All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Linus Walleij <linus.walleij@linaro.org>,
	Grigoryev Denis <grigoryev@fastwel.ru>,
	"H. Nikolaus Schaller" <hns@goldelico.com>,
	Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>,
	Steve Longerbeam <slongerbeam@gmail.com>
Cc: "linux-gpio@vger.kernel.org" <linux-gpio@vger.kernel.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] gpio: pca953x: Clear irq trigger type on irq shutdown
Date: Wed, 16 May 2018 16:14:00 +0300	[thread overview]
Message-ID: <354db10f9a239e04087ba7cf7d731d3fbe2ec066.camel@linux.intel.com> (raw)
In-Reply-To: <CACRpkdbn_8WUQ8oqn2+M6KpEEogLTMMqbJrp-d2=HEkjJ-XtDQ@mail.gmail.com>

On Wed, 2018-05-16 at 14:51 +0200, Linus Walleij wrote:
> On Fri, May 4, 2018 at 6:53 PM, Grigoryev Denis <grigoryev@fastwel.ru>
> wrote:
> 

If it's full context below, the patch looks good enough to me (assuming
it works and doesn't break things on other chips like PCAL variants).

Though, I didn't read the code carefully (not enough time this week).
Thus, FWIW, 

Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

with above caveats in mind.

> > The driver stores the result of irq_set_type() in the internal
> > variables
> > irq_trig_raise and irq_trig_fall, which later are used to determine
> > the GPIOs that must be re-configured as input. These variables
> > retain their
> > value between gpiolib's  export / unexport, resulting in an
> > incorrect
> > state in some cases. The corresponding bits in the variables
> > irq_trig_raise and irq_trig_fall should be cleared in
> > irq_shutdown().
> > 
> > Signed-off-by: Denis Grigoryev <grigoryev@fastwel.ru>
> > ---
> >  drivers/gpio/gpio-pca953x.c | 10 ++++++++++
> >  1 file changed, 10 insertions(+)
> > 
> > diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-
> > pca953x.c
> > index d2ead4b..b41be8c 100644
> > --- a/drivers/gpio/gpio-pca953x.c
> > +++ b/drivers/gpio/gpio-pca953x.c
> > @@ -522,6 +522,15 @@ static int pca953x_irq_set_type(struct irq_data
> > *d, unsigned int type)
> >         return 0;
> >  }
> > 
> > +static void pca953x_irq_shutdown(struct irq_data *d)
> > +{
> > +       struct pca953x_chip *chip = irq_data_get_irq_chip_data(d);
> > +       u8 mask = 1 << (d->hwirq % BANK_SZ);
> > +
> > +       chip->irq_trig_raise[d->hwirq / BANK_SZ] &= ~mask;
> > +       chip->irq_trig_fall[d->hwirq / BANK_SZ] &= ~mask;
> > +}
> > +
> >  static struct irq_chip pca953x_irq_chip = {
> >         .name                   = "pca953x",
> >         .irq_mask               = pca953x_irq_mask,
> > @@ -529,6 +538,7 @@ static struct irq_chip pca953x_irq_chip = {
> >         .irq_bus_lock           = pca953x_irq_bus_lock,
> >         .irq_bus_sync_unlock    = pca953x_irq_bus_sync_unlock,
> >         .irq_set_type           = pca953x_irq_set_type,
> > +       .irq_shutdown           = pca953x_irq_shutdown,
> >  };
> 
> This driver has a big set of users, so putting some maintainers
> in the loop so we can get some patch review.
> 
> Yours,
> Linus Walleij

-- 
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy

  reply	other threads:[~2018-05-16 13:14 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-04 16:53 [PATCH] gpio: pca953x: Clear irq trigger type on irq shutdown Grigoryev Denis
2018-05-04 16:53 ` Grigoryev Denis
2018-05-16 12:51 ` Linus Walleij
2018-05-16 13:14   ` Andy Shevchenko [this message]
2018-05-23  9:48 ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=354db10f9a239e04087ba7cf7d731d3fbe2ec066.camel@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=grigoryev@fastwel.ru \
    --cc=hns@goldelico.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sergei.shtylyov@cogentembedded.com \
    --cc=slongerbeam@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.