas Abraham > --- > drivers/clk/Makefile | 1 + > drivers/clk/samsung/Makefile | 5 + > drivers/clk/samsung/clk.c | 176 ++++++++++++++++++++++++++++++++++ > drivers/clk/samsung/clk.h | 218 > ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 400 > insertions(+), 0 deletions(-) > create mode 100644 drivers/clk/samsung/Makefile > create mode 100644 drivers/clk/samsung/clk.c > create mode 100644 drivers/clk/samsung/clk.h > > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile > index 2701235..808f8e1 100644 > --- a/drivers/clk/Makefile > +++ b/drivers/clk/Makefile > @@ -19,6 +19,7 @@ endif > obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o > obj-$(CONFIG_ARCH_U8500) += ux500/ > obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o > +obj-$(CONFIG_PLAT_SAMSUNG) += samsung/ > > # Chip specific > obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o > diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile > new file mode 100644 > index 0000000..3f926b0 > --- /dev/null > +++ b/drivers/clk/samsung/Makefile > @@ -0,0 +1,5 @@ > +# > +# Samsung Clock specific Makefile > +# > + > +obj-$(CONFIG_PLAT_SAMSUNG) += clk.o > diff --git a/drivers/clk/samsung/clk.c b/drivers/clk/samsung/clk.c > new file mode 100644 > index 0000000..ebc6fb6 > --- /dev/null > +++ b/drivers/clk/samsung/clk.c > @@ -0,0 +1,176 @@ > +/* > + * Copyright (c) 2012 Samsung Electronics Co., Ltd. > + * Copyright (c) 2012 Linaro Ltd. > + * Author: Thomas Abraham > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as + > * published by the Free Software Foundation. > + * > + * This file includes utility functions to register clocks to common > + * clock framework for Samsung platforms. > +*/ > + > +#include "clk.h" > + > +static DEFINE_SPINLOCK(lock); > +static struct clk **clk_table; > +static struct clk_onecell_data clk_data; > +void __iomem *reg_base; Shouldn't it be static? > + > +/* setup the essentials required to support clock lookup using ccf */ > +void __init samsung_clk_init(struct device_node *np, void __iomem > *base, + unsigned long nr_clks) > +{ > + reg_base = base; > + if (!np) > + return; > + > + clk_table = kzalloc(sizeof(struct clk *) * nr_clks, GFP_KERNEL); > + if (!clk_table) > + panic("could not allocate clock lookup table\n"); > + > + clk_data.clks = clk_table; > + clk_data.clk_num = nr_clks; > + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); > +} > + > +/* add a clock instance to the clock lookup table used for dt based > lookup */ +void samsung_clk_add_lookup(struct clk *clk, unsigned int > id) +{ > + if (clk_table && id) I'm not sure if we really need this kind of checks, but if we do, then shouldn't we also check id against clk_data.clk_num to prevent out of bound index? > + clk_table[id] = clk; > +} > + > +/* register a list of fixed clocks */ > +void __init samsung_clk_register_fixed_rate( > + struct samsung_fixed_rate_clock *list, unsigned int nr_clk) > +{ > + struct clk *clk; > + unsigned int idx, ret; > + > + for (idx = 0; idx < nr_clk; idx++, list++) { > + clk = clk_register_fixed_rate(NULL, list->name, > + list->parent_name, list->flags, list->fixed_rate); > + if (IS_ERR(clk)) { > + pr_err("%s: failed to register clock %s\n", __func__, > + list->name); > + continue; > + } > + > + samsung_clk_add_lookup(clk, list->id); > + > + /* > + * Unconditionally add a clock lookup for the fixed rate clocks. > + * There are not many of these on any of Samsung platforms. > + */ > + ret = clk_register_clkdev(clk, list->name, NULL); > + if (ret) > + pr_err("%s: failed to register clock lookup for %s", > + __func__, list->name); > + } > +} > + > +/* register a list of mux clocks */ > +void __init samsung_clk_register_mux(struct samsung_mux_clock *list, > + unsigned int nr_clk) > +{ > + struct clk *clk; > + unsigned int idx, ret; > + > + for (idx = 0; idx < nr_clk; idx++, list++) { > + clk = clk_register_mux(NULL, list->name, list->parent_names, > + list->num_parents, list->flags, reg_base + list->offset, > + list->shift, list->width, list->mux_flags, &lock); > + if (IS_ERR(clk)) { > + pr_err("%s: failed to register clock %s\n", __func__, > + list->name); > + continue; > + } > + > + samsung_clk_add_lookup(clk, list->id); > + > + /* register a clock lookup only if a clock alias is specified */ > + if (list->alias) { > + ret = clk_register_clkdev(clk, list->alias, > + list->dev_name); > + if (ret) > + pr_err("%s: failed to register lookup %s\n", > + __func__, list->alias); > + } > + } > +} > + > +/* register a list of div clocks */ > +void __init samsung_clk_register_div(struct samsung_div_clock *list, > + unsigned int nr_clk) > +{ > + struct clk *clk; > + unsigned int idx, ret; > + > + for (idx = 0; idx < nr_clk; idx++, list++) { > + clk = clk_register_divider(NULL, list->name, list- >parent_name, > + list->flags, reg_base + list->offset, list->shift, > + list->width, list->div_flags, &lock); > + if (IS_ERR(clk)) { > + pr_err("clock: failed to register clock %s\n", > + list->name); > + continue; > + } > + > + samsung_clk_add_lookup(clk, list->id); > + > + /* register a clock lookup only if a clock alias is specified */ > + if (list->alias) { > + ret = clk_register_clkdev(clk, list->alias, > + list->dev_name); > + if (ret) > + pr_err("%s: failed to register lookup %s\n", > + __func__, list->alias); > + } > + } > +} > + > +/* register a list of gate clocks */ > +void __init samsung_clk_register_gate(struct samsung_gate_clock *list, > + unsigned int nr_clk) > +{ > + struct clk *clk; > + unsigned int idx, ret; > + > + for (idx = 0; idx < nr_clk; idx++, list++) { > + clk = clk_register_gate(NULL, list->name, list->parent_name, > + list->flags, reg_base + list->offset, > + list->bit_idx, list->gate_flags, &lock); > + if (IS_ERR(clk)) { > + pr_err("clock: failed to register clock %s\n", > + list->name); > + continue; > + } > + > + /* register a clock lookup only if a clock alias is specified */ > + if (list->alias) { > + ret = clk_register_clkdev(clk, list->alias, > + list->dev_name); > + if (ret) > + pr_err("%s: failed to register lookup %s\n", > + __func__, list->alias); > + } > + > + samsung_clk_add_lookup(clk, list->id); > + } > +} > + > +/* utility function to get the rate of a specified clock */ > +unsigned long _get_rate(const char *clk_name) > +{ > + struct clk *clk; > + unsigned long rate; > + > + clk = clk_get(NULL, clk_name); > + if (IS_ERR(clk)) > + return 0; > + rate = clk_get_rate(clk); > + clk_put(clk); > + return rate; > +} > diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h > new file mode 100644 > index 0000000..ab43498 > --- /dev/null > +++ b/drivers/clk/samsung/clk.h > @@ -0,0 +1,218 @@ > +/* > + * Copyright (c) 2012 Samsung Electronics Co., Ltd. > + * Copyright (c) 2012 Linaro Ltd. > + * Author: Thomas Abraham > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as + > * published by the Free Software Foundation. > + * > + * Common Clock Framework support for all Samsung platforms > +*/ > + > +#ifndef __SAMSUNG_CLK_H > +#define __SAMSUNG_CLK_H > + > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > + > +/** > + * struct samsung_fixed_rate_clock: information about fixed-rate clock > + * @id: platform specific id of the clock. > + * @name: name of this fixed-rate clock. > + * @parent_name: optional parent clock name. > + * @flags: optional fixed-rate clock flags. > + * @fixed-rate: fixed clock rate of this clock. > + */ > +struct samsung_fixed_rate_clock { > + unsigned int id; > + char *name; Shouldn't it be const char *name? > + const char *parent_name; > + unsigned long flags; > + unsigned long fixed_rate; > +}; > + > +#define FRATE(_id, cname, pname, f, frate) \ > + { \ > + .id = _id, \ > + .name = cname, \ > + .parent_name = pname, \ > + .flags = f, \ > + .fixed_rate = frate, \ > + } > + > +/** > + * struct samsung_mux_clock: information about mux clock > + * @id: platform specific id of the clock. > + * @dev_name: name of the device to which this clock belongs. > + * @name: name of this mux clock. > + * @parent_names: array of pointer to parent clock names. > + * @num_parents: number of parents listed in @parent_names. > + * @flags: optional flags for basic clock. > + * @offset: offset of the register for configuring the mux. > + * @shift: starting bit location of the mux control bit-field in @reg. > + * @width: width of the mux control bit-field in @reg. > + * @mux_flags: flags for mux-type clock. > + * @alias: optional clock alias name to be assigned to this clock. > + */ > +struct samsung_mux_clock { > + const unsigned int id; Is const unsigned int really correct? > + const char *dev_name; > + const char *name; > + const char **parent_names; > + u8 num_parents; > + unsigned long flags; > + unsigned long offset; > + u8 shift; > + u8 width; > + u8 mux_flags; > + const char *alias; > +}; > + > +#define __MUX(_id, dname, cname, pnames, o, s, w, f, mf, a) \ > + { \ > + .id = _id, \ > + .dev_name = dname, \ > + .name = cname, \ > + .parent_names = pnames, \ > + .num_parents = ARRAY_SIZE(pnames), \ > + .flags = f, \ > + .offset = o, \ > + .shift = s, \ > + .width = w, \ > + .mux_flags = mf, \ > + .alias = a, \ > + } > + > +#define MUX(_id, cname, pnames, o, s, w) \ > + __MUX(_id, NULL, cname, pnames, o, s, w, 0, 0, NULL) > + > +#define MUX_A(_id, cname, pnames, o, s, w, a) \ > + __MUX(_id, NULL, cname, pnames, o, s, w, 0, 0, a) > + > +#define MUX_F(_id, cname, pnames, o, s, w, f, mf) \ > + __MUX(_id, NULL, cname, pnames, o, s, w, f, mf, NULL) > + > +/** > + * @id: platform specific id of the clock. > + * struct samsung_div_clock: information about div clock > + * @dev_name: name of the device to which this clock belongs. > + * @name: name of this div clock. > + * @parent_name: name of the parent clock. > + * @flags: optional flags for basic clock. > + * @offset: offset of the register for configuring the div. > + * @shift: starting bit location of the div control bit-field in @reg. > + * @div_flags: flags for div-type clock. > + * @alias: optional clock alias name to be assigned to this clock. > + */ > +struct samsung_div_clock { > + const unsigned int id; ditto > + const char *dev_name; > + const char *name; > + const char *parent_name; > + unsigned long flags; > + unsigned long offset; > + u8 shift; > + u8 width; > + u8 div_flags; > + const char *alias; > +}; > + > +#define __DIV(_id, dname, cname, pname, o, s, w, f, df, a) \ > + { \ > + .id = _id, \ > + .dev_name = dname, \ > + .name = cname, \ > + .parent_name = pname, \ > + .flags = f, \ > + .offset = o, \ > + .shift = s, \ > + .width = w, \ > + .div_flags = df, \ > + .alias = a, \ > + } > + > +#define DIV(_id, cname, pname, o, s, w) \ > + __DIV(_id, NULL, cname, pname, o, s, w, 0, 0, NULL) > + > +#define DIV_A(_id, cname, pname, o, s, w, a) \ > + __DIV(_id, NULL, cname, pname, o, s, w, 0, 0, a) > + > +#define DIV_F(_id, cname, pname, o, s, w, f, df) \ > + __DIV(_id, NULL, cname, pname, o, s, w, f, df, NULL) > + > +/** > + * struct samsung_gate_clock: information about gate clock > + * @id: platform specific id of the clock. > + * @dev_name: name of the device to which this clock belongs. > + * @name: name of this gate clock. > + * @parent_name: name of the parent clock. > + * @flags: optional flags for basic clock. > + * @offset: offset of the register for configuring the gate. > + * @bit_idx: bit index of the gate control bit-field in @reg. > + * @gate_flags: flags for gate-type clock. > + * @alias: optional clock alias name to be assigned to this clock. > + */ > +struct samsung_gate_clock { > + const unsigned int id; ditto > + const char *dev_name; > + const char *name; > + const char *parent_name; > + unsigned long flags; > + unsigned long offset; > + u8 bit_idx; > + u8 gate_flags; > + const char *alias; > +}; > + > +#define __GATE(_id, dname, cname, pname, o, b, f, gf, a) \ > + { \ > + .id = _id, \ > + .dev_name = dname, \ > + .name = cname, \ > + .parent_name = pname, \ > + .flags = f, \ > + .offset = o, \ > + .bit_idx = b, \ > + .gate_flags = gf, \ > + .alias = a, \ > + } > + > +#define GATE(_id, cname, pname, o, b, f, gf) \ > + __GATE(_id, NULL, cname, pname, o, b, f, gf, NULL) > + > +#define GATE_A(_id, cname, pname, o, b, f, gf, a) \ > + __GATE(_id, NULL, cname, pname, o, b, f, gf, a) > + > +#define GATE_D(_id, dname, cname, pname, o, b, f, gf) \ > + __GATE(_id, dname, cname, pname, o, b, f, gf, NULL) > + > +#define GATE_DA(_id, dname, cname, pname, o, b, f, gf, a) \ > + __GATE(_id, dname, cname, pname, o, b, f, gf, a) > + > +#define PNAME(x) static const char *x[] __initdata > + > +extern void __iomem *reg_base; Where is it used? The name suggests that it should rather be static. -- Best regards, Tomasz Figa From mboxrd@z Thu Jan 1 00:00:00 1970 From: tomasz.figa@gmail.com (Tomasz Figa) Date: Thu, 15 Nov 2012 00:12:21 +0100 Subject: [PATCH v3 01/11] clk: samsung: add common clock framework helper functions for Samsung platforms In-Reply-To: <1352930853-12268-2-git-send-email-thomas.abraham@linaro.org> References: <1352930853-12268-1-git-send-email-thomas.abraham@linaro.org> <1352930853-12268-2-git-send-email-thomas.abraham@linaro.org> Message-ID: <3129811.yIGKilgVGz@flatron> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Thomas, Looks mostly good, but I have some minor comments inline. On Thursday 15 of November 2012 03:37:23 Thomas Abraham wrote: > All Samsung platforms include different types of clock including > fixed-rate, mux, divider and gate clock types. There are typically > hundreds of such clocks on each of the Samsung platforms. To enable > Samsung platforms to register these clocks using the common clock > framework, a bunch of utility functions are introduced here which > simplify the clock registration process. The clocks are usually > statically instantiated and registered with common clock framework. > > Cc: Mike Turquette > Cc: Kukjin Kim > Signed-off-by: Thomas Abraham > --- > drivers/clk/Makefile | 1 + > drivers/clk/samsung/Makefile | 5 + > drivers/clk/samsung/clk.c | 176 ++++++++++++++++++++++++++++++++++ > drivers/clk/samsung/clk.h | 218 > ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 400 > insertions(+), 0 deletions(-) > create mode 100644 drivers/clk/samsung/Makefile > create mode 100644 drivers/clk/samsung/clk.c > create mode 100644 drivers/clk/samsung/clk.h > > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile > index 2701235..808f8e1 100644 > --- a/drivers/clk/Makefile > +++ b/drivers/clk/Makefile > @@ -19,6 +19,7 @@ endif > obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o > obj-$(CONFIG_ARCH_U8500) += ux500/ > obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o > +obj-$(CONFIG_PLAT_SAMSUNG) += samsung/ > > # Chip specific > obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o > diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile > new file mode 100644 > index 0000000..3f926b0 > --- /dev/null > +++ b/drivers/clk/samsung/Makefile > @@ -0,0 +1,5 @@ > +# > +# Samsung Clock specific Makefile > +# > + > +obj-$(CONFIG_PLAT_SAMSUNG) += clk.o > diff --git a/drivers/clk/samsung/clk.c b/drivers/clk/samsung/clk.c > new file mode 100644 > index 0000000..ebc6fb6 > --- /dev/null > +++ b/drivers/clk/samsung/clk.c > @@ -0,0 +1,176 @@ > +/* > + * Copyright (c) 2012 Samsung Electronics Co., Ltd. > + * Copyright (c) 2012 Linaro Ltd. > + * Author: Thomas Abraham > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as + > * published by the Free Software Foundation. > + * > + * This file includes utility functions to register clocks to common > + * clock framework for Samsung platforms. > +*/ > + > +#include "clk.h" > + > +static DEFINE_SPINLOCK(lock); > +static struct clk **clk_table; > +static struct clk_onecell_data clk_data; > +void __iomem *reg_base; Shouldn't it be static? > + > +/* setup the essentials required to support clock lookup using ccf */ > +void __init samsung_clk_init(struct device_node *np, void __iomem > *base, + unsigned long nr_clks) > +{ > + reg_base = base; > + if (!np) > + return; > + > + clk_table = kzalloc(sizeof(struct clk *) * nr_clks, GFP_KERNEL); > + if (!clk_table) > + panic("could not allocate clock lookup table\n"); > + > + clk_data.clks = clk_table; > + clk_data.clk_num = nr_clks; > + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); > +} > + > +/* add a clock instance to the clock lookup table used for dt based > lookup */ +void samsung_clk_add_lookup(struct clk *clk, unsigned int > id) +{ > + if (clk_table && id) I'm not sure if we really need this kind of checks, but if we do, then shouldn't we also check id against clk_data.clk_num to prevent out of bound index? > + clk_table[id] = clk; > +} > + > +/* register a list of fixed clocks */ > +void __init samsung_clk_register_fixed_rate( > + struct samsung_fixed_rate_clock *list, unsigned int nr_clk) > +{ > + struct clk *clk; > + unsigned int idx, ret; > + > + for (idx = 0; idx < nr_clk; idx++, list++) { > + clk = clk_register_fixed_rate(NULL, list->name, > + list->parent_name, list->flags, list->fixed_rate); > + if (IS_ERR(clk)) { > + pr_err("%s: failed to register clock %s\n", __func__, > + list->name); > + continue; > + } > + > + samsung_clk_add_lookup(clk, list->id); > + > + /* > + * Unconditionally add a clock lookup for the fixed rate clocks. > + * There are not many of these on any of Samsung platforms. > + */ > + ret = clk_register_clkdev(clk, list->name, NULL); > + if (ret) > + pr_err("%s: failed to register clock lookup for %s", > + __func__, list->name); > + } > +} > + > +/* register a list of mux clocks */ > +void __init samsung_clk_register_mux(struct samsung_mux_clock *list, > + unsigned int nr_clk) > +{ > + struct clk *clk; > + unsigned int idx, ret; > + > + for (idx = 0; idx < nr_clk; idx++, list++) { > + clk = clk_register_mux(NULL, list->name, list->parent_names, > + list->num_parents, list->flags, reg_base + list->offset, > + list->shift, list->width, list->mux_flags, &lock); > + if (IS_ERR(clk)) { > + pr_err("%s: failed to register clock %s\n", __func__, > + list->name); > + continue; > + } > + > + samsung_clk_add_lookup(clk, list->id); > + > + /* register a clock lookup only if a clock alias is specified */ > + if (list->alias) { > + ret = clk_register_clkdev(clk, list->alias, > + list->dev_name); > + if (ret) > + pr_err("%s: failed to register lookup %s\n", > + __func__, list->alias); > + } > + } > +} > + > +/* register a list of div clocks */ > +void __init samsung_clk_register_div(struct samsung_div_clock *list, > + unsigned int nr_clk) > +{ > + struct clk *clk; > + unsigned int idx, ret; > + > + for (idx = 0; idx < nr_clk; idx++, list++) { > + clk = clk_register_divider(NULL, list->name, list- >parent_name, > + list->flags, reg_base + list->offset, list->shift, > + list->width, list->div_flags, &lock); > + if (IS_ERR(clk)) { > + pr_err("clock: failed to register clock %s\n", > + list->name); > + continue; > + } > + > + samsung_clk_add_lookup(clk, list->id); > + > + /* register a clock lookup only if a clock alias is specified */ > + if (list->alias) { > + ret = clk_register_clkdev(clk, list->alias, > + list->dev_name); > + if (ret) > + pr_err("%s: failed to register lookup %s\n", > + __func__, list->alias); > + } > + } > +} > + > +/* register a list of gate clocks */ > +void __init samsung_clk_register_gate(struct samsung_gate_clock *list, > + unsigned int nr_clk) > +{ > + struct clk *clk; > + unsigned int idx, ret; > + > + for (idx = 0; idx < nr_clk; idx++, list++) { > + clk = clk_register_gate(NULL, list->name, list->parent_name, > + list->flags, reg_base + list->offset, > + list->bit_idx, list->gate_flags, &lock); > + if (IS_ERR(clk)) { > + pr_err("clock: failed to register clock %s\n", > + list->name); > + continue; > + } > + > + /* register a clock lookup only if a clock alias is specified */ > + if (list->alias) { > + ret = clk_register_clkdev(clk, list->alias, > + list->dev_name); > + if (ret) > + pr_err("%s: failed to register lookup %s\n", > + __func__, list->alias); > + } > + > + samsung_clk_add_lookup(clk, list->id); > + } > +} > + > +/* utility function to get the rate of a specified clock */ > +unsigned long _get_rate(const char *clk_name) > +{ > + struct clk *clk; > + unsigned long rate; > + > + clk = clk_get(NULL, clk_name); > + if (IS_ERR(clk)) > + return 0; > + rate = clk_get_rate(clk); > + clk_put(clk); > + return rate; > +} > diff --git a/drivers/clk/samsung/clk.h b/drivers/clk/samsung/clk.h > new file mode 100644 > index 0000000..ab43498 > --- /dev/null > +++ b/drivers/clk/samsung/clk.h > @@ -0,0 +1,218 @@ > +/* > + * Copyright (c) 2012 Samsung Electronics Co., Ltd. > + * Copyright (c) 2012 Linaro Ltd. > + * Author: Thomas Abraham > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as + > * published by the Free Software Foundation. > + * > + * Common Clock Framework support for all Samsung platforms > +*/ > + > +#ifndef __SAMSUNG_CLK_H > +#define __SAMSUNG_CLK_H > + > +#include > +#include > +#include > +#include > +#include > +#include > + > +#include > + > +/** > + * struct samsung_fixed_rate_clock: information about fixed-rate clock > + * @id: platform specific id of the clock. > + * @name: name of this fixed-rate clock. > + * @parent_name: optional parent clock name. > + * @flags: optional fixed-rate clock flags. > + * @fixed-rate: fixed clock rate of this clock. > + */ > +struct samsung_fixed_rate_clock { > + unsigned int id; > + char *name; Shouldn't it be const char *name? > + const char *parent_name; > + unsigned long flags; > + unsigned long fixed_rate; > +}; > + > +#define FRATE(_id, cname, pname, f, frate) \ > + { \ > + .id = _id, \ > + .name = cname, \ > + .parent_name = pname, \ > + .flags = f, \ > + .fixed_rate = frate, \ > + } > + > +/** > + * struct samsung_mux_clock: information about mux clock > + * @id: platform specific id of the clock. > + * @dev_name: name of the device to which this clock belongs. > + * @name: name of this mux clock. > + * @parent_names: array of pointer to parent clock names. > + * @num_parents: number of parents listed in @parent_names. > + * @flags: optional flags for basic clock. > + * @offset: offset of the register for configuring the mux. > + * @shift: starting bit location of the mux control bit-field in @reg. > + * @width: width of the mux control bit-field in @reg. > + * @mux_flags: flags for mux-type clock. > + * @alias: optional clock alias name to be assigned to this clock. > + */ > +struct samsung_mux_clock { > + const unsigned int id; Is const unsigned int really correct? > + const char *dev_name; > + const char *name; > + const char **parent_names; > + u8 num_parents; > + unsigned long flags; > + unsigned long offset; > + u8 shift; > + u8 width; > + u8 mux_flags; > + const char *alias; > +}; > + > +#define __MUX(_id, dname, cname, pnames, o, s, w, f, mf, a) \ > + { \ > + .id = _id, \ > + .dev_name = dname, \ > + .name = cname, \ > + .parent_names = pnames, \ > + .num_parents = ARRAY_SIZE(pnames), \ > + .flags = f, \ > + .offset = o, \ > + .shift = s, \ > + .width = w, \ > + .mux_flags = mf, \ > + .alias = a, \ > + } > + > +#define MUX(_id, cname, pnames, o, s, w) \ > + __MUX(_id, NULL, cname, pnames, o, s, w, 0, 0, NULL) > + > +#define MUX_A(_id, cname, pnames, o, s, w, a) \ > + __MUX(_id, NULL, cname, pnames, o, s, w, 0, 0, a) > + > +#define MUX_F(_id, cname, pnames, o, s, w, f, mf) \ > + __MUX(_id, NULL, cname, pnames, o, s, w, f, mf, NULL) > + > +/** > + * @id: platform specific id of the clock. > + * struct samsung_div_clock: information about div clock > + * @dev_name: name of the device to which this clock belongs. > + * @name: name of this div clock. > + * @parent_name: name of the parent clock. > + * @flags: optional flags for basic clock. > + * @offset: offset of the register for configuring the div. > + * @shift: starting bit location of the div control bit-field in @reg. > + * @div_flags: flags for div-type clock. > + * @alias: optional clock alias name to be assigned to this clock. > + */ > +struct samsung_div_clock { > + const unsigned int id; ditto > + const char *dev_name; > + const char *name; > + const char *parent_name; > + unsigned long flags; > + unsigned long offset; > + u8 shift; > + u8 width; > + u8 div_flags; > + const char *alias; > +}; > + > +#define __DIV(_id, dname, cname, pname, o, s, w, f, df, a) \ > + { \ > + .id = _id, \ > + .dev_name = dname, \ > + .name = cname, \ > + .parent_name = pname, \ > + .flags = f, \ > + .offset = o, \ > + .shift = s, \ > + .width = w, \ > + .div_flags = df, \ > + .alias = a, \ > + } > + > +#define DIV(_id, cname, pname, o, s, w) \ > + __DIV(_id, NULL, cname, pname, o, s, w, 0, 0, NULL) > + > +#define DIV_A(_id, cname, pname, o, s, w, a) \ > + __DIV(_id, NULL, cname, pname, o, s, w, 0, 0, a) > + > +#define DIV_F(_id, cname, pname, o, s, w, f, df) \ > + __DIV(_id, NULL, cname, pname, o, s, w, f, df, NULL) > + > +/** > + * struct samsung_gate_clock: information about gate clock > + * @id: platform specific id of the clock. > + * @dev_name: name of the device to which this clock belongs. > + * @name: name of this gate clock. > + * @parent_name: name of the parent clock. > + * @flags: optional flags for basic clock. > + * @offset: offset of the register for configuring the gate. > + * @bit_idx: bit index of the gate control bit-field in @reg. > + * @gate_flags: flags for gate-type clock. > + * @alias: optional clock alias name to be assigned to this clock. > + */ > +struct samsung_gate_clock { > + const unsigned int id; ditto > + const char *dev_name; > + const char *name; > + const char *parent_name; > + unsigned long flags; > + unsigned long offset; > + u8 bit_idx; > + u8 gate_flags; > + const char *alias; > +}; > + > +#define __GATE(_id, dname, cname, pname, o, b, f, gf, a) \ > + { \ > + .id = _id, \ > + .dev_name = dname, \ > + .name = cname, \ > + .parent_name = pname, \ > + .flags = f, \ > + .offset = o, \ > + .bit_idx = b, \ > + .gate_flags = gf, \ > + .alias = a, \ > + } > + > +#define GATE(_id, cname, pname, o, b, f, gf) \ > + __GATE(_id, NULL, cname, pname, o, b, f, gf, NULL) > + > +#define GATE_A(_id, cname, pname, o, b, f, gf, a) \ > + __GATE(_id, NULL, cname, pname, o, b, f, gf, a) > + > +#define GATE_D(_id, dname, cname, pname, o, b, f, gf) \ > + __GATE(_id, dname, cname, pname, o, b, f, gf, NULL) > + > +#define GATE_DA(_id, dname, cname, pname, o, b, f, gf, a) \ > + __GATE(_id, dname, cname, pname, o, b, f, gf, a) > + > +#define PNAME(x) static const char *x[] __initdata > + > +extern void __iomem *reg_base; Where is it used? The name suggests that it should rather be static. -- Best regards, Tomasz Figa