All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jose Abreu <Jose.Abreu@synopsys.com>
To: netdev@vger.kernel.org
Cc: Jose Abreu <Jose.Abreu@synopsys.com>,
	"David S. Miller" <davem@davemloft.net>,
	Joao Pinto <Joao.Pinto@synopsys.com>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@st.com>
Subject: [PATCH net-next 7/9] net: stmmac: Integrate XGMAC into main driver flow
Date: Wed,  1 Aug 2018 13:10:35 +0100	[thread overview]
Message-ID: <39b57ee542fc20a1c457c12e6011dc239dda8725.1533125016.git.joabreu@synopsys.com> (raw)
In-Reply-To: <cover.1533125016.git.joabreu@synopsys.com>
In-Reply-To: <cover.1533125016.git.joabreu@synopsys.com>

Now that we have all the XGMAC related callbacks, lets start integrating
this IP block into main driver.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 55 ++++++++++++++++++-----
 1 file changed, 45 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d9e60cfd8a85..2c7a571140bb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -51,6 +51,7 @@
 #include <linux/reset.h>
 #include <linux/of_mdio.h>
 #include "dwmac1000.h"
+#include "dwxgmac2.h"
 #include "hwif.h"
 
 #define STMMAC_ALIGN(x)	L1_CACHE_ALIGN(x)
@@ -262,6 +263,21 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv)
 		else
 			priv->clk_csr = 0;
 	}
+
+	if (priv->plat->has_xgmac) {
+		if (clk_rate > 400000000)
+			priv->clk_csr = 0x5;
+		else if (clk_rate > 350000000)
+			priv->clk_csr = 0x4;
+		else if (clk_rate > 300000000)
+			priv->clk_csr = 0x3;
+		else if (clk_rate > 250000000)
+			priv->clk_csr = 0x2;
+		else if (clk_rate > 150000000)
+			priv->clk_csr = 0x1;
+		else
+			priv->clk_csr = 0x0;
+	}
 }
 
 static void print_pkt(unsigned char *buf, int len)
@@ -498,7 +514,7 @@ static void stmmac_get_rx_hwtstamp(struct stmmac_priv *priv, struct dma_desc *p,
 	if (!priv->hwts_rx_en)
 		return;
 	/* For GMAC4, the valid timestamp is from CTX next desc. */
-	if (priv->plat->has_gmac4)
+	if (priv->plat->has_gmac4 || priv->plat->has_xgmac)
 		desc = np;
 
 	/* Check if timestamp is available */
@@ -540,6 +556,9 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
 	u32 ts_event_en = 0;
 	u32 value = 0;
 	u32 sec_inc;
+	bool xmac;
+
+	xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
 
 	if (!(priv->dma_cap.time_stamp || priv->adv_ts)) {
 		netdev_alert(priv->dev, "No support for HW time stamping\n");
@@ -575,7 +594,7 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
 			/* PTP v1, UDP, any kind of event packet */
 			config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT;
 			/* take time stamp for all event messages */
-			if (priv->plat->has_gmac4)
+			if (xmac)
 				snap_type_sel = PTP_GMAC4_TCR_SNAPTYPSEL_1;
 			else
 				snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
@@ -610,7 +629,7 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
 			config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT;
 			ptp_v2 = PTP_TCR_TSVER2ENA;
 			/* take time stamp for all event messages */
-			if (priv->plat->has_gmac4)
+			if (xmac)
 				snap_type_sel = PTP_GMAC4_TCR_SNAPTYPSEL_1;
 			else
 				snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
@@ -647,7 +666,7 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
 			config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
 			ptp_v2 = PTP_TCR_TSVER2ENA;
 			/* take time stamp for all event messages */
-			if (priv->plat->has_gmac4)
+			if (xmac)
 				snap_type_sel = PTP_GMAC4_TCR_SNAPTYPSEL_1;
 			else
 				snap_type_sel = PTP_TCR_SNAPTYPSEL_1;
@@ -718,7 +737,7 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
 		/* program Sub Second Increment reg */
 		stmmac_config_sub_second_increment(priv,
 				priv->ptpaddr, priv->plat->clk_ptp_rate,
-				priv->plat->has_gmac4, &sec_inc);
+				xmac, &sec_inc);
 		temp = div_u64(1000000000ULL, sec_inc);
 
 		/* Store sub second increment and flags for later use */
@@ -755,12 +774,14 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr)
  */
 static int stmmac_init_ptp(struct stmmac_priv *priv)
 {
+	bool xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
+
 	if (!(priv->dma_cap.time_stamp || priv->dma_cap.atime_stamp))
 		return -EOPNOTSUPP;
 
 	priv->adv_ts = 0;
-	/* Check if adv_ts can be enabled for dwmac 4.x core */
-	if (priv->plat->has_gmac4 && priv->dma_cap.atime_stamp)
+	/* Check if adv_ts can be enabled for dwmac 4.x / xgmac core */
+	if (xmac && priv->dma_cap.atime_stamp)
 		priv->adv_ts = 1;
 	/* Dwmac 3.x core with extend_desc can support adv_ts */
 	else if (priv->extend_desc && priv->dma_cap.atime_stamp)
@@ -842,6 +863,12 @@ static void stmmac_adjust_link(struct net_device *dev)
 			new_state = true;
 			ctrl &= ~priv->hw->link.speed_mask;
 			switch (phydev->speed) {
+			case SPEED_10000:
+				ctrl |= priv->hw->link.speed10000;
+				break;
+			case SPEED_2500:
+				ctrl |= priv->hw->link.speed2500;
+				break;
 			case SPEED_1000:
 				ctrl |= priv->hw->link.speed1000;
 				break;
@@ -3305,6 +3332,9 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 	int coe = priv->hw->rx_csum;
 	unsigned int next_entry;
 	unsigned int count = 0;
+	bool xmac;
+
+	xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
 
 	if (netif_msg_rx_status(priv)) {
 		void *rx_head;
@@ -3406,7 +3436,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit, u32 queue)
 			 * in case of GMAC4 because it needs
 			 * to refill the used descriptors, always.
 			 */
-			if (unlikely(!priv->plat->has_gmac4 &&
+			if (unlikely(!xmac &&
 				     ((frame_len < priv->rx_copybreak) ||
 				     stmmac_rx_threshold_count(rx_q)))) {
 				skb = netdev_alloc_skb_ip_align(priv->dev,
@@ -3642,7 +3672,9 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
 	u32 tx_cnt = priv->plat->tx_queues_to_use;
 	u32 queues_count;
 	u32 queue;
+	bool xmac;
 
+	xmac = priv->plat->has_gmac4 || priv->plat->has_xgmac;
 	queues_count = (rx_cnt > tx_cnt) ? rx_cnt : tx_cnt;
 
 	if (priv->irq_wake)
@@ -3661,7 +3693,7 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
 		return IRQ_HANDLED;
 
 	/* To handle GMAC own interrupts */
-	if ((priv->plat->has_gmac) || (priv->plat->has_gmac4)) {
+	if ((priv->plat->has_gmac) || xmac) {
 		int status = stmmac_host_irq_status(priv, priv->hw, &priv->xstats);
 		int mtl_status;
 
@@ -4269,6 +4301,8 @@ int stmmac_dvr_probe(struct device *device,
 	ndev->min_mtu = ETH_ZLEN - ETH_HLEN;
 	if ((priv->plat->enh_desc) || (priv->synopsys_id >= DWMAC_CORE_4_00))
 		ndev->max_mtu = JUMBO_LEN;
+	else if (priv->plat->has_xgmac)
+		ndev->max_mtu = XGMAC_JUMBO_LEN;
 	else
 		ndev->max_mtu = SKB_MAX_HEAD(NET_SKB_PAD + NET_IP_ALIGN);
 	/* Will not overwrite ndev->max_mtu if plat->maxmtu > ndev->max_mtu
@@ -4290,7 +4324,8 @@ int stmmac_dvr_probe(struct device *device,
 	 * has to be disable and this can be done by passing the
 	 * riwt_off field from the platform.
 	 */
-	if ((priv->synopsys_id >= DWMAC_CORE_3_50) && (!priv->plat->riwt_off)) {
+	if (((priv->synopsys_id >= DWMAC_CORE_3_50) ||
+	    (priv->plat->has_xgmac)) && (!priv->plat->riwt_off)) {
 		priv->use_riwt = 1;
 		dev_info(priv->device,
 			 "Enable RX Mitigation via HW Watchdog Timer\n");
-- 
2.7.4

  parent reply	other threads:[~2018-08-01 13:56 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-01 12:10 [PATCH net-next 0/9] Add 10GbE support in stmmac using XGMAC2 Jose Abreu
2018-08-01 12:10 ` [PATCH net-next 1/9] net: stmmac: Add XGMAC 2.10 HWIF entry Jose Abreu
2018-08-01 12:10 ` [PATCH net-next 2/9] net: stmmac: Add MAC related callbacks for XGMAC2 Jose Abreu
2018-08-01 12:10 ` [PATCH net-next 3/9] net: stmmac: Add DMA " Jose Abreu
2018-08-01 12:10 ` [PATCH net-next 4/9] net: stmmac: Add descriptor " Jose Abreu
2018-08-01 12:10 ` [PATCH net-next 5/9] net: stmmac: Add MDIO related functions " Jose Abreu
2018-08-01 15:08   ` Andrew Lunn
2018-08-02  8:36     ` Jose Abreu
2018-08-02 14:11       ` Andrew Lunn
2018-08-01 12:10 ` [PATCH net-next 6/9] net: stmmac: Add PTP support " Jose Abreu
2018-08-01 12:10 ` Jose Abreu [this message]
2018-08-01 15:23   ` [PATCH net-next 7/9] net: stmmac: Integrate XGMAC into main driver flow Andrew Lunn
2018-08-02  8:26     ` Jose Abreu
2018-08-02 14:03       ` Andrew Lunn
2018-08-02 14:15         ` Jose Abreu
2018-08-02 14:36           ` Andrew Lunn
2018-08-02 15:38             ` Jose Abreu
2018-08-02 16:00               ` Andrew Lunn
2018-08-01 12:10 ` [PATCH net-next 8/9] net: stmmac: Add the bindings parsing for XGMAC2 Jose Abreu
2018-08-01 12:10 ` [PATCH net-next 9/9] bindings: net: stmmac: Add the bindings documentation " Jose Abreu
2018-08-01 14:57   ` Sergei Shtylyov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=39b57ee542fc20a1c457c12e6011dc239dda8725.1533125016.git.joabreu@synopsys.com \
    --to=jose.abreu@synopsys.com \
    --cc=Joao.Pinto@synopsys.com \
    --cc=alexandre.torgue@st.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.