All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vince <fuzzy77@free.fr>
To: linux-kernel@vger.kernel.org
Subject: [Oops report] ppp / 2.6.0-test1-mm1
Date: Wed, 16 Jul 2003 18:07:12 +0200	[thread overview]
Message-ID: <3F157830.8030402@free.fr> (raw)

[-- Attachment #1: Type: text/plain, Size: 1778 bytes --]

Hi,

I get the following oops when launching ppp on 2.6.0-test1-mm1 
(2.5.75-mm1 was fine, I've not yet tested 2.6.0-test1 itself but can do 
it if necessary). 100% reproductible.
I'm using ppp with pppoatm and the kernel speedtouch driver, but 
previous versions of 2.5 were working fine with the same configuration 
so far, so probably a recent change is to blame...

dmesg and lsmod output are attached. Please let me now if any further 
information/test is needed.

Vincent

---------------------------------------------------------------------
Unable to handle kernel NULL pointer dereference at virtual address 00000026
  printing eip:
c0274d4b
*pde = 00000000
Oops: 0000 [#1]
PREEMPT
CPU:    0
EIP:    0060:[<c0274d4b>]    Not tainted VLI
EFLAGS: 00210206
EIP is at __vcc_connect+0x2b/0x230
eax: 0000000a   ebx: 00000000   ecx: 00000023   edx: c02ed11c
esi: ce241600   edi: 00000000   ebp: 00000023   esp: c857fe60
ds: 007b   es: 007b   ss: 0068
Process pppd (pid: 1198, threadinfo=c857e000 task=c8a17880)
Stack: c1149ad8 c0115e4d c857e000 00000000 cffcf1c0 ce241600 c8ef4080 
c0275007
        ce241600 00000000 00000008 00000023 00200246 00081600 c857e000 
cffcf1c0
        c857fee8 c8ef4080 c0272202 c8ef4080 00000000 00000008 00000023 
ffffffb3
Call Trace:
  [<c0115e4d>] pte_alloc_one+0x3d/0x50
  [<c0275007>] vcc_connect+0xb7/0x1f0
  [<c0272202>] pvc_bind+0xb2/0x150
  [<c0217595>] sys_connect+0x85/0xc0
  [<c027234f>] pvc_setsockopt+0x9f/0xf0
  [<c0217a48>] sys_setsockopt+0x78/0xc0
  [<c021813d>] sys_socketcall+0xcd/0x2a0
  [<c0109107>] syscall_call+0x7/0xb
 

Code: 83 ec 1c 8b 44 24 28 89 74 24 10 89 7c 24 14 89 6c 24 18 89 5c 24 
0c 8b 74 24 20 8b 7c 24 24 8b 6c 24 2c 83 c0 02 83 f8 01 76 0e <0f> be 
4f 26 8b 44 24 28 d3 f8 85 c0 75 14 8d 45 02 83 f8 01 76

[-- Attachment #2: oops.2.6.0-test1-mm1.dmesg --]
[-- Type: text/plain, Size: 10166 bytes --]

Linux version 2.6.0-test1-mm1 (root@diablo) (gcc version 3.3.1 20030626 (Debian prerelease)) #1 Wed Jul 16 11:48:24 CEST 2003
Video mode to be used for restore is ffff
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
 BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
 BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 61424 pages, LIFO batch:14
  HighMem zone: 0 pages, LIFO batch:1
Building zonelist for node : 0
Kernel command line: root=/dev/hda1 
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1540.100 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3031.04 BogoMIPS
Memory: 256380k/262080k available (1507k kernel code, 4972k reserved, 589k data, 104k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU:     After generic, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 1800+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v2.0 (20020519)
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec pool[0]:   1 bvecs: 256 entries (12 bytes)
biovec pool[1]:   4 bvecs: 256 entries (48 bytes)
biovec pool[2]:  16 bvecs: 256 entries (192 bytes)
biovec pool[3]:  64 bvecs: 256 entries (768 bytes)
biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
Linux Plug and Play Support v0.96 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f7440
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x616b, dseg 0xf0000
PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/3147] at 0000:00:11.0
PCI: IRQ 0 for device 0000:00:11.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Hardcoded IRQ 14 for device 0000:00:11.1
pty: 256 Unix98 ptys configured
Machine check exception polling timer started.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Enabling SEP on CPU 0
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Initializing Cryptographic API
Real Time Clock Driver v1.11
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 Fast Ethernet at 0xd0800f00, 00:20:ed:3d:28:06, IRQ 10
eth0:  Identified 8139 chip type 'RTL-8139C'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
PCI: Hardcoded IRQ 14 for device 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L080AVVA07-0, ATA DISK drive
anticipatory scheduling elevator
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: IBM-DTLA-307045, ATA DISK drive
hdd: LITE-ON LTR-32123S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: host protected area => 1
hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=159560/16/63, UDMA(100)
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
hdc: max request size: 128KiB
hdc: host protected area => 1
hdc: 90069840 sectors (46116 MB) w/1916KiB Cache, CHS=89355/16/63, UDMA(100)
 /dev/ide/host0/bus1/target0/lun0: p1
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 1984kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
mice: PS/2 mouse device common for all mice
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
serio: i8042 AUX port at 0x60,0x64 irq 12
input: AT Set 2 keyboard on isa0060/serio0
serio: i8042 KBD port at 0x60,0x64 irq 1
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda1) for (hda1)
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 104k freed
Adding 265064k swap on /dev/hda2.  Priority:-1 extents:1
registering 0-004c
NTFS driver 2.1.4 [Flags: R/W MODULE].
NTFS volume version 3.0.
found reiserfs format "3.6" with standard journal
Reiserfs journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda4) for (hda4)
Using r5 hash to sort names
cdrom: open failed.
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ehci_hcd 0000:00:14.2: VIA Technologies, In USB 2.0
ehci_hcd 0000:00:14.2: irq 10, pci mem d0a0fe00
ehci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:14.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jun-13
hub 1-0:0: USB hub found
hub 1-0:0: 4 ports detected
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci-hcd 0000:00:11.2: VIA Technologies, In USB
uhci-hcd 0000:00:11.2: irq 10, io base 0000e800
uhci-hcd 0000:00:11.2: new USB bus registered, assigned bus number 2
hub 2-0:0: USB hub found
hub 2-0:0: 2 ports detected
uhci-hcd 0000:00:11.3: VIA Technologies, In USB (#2)
uhci-hcd 0000:00:11.3: irq 10, io base 0000e400
uhci-hcd 0000:00:11.3: new USB bus registered, assigned bus number 3
hub 3-0:0: USB hub found
hub 3-0:0: 2 ports detected
uhci-hcd 0000:00:14.0: VIA Technologies, In USB (#3)
uhci-hcd 0000:00:14.0: irq 10, io base 0000dc00
uhci-hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
hub 4-0:0: USB hub found
hub 4-0:0: 2 ports detected
uhci-hcd 0000:00:14.1: VIA Technologies, In USB (#4)
uhci-hcd 0000:00:14.1: irq 10, io base 0000d800
uhci-hcd 0000:00:14.1: new USB bus registered, assigned bus number 5
hub 5-0:0: USB hub found
hub 5-0:0: 2 ports detected
hub 3-0:0: debounce: port 1: delay 100ms stable 4 status 0x101
hub 3-0:0: new USB device on port 1, assigned address 2
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
blk: queue c033a51c, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c033ae5c, I/O limit 4095Mb (mask 0xffffffff)
sensors: numerical sysctl 7 2 1 is obsolete.
sensord: numerical sysctl 7 2 1 is obsolete.
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (2047 buckets, 16376 max) - 300 bytes per conntrack
Linux video capture interface: v1.00
bttv: driver version 0.9.4 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Host bridge is VIA Technologies, In VT8366/A/7 [Apollo K
bttv: Bt8xx card found (0).
bttv0: Bt848 (rev 18) at 0000:00:0c.0, irq: 10, latency: 32, mmio: 0xdddff000
bttv0: using: BT848A(Lifeview FlyVideo 98/ M) [card=27,insmod option]
bttv0: gpio config override: mask=0xffff, mux=0x1000,0x800,0x800,0x800,0x800
bttv0: FlyVideo Radio=no  RemoteControl=no  Tuner=2 gpio=0x10ffff
bttv0: FlyVideo  LR90=no  tda9821/tda9820=no  capture_only=no 
bttv0: using tuner=3
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tuner: chip found @ 0xc0
tuner: type set to 3 (Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF))
registering 1-0060
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 .. ok
cdrom: This disc doesn't have any tracks I recognize!
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
Unable to handle kernel NULL pointer dereference at virtual address 00000026
 printing eip:
c0274d4b
*pde = 00000000
Oops: 0000 [#1]
PREEMPT 
CPU:    0
EIP:    0060:[<c0274d4b>]    Not tainted VLI
EFLAGS: 00210206
EIP is at __vcc_connect+0x2b/0x230
eax: 0000000a   ebx: 00000000   ecx: 00000023   edx: c02ed11c
esi: ce241600   edi: 00000000   ebp: 00000023   esp: c857fe60
ds: 007b   es: 007b   ss: 0068
Process pppd (pid: 1198, threadinfo=c857e000 task=c8a17880)
Stack: c1149ad8 c0115e4d c857e000 00000000 cffcf1c0 ce241600 c8ef4080 c0275007 
       ce241600 00000000 00000008 00000023 00200246 00081600 c857e000 cffcf1c0 
       c857fee8 c8ef4080 c0272202 c8ef4080 00000000 00000008 00000023 ffffffb3 
Call Trace:
 [<c0115e4d>] pte_alloc_one+0x3d/0x50
 [<c0275007>] vcc_connect+0xb7/0x1f0
 [<c0272202>] pvc_bind+0xb2/0x150
 [<c0217595>] sys_connect+0x85/0xc0
 [<c027234f>] pvc_setsockopt+0x9f/0xf0
 [<c0217a48>] sys_setsockopt+0x78/0xc0
 [<c021813d>] sys_socketcall+0xcd/0x2a0
 [<c0109107>] syscall_call+0x7/0xb

Code: 83 ec 1c 8b 44 24 28 89 74 24 10 89 7c 24 14 89 6c 24 18 89 5c 24 0c 8b 74 24 20 8b 7c 24 24 8b 6c 24 2c 83 c0 02 83 f8 01 76 0e <0f> be 4f 26 8b 44 24 28 d3 f8 85 c0 75 14 8d 45 02 83 f8 01 76 
 

[-- Attachment #3: oops.2.6.0-test1-mm1.modules --]
[-- Type: text/plain, Size: 2418 bytes --]

Module                  Size  Used by
pppoatm                 4864  0 
ppp_generic            26320  1 pppoatm
slhc                    6464  1 ppp_generic
tuner                  14412  0 
bttv                  100868  0 
video_buf              16644  1 bttv
i2c_algo_bit            9288  1 bttv
v4l2_common             3840  1 bttv
videodev                8672  1 bttv
ip_conntrack_ftp       70932  0 
ipt_MASQUERADE          2752  2 
iptable_mangle          2048  0 
iptable_nat            19756  2 ipt_MASQUERADE
ipt_REJECT              4800  8 
ipt_limit               1792  29 
ipt_state               1344  4 
ip_conntrack           24944  4 ip_conntrack_ftp,ipt_MASQUERADE,iptable_nat,ipt_state
ipt_LOG                 4800  15 
ipt_ULOG                5608  12 
iptable_filter          2112  1 
ip_tables              15488  9 ipt_MASQUERADE,iptable_mangle,iptable_nat,ipt_REJECT,ipt_limit,ipt_state,ipt_LOG,ipt_ULOG,iptable_filter
af_packet              16840  2 
snd_seq_midi            6496  0 
snd_seq_oss            32000  0 
snd_seq_midi_event      5888  2 snd_seq_midi,snd_seq_oss
snd_seq                51344  5 snd_seq_midi,snd_seq_oss,snd_seq_midi_event
snd_pcm_oss            48548  0 
snd_mixer_oss          16768  2 snd_pcm_oss
snd_ens1371            19556  1 
snd_rawmidi            20256  2 snd_seq_midi,snd_ens1371
snd_seq_device          6536  4 snd_seq_midi,snd_seq_oss,snd_seq,snd_rawmidi
snd_pcm                85540  2 snd_pcm_oss,snd_ens1371
snd_page_alloc          7812  1 snd_pcm
snd_timer              21636  2 snd_seq,snd_pcm
snd_ac97_codec         48132  1 snd_ens1371
snd                    43428  12 snd_seq_midi,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_ens1371,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer,snd_ac97_codec
soundcore               7168  3 bttv,snd
uhci_hcd               29264  0 
ehci_hcd               21956  0 
usbcore                97116  4 uhci_hcd,ehci_hcd
isofs                  32120  0 
zlib_inflate           21184  1 isofs
nls_cp437               5376  1 
vfat                   13120  1 
fat                    42560  1 vfat
nls_iso8859_1           3712  2 
ntfs                   96684  1 
it87                   21704  0 
adm1021                11080  0 
i2c_sensor              2432  2 it87,adm1021
i2c_viapro              5836  0 
i2c_core               20168  7 tuner,bttv,i2c_algo_bit,it87,adm1021,i2c_sensor,i2c_viapro

             reply	other threads:[~2003-07-16 15:49 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-07-16 16:07 Vince [this message]
2003-07-16 20:03 ` Re:[Oops report] (ppp/pppoatm) 2.6.0-test1 Vince
2003-07-16 21:05   ` [Oops report] (ppp/pppoatm)... explanation found ! Vince
2003-07-16 21:17     ` Duncan Sands
2003-07-16 21:45       ` Vince

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3F157830.8030402@free.fr \
    --to=fuzzy77@free.fr \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.