On Saturday 21 November 2015 17:02:34 Jonathan Cameron wrote:
> On 16/11/15 12:01, Markus Pargmann wrote:
> > This is the core driver for imx25 touchscreen/adc driver. The module
> > has one shared ADC and two different conversion queues which use the
> > ADC. The two queues are identical. Both can be used for general purpose
> > ADC but one is meant to be used for touchscreens.
> > 
> > This driver is the core which manages the central components and
> > registers of the TSC/ADC unit. It manages the IRQs and forwards them to
> > the correct components.
> > 
> > Signed-off-by: Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> > Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
> > 
> > [ensure correct ADC clock depending on the IPG clock]
> > Signed-off-by: Juergen Borleis <jbe-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
> Looks good to me - one query on meaning of a comment inline.
> 
> Acked-by: Jonathan Cameron <jic23-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

Thanks, comment inline.

> 
> I'm taking the view this series wants to go through the MFD tree
> but don't mind if it goes through IIO or input instead
> if there is a good reason to do so.
> 
> Jonathan
> > ---
> > 
> > Notes:
> >     Changes in v7:
> >      - Cleanup bit defines in header files to be more readable
> >      - Fix irq check to return with an error for irq <= 0
> >      - Add COMPILE_TEST in Kconfig file
> >     
> >     Changes in v5:
> >      - Remove ifdef CONFIG_OF as this driver is only for DT usage
> >      - Remove module owner
> >      - Add Kconfig dependencies ARCH_MX25 and OF
> >     
> >     @Jonathan Cameron:
> >     I left your acked-by on the patch as these were small changes. If it should be
> >     removed, please say so. Thanks
> > 
> >  drivers/mfd/Kconfig             |   9 ++
> >  drivers/mfd/Makefile            |   2 +
> >  drivers/mfd/fsl-imx25-tsadc.c   | 204 ++++++++++++++++++++++++++++++++++++++++
> >  include/linux/mfd/imx25-tsadc.h | 140 +++++++++++++++++++++++++++
> >  4 files changed, 355 insertions(+)
> >  create mode 100644 drivers/mfd/fsl-imx25-tsadc.c
> >  create mode 100644 include/linux/mfd/imx25-tsadc.h
> > 
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index 4d92df6ef9fe..4222e202ad2b 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -271,6 +271,15 @@ config MFD_MC13XXX_I2C
> >  	help
> >  	  Select this if your MC13xxx is connected via an I2C bus.
> >  
> > +config MFD_MX25_TSADC
> > +	tristate "Freescale i.MX25 integrated Touchscreen and ADC unit"
> > +	select REGMAP_MMIO
> > +	depends on (SOC_IMX25 && OF) || COMPILE_TEST
> > +	help
> > +	  Enable support for the integrated Touchscreen and ADC unit of the
> > +	  i.MX25 processors. They consist of a conversion queue for general
> > +	  purpose ADC and a queue for Touchscreens.
> > +
> >  config MFD_HI6421_PMIC
> >  	tristate "HiSilicon Hi6421 PMU/Codec IC"
> >  	depends on OF
> > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> > index a8b76b81b467..5741be88c173 100644
> > --- a/drivers/mfd/Makefile
> > +++ b/drivers/mfd/Makefile
> > @@ -81,6 +81,8 @@ obj-$(CONFIG_TWL4030_POWER)    += twl4030-power.o
> >  obj-$(CONFIG_MFD_TWL4030_AUDIO)	+= twl4030-audio.o
> >  obj-$(CONFIG_TWL6040_CORE)	+= twl6040.o
> >  
> > +obj-$(CONFIG_MFD_MX25_TSADC)	+= fsl-imx25-tsadc.o
> > +
> >  obj-$(CONFIG_MFD_MC13XXX)	+= mc13xxx-core.o
> >  obj-$(CONFIG_MFD_MC13XXX_SPI)	+= mc13xxx-spi.o
> >  obj-$(CONFIG_MFD_MC13XXX_I2C)	+= mc13xxx-i2c.o
> > diff --git a/drivers/mfd/fsl-imx25-tsadc.c b/drivers/mfd/fsl-imx25-tsadc.c
> > new file mode 100644
> > index 000000000000..e67d5ca81e10
> > --- /dev/null
> > +++ b/drivers/mfd/fsl-imx25-tsadc.c
> > @@ -0,0 +1,204 @@
> > +/*
> > + * Copyright (C) 2014-2015 Pengutronix, Markus Pargmann <mpa@pengutronix.de>
> > + *
> > + * This program is free software; you can redistribute it and/or modify it under
> > + * the terms of the GNU General Public License version 2 as published by the
> > + * Free Software Foundation.
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/irqchip/chained_irq.h>
> > +#include <linux/irqdesc.h>
> > +#include <linux/irqdomain.h>
> > +#include <linux/irq.h>
> > +#include <linux/mfd/imx25-tsadc.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +
> > +static struct regmap_config mx25_tsadc_regmap_config = {
> > +	.fast_io = true,
> > +	.max_register = 8,
> > +	.reg_bits = 32,
> > +	.val_bits = 32,
> > +	.reg_stride = 4,
> > +};
> > +
> > +static void mx25_tsadc_irq_handler(struct irq_desc *desc)
> > +{
> > +	struct mx25_tsadc *tsadc = irq_desc_get_handler_data(desc);
> > +	struct irq_chip *chip = irq_desc_get_chip(desc);
> > +	u32 status;
> > +
> > +	chained_irq_enter(chip, desc);
> > +
> > +	regmap_read(tsadc->regs, MX25_TSC_TGSR, &status);
> > +
> > +	if (status & MX25_TGSR_GCQ_INT)
> > +		generic_handle_irq(irq_find_mapping(tsadc->domain, 1));
> > +
> > +	if (status & MX25_TGSR_TCQ_INT)
> > +		generic_handle_irq(irq_find_mapping(tsadc->domain, 0));
> > +
> > +	chained_irq_exit(chip, desc);
> > +}
> > +
> > +static int mx25_tsadc_domain_map(struct irq_domain *d, unsigned int irq,
> > +				 irq_hw_number_t hwirq)
> > +{
> > +	struct mx25_tsadc *tsadc = d->host_data;
> > +
> > +	irq_set_chip_data(irq, tsadc);
> > +	irq_set_chip_and_handler(irq, &dummy_irq_chip,
> > +				 handle_level_irq);
> > +	irq_modify_status(irq, IRQ_NOREQUEST, IRQ_NOPROBE);
> > +
> > +	return 0;
> > +}
> > +
> > +static struct irq_domain_ops mx25_tsadc_domain_ops = {
> > +	.map = mx25_tsadc_domain_map,
> > +	.xlate = irq_domain_xlate_onecell,
> > +};
> > +
> > +static int mx25_tsadc_setup_irq(struct platform_device *pdev,
> > +				struct mx25_tsadc *tsadc)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct device_node *np = dev->of_node;
> > +	int irq;
> > +
> > +	irq = platform_get_irq(pdev, 0);
> > +	if (irq <= 0) {
> > +		dev_err(dev, "Failed to get irq\n");
> > +		return irq;
> > +	}
> > +
> > +	tsadc->domain = irq_domain_add_simple(np, 2, 0, &mx25_tsadc_domain_ops,
> > +					      tsadc);
> > +	if (!tsadc->domain) {
> > +		dev_err(dev, "Failed to add irq domain\n");
> > +		return -ENOMEM;
> > +	}
> > +
> > +	irq_set_chained_handler(irq, mx25_tsadc_irq_handler);
> > +	irq_set_handler_data(irq, tsadc);
> > +
> > +	return 0;
> > +}
> > +
> > +static void mx25_tsadc_setup_clk(struct platform_device *pdev,
> > +				 struct mx25_tsadc *tsadc)
> > +{
> > +	unsigned clk_div;
> > +
> > +	/*
> > +	 * According to the datasheet the ADC clock should never
> > +	 * exceed 1,75 MHz. Base clock is the IPG and the ADC unit uses
> > +	 * a funny clock divider. To keep the time constant the ADC needs to do
> > +	 * one conversion, adapt the ADC internal clock divider to
> > +	 * the available IPG
> I'm not entirely following this explanation...
> maybe

Thanks, this is indeed a bit misleading. It should be something like this:

	To keep the ADC conversion time constant adapt the ADC internal clock
	divider to the IPG clock rate.

Will fix it.

Best Regards,

Markus

> 
> ...one conversion, then adapt the ADC...
> 
> > +	 */
> > +
> > +	dev_dbg(&pdev->dev, "Found master clock at %lu Hz\n",
> > +		clk_get_rate(tsadc->clk));
> > +
> > +	clk_div = DIV_ROUND_UP(clk_get_rate(tsadc->clk), 1750000);
> > +	dev_dbg(&pdev->dev, "Setting up ADC clock divider to %u\n", clk_div);
> > +
> > +	/* adc clock = IPG clock / (2 * div + 2) */
> > +	clk_div -= 2;
> > +	clk_div /= 2;
> > +
> > +	/*
> > +	 * the ADC clock divider changes its behaviour when values below 4
> > +	 * are used: it is fixed to "/ 10" in this case
> > +	 */
> > +	clk_div = max_t(unsigned, 4, clk_div);
> > +
> > +	dev_dbg(&pdev->dev, "Resulting ADC conversion clock at %lu Hz\n",
> > +		clk_get_rate(tsadc->clk) / (2 * clk_div + 2));
> > +
> > +	regmap_update_bits(tsadc->regs, MX25_TSC_TGCR,
> > +			   MX25_TGCR_ADCCLKCFG(0x1f),
> > +			   MX25_TGCR_ADCCLKCFG(clk_div));
> > +}
> > +
> > +static int mx25_tsadc_probe(struct platform_device *pdev)
> > +{
> > +	struct device *dev = &pdev->dev;
> > +	struct device_node *np = dev->of_node;
> > +	struct mx25_tsadc *tsadc;
> > +	struct resource *res;
> > +	int ret;
> > +	void __iomem *iomem;
> > +
> > +	tsadc = devm_kzalloc(dev, sizeof(*tsadc), GFP_KERNEL);
> > +	if (!tsadc)
> > +		return -ENOMEM;
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	iomem = devm_ioremap_resource(dev, res);
> > +	if (IS_ERR(iomem))
> > +		return PTR_ERR(iomem);
> > +
> > +	tsadc->regs = devm_regmap_init_mmio(dev, iomem,
> > +					    &mx25_tsadc_regmap_config);
> > +	if (IS_ERR(tsadc->regs)) {
> > +		dev_err(dev, "Failed to initialize regmap\n");
> > +		return PTR_ERR(tsadc->regs);
> > +	}
> > +
> > +	tsadc->clk = devm_clk_get(dev, "ipg");
> > +	if (IS_ERR(tsadc->clk)) {
> > +		dev_err(dev, "Failed to get ipg clock\n");
> > +		return PTR_ERR(tsadc->clk);
> > +	}
> > +
> > +	/* setup clock according to the datasheet */
> > +	mx25_tsadc_setup_clk(pdev, tsadc);
> > +
> > +	/* Enable clock and reset the component */
> > +	regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_CLK_EN,
> > +			   MX25_TGCR_CLK_EN);
> > +	regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_TSC_RST,
> > +			   MX25_TGCR_TSC_RST);
> > +
> > +	/* Setup powersaving mode, but enable internal reference voltage */
> > +	regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_POWERMODE_MASK,
> > +			   MX25_TGCR_POWERMODE_SAVE);
> > +	regmap_update_bits(tsadc->regs, MX25_TSC_TGCR, MX25_TGCR_INTREFEN,
> > +			   MX25_TGCR_INTREFEN);
> > +
> > +	ret = mx25_tsadc_setup_irq(pdev, tsadc);
> > +	if (ret)
> > +		return ret;
> > +
> > +	platform_set_drvdata(pdev, tsadc);
> > +
> > +	of_platform_populate(np, NULL, NULL, dev);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct of_device_id mx25_tsadc_ids[] = {
> > +	{ .compatible = "fsl,imx25-tsadc" },
> > +	{ /* Sentinel */ }
> > +};
> > +
> > +static struct platform_driver mx25_tsadc_driver = {
> > +	.driver = {
> > +		.name = "mx25-tsadc",
> > +		.of_match_table = of_match_ptr(mx25_tsadc_ids),
> > +	},
> > +	.probe = mx25_tsadc_probe,
> > +};
> > +module_platform_driver(mx25_tsadc_driver);
> > +
> > +MODULE_DESCRIPTION("MFD for ADC/TSC for Freescale mx25");
> > +MODULE_AUTHOR("Markus Pargmann <mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>");
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_ALIAS("platform:mx25-tsadc");
> > diff --git a/include/linux/mfd/imx25-tsadc.h b/include/linux/mfd/imx25-tsadc.h
> > new file mode 100644
> > index 000000000000..7fe4b8c3baac
> > --- /dev/null
> > +++ b/include/linux/mfd/imx25-tsadc.h
> > @@ -0,0 +1,140 @@
> > +#ifndef _LINUX_INCLUDE_MFD_IMX25_TSADC_H_
> > +#define _LINUX_INCLUDE_MFD_IMX25_TSADC_H_
> > +
> > +struct regmap;
> > +struct clk;
> > +
> > +struct mx25_tsadc {
> > +	struct regmap *regs;
> > +	struct irq_domain *domain;
> > +	struct clk *clk;
> > +};
> > +
> > +#define MX25_TSC_TGCR			0x00
> > +#define MX25_TSC_TGSR			0x04
> > +#define MX25_TSC_TICR			0x08
> > +
> > +/* The same register layout for TC and GC queue */
> > +#define MX25_ADCQ_FIFO			0x00
> > +#define MX25_ADCQ_CR			0x04
> > +#define MX25_ADCQ_SR			0x08
> > +#define MX25_ADCQ_MR			0x0c
> > +#define MX25_ADCQ_ITEM_7_0		0x20
> > +#define MX25_ADCQ_ITEM_15_8		0x24
> > +#define MX25_ADCQ_CFG(n)		(0x40 + ((n) * 0x4))
> > +
> > +#define MX25_ADCQ_MR_MASK		0xffffffff
> > +
> > +/* TGCR */
> > +#define MX25_TGCR_PDBTIME(x)		((x) << 25)
> > +#define MX25_TGCR_PDBTIME_MASK		GENMASK(31, 25)
> > +#define MX25_TGCR_PDBEN			BIT(24)
> > +#define MX25_TGCR_PDEN			BIT(23)
> > +#define MX25_TGCR_ADCCLKCFG(x)		((x) << 16)
> > +#define MX25_TGCR_GET_ADCCLK(x)		(((x) >> 16) & 0x1f)
> > +#define MX25_TGCR_INTREFEN		BIT(10)
> > +#define MX25_TGCR_POWERMODE_MASK	GENMASK(9, 8)
> > +#define MX25_TGCR_POWERMODE_SAVE	(1 << 8)
> > +#define MX25_TGCR_POWERMODE_ON		(2 << 8)
> > +#define MX25_TGCR_STLC			BIT(5)
> > +#define MX25_TGCR_SLPC			BIT(4)
> > +#define MX25_TGCR_FUNC_RST		BIT(2)
> > +#define MX25_TGCR_TSC_RST		BIT(1)
> > +#define MX25_TGCR_CLK_EN		BIT(0)
> > +
> > +/* TGSR */
> > +#define MX25_TGSR_SLP_INT		BIT(2)
> > +#define MX25_TGSR_GCQ_INT		BIT(1)
> > +#define MX25_TGSR_TCQ_INT		BIT(0)
> > +
> > +/* ADCQ_ITEM_* */
> > +#define _MX25_ADCQ_ITEM(item, x)	((x) << ((item) * 4))
> > +#define MX25_ADCQ_ITEM(item, x)		((item) >= 8 ? \
> > +		_MX25_ADCQ_ITEM((item) - 8, (x)) : _MX25_ADCQ_ITEM((item), (x)))
> > +
> > +/* ADCQ_FIFO (TCQFIFO and GCQFIFO) */
> > +#define MX25_ADCQ_FIFO_DATA(x)		(((x) >> 4) & 0xfff)
> > +#define MX25_ADCQ_FIFO_ID(x)		((x) & 0xf)
> > +
> > +/* ADCQ_CR (TCQR and GCQR) */
> > +#define MX25_ADCQ_CR_PDCFG_LEVEL	BIT(19)
> > +#define MX25_ADCQ_CR_PDMSK		BIT(18)
> > +#define MX25_ADCQ_CR_FRST		BIT(17)
> > +#define MX25_ADCQ_CR_QRST		BIT(16)
> > +#define MX25_ADCQ_CR_RWAIT_MASK		GENMASK(15, 12)
> > +#define MX25_ADCQ_CR_RWAIT(x)		((x) << 12)
> > +#define MX25_ADCQ_CR_WMRK_MASK		GENMASK(11, 8)
> > +#define MX25_ADCQ_CR_WMRK(x)		((x) << 8)
> > +#define MX25_ADCQ_CR_LITEMID_MASK	(0xf << 4)
> > +#define MX25_ADCQ_CR_LITEMID(x)		((x) << 4)
> > +#define MX25_ADCQ_CR_RPT		BIT(3)
> > +#define MX25_ADCQ_CR_FQS		BIT(2)
> > +#define MX25_ADCQ_CR_QSM_MASK		GENMASK(1, 0)
> > +#define MX25_ADCQ_CR_QSM_PD		0x1
> > +#define MX25_ADCQ_CR_QSM_FQS		0x2
> > +#define MX25_ADCQ_CR_QSM_FQS_PD		0x3
> > +
> > +/* ADCQ_SR (TCQSR and GCQSR) */
> > +#define MX25_ADCQ_SR_FDRY		BIT(15)
> > +#define MX25_ADCQ_SR_FULL		BIT(14)
> > +#define MX25_ADCQ_SR_EMPT		BIT(13)
> > +#define MX25_ADCQ_SR_FDN(x)		(((x) >> 8) & 0x1f)
> > +#define MX25_ADCQ_SR_FRR		BIT(6)
> > +#define MX25_ADCQ_SR_FUR		BIT(5)
> > +#define MX25_ADCQ_SR_FOR		BIT(4)
> > +#define MX25_ADCQ_SR_EOQ		BIT(1)
> > +#define MX25_ADCQ_SR_PD			BIT(0)
> > +
> > +/* ADCQ_MR (TCQMR and GCQMR) */
> > +#define MX25_ADCQ_MR_FDRY_DMA		BIT(31)
> > +#define MX25_ADCQ_MR_FER_DMA		BIT(22)
> > +#define MX25_ADCQ_MR_FUR_DMA		BIT(21)
> > +#define MX25_ADCQ_MR_FOR_DMA		BIT(20)
> > +#define MX25_ADCQ_MR_EOQ_DMA		BIT(17)
> > +#define MX25_ADCQ_MR_PD_DMA		BIT(16)
> > +#define MX25_ADCQ_MR_FDRY_IRQ		BIT(15)
> > +#define MX25_ADCQ_MR_FER_IRQ		BIT(6)
> > +#define MX25_ADCQ_MR_FUR_IRQ		BIT(5)
> > +#define MX25_ADCQ_MR_FOR_IRQ		BIT(4)
> > +#define MX25_ADCQ_MR_EOQ_IRQ		BIT(1)
> > +#define MX25_ADCQ_MR_PD_IRQ		BIT(0)
> > +
> > +/* ADCQ_CFG (TICR, TCC0-7,GCC0-7) */
> > +#define MX25_ADCQ_CFG_SETTLING_TIME(x)	((x) << 24)
> > +#define MX25_ADCQ_CFG_IGS		(1 << 20)
> > +#define MX25_ADCQ_CFG_NOS_MASK		GENMASK(19, 16)
> > +#define MX25_ADCQ_CFG_NOS(x)		(((x) - 1) << 16)
> > +#define MX25_ADCQ_CFG_WIPER		(1 << 15)
> > +#define MX25_ADCQ_CFG_YNLR		(1 << 14)
> > +#define MX25_ADCQ_CFG_YPLL_HIGH		(0 << 12)
> > +#define MX25_ADCQ_CFG_YPLL_OFF		(1 << 12)
> > +#define MX25_ADCQ_CFG_YPLL_LOW		(3 << 12)
> > +#define MX25_ADCQ_CFG_XNUR_HIGH		(0 << 10)
> > +#define MX25_ADCQ_CFG_XNUR_OFF		(1 << 10)
> > +#define MX25_ADCQ_CFG_XNUR_LOW		(3 << 10)
> > +#define MX25_ADCQ_CFG_XPUL_HIGH		(0 << 9)
> > +#define MX25_ADCQ_CFG_XPUL_OFF		(1 << 9)
> > +#define MX25_ADCQ_CFG_REFP(sel)		((sel) << 7)
> > +#define MX25_ADCQ_CFG_REFP_YP		MX25_ADCQ_CFG_REFP(0)
> > +#define MX25_ADCQ_CFG_REFP_XP		MX25_ADCQ_CFG_REFP(1)
> > +#define MX25_ADCQ_CFG_REFP_EXT		MX25_ADCQ_CFG_REFP(2)
> > +#define MX25_ADCQ_CFG_REFP_INT		MX25_ADCQ_CFG_REFP(3)
> > +#define MX25_ADCQ_CFG_REFP_MASK		GENMASK(8, 7)
> > +#define MX25_ADCQ_CFG_IN(sel)		((sel) << 4)
> > +#define MX25_ADCQ_CFG_IN_XP		MX25_ADCQ_CFG_IN(0)
> > +#define MX25_ADCQ_CFG_IN_YP		MX25_ADCQ_CFG_IN(1)
> > +#define MX25_ADCQ_CFG_IN_XN		MX25_ADCQ_CFG_IN(2)
> > +#define MX25_ADCQ_CFG_IN_YN		MX25_ADCQ_CFG_IN(3)
> > +#define MX25_ADCQ_CFG_IN_WIPER		MX25_ADCQ_CFG_IN(4)
> > +#define MX25_ADCQ_CFG_IN_AUX0		MX25_ADCQ_CFG_IN(5)
> > +#define MX25_ADCQ_CFG_IN_AUX1		MX25_ADCQ_CFG_IN(6)
> > +#define MX25_ADCQ_CFG_IN_AUX2		MX25_ADCQ_CFG_IN(7)
> > +#define MX25_ADCQ_CFG_REFN(sel)		((sel) << 2)
> > +#define MX25_ADCQ_CFG_REFN_XN		MX25_ADCQ_CFG_REFN(0)
> > +#define MX25_ADCQ_CFG_REFN_YN		MX25_ADCQ_CFG_REFN(1)
> > +#define MX25_ADCQ_CFG_REFN_NGND		MX25_ADCQ_CFG_REFN(2)
> > +#define MX25_ADCQ_CFG_REFN_NGND2	MX25_ADCQ_CFG_REFN(3)
> > +#define MX25_ADCQ_CFG_REFN_MASK		GENMASK(3, 2)
> > +#define MX25_ADCQ_CFG_PENIACK		(1 << 1)
> > +
> > +#endif  /* _LINUX_INCLUDE_MFD_IMX25_TSADC_H_ */
> > 
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |