From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Jon Hoffman To: "'Szymon Janc'" CC: "linux-bluetooth@vger.kernel.org" Date: Mon, 15 Feb 2016 10:27:12 -0500 Subject: RE: Bluetooth PAN Connection - NAP and GN Message-ID: <3916CF28FA2C014B862815C318D03FF5A0A7493B20@Courier.syntech.org> References: <3916CF28FA2C014B862815C318D03FF5A0A7493B03@Courier.syntech.org> <2478946.W935PEPn7x@ix> <3916CF28FA2C014B862815C318D03FF5A0A7493B1E@Courier.syntech.org> In-Reply-To: <3916CF28FA2C014B862815C318D03FF5A0A7493B1E@Courier.syntech.org> Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Sender: linux-bluetooth-owner@vger.kernel.org List-ID: > > Hi, > > > > On Tuesday 09 February 2016 13:17:56 Jon Hoffman wrote: > > > Hello, > > > I am hoping that someone on this list can tell me what I am doing > > > wrong or at least point me in the right direction. > > > > > > As part of a number of proof-of-concepts, I am trying to setup a PAN > > > between two devices. For this particular proof-of-concepts I am > > > trying to setup a Bluetooth Legacy connection. I have successfully > > > setup this connection using the NAP scenario however we are not > > > looking to route anything outside of connection. Since we do not > > > want to route (security also says we need to disable routing) we > > > would prefer to use either a GN (Group Ad-Hoc > > > Network) or a PANU-PANU connection however I have been unable to > get > > > this to work. > > > > > > My slave device (where the server is being setup at) is running the > > > Linux kernel 4.4 (also tried it on a 4.1.13 kernel) with Bluez 5.35 > > > (tried it with 5.23 on the 4.1.13 kernel). I have tried three > > > master devices (device making the connection) and have the same > > > issue with all > > three. They are: > > > -Linux kernel 4.1.13 with bluez 5.23 using blueman as the UI > > > -Windows 10 > > > -iOS 9.2.1 > > > > > > I have run hcidump to see what is going on during the > > > pairing/connection of the NAP connection and also the GN connection > > > to > > see what is different. > > > Below are sniplets of what I am seeing. For the NAP connection I am > > > seeing > > > this: > > > > > > information about the NAP from the hcidump > > > record #6 > > > aid 0x0000 (SrvRecHndl) > > > uint 0x10007 > > > aid 0x0001 (SrvClassIDList) > > > < uuid-16 0x1116 (NAP) > > > > aid 0x0004 (ProtocolDescList) > > > < < uuid-16 0x0100 (L2CAP) uint 0xf > < > > > uuid-16 0x000f (BNEP) uint 0x100 < uint 0x800 uint > > > 0x806 > > > > > > aid 0x0005 (BrwGrpList) > > > < uuid-16 0x1002 (PubBrwsGrp) > > > > aid 0x0006 (LangBaseAttrIDList) > > > < uint 0x656e uint 0x6a uint 0x100 > > > > aid 0x0009 (BTProfileDescList) > > > < < uuid-16 0x1116 (NAP) uint 0x100 > > > > > aid 0x0100 (SrvName) > > > str "Network service" > > > aid 0x0101 (SrvDesc) > > > str "Network service" > > > aid 0x030a (SecurityDescription) > > > uint 0x1 > > > aid 0x030b (NetAccessType) > > > uint 0xfffe > > > aid 0x030c (MaxNetAccessRate) > > > uint 0x0 > > > > > > Then for the actual connection attempt I see this: > > > > ACL data: handle 11 flags 0x02 dlen 12 > > > > > > L2CAP(s): Connect req: psm 15 scid 0x0041 < ACL data: handle 11 > > > flags 0x00 dlen 16 > > > L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0041 result 1 status 2 > > > Connection pending - Authorization pending < ACL data: handle > > > 11 flags 0x00 dlen 16 > > > L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0041 result 0 status 0 > > > Connection successful > > > > > > And after this my connection is established and all is well. For > > > the GN network this is what I am seeing beginning with the > > > information about the GN. > > > > > > record #6 > > > aid 0x0000 (SrvRecHndl) > > > uint 0x10007 > > > aid 0x0001 (SrvClassIDList) > > > < uuid-16 0x1117 (GN) > > > > aid 0x0004 (ProtocolDescList) > > > < < uuid-16 0x0100 (L2CAP) uint 0xf > < > > > uuid-16 0x000f (BNEP) uint 0x100 < uint 0x800 uint > > > 0x806 > > > > > > aid 0x0005 (BrwGrpList) > > > < uuid-16 0x1002 (PubBrwsGrp) > > > > aid 0x0006 (LangBaseAttrIDList) > > > < uint 0x656e uint 0x6a uint 0x100 > > > > aid 0x0009 (BTProfileDescList) > > > < < uuid-16 0x1117 (GN) uint 0x100 > > > > > aid 0x0100 (SrvName) > > > str "Network service" > > > aid 0x0101 (SrvDesc) > > > str "Network service" > > > aid 0x030a (SecurityDescription) > > > uint 0x1 > > > > > > and when the connection is made I see this: > > > > ACL data: handle 11 flags 0x02 dlen 12 > > > > > > L2CAP(s): Connect req: psm 15 scid 0x0041 < ACL data: handle 11 > > > flags 0x00 dlen 16 > > > L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0041 result 1 status 2 > > > Connection pending - Authorization pending < ACL data: handle > > > 11 flags 0x00 dlen 16 > > > L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0041 result 3 status 0 > > > Connection refused - security block > > > > This looks like connection was rejected due to missing authorization. > > Are you sure you have default agent registered in your system? > > > > Providing also 'bluetoothd -n -d' logs would put some light on this issue. > > > > -- > > pozdrawiam > > Szymon Janc > > > Hello, > Thank you for the reply. Sorry for my inexperience but I believe I have the > default agent registered because the NAP service works perfectly. It is only > the GN that does not work. Would the agent be different and if so how > would I verify? I was elected to develop various proof of concepts for PAN > over Bluetooth and Bluetooth Smart more for my networking/Sys- > Admin/development background and not really for any Bluetooth > experience. > This is what is outputted from the 'bluetooth -n -d' when I register the GN > service: > > > bluetoothd[3307]: src/adapter.c:adapter_service_add() /org/bluez/hci0 > bluetoothd[3307]: src/sdpd-service.c:add_record_to_server() Adding > record with handle 0x10009 > bluetoothd[3307]: src/sdpd-service.c:add_record_to_server() Record > pattern UUID 0000000f-0000-1000-8000-00805f9 > bluetoothd[3307]: src/sdpd-service.c:add_record_to_server() Record > pattern UUID 00000100-0000-1000-8000-00805f9 > bluetoothd[3307]: src/sdpd-service.c:add_record_to_server() Record > pattern UUID 00001002-0000-1000-8000-00805f9 > bluetoothd[3307]: src/sdpd-service.c:add_record_to_server() Record > pattern UUID 00001117-0000-1000-8000-00805f9 > bluetoothd[3307]: src/adapter.c:adapter_service_insert() /org/bluez/hci0 > bluetoothd[3307]: src/adapter.c:add_uuid() sending add uuid command > for index 0 > bluetoothd[3307]: profiles/network/server.c:register_server_record() got > record id 0x10009 > bluetoothd[3307]: src/adapter.c:dev_class_changed_callback() Class: > 0x2e0000 > > This is what I see when I attempt to connect to the service: > > bluetoothd[3307]: src/adapter.c:connected_callback() hci0 device > 5C:F3:70:XX:XX:XX connected eir_len 13 > bluetoothd[3307]: src/adapter.c:new_link_key_callback() hci0 new key for > 5C:F3:70:XX:XX:XX type 4 pin_len 0 store_hint 1 > bluetoothd[3307]: src/device.c:device_set_bonded() > bluetoothd[3307]: src/device.c:device_bonding_complete() bonding (nil) > status 0x00 > bluetoothd[3307]: src/adapter.c:resume_discovery() > bluetoothd[3307]: src/adapter.c:dev_disconnected() Device > 5C:F3:70:XX:XX:XX disconnected, reason 3 > bluetoothd[3307]: src/adapter.c:adapter_remove_connection() > bluetoothd[3307]: plugins/policy.c:disconnect_cb() reason 3 > bluetoothd[3307]: src/adapter.c:bonding_attempt_complete() hci0 > bdaddr 5C:F3:70:XX:XX:XX type 0 status 0xe > bluetoothd[3307]: src/device.c:device_bonding_complete() bonding (nil) > status 0x0e > bluetoothd[3307]: src/device.c:device_bonding_failed() status 14 > bluetoothd[3307]: src/adapter.c:resume_discovery() > bluetoothd[3307]: src/adapter.c:connected_callback() hci0 device > 5C:F3:70:XX:XX:XX connected eir_len 13 > bluetoothd[3307]: profiles/network/server.c:confirm_event() BNEP: > incoming connect from 5C:F3:70:XX:XX:XX > bluetoothd[3307]: src/adapter.c:dev_disconnected() Device > 5C:F3:70:XX:XX:XX disconnected, reason 3 > bluetoothd[3307]: src/adapter.c:adapter_remove_connection() > bluetoothd[3307]: plugins/policy.c:disconnect_cb() reason 3 > bluetoothd[3307]: src/adapter.c:bonding_attempt_complete() hci0 > bdaddr 5C:F3:70:XX:XX:XX type 0 status 0xe > bluetoothd[3307]: src/device.c:device_bonding_complete() bonding (nil) > status 0x0e > bluetoothd[3307]: src/device.c:device_bonding_failed() status 14 > bluetoothd[3307]: src/adapter.c:resume_discovery() > > On the fourth line it looks like the bonding is coming back as nil which can't be > good. Is that the issue and what would cause that (sorry for the very basic > questions)? > > Thanks for the help, > > Jon This morning I decided to run the bluetoothd in debug mode as Szymon recommended and analyze output for the both the NAP (service that works) and GN (service that does not work) services. I also decided that I would break it down into three parts: Setting up the service, Pairing and Connecting to the service. Here are my results: Setting up the services: The output from setting up the services are almost identical. The only difference is these lines: NAP service bluetoothd[1964]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001116-0000-1000-8000-00805f9 GN service bluetoothd[1981]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001117-0000-1000-8000-00805f9 Here are the full results: NAP service bluetoothd[1964]: src/adapter.c:adapter_service_add() /org/bluez/hci0 bluetoothd[1964]: src/sdpd-service.c:add_record_to_server() Adding record with handle 0x10009 bluetoothd[1964]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 0000000f-0000-1000-8000-00805f9 bluetoothd[1964]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00000100-0000-1000-8000-00805f9 bluetoothd[1964]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001002-0000-1000-8000-00805f9 bluetoothd[1964]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001116-0000-1000-8000-00805f9 bluetoothd[1964]: src/adapter.c:adapter_service_insert() /org/bluez/hci0 bluetoothd[1964]: src/adapter.c:add_uuid() sending add uuid command for index 0 bluetoothd[1964]: profiles/network/server.c:register_server_record() got record id 0x10009 bluetoothd[1964]: src/adapter.c:dev_class_changed_callback() Class: 0x2e0000 GN service bluetoothd[1981]: src/adapter.c:adapter_service_add() /org/bluez/hci0 bluetoothd[1981]: src/sdpd-service.c:add_record_to_server() Adding record with handle 0x10009 bluetoothd[1981]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 0000000f-0000-1000-8000-00805f9 bluetoothd[1981]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00000100-0000-1000-8000-00805f9 bluetoothd[1981]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001002-0000-1000-8000-00805f9 bluetoothd[1981]: src/sdpd-service.c:add_record_to_server() Record pattern UUID 00001117-0000-1000-8000-00805f9 bluetoothd[1981]: src/adapter.c:adapter_service_insert() /org/bluez/hci0 bluetoothd[1981]: src/adapter.c:add_uuid() sending add uuid command for index 0 bluetoothd[1981]: profiles/network/server.c:register_server_record() got record id 0x10009 bluetoothd[1981]: src/adapter.c:dev_class_changed_callback() Class: 0x2e0000 Pairing: These output from the pairing request, as expected is exactly the same. Here is the full output: NAP service: bluetoothd[1964]: src/adapter.c:connected_callback() hci0 device 5C:F3:70:66:43:58 connected eir_len 13 bluetoothd[1964]: src/adapter.c:new_link_key_callback() hci0 new key for 5C:F3:70:66:43:58 type 4 pin_len 0 store_hint 1 bluetoothd[1964]: src/device.c:device_set_bonded() bluetoothd[1964]: src/device.c:device_bonding_complete() bonding (nil) status 0x00 bluetoothd[1964]: src/adapter.c:resume_discovery() bluetoothd[1964]: src/adapter.c:dev_disconnected() Device 5C:F3:70:66:43:58 disconnected, reason 3 bluetoothd[1964]: src/adapter.c:adapter_remove_connection() bluetoothd[1964]: plugins/policy.c:disconnect_cb() reason 3 bluetoothd[1964]: src/adapter.c:bonding_attempt_complete() hci0 bdaddr 5C:F3:70:66:43:58 type 0 status 0xe bluetoothd[1964]: src/device.c:device_bonding_complete() bonding (nil) status 0x0e bluetoothd[1964]: src/device.c:device_bonding_failed() status 14 bluetoothd[1964]: src/adapter.c:resume_discovery() GN service: bluetoothd[1981]: src/adapter.c:connected_callback() hci0 device 5C:F3:70:66:43:58 connected eir_len 13 bluetoothd[1981]: src/adapter.c:new_link_key_callback() hci0 new key for 5C:F3:70:66:43:58 type 4 pin_len 0 store_hint 1 bluetoothd[1981]: src/device.c:device_set_bonded() bluetoothd[1981]: src/device.c:device_bonding_complete() bonding (nil) status 0x00 bluetoothd[1981]: src/adapter.c:resume_discovery() bluetoothd[1981]: src/adapter.c:dev_disconnected() Device 5C:F3:70:66:43:58 disconnected, reason 3 bluetoothd[1981]: src/adapter.c:adapter_remove_connection() bluetoothd[1981]: plugins/policy.c:disconnect_cb() reason 3 bluetoothd[1981]: src/adapter.c:bonding_attempt_complete() hci0 bdaddr 5C:F3:70:66:43:58 type 0 status 0xe bluetoothd[1981]: src/device.c:device_bonding_complete() bonding (nil) status 0x0e bluetoothd[1981]: src/device.c:device_bonding_failed() status 14 bluetoothd[1981]: src/adapter.c:resume_discovery() Connecting: The output from the connecting request, also as expected, is quite a bit different. The first two lines are the same but then they differ. The output from the NAP service indicates that the service is supported within Bluez (profiles/network/bnep.c:bnep_getsuppfeat() supported features: 0x1) while the GN service receives a disconnect (src/adapter.c:dev_disconnected() Device 5C:F3:70:66:43:58 disconnected, reason 3). Here is the full output: NAP service: bluetoothd[1964]: src/adapter.c:connected_callback() hci0 device 5C:F3:70:66:43:58 connected eir_len 13 bluetoothd[1964]: profiles/network/server.c:confirm_event() BNEP: incoming connect from 5C:F3:70:66:43:58 bluetoothd[1964]: profiles/network/bnep.c:bnep_getsuppfeat() supported features: 0x1 bluetoothd[1964]: bnep: bridge pan0: interface enx5cf37066433d added GN service: bluetoothd[1981]: src/adapter.c:connected_callback() hci0 device 5C:F3:70:66:43:58 connected eir_len 13 bluetoothd[1981]: profiles/network/server.c:confirm_event() BNEP: incoming connect from 5C:F3:70:66:43:58 bluetoothd[1981]: src/adapter.c:dev_disconnected() Device 5C:F3:70:66:43:58 disconnected, reason 3 bluetoothd[1981]: src/adapter.c:adapter_remove_connection() bluetoothd[1981]: plugins/policy.c:disconnect_cb() reason 3 bluetoothd[1981]: src/adapter.c:bonding_attempt_complete() hci0 bdaddr 5C:F3:70:66:43:58 type 0 status 0xe bluetoothd[1981]: src/device.c:device_bonding_complete() bonding (nil) status 0x0e bluetoothd[1981]: src/device.c:device_bonding_failed() status 14 bluetoothd[1981]: src/adapter.c:resume_discovery() Looking at this output it appears to me, please correct me if I am wrong, that Bluez 5.35 does not support the Group Network (GN) scenario within the PAN profile. I came to that conclusion because within the NAP scenario it reaches the bnep_getsuppfeat() method which I assume is the get supported feature while within the GN scenario it does not. If that is the case, should I file a bug? However if I am wrong, can someone tell me what is going wrong. Thanks for the help and any advice would be appreciated. Jon