diff for duplicates of <3131254.YlICBQirlu@jernej-laptop>

diff --git a/a/1.txt b/N1/1.txt
index 785733a..acb18b2 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -1,5 +1,5 @@
 Dne četrtek, 28. junij 2018 ob 04:22:36 CEST je Chen-Yu Tsai napisal(a):
-> On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec@siol.net> 
+> On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org> 
 wrote:
 > > Current DW HDMI PHY code never prepares and enables PHY clock after it is
 > > created. It's just used as it is. This may work in some cases, but it's
@@ -8,18 +8,25 @@ wrote:
 > > 
 > > Fixes: 4f86e81748fe ("drm/sun4i: Add support for H3 HDMI PHY variant")
 > > 
-> > Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
+> > Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
 > 
 > So why does it work on the H3? Because there's only one PLL that the whole
 > display pipeline uses?
 > 
 > We should probably tag this for stable. So,
 > 
-> Cc: <stable@vger.kernel.org>
-> Reviewed-by: Chen-Yu Tsai <wens@csie.org>
+> Cc: <stable-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
+> Reviewed-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
 
 Same question as before, how this should be handled? Can I send separate patch 
 with same content to stable ML only?
 
 Best regards,
-Jernej
\ No newline at end of file
+Jernej
+
+
+
+-- 
+You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
+To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
+For more options, visit https://groups.google.com/d/optout.
\ No newline at end of file
diff --git a/a/content_digest b/N1/content_digest
index dc7a378..b9eeb1f 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -8,7 +8,10 @@
   "ref\0CAGb2v65En4RbVdRu7c6MJUztVhC36dWr0kaO9bqc9PtuXAcsww\@mail.gmail.com\0"
 ]
 [
-  "From\0Jernej \305\240krabec <jernej.skrabec\@siol.net>\0"
+  "ref\0CAGb2v65En4RbVdRu7c6MJUztVhC36dWr0kaO9bqc9PtuXAcsww-JsoAwUIsXosN+BqQ9rBEUg\@public.gmane.org\0"
+]
+[
+  "From\0Jernej \305\240krabec <jernej.skrabec-gGgVlfcn5nU\@public.gmane.org>\0"
 ]
 [
   "Subject\0Re: [PATCH v3 16/24] drm/sun4i: Enable DW HDMI PHY clock\0"
@@ -17,22 +20,22 @@
   "Date\0Fri, 29 Jun 2018 21:19:33 +0200\0"
 ]
 [
-  "To\0Chen-Yu Tsai <wens\@csie.org>\0"
+  "To\0Chen-Yu Tsai <wens-jdAy2FN1RRM\@public.gmane.org>\0"
 ]
 [
-  "Cc\0Maxime Ripard <maxime.ripard\@bootlin.com>",
-  " Rob Herring <robh+dt\@kernel.org>",
-  " David Airlie <airlied\@linux.ie>",
-  " Gustavo Padovan <gustavo\@padovan.org>",
-  " Maarten Lankhorst <maarten.lankhorst\@linux.intel.com>",
-  " Sean Paul <seanpaul\@chromium.org>",
-  " Mark Rutland <mark.rutland\@arm.com>",
-  " dri-devel <dri-devel\@lists.freedesktop.org>",
-  " devicetree <devicetree\@vger.kernel.org>",
-  " linux-arm-kernel <linux-arm-kernel\@lists.infradead.org>",
-  " linux-kernel <linux-kernel\@vger.kernel.org>",
-  " linux-clk <linux-clk\@vger.kernel.org>",
-  " linux-sunxi <linux-sunxi\@googlegroups.com>\0"
+  "Cc\0Maxime Ripard <maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ\@public.gmane.org>",
+  " Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A\@public.gmane.org>",
+  " David Airlie <airlied-cv59FeDIM0c\@public.gmane.org>",
+  " Gustavo Padovan <gustavo-THi1TnShQwVAfugRpC6u6w\@public.gmane.org>",
+  " Maarten Lankhorst <maarten.lankhorst-VuQAYsv1563Yd54FQh9/CA\@public.gmane.org>",
+  " Sean Paul <seanpaul-F7+t8E8rja9g9hUCZPvPmw\@public.gmane.org>",
+  " Mark Rutland <mark.rutland-5wv7dgnIgG8\@public.gmane.org>",
+  " dri-devel <dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW\@public.gmane.org>",
+  " devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA\@public.gmane.org>",
+  " linux-arm-kernel <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r\@public.gmane.org>",
+  " linux-kernel <linux-kernel-u79uwXL29TY76Z2rM5mHXA\@public.gmane.org>",
+  " linux-clk <linux-clk-u79uwXL29TY76Z2rM5mHXA\@public.gmane.org>",
+  " linux-sunxi <linux-sunxi-/JYPxA39Uh5TLH3MbocFFw\@public.gmane.org>\0"
 ]
 [
   "\0000:1\0"
@@ -42,7 +45,7 @@
 ]
 [
   "Dne \304\215etrtek, 28. junij 2018 ob 04:22:36 CEST je Chen-Yu Tsai napisal(a):\n",
-  "> On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec\@siol.net> \n",
+  "> On Mon, Jun 25, 2018 at 8:02 PM, Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU\@public.gmane.org> \n",
   "wrote:\n",
   "> > Current DW HDMI PHY code never prepares and enables PHY clock after it is\n",
   "> > created. It's just used as it is. This may work in some cases, but it's\n",
@@ -51,21 +54,28 @@
   "> > \n",
   "> > Fixes: 4f86e81748fe (\"drm/sun4i: Add support for H3 HDMI PHY variant\")\n",
   "> > \n",
-  "> > Signed-off-by: Jernej Skrabec <jernej.skrabec\@siol.net>\n",
+  "> > Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU\@public.gmane.org>\n",
   "> \n",
   "> So why does it work on the H3? Because there's only one PLL that the whole\n",
   "> display pipeline uses?\n",
   "> \n",
   "> We should probably tag this for stable. So,\n",
   "> \n",
-  "> Cc: <stable\@vger.kernel.org>\n",
-  "> Reviewed-by: Chen-Yu Tsai <wens\@csie.org>\n",
+  "> Cc: <stable-u79uwXL29TY76Z2rM5mHXA\@public.gmane.org>\n",
+  "> Reviewed-by: Chen-Yu Tsai <wens-jdAy2FN1RRM\@public.gmane.org>\n",
   "\n",
   "Same question as before, how this should be handled? Can I send separate patch \n",
   "with same content to stable ML only?\n",
   "\n",
   "Best regards,\n",
-  "Jernej"
+  "Jernej\n",
+  "\n",
+  "\n",
+  "\n",
+  "-- \n",
+  "You received this message because you are subscribed to the Google Groups \"linux-sunxi\" group.\n",
+  "To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0\@public.gmane.org\n",
+  "For more options, visit https://groups.google.com/d/optout."
 ]
 
-27f34cd7bfc96151bb3a9da0e9396779eaadbede561e57480a2eed7be8fc10e6
+c69b2d8879aa720c5861ca1533918cb5875ef61be2213760a82178efbfe543d9
