All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Asutosh Das (asd)" <asutoshd@codeaurora.org>
To: Stanley Chu <stanley.chu@mediatek.com>,
	linux-scsi@vger.kernel.org, martin.petersen@oracle.com,
	avri.altman@wdc.com, alim.akhtar@samsung.com, jejb@linux.ibm.com
Cc: beanhuo@micron.com, cang@codeaurora.org, matthias.bgg@gmail.com,
	bvanassche@acm.org, linux-mediatek@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kuohong.wang@mediatek.com,
	peter.wang@mediatek.com, chun-hung.wu@mediatek.com,
	andy.teng@mediatek.com
Subject: Re: [PATCH v1 4/4] scsi: ufs: Fix WriteBooster flush during runtime suspend
Date: Tue, 12 May 2020 10:04:03 -0700	[thread overview]
Message-ID: <3740c6fa-77f1-53eb-ec8e-8f9d09f2646f@codeaurora.org> (raw)
In-Reply-To: <20200512104750.8711-5-stanley.chu@mediatek.com>

Hi Stanley,

On 5/12/2020 3:47 AM, Stanley Chu wrote:
> Currently UFS host driver promises VCC supply if UFS device
> needs to do WriteBooster flush during runtime suspend.
> 
> However the UFS specification mentions,
> 
> "While the flushing operation is in progress, the device is
> in Active power mode."
> 
> Therefore UFS host driver needs to promise more: Keep UFS
> device as "Active power mode", otherwise UFS device shall not
> do any flush if device enters Sleep or PowerDown power mode.
> 
> Fix this by not changing device power mode if WriteBooster
> flush is required in ufshcd_suspend().
> 
> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
> ---
>   drivers/scsi/ufs/ufs.h    |  1 -
>   drivers/scsi/ufs/ufshcd.c | 39 +++++++++++++++++++--------------------
>   2 files changed, 19 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
> index b3135344ab3f..9e4bc2e97ada 100644
> --- a/drivers/scsi/ufs/ufs.h
> +++ b/drivers/scsi/ufs/ufs.h
> @@ -577,7 +577,6 @@ struct ufs_dev_info {
>   	u32 d_ext_ufs_feature_sup;
>   	u8 b_wb_buffer_type;
>   	u32 d_wb_alloc_units;
> -	bool keep_vcc_on;
>   	u8 b_presrv_uspc_en;
>   };
>   
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 169a3379e468..2d0aff8ac260 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -8101,8 +8101,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
>   	    !hba->dev_info.is_lu_power_on_wp) {
>   		ufshcd_setup_vreg(hba, false);
>   	} else if (!ufshcd_is_ufs_dev_active(hba)) {
> -		if (!hba->dev_info.keep_vcc_on)
> -			ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
> +		ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
>   		if (!ufshcd_is_link_active(hba)) {
>   			ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
>   			ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2);
> @@ -8172,6 +8171,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>   	enum ufs_pm_level pm_lvl;
>   	enum ufs_dev_pwr_mode req_dev_pwr_mode;
>   	enum uic_link_state req_link_state;
> +	bool keep_curr_dev_pwr_mode = false;
>   
>   	hba->pm_op_in_progress = 1;
>   	if (!ufshcd_is_shutdown_pm(pm_op)) {
> @@ -8226,28 +8226,27 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>   			/* make sure that auto bkops is disabled */
>   			ufshcd_disable_auto_bkops(hba);
>   		}
> +
>   		/*
> -		 * With wb enabled, if the bkops is enabled or if the
> -		 * configured WB type is 70% full, keep vcc ON
> -		 * for the device to flush the wb buffer
> +		 * If device needs to do BKOP or WB buffer flush, keep device
> +		 * power mode as "active power mode" and its VCC supply.
>   		 */
> -		if ((hba->auto_bkops_enabled && ufshcd_is_wb_allowed(hba)) ||
> -		    ufshcd_wb_keep_vcc_on(hba))
> -			hba->dev_info.keep_vcc_on = true;
> -		else
> -			hba->dev_info.keep_vcc_on = false;
> -	} else {
> -		hba->dev_info.keep_vcc_on = false;
> +		keep_curr_dev_pwr_mode = hba->auto_bkops_enabled ||
> +			ufshcd_wb_keep_vcc_on(hba);
>   	}
>   
> -	if ((req_dev_pwr_mode != hba->curr_dev_pwr_mode) &&
> -	    ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
> -	    !ufshcd_is_runtime_pm(pm_op))) {
> -		/* ensure that bkops is disabled */
> -		ufshcd_disable_auto_bkops(hba);
> -		ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
> -		if (ret)
> -			goto enable_gating;
> +	if (req_dev_pwr_mode != hba->curr_dev_pwr_mode) {
> +		if ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
> +		    !ufshcd_is_runtime_pm(pm_op)) {
> +			/* ensure that bkops is disabled */
> +			ufshcd_disable_auto_bkops(hba);
> +		}
> +
> +		if (!keep_curr_dev_pwr_mode) {
> +			ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
> +			if (ret)
> +				goto enable_gating;
> +		}
>   	}
>   
>   	flush_work(&hba->eeh_work);
> 

Can you please confirm that you've tested and found that with the 
previous code, the flush operation in the device was not happening.

If so, please can you let me know the test-case that you ran to figure 
this out.

I'd like to verify this at my end.

--
Thanks,
-asd

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
Linux Foundation Collaborative Project

WARNING: multiple messages have this Message-ID (diff)
From: "Asutosh Das (asd)" <asutoshd@codeaurora.org>
To: Stanley Chu <stanley.chu@mediatek.com>,
	linux-scsi@vger.kernel.org, martin.petersen@oracle.com,
	avri.altman@wdc.com, alim.akhtar@samsung.com, jejb@linux.ibm.com
Cc: bvanassche@acm.org, andy.teng@mediatek.com,
	chun-hung.wu@mediatek.com, kuohong.wang@mediatek.com,
	linux-kernel@vger.kernel.org, cang@codeaurora.org,
	linux-mediatek@lists.infradead.org, peter.wang@mediatek.com,
	matthias.bgg@gmail.com, linux-arm-kernel@lists.infradead.org,
	beanhuo@micron.com
Subject: Re: [PATCH v1 4/4] scsi: ufs: Fix WriteBooster flush during runtime suspend
Date: Tue, 12 May 2020 10:04:03 -0700	[thread overview]
Message-ID: <3740c6fa-77f1-53eb-ec8e-8f9d09f2646f@codeaurora.org> (raw)
In-Reply-To: <20200512104750.8711-5-stanley.chu@mediatek.com>

Hi Stanley,

On 5/12/2020 3:47 AM, Stanley Chu wrote:
> Currently UFS host driver promises VCC supply if UFS device
> needs to do WriteBooster flush during runtime suspend.
> 
> However the UFS specification mentions,
> 
> "While the flushing operation is in progress, the device is
> in Active power mode."
> 
> Therefore UFS host driver needs to promise more: Keep UFS
> device as "Active power mode", otherwise UFS device shall not
> do any flush if device enters Sleep or PowerDown power mode.
> 
> Fix this by not changing device power mode if WriteBooster
> flush is required in ufshcd_suspend().
> 
> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
> ---
>   drivers/scsi/ufs/ufs.h    |  1 -
>   drivers/scsi/ufs/ufshcd.c | 39 +++++++++++++++++++--------------------
>   2 files changed, 19 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
> index b3135344ab3f..9e4bc2e97ada 100644
> --- a/drivers/scsi/ufs/ufs.h
> +++ b/drivers/scsi/ufs/ufs.h
> @@ -577,7 +577,6 @@ struct ufs_dev_info {
>   	u32 d_ext_ufs_feature_sup;
>   	u8 b_wb_buffer_type;
>   	u32 d_wb_alloc_units;
> -	bool keep_vcc_on;
>   	u8 b_presrv_uspc_en;
>   };
>   
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 169a3379e468..2d0aff8ac260 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -8101,8 +8101,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
>   	    !hba->dev_info.is_lu_power_on_wp) {
>   		ufshcd_setup_vreg(hba, false);
>   	} else if (!ufshcd_is_ufs_dev_active(hba)) {
> -		if (!hba->dev_info.keep_vcc_on)
> -			ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
> +		ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
>   		if (!ufshcd_is_link_active(hba)) {
>   			ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
>   			ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2);
> @@ -8172,6 +8171,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>   	enum ufs_pm_level pm_lvl;
>   	enum ufs_dev_pwr_mode req_dev_pwr_mode;
>   	enum uic_link_state req_link_state;
> +	bool keep_curr_dev_pwr_mode = false;
>   
>   	hba->pm_op_in_progress = 1;
>   	if (!ufshcd_is_shutdown_pm(pm_op)) {
> @@ -8226,28 +8226,27 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>   			/* make sure that auto bkops is disabled */
>   			ufshcd_disable_auto_bkops(hba);
>   		}
> +
>   		/*
> -		 * With wb enabled, if the bkops is enabled or if the
> -		 * configured WB type is 70% full, keep vcc ON
> -		 * for the device to flush the wb buffer
> +		 * If device needs to do BKOP or WB buffer flush, keep device
> +		 * power mode as "active power mode" and its VCC supply.
>   		 */
> -		if ((hba->auto_bkops_enabled && ufshcd_is_wb_allowed(hba)) ||
> -		    ufshcd_wb_keep_vcc_on(hba))
> -			hba->dev_info.keep_vcc_on = true;
> -		else
> -			hba->dev_info.keep_vcc_on = false;
> -	} else {
> -		hba->dev_info.keep_vcc_on = false;
> +		keep_curr_dev_pwr_mode = hba->auto_bkops_enabled ||
> +			ufshcd_wb_keep_vcc_on(hba);
>   	}
>   
> -	if ((req_dev_pwr_mode != hba->curr_dev_pwr_mode) &&
> -	    ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
> -	    !ufshcd_is_runtime_pm(pm_op))) {
> -		/* ensure that bkops is disabled */
> -		ufshcd_disable_auto_bkops(hba);
> -		ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
> -		if (ret)
> -			goto enable_gating;
> +	if (req_dev_pwr_mode != hba->curr_dev_pwr_mode) {
> +		if ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
> +		    !ufshcd_is_runtime_pm(pm_op)) {
> +			/* ensure that bkops is disabled */
> +			ufshcd_disable_auto_bkops(hba);
> +		}
> +
> +		if (!keep_curr_dev_pwr_mode) {
> +			ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
> +			if (ret)
> +				goto enable_gating;
> +		}
>   	}
>   
>   	flush_work(&hba->eeh_work);
> 

Can you please confirm that you've tested and found that with the 
previous code, the flush operation in the device was not happening.

If so, please can you let me know the test-case that you ran to figure 
this out.

I'd like to verify this at my end.

--
Thanks,
-asd

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
Linux Foundation Collaborative Project

_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek

WARNING: multiple messages have this Message-ID (diff)
From: "Asutosh Das (asd)" <asutoshd@codeaurora.org>
To: Stanley Chu <stanley.chu@mediatek.com>,
	linux-scsi@vger.kernel.org, martin.petersen@oracle.com,
	avri.altman@wdc.com, alim.akhtar@samsung.com, jejb@linux.ibm.com
Cc: bvanassche@acm.org, andy.teng@mediatek.com,
	chun-hung.wu@mediatek.com, kuohong.wang@mediatek.com,
	linux-kernel@vger.kernel.org, cang@codeaurora.org,
	linux-mediatek@lists.infradead.org, peter.wang@mediatek.com,
	matthias.bgg@gmail.com, linux-arm-kernel@lists.infradead.org,
	beanhuo@micron.com
Subject: Re: [PATCH v1 4/4] scsi: ufs: Fix WriteBooster flush during runtime suspend
Date: Tue, 12 May 2020 10:04:03 -0700	[thread overview]
Message-ID: <3740c6fa-77f1-53eb-ec8e-8f9d09f2646f@codeaurora.org> (raw)
In-Reply-To: <20200512104750.8711-5-stanley.chu@mediatek.com>

Hi Stanley,

On 5/12/2020 3:47 AM, Stanley Chu wrote:
> Currently UFS host driver promises VCC supply if UFS device
> needs to do WriteBooster flush during runtime suspend.
> 
> However the UFS specification mentions,
> 
> "While the flushing operation is in progress, the device is
> in Active power mode."
> 
> Therefore UFS host driver needs to promise more: Keep UFS
> device as "Active power mode", otherwise UFS device shall not
> do any flush if device enters Sleep or PowerDown power mode.
> 
> Fix this by not changing device power mode if WriteBooster
> flush is required in ufshcd_suspend().
> 
> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
> ---
>   drivers/scsi/ufs/ufs.h    |  1 -
>   drivers/scsi/ufs/ufshcd.c | 39 +++++++++++++++++++--------------------
>   2 files changed, 19 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
> index b3135344ab3f..9e4bc2e97ada 100644
> --- a/drivers/scsi/ufs/ufs.h
> +++ b/drivers/scsi/ufs/ufs.h
> @@ -577,7 +577,6 @@ struct ufs_dev_info {
>   	u32 d_ext_ufs_feature_sup;
>   	u8 b_wb_buffer_type;
>   	u32 d_wb_alloc_units;
> -	bool keep_vcc_on;
>   	u8 b_presrv_uspc_en;
>   };
>   
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 169a3379e468..2d0aff8ac260 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -8101,8 +8101,7 @@ static void ufshcd_vreg_set_lpm(struct ufs_hba *hba)
>   	    !hba->dev_info.is_lu_power_on_wp) {
>   		ufshcd_setup_vreg(hba, false);
>   	} else if (!ufshcd_is_ufs_dev_active(hba)) {
> -		if (!hba->dev_info.keep_vcc_on)
> -			ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
> +		ufshcd_toggle_vreg(hba->dev, hba->vreg_info.vcc, false);
>   		if (!ufshcd_is_link_active(hba)) {
>   			ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq);
>   			ufshcd_config_vreg_lpm(hba, hba->vreg_info.vccq2);
> @@ -8172,6 +8171,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>   	enum ufs_pm_level pm_lvl;
>   	enum ufs_dev_pwr_mode req_dev_pwr_mode;
>   	enum uic_link_state req_link_state;
> +	bool keep_curr_dev_pwr_mode = false;
>   
>   	hba->pm_op_in_progress = 1;
>   	if (!ufshcd_is_shutdown_pm(pm_op)) {
> @@ -8226,28 +8226,27 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>   			/* make sure that auto bkops is disabled */
>   			ufshcd_disable_auto_bkops(hba);
>   		}
> +
>   		/*
> -		 * With wb enabled, if the bkops is enabled or if the
> -		 * configured WB type is 70% full, keep vcc ON
> -		 * for the device to flush the wb buffer
> +		 * If device needs to do BKOP or WB buffer flush, keep device
> +		 * power mode as "active power mode" and its VCC supply.
>   		 */
> -		if ((hba->auto_bkops_enabled && ufshcd_is_wb_allowed(hba)) ||
> -		    ufshcd_wb_keep_vcc_on(hba))
> -			hba->dev_info.keep_vcc_on = true;
> -		else
> -			hba->dev_info.keep_vcc_on = false;
> -	} else {
> -		hba->dev_info.keep_vcc_on = false;
> +		keep_curr_dev_pwr_mode = hba->auto_bkops_enabled ||
> +			ufshcd_wb_keep_vcc_on(hba);
>   	}
>   
> -	if ((req_dev_pwr_mode != hba->curr_dev_pwr_mode) &&
> -	    ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
> -	    !ufshcd_is_runtime_pm(pm_op))) {
> -		/* ensure that bkops is disabled */
> -		ufshcd_disable_auto_bkops(hba);
> -		ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
> -		if (ret)
> -			goto enable_gating;
> +	if (req_dev_pwr_mode != hba->curr_dev_pwr_mode) {
> +		if ((ufshcd_is_runtime_pm(pm_op) && !hba->auto_bkops_enabled) ||
> +		    !ufshcd_is_runtime_pm(pm_op)) {
> +			/* ensure that bkops is disabled */
> +			ufshcd_disable_auto_bkops(hba);
> +		}
> +
> +		if (!keep_curr_dev_pwr_mode) {
> +			ret = ufshcd_set_dev_pwr_mode(hba, req_dev_pwr_mode);
> +			if (ret)
> +				goto enable_gating;
> +		}
>   	}
>   
>   	flush_work(&hba->eeh_work);
> 

Can you please confirm that you've tested and found that with the 
previous code, the flush operation in the device was not happening.

If so, please can you let me know the test-case that you ran to figure 
this out.

I'd like to verify this at my end.

--
Thanks,
-asd

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
Linux Foundation Collaborative Project

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-05-12 17:04 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-12 10:47 [PATCH v1 0/4] scsi: ufs: Fix WriteBooster and cleanup UFS driver Stanley Chu
2020-05-12 10:47 ` Stanley Chu
2020-05-12 10:47 ` Stanley Chu
2020-05-12 10:47 ` [PATCH v1 1/4] scsi: ufs: Remove unnecessary memset for dev_info Stanley Chu
2020-05-12 10:47   ` Stanley Chu
2020-05-12 10:47   ` Stanley Chu
2020-05-12 10:47 ` [PATCH v1 2/4] scsi: ufs: Allow WriteBooster on UFS 2.2 devices Stanley Chu
2020-05-12 10:47   ` Stanley Chu
2020-05-12 10:47   ` Stanley Chu
2020-05-12 10:47 ` [PATCH v1 3/4] scsi: ufs: Fix index of attributes query for WriteBooster feature Stanley Chu
2020-05-12 10:47   ` Stanley Chu
2020-05-12 10:47   ` Stanley Chu
2020-05-12 10:47 ` [PATCH v1 4/4] scsi: ufs: Fix WriteBooster flush during runtime suspend Stanley Chu
2020-05-12 10:47   ` Stanley Chu
2020-05-12 10:47   ` Stanley Chu
2020-05-12 17:04   ` Asutosh Das (asd) [this message]
2020-05-12 17:04     ` Asutosh Das (asd)
2020-05-12 17:04     ` Asutosh Das (asd)
2020-05-13  2:21     ` Stanley Chu
2020-05-13  2:21       ` Stanley Chu
2020-05-13  2:21       ` Stanley Chu
2020-05-13 19:31   ` Asutosh Das (asd)
2020-05-13 19:31     ` Asutosh Das (asd)
2020-05-13 19:31     ` Asutosh Das (asd)
2020-05-14  2:23     ` Stanley Chu
2020-05-14  2:23       ` Stanley Chu
2020-05-14  2:23       ` Stanley Chu
2020-05-14 14:49       ` Stanley Chu
2020-05-14 14:49         ` Stanley Chu
2020-05-14 14:49         ` Stanley Chu
2020-05-14 16:59         ` Asutosh Das (asd)
2020-05-14 16:59           ` Asutosh Das (asd)
2020-05-14 16:59           ` Asutosh Das (asd)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3740c6fa-77f1-53eb-ec8e-8f9d09f2646f@codeaurora.org \
    --to=asutoshd@codeaurora.org \
    --cc=alim.akhtar@samsung.com \
    --cc=andy.teng@mediatek.com \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=cang@codeaurora.org \
    --cc=chun-hung.wu@mediatek.com \
    --cc=jejb@linux.ibm.com \
    --cc=kuohong.wang@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=matthias.bgg@gmail.com \
    --cc=peter.wang@mediatek.com \
    --cc=stanley.chu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.