All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@kernel.org>
To: devicetree@vger.kernel.org, f.fainelli@gmail.com,
	jonas.gorski@gmail.com, krzysztof.kozlowski+dt@linaro.org,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	mturquette@baylibre.com, p.zabel@pengutronix.de,
	robh+dt@kernel.org, william.zhang@broadcom.com,
	"Álvaro Fernández Rojas" <noltari@gmail.com>
Cc: "Álvaro Fernández Rojas" <noltari@gmail.com>
Subject: Re: [PATCH v3 4/4] clk: bcm: Add BCM63268 timer clock and reset driver
Date: Tue, 21 Mar 2023 15:57:34 -0700	[thread overview]
Message-ID: <3a1d7b271a42324c056d983e1943b386.sboyd@kernel.org> (raw)
In-Reply-To: <20230321201022.1052743-5-noltari@gmail.com>

Quoting Álvaro Fernández Rojas (2023-03-21 13:10:22)
> diff --git a/drivers/clk/bcm/clk-bcm63268-timer.c b/drivers/clk/bcm/clk-bcm63268-timer.c
> new file mode 100644
> index 000000000000..6a1fdd193cb5
> --- /dev/null
> +++ b/drivers/clk/bcm/clk-bcm63268-timer.c
> @@ -0,0 +1,232 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * BCM63268 Timer Clock and Reset Controller Driver
[...]
> +
> +static inline struct bcm63268_tclkrst_hw *
> +to_bcm63268_timer_reset(struct reset_controller_dev *rcdev)
> +{
> +       return container_of(rcdev, struct bcm63268_tclkrst_hw, rcdev);
> +}
> +
> +static int bcm63268_timer_reset_update(struct reset_controller_dev *rcdev,
> +                               unsigned long id, bool assert)
> +{
> +       struct bcm63268_tclkrst_hw *reset = to_bcm63268_timer_reset(rcdev);
> +       unsigned long flags;
> +       uint32_t val;
> +
> +       spin_lock_irqsave(&reset->lock, flags);
> +       val = __raw_readl(reset->regs);

Use regular ol readl() here, unless you have some need for no barrires
or byte swapping.

> +       if (assert)
> +               val &= ~BIT(id);
> +       else
> +               val |= BIT(id);
> +       __raw_writel(val, reset->regs);

Same.

> +       spin_unlock_irqrestore(&reset->lock, flags);
> +
> +       return 0;
> +}
> +
[...]
> +
> +static int bcm63268_tclk_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       const struct bcm63268_tclk_table_entry *entry, *table;
> +       struct bcm63268_tclkrst_hw *hw;
> +       struct clk_hw *clk;
> +       u8 maxbit = 0;
> +       int i, ret;
> +
> +       table = of_device_get_match_data(dev);

Use device_get_match_data() instead.

> +       if (!table)
> +               return -EINVAL;
> +
> +       for (entry = table; entry->name; entry++)
> +               maxbit = max(maxbit, entry->bit);
> +       maxbit++;
> +
> +       hw = devm_kzalloc(&pdev->dev, struct_size(hw, data.hws, maxbit),
> +                         GFP_KERNEL);
> +       if (!hw)
> +               return -ENOMEM;
> +
> +       platform_set_drvdata(pdev, hw);
> +
> +       spin_lock_init(&hw->lock);
> +
> +       hw->data.num = maxbit;
> +       for (i = 0; i < maxbit; i++)
> +               hw->data.hws[i] = ERR_PTR(-ENODEV);
> +
> +       hw->regs = devm_platform_ioremap_resource(pdev, 0);
> +       if (IS_ERR(hw->regs))
> +               return PTR_ERR(hw->regs);
> +
> +       for (entry = table; entry->name; entry++) {
> +               clk = clk_hw_register_gate(dev, entry->name, NULL, 0,

Use devm?

> +                                          hw->regs, entry->bit,
> +                                          CLK_GATE_BIG_ENDIAN, &hw->lock);
> +               if (IS_ERR(clk)) {
> +                       ret = PTR_ERR(clk);
> +                       goto out_err;
> +               }
> +
> +               hw->data.hws[entry->bit] = clk;
> +       }
> +
> +       ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
> +                                         &hw->data);
> +       if (ret)
> +               return ret;
> +
> +       hw->rcdev.of_node = dev->of_node;
> +       hw->rcdev.ops = &bcm63268_timer_reset_ops;
> +
> +       ret = devm_reset_controller_register(dev, &hw->rcdev);
> +       if (ret)
> +               dev_err(dev, "Failed to register reset controller\n");
> +
> +       return 0;
> +
> +out_err:
> +       for (i = 0; i < hw->data.num; i++) {
> +               if (!IS_ERR(hw->data.hws[i]))
> +                       clk_hw_unregister_gate(hw->data.hws[i]);

And then drop this?

> +       }
> +
> +       return ret;
> +}
> +
> +static const struct of_device_id bcm63268_tclk_dt_ids[] = {
> +       {
> +               .compatible = "brcm,bcm63268-timer-clocks",
> +               .data = &bcm63268_timer_clocks,

Are you planning on adding more SoCs to this driver? The data can
currently be always assumed to be bcm63268_timer_clocks

> +       }, {
> +               /* sentinel */
> +       }
> +};
> +

  reply	other threads:[~2023-03-21 22:57 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-15 12:26 [PATCH v2 0/4] clk: add BCM63268 timer clock and reset Álvaro Fernández Rojas
2021-03-15 12:26 ` [PATCH v2 1/4] dt-bindings: clk: add BCM63268 timer clock definitions Álvaro Fernández Rojas
2021-03-15 12:26 ` [PATCH v2 2/4] dt-bindings: reset: add BCM63268 timer reset definitions Álvaro Fernández Rojas
2021-03-15 12:26 ` [PATCH v2 3/4] dt-bindings: clock: Add BCM63268 timer binding Álvaro Fernández Rojas
2021-03-15 12:26 ` [PATCH v2 4/4] clk: bcm: Add BCM63268 timer clock and reset driver Álvaro Fernández Rojas
2021-03-20  7:16   ` kernel test robot
2023-03-21 20:10 ` [PATCH v3 0/4] clk: add BCM63268 timer clock and reset Álvaro Fernández Rojas
2023-03-21 20:10   ` [PATCH v3 1/4] dt-bindings: clk: add BCM63268 timer clock definitions Álvaro Fernández Rojas
2023-03-21 20:10   ` [PATCH v3 2/4] dt-bindings: reset: add BCM63268 timer reset definitions Álvaro Fernández Rojas
2023-03-21 20:10   ` [PATCH v3 3/4] dt-bindings: clock: Add BCM63268 timer binding Álvaro Fernández Rojas
2023-03-21 20:10   ` [PATCH v3 4/4] clk: bcm: Add BCM63268 timer clock and reset driver Álvaro Fernández Rojas
2023-03-21 22:57     ` Stephen Boyd [this message]
2023-03-21 23:00       ` Florian Fainelli
2023-03-21 23:06         ` Stephen Boyd
2023-03-21 23:09           ` Florian Fainelli
2023-03-21 23:23             ` Stephen Boyd
2023-03-22 17:17               ` Álvaro Fernández Rojas
2023-03-22 17:18               ` Florian Fainelli
2023-03-21 22:54   ` [PATCH v3 0/4] clk: add BCM63268 timer clock and reset Stephen Boyd
2023-03-22 17:18     ` Álvaro Fernández Rojas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3a1d7b271a42324c056d983e1943b386.sboyd@kernel.org \
    --to=sboyd@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=jonas.gorski@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=noltari@gmail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=william.zhang@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.