From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933334AbaFII6Y (ORCPT ); Mon, 9 Jun 2014 04:58:24 -0400 Received: from ip4-83-240-18-248.cust.nbox.cz ([83.240.18.248]:58542 "EHLO ip4-83-240-18-248.cust.nbox.cz" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932206AbaFIIv1 (ORCPT ); Mon, 9 Jun 2014 04:51:27 -0400 From: Jiri Slaby To: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org, Anssi Hannula , Takashi Iwai , Jiri Slaby Subject: [PATCH 3.12 095/146] ALSA: hda - hdmi: Set converter channel count even without sink Date: Mon, 9 Jun 2014 10:50:30 +0200 Message-Id: <33d531477c11345db670fe7f2d9c5910773a1789.1402303821.git.jslaby@suse.cz> X-Mailer: git-send-email 1.9.3 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Anssi Hannula 3.12-stable review patch. If anyone has any objections, please let me know. =============== commit f06ab794af7055d0949b09885f79f8b493deec64 upstream. Since commit 1df5a06a ("ALSA: hda - hdmi: Fix programmed active channel count") channel count is no longer being set if monitor_present is 0. This is because setting the count was moved after the CA value is determined, which is only after the monitor_present check in hdmi_setup_audio_infoframe(). Unfortunately, in some cases, such as with a non-spec-compliant codec or with a problematic video driver, monitor_present is always 0. As a specific example, this seems to happen with gen1 ATV (SiI1390 codec), causing left-channel-only stereo playback (multi-channel playback has apparently never worked with this codec despite it reporting 8 channels, reason unknown). Simply setting converter channel count without setting the pin infoframe and channel mapping as well does not theoretically make much sense as this will just mean they are out-of-sync and multichannel playback will have a wrong channel mapping. However, adding back just setting the converter channel count even in no-monitor case is the safest change which at least fixes the stereo playback regression on SiI1390 codec. Do that. Signed-off-by: Anssi Hannula Reported-by: Stephan Raue Tested-by: Stephan Raue Signed-off-by: Takashi Iwai Signed-off-by: Jiri Slaby --- sound/pci/hda/patch_hdmi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 23e0bc6d6568..2949c8d34d33 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1023,8 +1023,10 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, AMP_OUT_UNMUTE); eld = &per_pin->sink_eld; - if (!eld->monitor_present) + if (!eld->monitor_present) { + hdmi_set_channel_count(codec, per_pin->cvt_nid, channels); return; + } if (!non_pcm && per_pin->chmap_set) ca = hdmi_manual_channel_allocation(channels, per_pin->chmap); -- 1.9.3