* 2.6.0-test1 Cannot login in X or console
@ 2003-07-19 3:07 Jonathan Bastien-Filiatrault
[not found] ` <3F195E5D.50409@maine.rr.com>
0 siblings, 1 reply; 7+ messages in thread
From: Jonathan Bastien-Filiatrault @ 2003-07-19 3:07 UTC (permalink / raw)
To: Linux Kernel
I have succesfully compiled and booted the 2.6.0-test1 kernel. After i
enter my username and password succesfuly the login window simply stays
there:
Login: user <enter>
Password: xxxx<enter>
<freezes>
Same thing with gdm. I do not have this problem with 2.4.21+swsup+preempt.
There is no error written in the system log.
Is it possible that PAM + 2.6.0-test1 results in this problem ?
The single runlevel works fine.(booted with single as kernel arg)
I am running gentoo.
Any insight appreciated.
Joe
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.0-test1 Cannot login in X or console
[not found] ` <3F195E5D.50409@maine.rr.com>
@ 2003-07-19 17:42 ` Jonathan Bastien-Filiatrault
2003-07-19 17:45 ` Jonathan Bastien-Filiatrault
1 sibling, 0 replies; 7+ messages in thread
From: Jonathan Bastien-Filiatrault @ 2003-07-19 17:42 UTC (permalink / raw)
To: David B. Stevens; +Cc: Linux Kernel
[-- Attachment #1: Type: text/plain, Size: 1480 bytes --]
Included is my config file, btw, it is not just the console that blocks,
it is the whole auth. system, which works fine with 2.4.
> Hi Joe,
>
> How about a clue as to what your config looks like for the 2.6.0-test1
> kernel and such. The area surrounding input and console support has
> changed quite a bit from 2.4.
>
> I'm running 2.6.0-test1-ac2, X, kdm, etc and it works just fine, well
> one of these days I'll get the alsa config up to snuff. But till then
> as long as I can watch my TV in a corner of the screen with sound I'm
> happy. The midi stuff can wait :).
>
> Cheers,
> Dave
>
>
> Jonathan Bastien-Filiatrault wrote:
>
>> I have succesfully compiled and booted the 2.6.0-test1 kernel. After
>> i enter my username and password succesfuly the login window simply
>> stays there:
>>
>> Login: user <enter>
>> Password: xxxx<enter>
>> <freezes>
>>
>> Same thing with gdm. I do not have this problem with
>> 2.4.21+swsup+preempt.
>> There is no error written in the system log.
>> Is it possible that PAM + 2.6.0-test1 results in this problem ?
>> The single runlevel works fine.(booted with single as kernel arg)
>> I am running gentoo.
>>
>> Any insight appreciated.
>>
>> Joe
>>
>> -
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-kernel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
>>
>
>
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 4854 bytes --]
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_EXPERIMENTAL=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSCTL=y
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_KMOD=y
CONFIG_X86_PC=y
CONFIG_MK7=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_PM=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
CONFIG_PNP_NAMES=y
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_LBD=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETFILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IPV6_SCTP__=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_E100=y
CONFIG_8139TOO=y
# Token Ring devices (depends on LLC=y)
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_HW_RANDOM=y
CONFIG_NVRAM=y
CONFIG_RTC=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_UDF_FS=y
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SMB_FS=y
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_UTF8=y
CONFIG_FB=y
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_AUDIO=y
CONFIG_USB_MIDI=y
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_SCANNER=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_X86_BIOS_REBOOT=y
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.0-test1 Cannot login in X or console
[not found] ` <3F195E5D.50409@maine.rr.com>
2003-07-19 17:42 ` Jonathan Bastien-Filiatrault
@ 2003-07-19 17:45 ` Jonathan Bastien-Filiatrault
[not found] ` <3F19B65A.6010606@maine.rr.com>
1 sibling, 1 reply; 7+ messages in thread
From: Jonathan Bastien-Filiatrault @ 2003-07-19 17:45 UTC (permalink / raw)
To: David B. Stevens; +Cc: Linux Kernel
[-- Attachment #1: Type: text/plain, Size: 1481 bytes --]
Included is my config file, btw, it is not just the console that blocks,
it is the whole auth. system, which works fine with 2.4.
> Hi Joe,
>
> How about a clue as to what your config looks like for the 2.6.0-test1
> kernel and such. The area surrounding input and console support has
> changed quite a bit from 2.4.
>
> I'm running 2.6.0-test1-ac2, X, kdm, etc and it works just fine, well
> one of these days I'll get the alsa config up to snuff. But till then
> as long as I can watch my TV in a corner of the screen with sound I'm
> happy. The midi stuff can wait :).
>
> Cheers,
> Dave
>
>
> Jonathan Bastien-Filiatrault wrote:
>
>> I have succesfully compiled and booted the 2.6.0-test1 kernel. After
>> i enter my username and password succesfuly the login window simply
>> stays there:
>>
>> Login: user <enter>
>> Password: xxxx<enter>
>> <freezes>
>>
>> Same thing with gdm. I do not have this problem with
>> 2.4.21+swsup+preempt.
>> There is no error written in the system log.
>> Is it possible that PAM + 2.6.0-test1 results in this problem ?
>> The single runlevel works fine.(booted with single as kernel arg)
>> I am running gentoo.
>>
>> Any insight appreciated.
>>
>> Joe
>>
>> -
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-kernel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/
>>
>
>
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 4855 bytes --]
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_EXPERIMENTAL=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSCTL=y
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_KMOD=y
CONFIG_X86_PC=y
CONFIG_MK7=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_MICROCODE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_PM=y
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
CONFIG_PNP_NAMES=y
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_LBD=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETFILTER=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_NAT_LOCAL=y
CONFIG_IPV6_SCTP__=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_E100=y
CONFIG_8139TOO=y
# Token Ring devices (depends on LLC=y)
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_HW_RANDOM=y
CONFIG_NVRAM=y
CONFIG_RTC=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_UDF_FS=y
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
CONFIG_DEVPTS_FS=y
CONFIG_DEVPTS_FS_XATTR=y
CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SMB_FS=y
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_UTF8=y
CONFIG_FB=y
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_AUDIO=y
CONFIG_USB_MIDI=y
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_SCANNER=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_X86_BIOS_REBOOT=y
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.0-test1 Cannot login in X or console
[not found] ` <3F19B65A.6010606@maine.rr.com>
@ 2003-07-20 5:10 ` Jonathan Bastien-Filiatrault
[not found] ` <3F1A5123.2080101@portrix.net>
0 siblings, 1 reply; 7+ messages in thread
From: Jonathan Bastien-Filiatrault @ 2003-07-20 5:10 UTC (permalink / raw)
To: David B. Stevens; +Cc: Linux Kernel
David B. Stevens wrote:
> Hi,
>
> I see you have the debug otions turned on so how about posting a
> Alt+SysRq+T at the time of the lockup if possible.
Show state shows nothing...
I tried to do tErm and i got a working login.
I have no Idea why this is happening.
This is a really big showstopper for me
>
> Cheers,
> Dave
In hope of getting 2.6 to work,
Joe
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.0-test1 Cannot login in X or console
[not found] ` <3F1A5123.2080101@portrix.net>
@ 2003-07-20 9:40 ` Jonathan Bastien-Filiatrault
2003-07-21 12:07 ` Martin Schlemmer
0 siblings, 1 reply; 7+ messages in thread
From: Jonathan Bastien-Filiatrault @ 2003-07-20 9:40 UTC (permalink / raw)
To: Jan Dittmer; +Cc: Linux Kernel
Jan Dittmer wrote:
> just mount devpts to /dev/pts, iff you have devfs enabled.
Already did that, i cannot even login on the 80x25 console.
>
> jan
>
This bug is preventing me from migrating !!!
Any ideas on the cause of this problem ?
Joe
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.0-test1 Cannot login in X or console
2003-07-20 9:40 ` Jonathan Bastien-Filiatrault
@ 2003-07-21 12:07 ` Martin Schlemmer
2003-07-22 12:48 ` Jonathan Bastien-Filiatrault
0 siblings, 1 reply; 7+ messages in thread
From: Martin Schlemmer @ 2003-07-21 12:07 UTC (permalink / raw)
To: Jonathan Bastien-Filiatrault; +Cc: Jan Dittmer, Linux Kernel
On Sun, 2003-07-20 at 11:40, Jonathan Bastien-Filiatrault wrote:
> Jan Dittmer wrote:
>
> > just mount devpts to /dev/pts, iff you have devfs enabled.
>
> Already did that, i cannot even login on the 80x25 console.
>
> >
> > jan
> >
> This bug is preventing me from migrating !!!
> Any ideas on the cause of this problem ?
>
Maybe try to boot 2.4 again, and see if you can get the
wiser by looking at the logs.
Regards,
--
Martin Schlemmer
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: 2.6.0-test1 Cannot login in X or console
2003-07-21 12:07 ` Martin Schlemmer
@ 2003-07-22 12:48 ` Jonathan Bastien-Filiatrault
0 siblings, 0 replies; 7+ messages in thread
From: Jonathan Bastien-Filiatrault @ 2003-07-22 12:48 UTC (permalink / raw)
To: Martin Schlemmer; +Cc: Linux Kernel
Martin Schlemmer wrote:
>On Sun, 2003-07-20 at 11:40, Jonathan Bastien-Filiatrault wrote:
>
>
>>Jan Dittmer wrote:
>>
>>
>>
>>>just mount devpts to /dev/pts, iff you have devfs enabled.
>>>
>>>
>>Already did that, i cannot even login on the 80x25 console.
>>
>>
>>
>>>jan
>>>
>>>
>>>
>>This bug is preventing me from migrating !!!
>>Any ideas on the cause of this problem ?
>>
>>
>>
>
>Maybe try to boot 2.4 again, and see if you can get the
>wiser by looking at the logs.
>
>
Nothing in the logs...the dreaful ilent error !!!
>
>Regards,
>
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2003-07-22 12:31 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2003-07-19 3:07 2.6.0-test1 Cannot login in X or console Jonathan Bastien-Filiatrault
[not found] ` <3F195E5D.50409@maine.rr.com>
2003-07-19 17:42 ` Jonathan Bastien-Filiatrault
2003-07-19 17:45 ` Jonathan Bastien-Filiatrault
[not found] ` <3F19B65A.6010606@maine.rr.com>
2003-07-20 5:10 ` Jonathan Bastien-Filiatrault
[not found] ` <3F1A5123.2080101@portrix.net>
2003-07-20 9:40 ` Jonathan Bastien-Filiatrault
2003-07-21 12:07 ` Martin Schlemmer
2003-07-22 12:48 ` Jonathan Bastien-Filiatrault
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.