From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Wed, 22 May 2019 17:49:22 +0200 Subject: [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2 In-Reply-To: <20190522151504.GU22232@bill-the-cat> References: <20190522023410.GS22232@bill-the-cat> <20190522151504.GU22232@bill-the-cat> Message-ID: <31302537-45b4-315d-fe3f-d04cff2fa3a2@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 5/22/19 5:15 PM, Tom Rini wrote: > On Wed, May 22, 2019 at 11:23:11AM -0300, Fabio Estevam wrote: >> On Tue, May 21, 2019 at 11:34 PM Tom Rini wrote: >> >>> As came up in another thread, CONFIG_MMC_TINY may be more widely useable >>> and should help with space. >> >> How it can be used exactly? >> >> I tried it like this: >> >> --- a/configs/mx6sabresd_defconfig >> +++ b/configs/mx6sabresd_defconfig >> @@ -6,7 +6,6 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y >> CONFIG_SPL_LIBGENERIC_SUPPORT=y >> CONFIG_SYS_MALLOC_F_LEN=0x4000 >> CONFIG_TARGET_MX6SABRESD=y >> -CONFIG_SPL_MMC_SUPPORT=y >> CONFIG_SPL_SERIAL_SUPPORT=y >> CONFIG_NR_DRAM_BANKS=1 >> CONFIG_SPL=y >> @@ -100,3 +99,4 @@ CONFIG_USB_HOST_ETHER=y >> CONFIG_USB_ETHER_ASIX=y >> CONFIG_DM_VIDEO=y >> CONFIG_VIDEO_IPUV3=y >> +CONFIG_SPL_MMC_TINY=y >> >> , but the board does not boot: >> >> U-Boot SPL 2019.07-rc2-00164-ge1a2ed7180-dirty (May 22 2019 - 11:19:41 -0300) >> SPL: Unsupported Boot Device! >> SPL: failed to boot from all boot devices >> ### ERROR ### Please RESET the board ### > > Yes, I was hoping to get Marek or Ezequiel to speak up a bit more on how > to configure / use it, in the other thread. Look at what the CI20 does ? That board boots from SD and uses the TINY stuff. -- Best regards, Marek Vasut