[PATCH v2 0/8] drm/rockchip: migrate to common dw-mipi-dsi bridge and dual-dsi

* [PATCH v2 0/8] drm/rockchip: migrate to common dw-mipi-dsi bridge and dual-dsi
@ 2018-06-18 10:27 Heiko Stuebner
  2018-06-18 10:27 ` [PATCH v2 1/8] drm/bridge/synopsys: dsi: move mipi_dsi_host_unregister to __dw_mipi_dsi_remove Heiko Stuebner
                   ` (8 more replies)
  0 siblings, 9 replies; 26+ messages in thread
From: Heiko Stuebner @ 2018-06-18 10:27 UTC (permalink / raw)
  To: dri-devel
  Cc: mark.rutland, devicetree, briannorris, hoegsberg, philippe.cornu,
	yannick.fertre, linux-rockchip, nickey.yang, robh+dt,
	thierry.reding, laurent.pinchart, mka

The Rockchip DSI driver was separate till now, not using the common
bridge driver that was introduced a bit later. So this series migrates
over to use that common bridge driver and then also adds support for
dual-dsi to both the bridge and Rockchip glue code.

The bridge-migration itself is based on Nickeys earlier v8
work, but adapted to current kernels and with a new split between probe
and bind, so that we do not create and drop the dsi-host on each deferred
bind attempt.

changes in v2:
- rebase against newer drm code (dsi-bridge+rockchip changes)
- add SPDX header to new glue driver
- expect regular interface lanes from panel (like 4) not the double number
  Similar to tegra
- keep links to both master and slave

The dual-dsi setup follows the port description introduced by Archit [0],
in that the panel defines two input ports that get connected to both
dsi-controllers instances. So on Gru-Scarlett this looks for example
like:

&mipi_dsi {
	status = "okay";
	clock-master;

	ports {
		mipi_out: port@1 {
			reg = <1>;

			mipi_out_panel: endpoint {
				remote-endpoint = <&mipi_in_panel>;
			};
		};
	};

	mipi_panel: panel@0 {
		/* 2 different panels are used, compatibles are in dts files */
		reg = <0>;
		backlight = <&backlight>;
		enable-gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&display_rst_l>;

		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port@0 {
				reg = <0>;

				mipi_in_panel: endpoint {
					remote-endpoint = <&mipi_out_panel>;
				};
			};

			port@1 {
				reg = <1>;

				mipi1_in_panel: endpoint@1 {
					remote-endpoint = <&mipi1_out_panel>;
				};
			};
		};
	};
};

&mipi_dsi1 {
	status = "okay";

	ports {
		mipi1_out: port@1 {
			reg = <1>;

			mipi1_out_panel: endpoint {
				remote-endpoint = <&mipi1_in_panel>;
			};
		};
	};
};

The driver internal setup is pretty similar to what tegra does with
its ganged-mode [1][2]. But here a new helper function allows to traverse
the devicetree from one controller port through the panel to find
another dsi-controller using that same panel. This way we don't need
a special phandle-property to link the controllers together.

For the CRTC it is still one single display to handle, only with
an additional switch that enables the dual-dsi output.

For practical purposes it is possible to just pick half the series
(till patch 5) to get the migration to the bridge driver first,
so that we can get rid of the dw-dsi copy in the Rockchip driver.

But of course Acks / Reviews of the dsi-bridge changes would be needed.

[0] https://patchwork.kernel.org/patch/10172381/
[1] https://lkml.org/lkml/2014/8/5/396
[2] https://patchwork.kernel.org/patch/5075161/

Heiko Stuebner (5):
  drm/bridge/synopsys: dsi: move mipi_dsi_host_unregister to
    __dw_mipi_dsi_remove
  drm/bridge/synopsys: dsi: don't call __dw_mipi_dsi_probe from
    dw_mipi_dsi_bind
  drm/bridge/synopsys: dsi: defer probing if panel not available in
    bridge-attach
  drm/dsi: add helper function to find the second host in a dual-dsi
    setup
  drm/rockchip: dsi: add dual mipi support

Nickey Yang (3):
  dt-bindings: display: rockchip: update DSI controller
  drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver
  drm/bridge/synopsys: dsi: add dual-dsi support

 .../display/rockchip/dw_mipi_dsi_rockchip.txt |   23 +-
 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c |  115 +-
 drivers/gpu/drm/drm_mipi_dsi.c                |   56 +
 drivers/gpu/drm/rockchip/Kconfig              |    2 +-
 drivers/gpu/drm/rockchip/Makefile             |    2 +-
 .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c   |  992 ++++++++++++
 drivers/gpu/drm/rockchip/dw-mipi-dsi.c        | 1349 -----------------
 drivers/gpu/drm/rockchip/rockchip_drm_drv.c   |    2 +-
 drivers/gpu/drm/rockchip/rockchip_drm_drv.h   |    3 +-
 drivers/gpu/drm/rockchip/rockchip_drm_vop.c   |    3 +
 drivers/gpu/drm/rockchip/rockchip_drm_vop.h   |    4 +
 drivers/gpu/drm/rockchip/rockchip_vop_reg.c   |    1 +
 include/drm/bridge/dw_mipi_dsi.h              |    6 +-
 include/drm/drm_mipi_dsi.h                    |    2 +
 14 files changed, 1179 insertions(+), 1381 deletions(-)
 create mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c
 delete mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi.c

-- 
2.17.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 26+ messages in thread