Hi Lars,

On 5/26/20 5:16 AM, poeschel(a)lemonage.de wrote:
> From: Lars Poeschel <poeschel@lemonage.de>
> 
> The Quectel EC21 does only work correctly, if the mux channel used for
> aux is the first mux channel. It does only put it's URC messages in the
> first mux channel, so this has to be the aux channel in our case.
> ---
>   plugins/quectel.c | 51 +++++++++++++++++++++++++++++++++++------------
>   1 file changed, 38 insertions(+), 13 deletions(-)
> 
> diff --git a/plugins/quectel.c b/plugins/quectel.c
> index 1d312c45..9ff75516 100644
> --- a/plugins/quectel.c
> +++ b/plugins/quectel.c
> @@ -847,18 +847,38 @@ static void cmux_gatmux(struct ofono_modem *modem)
>   
>   	g_at_mux_start(data->mux);
>   
> -	data->modem = create_chat(modem, "Modem: ");
> -	if (!data->modem) {
> -		ofono_error("failed to create modem channel");
> -		close_serial(modem);
> -		return;
> -	}
> +	if (data->model == QUECTEL_EC21) {
> +		data->aux = create_chat(modem, "Aux: ");
>   
> -	data->aux = create_chat(modem, "Aux: ");
> -	if (!data->aux) {
> -		ofono_error("failed to create aux channel");
> -		close_serial(modem);
> -		return;
> +		if (!data->aux) {
> +			ofono_error("failed to create aux channel");
> +			close_serial(modem);
> +			return;
> +		}
> +
> +		data->modem = create_chat(modem, "Modem: ");
> +
> +		if (!data->modem) {
> +			ofono_error("failed to create modem channel");
> +			close_serial(modem);
> +			return;
> +		}
> +	} else {
> +		data->modem = create_chat(modem, "Modem: ");
> +
> +		if (!data->modem) {
> +			ofono_error("failed to create modem channel");
> +			close_serial(modem);
> +			return;
> +		}
> +
> +		data->aux = create_chat(modem, "Aux: ");
> +
> +		if (!data->aux) {
> +			ofono_error("failed to create aux channel");
> +			close_serial(modem);
> +			return;
> +		}
>   	}

Can we be smarter about this and just store the per-model creation 
sequence as an array or something?  Then have a loop that calls 
create_chat from the array info?  The proposed copy-pasting approach is 
not maintainable long term.

>   
>   	setup_aux(modem);
> @@ -951,8 +971,13 @@ static void cmux_ngsm(struct ofono_modem *modem)
>   	 * the kernel does not yet support mapping the underlying serial device
>   	 * to its virtual gsm ttys, so hard-code gsmtty1 gsmtty2 for now
>   	 */
> -	ofono_modem_set_string(modem, "Modem", "/dev/gsmtty1");
> -	ofono_modem_set_string(modem, "Aux", "/dev/gsmtty2");
> +	if (data->model == QUECTEL_EC21) {
> +		ofono_modem_set_string(modem, "Modem", "/dev/gsmtty2");
> +		ofono_modem_set_string(modem, "Aux", "/dev/gsmtty1");
> +	} else {
> +		ofono_modem_set_string(modem, "Modem", "/dev/gsmtty1");
> +		ofono_modem_set_string(modem, "Aux", "/dev/gsmtty2");
> +	}

Doesn't this break the logic in mux_ready_cb, particularly the 'check if 
the last virtual gsm tty's are created'

>   
>   	/* wait for gsmtty devices to appear */
>   	if (!l_timeout_create_ms(100, mux_ready_cb, modem, NULL)) {
> 

Regards,
-Denis