From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ronen Shitrit Date: Tue, 04 Nov 2003 20:41:45 +0200 Subject: [U-Boot-Users] help - loading linux kernel Message-ID: <3FA7F2E9.5080302@il.marvell.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi I have a U-Boot which is working just fine, and I'm trying to boot a kernel(ver 2.4) image with it , after I load the uImage to the DRAM by using the tftp as it is described in the README file, I'm doing bootm to the uImage location, I see that the code is getting to the kernel code , but there it get lost after we disable the MMU in head.S. (I know that the kernel version I have should be stable on my board cause with the DINK monitor I can load it just fine.) Are there any special changes I should make to the Kernel in order for it to be able to boot from the U-Boot?? If so, where can I find a good reference for it?? Thanks a lot -- Ronen Shitrit M.S.I.L D.N. Misgav 20184 Tel: +972-4-9951000 Fax: +972-4-9951001 Email: mailto: ronen.shitrit at il.marvell.com _____________________________________________________________ This message may contain confidential, proprietary or legally privileged information. The information is intended only for the use of the individual or entity named above. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by telephone, or by e-mail and delete the message from your computer.