[PATCH] pinctrl: at91-pio4: use %pr format string for resource

[PATCH] pinctrl: at91-pio4: use %pr format string for resource

[Arnd Bergmann]

resource_size_t may be defined as 32 or 64 bit depending on configuration,
so it cannot be printed using the normal format strings, as gcc correctly
warns:

pinctrl-at91-pio4.c: In function 'atmel_pinctrl_probe':
pinctrl-at91-pio4.c:1003:41: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=]
   dev_dbg(dev, "bank %i: hwirq=%u\n", i, res->start);

This changes the format string to use the special "%pr" format
string that prints a resource, and changes the arguments so we
the resource structure directly. I'm also swapping out the arguments
to match the text in the format string.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
index 33edd07d9149..23217e990eaf 100644
--- a/drivers/pinctrl/pinctrl-at91-pio4.c
+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
@@ -1000,7 +1000,7 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
 		atmel_pioctrl->irqs[i] = res->start;
 		irq_set_chained_handler(res->start, atmel_gpio_irq_handler);
 		irq_set_handler_data(res->start, atmel_pioctrl);
-		dev_dbg(dev, "bank %i: hwirq=%u\n", i, res->start);
+		dev_dbg(dev, "bank %pr: hwirq=%u\n", res, i);
 	}
 
 	atmel_pioctrl->irq_domain = irq_domain_add_linear(dev->of_node,

[PATCH] pinctrl: at91-pio4: use %pr format string for resource

[Arnd Bergmann]

resource_size_t may be defined as 32 or 64 bit depending on configuration,
so it cannot be printed using the normal format strings, as gcc correctly
warns:

pinctrl-at91-pio4.c: In function 'atmel_pinctrl_probe':
pinctrl-at91-pio4.c:1003:41: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=]
   dev_dbg(dev, "bank %i: hwirq=%u\n", i, res->start);

This changes the format string to use the special "%pr" format
string that prints a resource, and changes the arguments so we
the resource structure directly. I'm also swapping out the arguments
to match the text in the format string.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
index 33edd07d9149..23217e990eaf 100644
--- a/drivers/pinctrl/pinctrl-at91-pio4.c
+++ b/drivers/pinctrl/pinctrl-at91-pio4.c
@@ -1000,7 +1000,7 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
 		atmel_pioctrl->irqs[i] = res->start;
 		irq_set_chained_handler(res->start, atmel_gpio_irq_handler);
 		irq_set_handler_data(res->start, atmel_pioctrl);
-		dev_dbg(dev, "bank %i: hwirq=%u\n", i, res->start);
+		dev_dbg(dev, "bank %pr: hwirq=%u\n", res, i);
 	}
 
 	atmel_pioctrl->irq_domain = irq_domain_add_linear(dev->of_node,

Re: [PATCH] pinctrl: at91-pio4: use %pr format string for resource

[Ludovic Desroches]

Hi Arnd,

On Thu, Nov 12, 2015 at 03:15:38PM +0100, Arnd Bergmann wrote:
> resource_size_t may be defined as 32 or 64 bit depending on configuration,
> so it cannot be printed using the normal format strings, as gcc correctly
> warns:
> 
> pinctrl-at91-pio4.c: In function 'atmel_pinctrl_probe':
> pinctrl-at91-pio4.c:1003:41: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=]
>    dev_dbg(dev, "bank %i: hwirq=%u\n", i, res->start);
> 
> This changes the format string to use the special "%pr" format
> string that prints a resource, and changes the arguments so we
> the resource structure directly. I'm also swapping out the arguments
> to match the text in the format string.
> 

I agree the format change but not swapping out the arguments. Why do you have
the feeling they are not matching the text?

Few lines before you have:
res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
atmel_pioctrl->irqs[i] = res->start;

Each bank has its own irq line this is what I want to print with hwirq.
Of course it assumes that interrupts are declared in the right order.

Regards

Ludovic

> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> 
> diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
> index 33edd07d9149..23217e990eaf 100644
> --- a/drivers/pinctrl/pinctrl-at91-pio4.c
> +++ b/drivers/pinctrl/pinctrl-at91-pio4.c
> @@ -1000,7 +1000,7 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
>  		atmel_pioctrl->irqs[i] = res->start;
>  		irq_set_chained_handler(res->start, atmel_gpio_irq_handler);
>  		irq_set_handler_data(res->start, atmel_pioctrl);
> -		dev_dbg(dev, "bank %i: hwirq=%u\n", i, res->start);
> +		dev_dbg(dev, "bank %pr: hwirq=%u\n", res, i);
>  	}
>  
>  	atmel_pioctrl->irq_domain = irq_domain_add_linear(dev->of_node,
> 

Re: [PATCH] pinctrl: at91-pio4: use %pr format string for resource

[Ludovic Desroches]

Hi Arnd,

On Thu, Nov 12, 2015 at 03:15:38PM +0100, Arnd Bergmann wrote:
> resource_size_t may be defined as 32 or 64 bit depending on configuration,
> so it cannot be printed using the normal format strings, as gcc correctly
> warns:
> 
> pinctrl-at91-pio4.c: In function 'atmel_pinctrl_probe':
> pinctrl-at91-pio4.c:1003:41: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=]
>    dev_dbg(dev, "bank %i: hwirq=%u\n", i, res->start);
> 
> This changes the format string to use the special "%pr" format
> string that prints a resource, and changes the arguments so we
> the resource structure directly. I'm also swapping out the arguments
> to match the text in the format string.
> 

I agree the format change but not swapping out the arguments. Why do you have
the feeling they are not matching the text?

Few lines before you have:
res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
atmel_pioctrl->irqs[i] = res->start;

Each bank has its own irq line this is what I want to print with hwirq.
Of course it assumes that interrupts are declared in the right order.

Regards

Ludovic

> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> 
> diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
> index 33edd07d9149..23217e990eaf 100644
> --- a/drivers/pinctrl/pinctrl-at91-pio4.c
> +++ b/drivers/pinctrl/pinctrl-at91-pio4.c
> @@ -1000,7 +1000,7 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
>  		atmel_pioctrl->irqs[i] = res->start;
>  		irq_set_chained_handler(res->start, atmel_gpio_irq_handler);
>  		irq_set_handler_data(res->start, atmel_pioctrl);
> -		dev_dbg(dev, "bank %i: hwirq=%u\n", i, res->start);
> +		dev_dbg(dev, "bank %pr: hwirq=%u\n", res, i);
>  	}
>  
>  	atmel_pioctrl->irq_domain = irq_domain_add_linear(dev->of_node,
> 

[PATCH] pinctrl: at91-pio4: use %pr format string for resource

[Ludovic Desroches]

Hi Arnd,

On Thu, Nov 12, 2015 at 03:15:38PM +0100, Arnd Bergmann wrote:
> resource_size_t may be defined as 32 or 64 bit depending on configuration,
> so it cannot be printed using the normal format strings, as gcc correctly
> warns:
> 
> pinctrl-at91-pio4.c: In function 'atmel_pinctrl_probe':
> pinctrl-at91-pio4.c:1003:41: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=]
>    dev_dbg(dev, "bank %i: hwirq=%u\n", i, res->start);
> 
> This changes the format string to use the special "%pr" format
> string that prints a resource, and changes the arguments so we
> the resource structure directly. I'm also swapping out the arguments
> to match the text in the format string.
> 

I agree the format change but not swapping out the arguments. Why do you have
the feeling they are not matching the text?

Few lines before you have:
res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
atmel_pioctrl->irqs[i] = res->start;

Each bank has its own irq line this is what I want to print with hwirq.
Of course it assumes that interrupts are declared in the right order.

Regards

Ludovic

> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> 
> diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
> index 33edd07d9149..23217e990eaf 100644
> --- a/drivers/pinctrl/pinctrl-at91-pio4.c
> +++ b/drivers/pinctrl/pinctrl-at91-pio4.c
> @@ -1000,7 +1000,7 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
>  		atmel_pioctrl->irqs[i] = res->start;
>  		irq_set_chained_handler(res->start, atmel_gpio_irq_handler);
>  		irq_set_handler_data(res->start, atmel_pioctrl);
> -		dev_dbg(dev, "bank %i: hwirq=%u\n", i, res->start);
> +		dev_dbg(dev, "bank %pr: hwirq=%u\n", res, i);
>  	}
>  
>  	atmel_pioctrl->irq_domain = irq_domain_add_linear(dev->of_node,
> 

Re: [PATCH] pinctrl: at91-pio4: use %pr format string for resource

[Arnd Bergmann]

On Tuesday 17 November 2015 14:33:41 Ludovic Desroches wrote:
> Hi Arnd,
> 
> On Thu, Nov 12, 2015 at 03:15:38PM +0100, Arnd Bergmann wrote:
> > resource_size_t may be defined as 32 or 64 bit depending on configuration,
> > so it cannot be printed using the normal format strings, as gcc correctly
> > warns:
> > 
> > pinctrl-at91-pio4.c: In function 'atmel_pinctrl_probe':
> > pinctrl-at91-pio4.c:1003:41: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=]
> >    dev_dbg(dev, "bank %i: hwirq=%u\n", i, res->start);
> > 
> > This changes the format string to use the special "%pr" format
> > string that prints a resource, and changes the arguments so we
> > the resource structure directly. I'm also swapping out the arguments
> > to match the text in the format string.
> > 
> 
> I agree the format change but not swapping out the arguments. Why do you have
> the feeling they are not matching the text?
> 
> Few lines before you have:
> res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
> atmel_pioctrl->irqs[i] = res->start;
> 
> Each bank has its own irq line this is what I want to print with hwirq.
> Of course it assumes that interrupts are declared in the right order.

Sorry, my mistake. You are completely right and I don't know how I concluded
it was wrong. It's possible I got confused by the 'hwirq' string and thought
it could not refer to the resource, which is a virtual irq number rather than
a hwirq.

Anyway, I'll submit a new version with this fixup folded in:

@@ -1000,7 +1000,7 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
                atmel_pioctrl->irqs[i] = res->start;
                irq_set_chained_handler(res->start, atmel_gpio_irq_handler);
                irq_set_handler_data(res->start, atmel_pioctrl);
-               dev_dbg(dev, "bank %pr: hwirq=%u\n", res, i);
+               dev_dbg(dev, "bank %i: irq=%pr\n", i, res);
        }
 
        atmel_pioctrl->irq_domain = irq_domain_add_linear(dev->of_node,

	Arnd

[PATCH] pinctrl: at91-pio4: use %pr format string for resource

[Arnd Bergmann]

On Tuesday 17 November 2015 14:33:41 Ludovic Desroches wrote:
> Hi Arnd,
> 
> On Thu, Nov 12, 2015 at 03:15:38PM +0100, Arnd Bergmann wrote:
> > resource_size_t may be defined as 32 or 64 bit depending on configuration,
> > so it cannot be printed using the normal format strings, as gcc correctly
> > warns:
> > 
> > pinctrl-at91-pio4.c: In function 'atmel_pinctrl_probe':
> > pinctrl-at91-pio4.c:1003:41: warning: format '%u' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t {aka long long unsigned int}' [-Wformat=]
> >    dev_dbg(dev, "bank %i: hwirq=%u\n", i, res->start);
> > 
> > This changes the format string to use the special "%pr" format
> > string that prints a resource, and changes the arguments so we
> > the resource structure directly. I'm also swapping out the arguments
> > to match the text in the format string.
> > 
> 
> I agree the format change but not swapping out the arguments. Why do you have
> the feeling they are not matching the text?
> 
> Few lines before you have:
> res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
> atmel_pioctrl->irqs[i] = res->start;
> 
> Each bank has its own irq line this is what I want to print with hwirq.
> Of course it assumes that interrupts are declared in the right order.

Sorry, my mistake. You are completely right and I don't know how I concluded
it was wrong. It's possible I got confused by the 'hwirq' string and thought
it could not refer to the resource, which is a virtual irq number rather than
a hwirq.

Anyway, I'll submit a new version with this fixup folded in:

@@ -1000,7 +1000,7 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
                atmel_pioctrl->irqs[i] = res->start;
                irq_set_chained_handler(res->start, atmel_gpio_irq_handler);
                irq_set_handler_data(res->start, atmel_pioctrl);
-               dev_dbg(dev, "bank %pr: hwirq=%u\n", res, i);
+               dev_dbg(dev, "bank %i: irq=%pr\n", i, res);
        }
 
        atmel_pioctrl->irq_domain = irq_domain_add_linear(dev->of_node,

	Arnd