From: "Raphaël Rigo" <raphael.rigo@inp-net.eu.org>
To: linux-kernel@vger.kernel.org
Subject: [OOPS?] 2.6-test11 : problem about irq18.
Date: Sun, 07 Dec 2003 18:48:33 +0100 [thread overview]
Message-ID: <3FD367F1.2060501@inp-net.eu.org> (raw)
[-- Attachment #1: Type: text/plain, Size: 4020 bytes --]
Hello,
I have a hard time making the 2.6-test11 to work correctly.
I constantly get messages about irq 18.
The kernel boots, linux works, but I get such messages every second :
Dec 7 18:28:24 pici kernel: irq 18: nobody cared!
Dec 7 18:28:24 pici kernel: Call Trace:
Dec 7 18:28:24 pici kernel: [<c010b08b>] __report_bad_irq+0x2b/0x90
Dec 7 18:28:24 pici kernel: [<c010b093>] __report_bad_irq+0x33/0x90
Dec 7 18:28:24 pici kernel: [<c010b168>] note_interrupt+0x50/0x78
Dec 7 18:28:24 pici kernel: [<c010b3f7>] do_IRQ+0xf7/0x180
Dec 7 18:28:24 pici kernel: [<c0105000>] _stext+0x0/0x60
Dec 7 18:28:24 pici kernel: [<c0109aec>] common_interrupt+0x18/0x20
Dec 7 18:28:24 pici kernel: [<c0105000>] _stext+0x0/0x60
Dec 7 18:28:24 pici kernel: [<c0107010>] default_idle+0x2c/0x34
Dec 7 18:28:24 pici kernel: [<c01070a6>] cpu_idle+0x3a/0x48
Dec 7 18:28:24 pici kernel: [<c0105057>] _stext+0x57/0x60
Dec 7 18:28:24 pici kernel: [<c03aa7f3>] start_kernel+0x16b/0x174
Dec 7 18:28:24 pici kernel:
Dec 7 18:28:24 pici kernel: handlers:
Dec 7 18:28:24 pici kernel: [<c0221364>] (ide_intr+0x0/0x1b4)
Dec 7 18:28:24 pici kernel: [<c0221364>] (ide_intr+0x0/0x1b4)
Dec 7 18:28:24 pici kernel: Disabling IRQ #18
I also had this :
Dec 7 18:27:45 pici kernel: hdg: dma_timer_expiry: dma status == 0x24
Dec 7 18:27:45 pici kernel: hdg: DMA interrupt recovery
Dec 7 18:27:45 pici kernel: hdg: lost interrupt
Dec 7 18:27:45 pici kernel: irq 18: nobody cared!
Dec 7 18:27:45 pici kernel: Call Trace:
Dec 7 18:27:45 pici kernel: [<c010b08b>] __report_bad_irq+0x2b/0x90
Dec 7 18:27:45 pici kernel: [<c010b093>] __report_bad_irq+0x33/0x90
Dec 7 18:27:45 pici kernel: [<c010b168>] note_interrupt+0x50/0x78
Dec 7 18:27:45 pici kernel: [<c010b3f7>] do_IRQ+0xf7/0x180
Dec 7 18:27:45 pici kernel: [<c0109aec>] common_interrupt+0x18/0x20
Dec 7 18:27:45 pici kernel: [<c01222b1>] do_softirq+0x61/0xd0
Dec 7 18:27:45 pici kernel: [<c010b466>] do_IRQ+0x166/0x180
Dec 7 18:27:45 pici kernel: [<c0109aec>] common_interrupt+0x18/0x20
Dec 7 18:27:45 pici kernel: [<c022007b>] ide_complete_pm_request+0x9b/0xe0
Dec 7 18:27:45 pici kernel: [<c021048f>] generic_unplug_device+0x73/0x8c
Dec 7 18:27:45 pici kernel: [<c0210619>] blk_run_queues+0x9d/0xe4
Dec 7 18:27:45 pici kernel: [<c01520ba>] __wait_on_buffer+0x92/0xb4
Dec 7 18:27:45 pici kernel: [<c011c680>] autoremove_wake_function+0x0/0x3c
Dec 7 18:27:45 pici kernel: [<c011c680>] autoremove_wake_function+0x0/0x3c
Dec 7 18:27:45 pici kernel: [<c01540ef>] __block_prepare_write+0x2a3/0x398
Dec 7 18:27:45 pici kernel: [<c0154904>] block_prepare_write+0x20/0x3c
Dec 7 18:27:45 pici kernel: [<c019d2b8>] ext2_get_block+0x0/0x3b4
Dec 7 18:27:45 pici kernel: [<c019d6d9>] ext2_prepare_write+0x19/0x20
Dec 7 18:27:45 pici kernel: [<c019d2b8>] ext2_get_block+0x0/0x3b4
Dec 7 18:27:45 pici kernel: [<c013800e>] generic_file_aio_write_nolock+0x6ba/0xa9c
Dec 7 18:27:45 pici kernel: [<c0143b8b>] do_anonymous_page+0x22f/0x23c
Dec 7 18:27:45 pici kernel: [<c013845f>] generic_file_write_nolock+0x6f/0x8c
Dec 7 18:27:45 pici kernel: [<c0117cf5>] do_page_fault+0x15d/0x4aa
Dec 7 18:27:45 pici kernel: [<c0117b98>] do_page_fault+0x0/0x4aa
Dec 7 18:27:45 pici kernel: [<c013856f>] generic_file_write+0x57/0x70
Dec 7 18:27:45 pici kernel: [<c0150fee>] vfs_write+0x9e/0xd0
Dec 7 18:27:45 pici kernel: [<c01510a0>] sys_write+0x30/0x50
Dec 7 18:27:45 pici kernel: [<c010917f>] syscall_call+0x7/0xb
Dec 7 18:27:45 pici kernel:
Dec 7 18:27:45 pici kernel: handlers:
Dec 7 18:27:45 pici kernel: [<c0221364>] (ide_intr+0x0/0x1b4)
Dec 7 18:27:45 pici kernel: [<c0221364>] (ide_intr+0x0/0x1b4)
Dec 7 18:27:45 pici kernel: Disabling IRQ #18
I am using a P4 2.6 Ghz without HT activated
512 MB DDR PC3200 on an ASUS P4P800 Deluxe MB.
HardDrive is on SATA (native mode) : Maxtor 6Y120MO.
2.4.23 doesn't have this problem but keeps using 30-50% CPU even if I do nothing.
Attached is attached grep "=[y|m]" .config
Regards,
Raphaël RIGO
[-- Attachment #2: .configok --]
[-- Type: text/plain, Size: 3693 bytes --]
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_MODULES=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
CONFIG_X86_PC=y
CONFIG_MPENTIUM4=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_ACPI_BOOT=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
CONFIG_BLK_DEV_FD=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_IDE_TASKFILE_IO=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_IDEDMA_PCI_WIP=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_REPORT_LUNS=y
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IPV6_SCTP__=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_SK98LIN=m
CONFIG_INPUT=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_PRINTER=m
CONFIG_AGP=y
CONFIG_AGP_INTEL=y
CONFIG_DRM=y
CONFIG_DRM_I830=y
CONFIG_VIDEO_DEV=m
CONFIG_FB=y
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_INTEL8X0=y
CONFIG_USB=m
CONFIG_USB_DEVICEFS=y
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_AUTOFS4_FS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_UDF_FS=y
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_DEVPTS_FS=y
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_SMB_FS=y
CONFIG_MSDOS_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_FRAME_POINTER=y
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_CRC32=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y
next reply other threads:[~2003-12-07 17:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-07 17:48 Raphaël Rigo [this message]
2003-12-07 18:26 ` [OOPS?] 2.6-test11 : problem about irq18 Zwane Mwaikambo
2003-12-08 18:48 Jon Burgess
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3FD367F1.2060501@inp-net.eu.org \
--to=raphael.rigo@inp-net.eu.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.