From: Sean Young <sean@mess.org>
To: linux-media@vger.kernel.org, linux-usb@vger.kernel.org,
Johan Hovold <johan@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jon Rhees <support@usbuirt.com>, Oliver Neukum <oneukum@suse.com>
Subject: [PATCH v3 3/3] USB: serial: blacklist USB-UIRT when driver is selected
Date: Thu, 6 May 2021 13:44:55 +0100 [thread overview]
Message-ID: <37339f4102666345168a738d0ffd80d8133a6a03.1620304986.git.sean@mess.org> (raw)
In-Reply-To: <cover.1620304986.git.sean@mess.org>
The USB-UIRT device has its own driver, so blacklist the fdti driver
from using it if the driver has been enabled.
Signed-off-by: Sean Young <sean@mess.org>
---
drivers/usb/serial/ftdi_sio.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 542073d2f0dd..2320bda57796 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -95,7 +95,9 @@ static int ftdi_jtag_probe(struct usb_serial *serial);
static int ftdi_NDI_device_setup(struct usb_serial *serial);
static int ftdi_stmclite_probe(struct usb_serial *serial);
static int ftdi_8u2232c_probe(struct usb_serial *serial);
+#if !IS_ENABLED(CONFIG_IR_UIRT)
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv);
+#endif
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
static const struct ftdi_sio_quirk ftdi_jtag_quirk = {
@@ -106,9 +108,11 @@ static const struct ftdi_sio_quirk ftdi_NDI_device_quirk = {
.probe = ftdi_NDI_device_setup,
};
+#if !IS_ENABLED(CONFIG_IR_UIRT)
static const struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
.port_probe = ftdi_USB_UIRT_setup,
};
+#endif
static const struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
.port_probe = ftdi_HE_TIRA1_setup,
@@ -568,8 +572,10 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(OCT_VID, OCT_DK201_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_HE_TIRA1_PID),
.driver_info = (kernel_ulong_t)&ftdi_HE_TIRA1_quirk },
+#if !IS_ENABLED(CONFIG_IR_UIRT)
{ USB_DEVICE(FTDI_VID, FTDI_USB_UIRT_PID),
.driver_info = (kernel_ulong_t)&ftdi_USB_UIRT_quirk },
+#endif
{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_1) },
{ USB_DEVICE(FTDI_VID, PROTEGO_R2X0) },
{ USB_DEVICE(FTDI_VID, PROTEGO_SPECIAL_3) },
@@ -2292,6 +2298,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
return 0;
}
+#if !IS_ENABLED(CONFIG_IR_UIRT)
/* Setup for the USB-UIRT device, which requires hardwired
* baudrate (38400 gets mapped to 312500) */
/* Called from usbserial:serial_probe */
@@ -2301,6 +2308,7 @@ static void ftdi_USB_UIRT_setup(struct ftdi_private *priv)
priv->custom_divisor = 77;
priv->force_baud = 38400;
}
+#endif
/* Setup for the HE-TIRA1 device, which requires hardwired
* baudrate (38400 gets mapped to 100000) and RTS-CTS enabled. */
--
2.31.1
next prev parent reply other threads:[~2021-05-06 12:45 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-06 12:44 [PATCH v3 0/3] IR driver for USB-UIRT device Sean Young
2021-05-06 12:44 ` [PATCH v3 1/3] USB: serial: move ftdi_sio.h into include directories Sean Young
2021-05-14 11:16 ` Johan Hovold
2021-05-06 12:44 ` [PATCH v3 2/3] media: rc: new driver for USB-UIRT device Sean Young
2021-05-14 11:38 ` Johan Hovold
2021-05-15 9:52 ` Sean Young
2021-05-17 9:38 ` Johan Hovold
2021-05-06 12:44 ` Sean Young [this message]
2021-05-14 11:40 ` [PATCH v3 3/3] USB: serial: blacklist USB-UIRT when driver is selected Johan Hovold
2021-05-15 9:56 ` Sean Young
2021-05-17 9:40 ` Johan Hovold
2021-05-10 8:15 ` [PATCH v3 0/3] IR driver for USB-UIRT device Johan Hovold
2021-05-11 10:32 ` Sean Young
2021-05-14 11:16 ` Johan Hovold
2021-05-15 9:22 ` Sean Young
2021-05-17 9:30 ` Johan Hovold
2021-05-17 10:35 ` Sean Young
2021-05-17 12:35 ` Sean Young
2021-05-20 13:40 ` Johan Hovold
2021-05-20 13:31 ` Johan Hovold
2021-05-21 11:39 ` Sean Young
2021-06-23 12:48 ` Johan Hovold
2021-05-25 12:25 ` Oliver Neukum
2021-06-23 13:10 ` Johan Hovold
2021-06-24 9:13 ` Sean Young
2021-06-24 9:41 ` Johan Hovold
2021-06-25 8:08 ` Sean Young
2021-07-02 10:44 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=37339f4102666345168a738d0ffd80d8133a6a03.1620304986.git.sean@mess.org \
--to=sean@mess.org \
--cc=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=oneukum@suse.com \
--cc=support@usbuirt.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.