From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265552AbUANKD4 (ORCPT ); Wed, 14 Jan 2004 05:03:56 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S265461AbUANKDz (ORCPT ); Wed, 14 Jan 2004 05:03:55 -0500 Received: from mail-4.tiscali.it ([195.130.225.150]:2477 "EHLO mail-4.tiscali.it") by vger.kernel.org with ESMTP id S265439AbUANKDm convert rfc822-to-8bit (ORCPT ); Wed, 14 Jan 2004 05:03:42 -0500 Date: Wed, 14 Jan 2004 11:03:38 +0100 Message-ID: <3FE5F1110002B70F@mail-4.tiscali.it> In-Reply-To: <20040113131806.GA343@elf.ucw.cz> From: m.andreolini@tiscali.it Subject: Re: problems with suspend-to-disk (ACPI), 2.6.1-rc2 To: "Pavel Machek" Cc: linux-kernel@vger.kernel.org MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org SiS900 driver needs to be fixed. Or perhaps... try following patch. Hi Pavel, thanks for your prompt response. I applied your patch to my 2.6.1-rc2 and the bash still gets killed during the resume. Here is the output of dmesg: Linux version 2.6.1-rc2 (andreoli@enea) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r3, propolice)) #1 Tue Jan 13 21:38:14 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002bfea000 (usable) BIOS-e820: 000000002bfea000 - 000000002bfef000 (ACPI data) BIOS-e820: 000000002bfef000 - 000000002bfff000 (reserved) BIOS-e820: 000000002bfff000 - 000000002c000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 703MB LOWMEM available. On node 0 totalpages: 180202 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 176106 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ASUS ) @ 0x000f6e10 ACPI: RSDT (v001 ASUS L3000D 0x42302e31 MSFT 0x31313031) @ 0x2bfea000 ACPI: FADT (v001 ASUS L3000D 0x42302e31 MSFT 0x31313031) @ 0x2bfea080 ACPI: BOOT (v001 ASUS L3000D 0x42302e31 MSFT 0x31313031) @ 0x2bfea040 ACPI: DSDT (v001 ASUS L3000D 0x00001000 MSFT 0x0100000e) @ 0x00000000 Building zonelist for node : 0 Kernel command line: root=/dev/hda7 Initializing CPU#0 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 1674.442 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Memory: 710120k/720808k available (1759k kernel code, 9916k reserved, 657k data, 120k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3309.56 BogoMIPS Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD mobile AMD Athlon(tm) XP-M 2000+ stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf1050, last bus=1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20031002 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 11 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 11 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Uncovering SIS962 that hid as a SIS503 (compatible=0) Enabling SiS 96x SMBus. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: Power Resource [FN0] (on) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 Machine check exception polling timer started. devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 udf: registering filesystem Initializing Cryptographic API pty: 256 Unix98 ptys configured Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N040ATCS04-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: TOSHIBA DVD-ROM SD-R2312, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 78140160 sectors (40007 MB) w/1768KiB Cache, CHS=65535/16/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 mice: PS/2 mouse device common for all mice i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 Synaptics Touchpad, model: 1 Firmware: 4.6 180 degree mounted touchpad Sensor: 18 new absolute packet format Touchpad has extended capability bits -> four buttons -> multifinger detection -> palm detection input: SynPS/2 Synaptics TouchPad on isa0060/serio4 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 PM: Reading pmdisk image. PM: Resume from disk failed. ACPI: (supports S0 S1 S3 S4 S5) found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda7) for (hda7) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 120k freed Adding 987956k swap on /dev/hda6. Priority:-1 extents:1 sis900.c: v1.08.07 11/02/2003 eth0: ICS LAN PHY transceiver found at address 1. eth0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xa000, IRQ 11, 00:0c:6e:35:69:ed. ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LID] ACPI: Fan [FAN0] (on) ACPI: Processor [CPU0] (supports C1) ACPI: Thermal Zone [THRM] (61 C) drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub Real Time Clock Driver v1.12 eth0: Media Link On 100mbps full-duplex intel8x0: clocking to 48000 atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). Stopping tasks: =====================| Freeing memory: ..................................| hdc: start_power_step(step: 0) hdc: completing PM request, suspend hda: start_power_step(step: 0) hda: completing PM request, suspend resume= option should be used to set suspend device/critical section: Counting pages to copy[nosave c035a000] (pages needed: 5318+512=5830 free: 174883) Alloc pagedir [nosave c035a000]<4>Freeing prev allocated pagedir NETDEV WATCHDOG: eth0: transmit timed out eth0: Transmit timeout, status 00000000 03008000 bad: scheduling while atomic! Call Trace: [] schedule+0x586/0x590 [] __mod_timer+0xfc/0x170 [] schedule_timeout+0x63/0xc0 [] process_timeout+0x0/0x10 [] pci_set_power_state+0xeb/0x190 [] sis900_resume+0x63/0x130 [sis900] [] pci_device_resume+0x26/0x30 [] resume_device+0x29/0x30 [] dpm_resume+0x34/0x60 [] device_resume+0x19/0x30 [] do_magic_resume_2+0x74/0xf0 [] do_magic+0x11f/0x130 [] software_suspend+0xa6/0xc0 [] acpi_system_write_sleep+0xab/0xc9 [] vfs_write+0xbe/0x130 [] sys_write+0x42/0x70 [] syscall_call+0x7/0xb hda: Wakeup request inited, waiting for !BSY... hda: start_power_step(step: 1000) blk: queue ebd77a00, I/O limit 4095Mb (mask 0xffffffff) hda: completing PM request, resume hdc: Wakeup request inited, waiting for !BSY... hdc: start_power_step(step: 1000) hdc: completing PM request, resume Fixing swap signatures... <3>bad: scheduling while atomic! Call Trace: [] schedule+0x586/0x590 [] do_ide_request+0x1d/0x30 [] generic_unplug_device+0x77/0x80 [] blk_run_queues+0xab/0xc0 [] io_schedule+0xe/0x20 [] wait_on_page_bit+0xb1/0xe0 [] autoremove_wake_function+0x0/0x50 [] autoremove_wake_function+0x0/0x50 [] swap_readpage+0x5b/0x90 [] rw_swap_page_sync+0xc1/0x100 [] mark_swapfiles+0x7c/0x1b0 [] do_magic_resume_2+0xa9/0xf0 [] do_magic+0x11f/0x130 [] software_suspend+0xa6/0xc0 [] acpi_system_write_sleep+0xab/0xc9 [] vfs_write+0xbe/0x130 [] sys_write+0x42/0x70 [] syscall_call+0x7/0xb bad: scheduling while atomic! Call Trace: [] schedule+0x586/0x590 [] generic_make_request+0x16e/0x1f0 [] io_schedule+0xe/0x20 [] wait_on_page_bit+0xb1/0xe0 [] autoremove_wake_function+0x0/0x50 [] autoremove_wake_function+0x0/0x50 [] swap_writepage+0x99/0xd0 [] rw_swap_page_sync+0xc1/0x100 [] mark_swapfiles+0xef/0x1b0 [] do_magic_resume_2+0xa9/0xf0 [] do_magic+0x11f/0x130 [] software_suspend+0xa6/0xc0 [] acpi_system_write_sleep+0xab/0xc9 [] vfs_write+0xbe/0x130 [] sys_write+0x42/0x70 [] syscall_call+0x7/0xb ok Restarting tasks...<3>bad: scheduling while atomic! Call Trace: [] schedule+0x586/0x590 [] try_to_wake_up+0x9e/0x160 [] wake_up_process+0x1e/0x20 [] thaw_processes+0xb8/0x100 [] software_suspend+0x98/0xc0 [] acpi_system_write_sleep+0xab/0xc9 [] vfs_write+0xbe/0x130 [] sys_write+0x42/0x70 [] syscall_call+0x7/0xb done bad: scheduling while atomic! Call Trace: [] schedule+0x586/0x590 [] sys_write+0x42/0x70 [] work_resched+0x5/0x16 bad: scheduling while atomic! Call Trace: [] schedule+0x586/0x590 [] fixup_exception+0x16/0x40 [] __is_prefetch+0x6e/0x220 [] do_page_fault+0x110/0x512 [] printk+0x11d/0x180 [] sys_sched_yield+0x87/0xd0 [] coredump_wait+0x38/0xa0 [] do_coredump+0xeb/0x1ec [] wake_up_state+0x1a/0x20 [] specific_send_sig_info+0xc4/0x130 [] __dequeue_signal+0xe8/0x190 [] dequeue_signal+0x35/0xa0 [] get_signal_to_deliver+0x20a/0x380 [] do_signal+0xe2/0x120 [] recalc_task_prio+0x90/0x1a0 [] schedule+0x334/0x590 [] do_page_fault+0x0/0x512 [] do_notify_resume+0x59/0x5c [] work_notifysig+0x13/0x15 note: bash[3649] exited with preempt_count 1 eth0: Media Link On 100mbps full-duplex Bye Mauro Andreolini __________________________________________________________________ Tiscali ADSL SENZA CANONE: Attivazione GRATIS, contributo adesione GRATIS, modem GRATIS, 50 ore di navigazione GRATIS. ABBONARTI TI COSTA SOLO UN CLICK! http://point.tiscali.it/adsl/index.shtml