From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S270647AbTGUUKU (ORCPT ); Mon, 21 Jul 2003 16:10:20 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S270674AbTGUUKU (ORCPT ); Mon, 21 Jul 2003 16:10:20 -0400 Received: from babyruth.hotpop.com ([204.57.55.14]:36057 "EHLO babyruth.hotpop.com") by vger.kernel.org with ESMTP id S270647AbTGUUKP (ORCPT ); Mon, 21 Jul 2003 16:10:15 -0400 Message-ID: <3F1C4AE8.9020906@hotpop.com> Date: Tue, 22 Jul 2003 01:49:52 +0530 From: dacin User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.0.1) Gecko/20020830 X-Accept-Language: en-us, en MIME-Version: 1.0 To: linux-kernel@vger.kernel.org, Andre Hedrick Subject: Interrupt lost { .... } Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-HotPOP: ----------------------------------------------- Sent By HotPOP.com FREE Email Get your FREE POP email at www.HotPOP.com ----------------------------------------------- Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Ello Freinds I am facing this problem with kernel 2.4.21 any suggestion. hdb: dma_timer_expiry: dma status == 0x64 hdb: lost interrupt hdb: dma_intr: bad DMA status (dma_stat=70) hdb: dma_intr: status=0x50 { DriveReady SeekComplete } lspci -v | grep IDE 00:1f.1 IDE interface: Intel Corp. 82801BA IDE U100 (rev 12) (prog-if 80 [Master]) hdparm -I /dev/hdb /dev/hdb: ATA device, with non-removable media Model Number: ST340823A Serial Number: 7EF2AWX7 Firmware Revision: 3.11 Standards: Supported: 5 4 3 2 Likely used: 6 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 78165360 device size with M = 1024*1024: 38166 MBytes device size with M = 1000*1000: 40020 MBytes (40 GB) Capabilities: LBA, IORDY(can be disabled) Queue depth: 1 Standby timer values: spec'd by Standard R/W multiple sector transfer: Max = 16 Current = 16 Recommended acoustic management value: 128, current value: 128 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=240ns IORDY flow control=120ns Commands/features: Enabled Supported: * READ BUFFER cmd * WRITE BUFFER cmd * Host Protected Area feature set * Look-ahead * Write cache * Power Management feature set Security Mode feature set * SMART feature set * Automatic Acoustic Management feature set SET MAX security extension * DOWNLOAD MICROCODE cmd Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count not supported: enhanced erase HW reset results: CBLID- above Vih Device num = 1 Checksum: correct