From: Sven Eckelmann <sven@narfation.org>
To: ath11k@lists.infradead.org
Cc: Rajkumar Manoharan <rmanohar@codeaurora.org>
Subject: Re: [PATCH v2 0/3] ath11k: Add Mesh mode support
Date: Tue, 28 May 2019 16:39:39 +0200 [thread overview]
Message-ID: <3594678.I98WQv5yxB@bentobox> (raw)
In-Reply-To: <1931905.PyyBc1jC1X@bentobox>
[-- Attachment #1.1: Type: text/plain, Size: 843 bytes --]
On Tuesday, 28 May 2019 15:48:25 CEST Sven Eckelmann wrote:
[...]
> What else is required to get this working? I used ath11k-bringup (which
> included these patches) and wanted to implement the HE registration part for
> it. But it turns out that it doesn't event work here with VHT. This is what
I
> did on two HK01 rev B:
[...]
Just talked to John. It seems that mesh at the moment only "works" when using
legacy (non-HT) mode (this is what he used previously - so mesh join without
freq and bandwidth):
iw phy phy2 interface add mesh2 type mp
ip link set up dev mesh2
iw dev mesh2 mesh join testmesh
But the HT/VHT stuff is just crashing the firmware as shown in the last mail.
iw dev mesh2 mesh join testmesh freq 5180 80MHz
Also tested ph1 with "freq 2412 HT20" and it crashed the same way.
Kind regards,
Sven
[-- Attachment #1.2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
next prev parent reply other threads:[~2019-05-28 14:39 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-19 18:11 [PATCH v2 0/3] ath11k: Add Mesh mode support Rajkumar Manoharan
2019-04-19 18:11 ` [PATCH v2 1/3] ath11k: enable mesh mode Rajkumar Manoharan
2019-04-19 18:11 ` [PATCH v2 2/3] ath11k: allow 4 address transmission for mesh packet Rajkumar Manoharan
2019-04-19 18:11 ` [PATCH v2 3/3] ath11k: remove unnecessary check for PMF Rajkumar Manoharan
2019-05-28 13:48 ` [PATCH v2 0/3] ath11k: Add Mesh mode support Sven Eckelmann
2019-05-28 14:39 ` Sven Eckelmann [this message]
2019-05-29 4:26 ` Rajkumar Manoharan
2019-05-29 7:41 ` Sven Eckelmann
2019-05-29 7:52 ` Rajkumar Manoharan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3594678.I98WQv5yxB@bentobox \
--to=sven@narfation.org \
--cc=ath11k@lists.infradead.org \
--cc=rmanohar@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.