From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262050AbUANR7o (ORCPT ); Wed, 14 Jan 2004 12:59:44 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262052AbUANR7o (ORCPT ); Wed, 14 Jan 2004 12:59:44 -0500 Received: from mail-4.tiscali.it ([195.130.225.150]:7064 "EHLO mail-4.tiscali.it") by vger.kernel.org with ESMTP id S262050AbUANR7n convert rfc822-to-8bit (ORCPT ); Wed, 14 Jan 2004 12:59:43 -0500 Date: Wed, 14 Jan 2004 18:59:36 +0100 Message-ID: <3FE5F1110002D60F@mail-4.tiscali.it> In-Reply-To: <20040114165056.GD13899@picchio.gall.it> From: m.andreolini@tiscali.it Subject: Re: problems with suspend-to-disk (ACPI), 2.6.1-rc2 To: "Daniele Venzano" Cc: linux-kernel@vger.kernel.org MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org This is quite strange because for me the card works on resume, I have the driver compiled in, but that should make no difference. Could you try to plug/unplug the cable and see if it detects media changes ? Messages like "Media link on/off" should appear. I have verified this, but no msg is displayed. If I reload the sis900 module manually, it starts logging those Media Link Off Media Link On 100mbps full-duplex messages whenever I unplug/plug the network cable. Also, since probably the problem is that the mac filter is not reset correctly, could you try tcpdump and see if in promiscous mode it receives something ? I can't even 'tcpdump eth0' since the eth0 interface is not brought up correctly on resume: ifconfig yields only the loopback entry. Bye Mauro Andreolini __________________________________________________________________ Tiscali ADSL SENZA CANONE: Attivazione GRATIS, contributo adesione GRATIS, modem GRATIS, 50 ore di navigazione GRATIS. ABBONARTI TI COSTA SOLO UN CLICK! http://point.tiscali.it/adsl/index.shtml