Re: BTRFS critical (device md126): corrupt node: root=1 block=13404298215424 slot=307, unaligned pointer, have 12567101254720864896 should be aligned to 4096

[Qu Wenruo <quwenruo.btrfs@gmx.com>]

On 2022/7/7 09:32, Denis Roy wrote:
> I am using netgate readynas firmware 6.10.7, 5 drives ,X-RAID.  I had a
> power failure, but the nas never did a full shutdown. Nevertheless, the
> raid was in RO when I notice there was a problem. At the time I thought
> it was plex app, so I rebooted and then the raid never cam up.  Ever
> where you read up on BTRFS, they say don’t try commands you can do more
> dameage. So here I am. I added some info I believe you need and if there
> anything else, let me know.

That error message means, a tree node is pointing to a location which is
not aligned to sectorsize (the minimal unit of btrfs read/write).

But there are several problems:

- The bytenr 12567101254720864896, is aligned to 4096
   A quick python run shows:
   >>> 12567101254720864896 / 4096.0
   3068139954765836.0

   So I don't know why kernel would even output it.

- No extra context on the corrupted node.
   Mind to dump the tree block?

   # btrfs ins dump-tree -b 13404298215424 <dev>

   This should provide enough info on that.

- Extra btrfs check run on the array?
   Better to use the latest btrfs-progs to provide more comprehensive
   result.

Thanks,
Qu
>
> root@nas:~# btrfs version
>
> btrfs-progs v4.16
>
> root@nas:~# uname -a
>
> Linux nas 4.4.218.x86_64.1 #1 SMP Sun Nov 7 15:20:05 UTC 2021 x86_64
> GNU/Linux
>
> root@nas:~# btrfs fi show
>
> Label: '33ea130b:root'  uuid: 4a0317c0-214d-4204-b722-d6176eae04c0
>
>         Total devices 1 FS bytes used 1.70GiB
>
>         devid    1 size 4.00GiB used 2.86GiB path /dev/md0
>
> Label: '33ea130b:data'  uuid: cdc0bc68-6685-42df-a26f-63b1db286b12
>
>         Total devices 2 FS bytes used 8.81TiB
>
>         devid    1 size 10.90TiB used 9.00TiB path /dev/md127
>
>         devid    2 size 2.73TiB used 19.03GiB path /dev/md126
>
> root@nas:~# dmesg version
>
> [    0.000000] Initializing cgroup subsys cpuset
>
> [    0.000000] Initializing cgroup subsys cpu
>
> [    0.000000] Initializing cgroup subsys cpuacct
>
> [    0.000000] Linux version 4.4.218.x86_64.1 (root@blocks) (gcc version
> 8.3.0 (Debian 8.3.0-6) ) #1 SMP Sun Nov 7 15:20:05 UTC 2021
>
> [    0.000000] Command line: initrd=initrd.gz reason=normal
> BOOT_IMAGE=kernel
>
> [    0.000000] KERNEL supported cpus:
>
> [    0.000000]   Intel GenuineIntel
>
> [    0.000000] Disabled fast string operations
>
> [    0.000000] x86/fpu: Legacy x87 FPU detected.
>
> [    0.000000] e820: BIOS-provided physical RAM map:
>
> [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cbff]
> usable
>
> [    0.000000] BIOS-e820: [mem 0x000000000009cc00-0x000000000009ffff]
> reserved
>
> [    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
> reserved
>
> [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000afeaffff]
> usable
>
> [    0.000000] BIOS-e820: [mem 0x00000000afeb0000-0x00000000afebdfff]
> ACPI data
>
> [    0.000000] BIOS-e820: [mem 0x00000000afebe000-0x00000000afeeffff]
> ACPI NVS
>
> [    0.000000] BIOS-e820: [mem 0x00000000afef0000-0x00000000afefffff]
> reserved
>
> [    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
> reserved
>
> [    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff]
> reserved
>
> [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024fffffff]
> usable
>
> [    0.000000] NX (Execute Disable) protection: active
>
> [    0.000000] SMBIOS 2.4 present.
>
> [    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./To be
> filled by O.E.M., BIOS 080014 07/26/2010
>
> [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
>
> [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
>
> [    0.000000] e820: last_pfn = 0x250000 max_arch_pfn = 0x400000000
>
> [    0.000000] MTRR default type: uncachable
>
> [    0.000000] MTRR fixed ranges enabled:
>
> [    0.000000]   00000-9FFFF write-back
>
> [    0.000000]   A0000-BFFFF uncachable
>
> [    0.000000]   C0000-DFFFF write-protect
>
> [    0.000000]   E0000-EFFFF write-through
>
> [    0.000000]   F0000-FFFFF write-protect
>
> [    0.000000] MTRR variable ranges enabled:
>
> [    0.000000]   0 base 000000000 mask E00000000 write-back
>
> [    0.000000]   1 base 200000000 mask FC0000000 write-back
>
> [    0.000000]   2 base 240000000 mask FF0000000 write-back
>
> [    0.000000]   3 base 0B0000000 mask FF0000000 uncachable
>
> [    0.000000]   4 base 0C0000000 mask FC0000000 uncachable
>
> [    0.000000]   5 base 0AFF00000 mask FFFF00000 uncachable
>
> [    0.000000]   6 disabled
>
> [    0.000000]   7 disabled
>
> [    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT
>
> [    0.000000] e820: update [mem 0xaff00000-0xffffffff] usable ==> reserved
>
> [    0.000000] e820: last_pfn = 0xafeb0 max_arch_pfn = 0x400000000
>
> [    0.000000] Base memory trampoline at [ffff880000094000] 94000 size
> 28672
>
> [    0.000000] BRK [0x08f56000, 0x08f56fff] PGTABLE
>
> [    0.000000] BRK [0x08f57000, 0x08f57fff] PGTABLE
>
> [    0.000000] BRK [0x08f58000, 0x08f58fff] PGTABLE
>
> [    0.000000] BRK [0x08f59000, 0x08f59fff] PGTABLE
>
> [    0.000000] BRK [0x08f5a000, 0x08f5afff] PGTABLE
>
> [    0.000000] BRK [0x08f5b000, 0x08f5bfff] PGTABLE
>
> [    0.000000] RAMDISK: [mem 0x7fb9f000-0x7fffffff]
>
> [    0.000000] ACPI: Early table checksum verification disabled
>
> [    0.000000] ACPI: RSDP 0x00000000000F9C00 000014 (v00 ACPIAM)
>
> [    0.000000] ACPI: RSDT 0x00000000AFEB0000 000038 (v01 A M I  OEMRSDT
> 07001026 MSFT 00000097)
>
> [    0.000000] ACPI: FACP 0x00000000AFEB0200 000084 (v02 A M I  OEMFACP
> 07001026 MSFT 00000097)
>
> [    0.000000] ACPI: DSDT 0x00000000AFEB0440 005B7A (v01 1ADHK  1ADHK007
> 00000007 INTL 20051117)
>
> [    0.000000] ACPI: FACS 0x00000000AFEBE000 000040
>
> [    0.000000] ACPI: APIC 0x00000000AFEB0390 00006C (v01 A M I  OEMAPIC
> 07001026 MSFT 00000097)
>
> [    0.000000] ACPI: MCFG 0x00000000AFEB0400 00003C (v01 A M I  OEMMCFG
> 07001026 MSFT 00000097)
>
> [    0.000000] ACPI: OEMB 0x00000000AFEBE040 000060 (v01 A M I  AMI_OEM
> 07001026 MSFT 00000097)
>
> [    0.000000] ACPI: GSCI 0x00000000AFEBE0A0 002024 (v01 A M I  GMCHSCI
> 07001026 MSFT 00000097)
>
> [    0.000000] ACPI: Local APIC address 0xfee00000
>
> [    0.000000] Zone ranges:
>
> [    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
>
> [    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
>
> [    0.000000]   Normal   [mem 0x0000000100000000-0x000000024fffffff]
>
> [    0.000000] Movable zone start for each node
>
> [    0.000000] Early memory node ranges
>
> [    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009bfff]
>
> [    0.000000]   node   0: [mem 0x0000000000100000-0x00000000afeaffff]
>
> [    0.000000]   node   0: [mem 0x0000000100000000-0x000000024fffffff]
>
> [    0.000000] Initmem setup node 0 [mem
> 0x0000000000001000-0x000000024fffffff]
>
> [    0.000000] On node 0 totalpages: 2096715
>
> [    0.000000]   DMA zone: 64 pages used for memmap
>
> [    0.000000]   DMA zone: 22 pages reserved
>
> [    0.000000]   DMA zone: 3995 pages, LIFO batch:0
>
> [    0.000000]   DMA32 zone: 11195 pages used for memmap
>
> [    0.000000]   DMA32 zone: 716464 pages, LIFO batch:31
>
> [    0.000000]   Normal zone: 21504 pages used for memmap
>
> [    0.000000]   Normal zone: 1376256 pages, LIFO batch:31
>
> [    0.000000] Reserving Intel graphics stolen memory at
> 0xaff00000-0xafffffff
>
> [    0.000000] ACPI: PM-Timer IO Port: 0x808
>
> [    0.000000] ACPI: Local APIC address 0xfee00000
>
> [    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI
> 0-23
>
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>
> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>
> [    0.000000] ACPI: IRQ0 used by override.
>
> [    0.000000] ACPI: IRQ9 used by override.
>
> [    0.000000] Using ACPI (MADT) for SMP configuration information
>
> [    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
>
> [    0.000000] e820: [mem 0xb0000000-0xfedfffff] available for PCI devices
>
> [    0.000000] clocksource: refined-jiffies: mask: 0xffffffff
> max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
>
> [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4
> nr_node_ids:1
>
> [    0.000000] PERCPU: Embedded 30 pages/cpu @ffff88024fc00000 s82392
> r8192 d32296 u524288
>
> [    0.000000] pcpu-alloc: s82392 r8192 d32296 u524288 alloc=1*2097152
>
> [    0.000000] pcpu-alloc: [0] 0 1 2 3
>
> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total pages: 2063930
>
> [    0.000000] Kernel command line: console=tty0 console=ttyS0,115200
> hpet=disable initrd=initrd.gz reason=normal BOOT_IMAGE=kernel
>
> [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
>
> [    0.000000] Dentry cache hash table entries: 1048576 (order: 11,
> 8388608 bytes)
>
> [    0.000000] Inode-cache hash table entries: 524288 (order: 10,
> 4194304 bytes)
>
> [    0.000000] Memory: 8156496K/8386860K available (9142K kernel code,
> 989K rwdata, 3940K rodata, 872K init, 696K bss, 230364K reserved, 0K
> cma-reserved)
>
> [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
>
> [    0.000000] Kernel/User page tables isolation: enabled
>
> [    0.000000] Hierarchical RCU implementation.
>
> [    0.000000]      RCU debugfs-based tracing is enabled.
>
> [    0.000000]      Build-time adjustment of leaf fanout to 64.
>
> [    0.000000]      RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
>
> [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
>
> [    0.000000] NR_IRQS:4352 nr_irqs:456 16
>
> [    0.000000] Console: colour VGA+ 80x25
>
> [    0.000000] console [tty0] enabled
>
> [    0.000000] console [ttyS0] enabled
>
> [    0.000000] tsc: Fast TSC calibration using PIT
>
> [    0.000000] tsc: Detected 2660.100 MHz processor
>
> [    0.001011] Calibrating delay loop (skipped), value calculated using
> timer frequency.. 5320.20 BogoMIPS (lpj=2660100)
>
> [    0.001014] pid_max: default: 32768 minimum: 301
>
> [    0.001020] ACPI: Core revision 20150930
>
> [    0.004916] ACPI: 1 ACPI AML tables successfully acquired and loaded
>
> [    0.004937] Security Framework initialized
>
> [    0.004948] Mount-cache hash table entries: 16384 (order: 5, 131072
> bytes)
>
> [    0.004951] Mountpoint-cache hash table entries: 16384 (order: 5,
> 131072 bytes)
>
> [    0.005355] Initializing cgroup subsys io
>
> [    0.005360] Initializing cgroup subsys memory
>
> [    0.005370] Initializing cgroup subsys devices
>
> [    0.005374] Initializing cgroup subsys freezer
>
> [    0.005378] Initializing cgroup subsys net_cls
>
> [    0.005382] Initializing cgroup subsys perf_event
>
> [    0.005385] Initializing cgroup subsys net_prio
>
> [    0.005389] Initializing cgroup subsys pids
>
> [    0.005406] Disabled fast string operations
>
> [    0.005410] CPU: Physical Processor ID: 0
>
> [    0.005411] CPU: Processor Core ID: 0
>
> [    0.005413] mce: CPU supports 6 MCE banks
>
> [    0.005423] CPU0: Thermal monitoring enabled (TM2)
>
> [    0.005426] process: using mwait in idle threads
>
> [    0.005431] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
>
> [    0.005433] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
>
> [    0.005435] Spectre V1 : Mitigation: usercopy/swapgs barriers and
> __user pointer sanitization
>
> [    0.005438] Spectre V2 : Mitigation: Full generic retpoline
>
> [    0.005439] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling
> RSB on context switch
>
> [    0.005441] Speculative Store Bypass: Vulnerable
>
> [    0.005464] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
>
> [    0.005833] Freeing SMP alternatives memory: 40K
>
> [    0.006445] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>
> [    0.118836] smpboot: CPU0: Intel(R) Xeon(R) CPU           X3230  @
> 2.66GHz (family: 0x6, model: 0xf, stepping: 0xb)
>
> [    0.118850] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events,
> Intel PMU driver.
>
> [    0.118861] perf_event_intel: PEBS disabled due to CPU errata
>
> [    0.118864] ... version: 2
>
> [    0.118865] ... bit width: 40
>
> [    0.118866] ... generic registers: 2
>
> [    0.118868] ... value mask: 000000ffffffffff
>
> [    0.118869] ... max period: 000000007fffffff
>
> [    0.118870] ... fixed-purpose events: 3
>
> [    0.118872] ... event mask: 0000000700000003
>
> [    0.119646] x86: Booting SMP configuration:
>
> [    0.119649] .... node  #0, CPUs: #1 #2 #3
>
> [    0.124026] x86: Booted up 1 node, 4 CPUs
>
> [    0.124031] smpboot: Total of 4 processors activated (21280.80 BogoMIPS)
>
> [    0.125124] NMI watchdog: enabled on all CPUs, permanently consumes
> one hw-PMU counter.
>
> [    0.125195] devtmpfs: initialized
>
> [    0.126201] clocksource: jiffies: mask: 0xffffffff max_cycles:
> 0xffffffff, max_idle_ns: 1911260446275000 ns
>
> [    0.126209] futex hash table entries: 1024 (order: 4, 65536 bytes)
>
> [    0.126263] xor: measuring software checksum speed
>
> [    0.136001]    prefetch64-sse: 15092.000 MB/sec
>
> [    0.146001]    generic_sse: 12756.000 MB/sec
>
> [    0.146003] xor: using function: prefetch64-sse (15092.000 MB/sec)
>
> [    0.146010] pinctrl core: initialized pinctrl subsystem
>
> [    0.146193] NET: Registered protocol family 16
>
> [    0.150006] cpuidle: using governor ladder
>
> [    0.154004] cpuidle: using governor menu
>
> [    0.154232] ACPI: bus type PCI registered
>
> [    0.154339] dca service started, version 1.12.1
>
> [    0.154354] PCI: Using configuration type 1 for base access
>
> [    0.180775] raid6: sse2x1   gen()  4031 MB/s
>
> [    0.197772] raid6: sse2x1   xor()  4281 MB/s
>
> [    0.214771] raid6: sse2x2   gen()  4476 MB/s
>
> [    0.231775] raid6: sse2x2   xor()  5458 MB/s
>
> [    0.248772] raid6: sse2x4   gen()  7894 MB/s
>
> [    0.265772] raid6: sse2x4   xor()  5812 MB/s
>
> [    0.265774] raid6: using algorithm sse2x4 gen() 7894 MB/s
>
> [    0.265775] raid6: .... xor() 5812 MB/s, rmw enabled
>
> [    0.265777] raid6: using ssse3x2 recovery algorithm
>
> [    0.266024] ACPI: Added _OSI(Module Device)
>
> [    0.266024] ACPI: Added _OSI(Processor Device)
>
> [    0.266024] ACPI: Added _OSI(3.0 _SCP Extensions)
>
> [    0.266024] ACPI: Added _OSI(Processor Aggregator Device)
>
> [    0.267725] ACPI: Executed 1 blocks of module-level executable AML code
>
> [    0.270238] ACPI: Interpreter enabled
>
> [    0.270244] ACPI: (supports S0 S5)
>
> [    0.270246] ACPI: Using IOAPIC for interrupt routing
>
> [    0.270278] PCI: Using host bridge windows from ACPI; if necessary,
> use "pci=nocrs" and report a bug
>
> [    0.276431] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>
> [    0.276436] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments
> MSI]
>
> [    0.276442] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
>
> [    0.276535] PCI host bridge to bus 0000:00
>
> [    0.276539] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7
> window]
>
> [    0.276541] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff
> window]
>
> [    0.276544] pci_bus 0000:00: root bus resource [mem
> 0x000a0000-0x000bffff window]
>
> [    0.276546] pci_bus 0000:00: root bus resource [mem
> 0x000d0000-0x000dffff window]
>
> [    0.276549] pci_bus 0000:00: root bus resource [mem
> 0xaff00000-0xffffffff window]
>
> [    0.276551] pci_bus 0000:00: root bus resource [bus 00-ff]
>
> [    0.276566] pci 0000:00:00.0: [8086:2990] type 00 class 0x060000
>
> [    0.276676] pci 0000:00:02.0: [8086:2992] type 00 class 0x030000
>
> [    0.276689] pci 0000:00:02.0: reg 0x10: [mem 0xffa00000-0xffafffff]
>
> [    0.276705] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff
> 64bit pref]
>
> [    0.276710] pci 0000:00:02.0: reg 0x20: [io  0xec00-0xec07]
>
> [    0.276829] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
>
> [    0.276873] pci 0000:00:1a.0: reg 0x20: [io  0xe000-0xe01f]
>
> [    0.277017] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
>
> [    0.277023] pci 0000:00:1a.1: reg 0x20: [io  0xdc00-0xdc1f]
>
> [    0.277130] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
>
> [    0.277159] pci 0000:00:1a.7: reg 0x10: [mem 0xff9fb400-0xff9fb7ff]
>
> [    0.277223] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>
> [    0.277312] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
>
> [    0.277340] pci 0000:00:1b.0: reg 0x10: [mem 0xff9f4000-0xff9f7fff
> 64bit]
>
> [    0.277391] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>
> [    0.277473] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
>
> [    0.277536] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>
> [    0.277624] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
>
> [    0.277688] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>
> [    0.277778] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
>
> [    0.277821] pci 0000:00:1d.0: reg 0x20: [io  0xd880-0xd89f]
>
> [    0.277920] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
>
> [    0.277963] pci 0000:00:1d.1: reg 0x20: [io  0xd800-0xd81f]
>
> [    0.278070] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
>
> [    0.278114] pci 0000:00:1d.2: reg 0x20: [io  0xd480-0xd49f]
>
> [    0.278222] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
>
> [    0.278252] pci 0000:00:1d.7: reg 0x10: [mem 0xff9fb000-0xff9fb3ff]
>
> [    0.278316] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>
> [    0.278400] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
>
> [    0.278535] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100
>
> [    0.278620] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by
> ICH6 ACPI/GPIO/TCO
>
> [    0.278625] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by
> ICH6 GPIO
>
> [    0.278629] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at
> 0a00 (mask 00ff)
>
> [    0.278732] pci 0000:00:1f.2: [8086:2821] type 00 class 0x010601
>
> [    0.278759] pci 0000:00:1f.2: reg 0x10: [io  0xe880-0xe887]
>
> [    0.278766] pci 0000:00:1f.2: reg 0x14: [io  0xe800-0xe803]
>
> [    0.278774] pci 0000:00:1f.2: reg 0x18: [io  0xe480-0xe487]
>
> [    0.278782] pci 0000:00:1f.2: reg 0x1c: [io  0xe400-0xe403]
>
> [    0.278789] pci 0000:00:1f.2: reg 0x20: [io  0xe080-0xe09f]
>
> [    0.278797] pci 0000:00:1f.2: reg 0x24: [mem 0xff9fb800-0xff9fbfff]
>
> [    0.278825] pci 0000:00:1f.2: PME# supported from D3hot
>
> [    0.278907] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
>
> [    0.278920] pci 0000:00:1f.3: reg 0x10: [mem 0xff9fac00-0xff9facff]
>
> [    0.278950] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
>
> [    0.279124] pci 0000:01:00.0: [11ab:4362] type 00 class 0x020000
>
> [    0.279168] pci 0000:01:00.0: reg 0x10: [mem 0xff6fc000-0xff6fffff
> 64bit]
>
> [    0.279180] pci 0000:01:00.0: reg 0x18: [io  0xb800-0xb8ff]
>
> [    0.279221] pci 0000:01:00.0: reg 0x30: [mem 0xff6c0000-0xff6dffff pref]
>
> [    0.279262] pci 0000:01:00.0: supports D1 D2
>
> [    0.279264] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>
> [    0.279317] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.
> You can enable it with 'pcie_aspm=force'
>
> [    0.279328] pci 0000:00:1c.0: PCI bridge to [bus 01]
>
> [    0.279332] pci 0000:00:1c.0:   bridge window [io  0xb000-0xbfff]
>
> [    0.279336] pci 0000:00:1c.0:   bridge window [mem
> 0xff600000-0xff6fffff]
>
> [    0.279410] pci 0000:02:00.0: [11ab:4362] type 00 class 0x020000
>
> [    0.279454] pci 0000:02:00.0: reg 0x10: [mem 0xff7fc000-0xff7fffff
> 64bit]
>
> [    0.279466] pci 0000:02:00.0: reg 0x18: [io  0xc800-0xc8ff]
>
> [    0.279506] pci 0000:02:00.0: reg 0x30: [mem 0xff7c0000-0xff7dffff pref]
>
> [    0.279548] pci 0000:02:00.0: supports D1 D2
>
> [    0.279550] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>
> [    0.279599] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.
> You can enable it with 'pcie_aspm=force'
>
> [    0.279609] pci 0000:00:1c.1: PCI bridge to [bus 02]
>
> [    0.279613] pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
>
> [    0.279618] pci 0000:00:1c.1:   bridge window [mem
> 0xff700000-0xff7fffff]
>
> [    0.279706] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive
> decode)
>
> [    0.279715] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7
> window] (subtractive decode)
>
> [    0.279718] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff
> window] (subtractive decode)
>
> [    0.279720] pci 0000:00:1e.0:   bridge window [mem
> 0x000a0000-0x000bffff window] (subtractive decode)
>
> [    0.279723] pci 0000:00:1e.0:   bridge window [mem
> 0x000d0000-0x000dffff window] (subtractive decode)
>
> [    0.279725] pci 0000:00:1e.0:   bridge window [mem
> 0xaff00000-0xffffffff window] (subtractive decode)
>
> [    0.279740] pci_bus 0000:00: on NUMA node 0
>
> [    0.280490] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12
> 14 15)
>
> [    0.280545] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12
> 14 15)
>
> [    0.280598] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12
> *14 15)
>
> [    0.280651] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12
> 14 15)
>
> [    0.280713] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12
> 14 15) *0, disabled.
>
> [    0.280766] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12
> 14 *15)
>
> [    0.280819] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12
> 14 15)
>
> [    0.280871] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12
> 14 15)
>
> [    0.280925] ACPI: Enabled 2 GPEs in block 00 to 1F
>
> [    0.281098] SCSI subsystem initialized
>
> [    0.281130] libata version 3.00 loaded.
>
> [    0.281137] ACPI: bus type USB registered
>
> [    0.281175] usbcore: registered new interface driver usbfs
>
> [    0.281190] usbcore: registered new interface driver hub
>
> [    0.281211] usbcore: registered new device driver usb
>
> [    0.281255] pps_core: LinuxPPS API ver. 1 registered
>
> [    0.281256] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
> Rodolfo Giometti <giometti@linux.it>
>
> [    0.281266] PTP clock support registered
>
> [    0.281307] Advanced Linux Sound Architecture Driver Initialized.
>
> [    0.281307] PCI: Using ACPI for IRQ routing
>
> [    0.281307] PCI: pci_cache_line_size set to 64 bytes
>
> [    0.281307] Expanded resource reserved due to conflict with PCI Bus
> 0000:00
>
> [    0.281307] e820: reserve RAM buffer [mem 0x0009cc00-0x0009ffff]
>
> [    0.281307] e820: reserve RAM buffer [mem 0xafeb0000-0xafffffff]
>
> [    0.281517] Bluetooth: Core ver 2.21
>
> [    0.281534] NET: Registered protocol family 31
>
> [    0.281536] Bluetooth: HCI device and connection manager initialized
>
> [    0.281540] Bluetooth: HCI socket layer initialized
>
> [    0.281543] Bluetooth: L2CAP socket layer initialized
>
> [    0.281551] Bluetooth: SCO socket layer initialized
>
> [    0.282186] clocksource: Switched to clocksource refined-jiffies
>
> [    0.282299] FS-Cache: Loaded
>
> [    0.282369] pnp: PnP ACPI init
>
> [    0.282461] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
>
> [    0.282465] system 00:00: Plug and Play ACPI device, IDs PNP0c01
> (active)
>
> [    0.282547] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
>
> [    0.282616] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b
> (active)
>
> [    0.282829] pnp 00:03: [dma 0 disabled]
>
> [    0.282903] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
>
> [    0.283151] pnp 00:04: [dma 0 disabled]
>
> [    0.283244] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
>
> [    0.283542] system 00:05: [io 0x0a00-0x0a0f] has been reserved
>
> [    0.283545] system 00:05: [io 0x0a10-0x0a1f] has been reserved
>
> [    0.283548] system 00:05: Plug and Play ACPI device, IDs PNP0c02
> (active)
>
> [    0.283692] system 00:06: [io 0x04d0-0x04d1] has been reserved
>
> [    0.283695] system 00:06: [io 0x0800-0x087f] has been reserved
>
> [    0.283698] system 00:06: [io 0x0480-0x04bf] has been reserved
>
> [    0.283701] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
>
> [    0.283704] system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved
>
> [    0.283707] system 00:06: Plug and Play ACPI device, IDs PNP0c02
> (active)
>
> [    0.283832] system 00:07: [mem 0xffc00000-0xffefffff] has been reserved
>
> [    0.283836] system 00:07: Plug and Play ACPI device, IDs PNP0c02
> (active)
>
> [    0.283933] system 00:08: [mem 0xfec00000-0xfec00fff] could not be
> reserved
>
> [    0.283936] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
>
> [    0.283939] system 00:08: Plug and Play ACPI device, IDs PNP0c02
> (active)
>
> [    0.284038] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
>
> [    0.284042] system 00:09: Plug and Play ACPI device, IDs PNP0c02
> (active)
>
> [    0.284235] system 00:0a: [mem 0x00000000-0x0009ffff] could not be
> reserved
>
> [    0.284238] system 00:0a: [mem 0x000c0000-0x000cffff] could not be
> reserved
>
> [    0.284241] system 00:0a: [mem 0x000e0000-0x000fffff] could not be
> reserved
>
> [    0.284244] system 00:0a: [mem 0x00100000-0xafefffff] could not be
> reserved
>
> [    0.284247] system 00:0a: Plug and Play ACPI device, IDs PNP0c01
> (active)
>
> [    0.284367] pnp: PnP ACPI: found 11 devices
>
> [    0.292469] clocksource: acpi_pm: mask: 0xffffff max_cycles:
> 0xffffff, max_idle_ns: 2085701024 ns
>
> [    0.292493] clocksource: Switched to clocksource acpi_pm
>
> [    0.292511] pci 0000:00:1c.0: bridge window [mem
> 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align
> 100000
>
> [    0.292520] pci 0000:00:1c.1: bridge window [mem
> 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align
> 100000
>
> [    0.292530] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit
> pref] res_to_dev_res add_size 200000 min_align 100000
>
> [    0.292533] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x002fffff 64bit
> pref] res_to_dev_res add_size 200000 min_align 100000
>
> [    0.292536] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit
> pref] res_to_dev_res add_size 200000 min_align 100000
>
> [    0.292539] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x002fffff 64bit
> pref] res_to_dev_res add_size 200000 min_align 100000
>
> [    0.292547] pci 0000:00:1c.0: BAR 9: assigned [mem
> 0xb0000000-0xb01fffff 64bit pref]
>
> [    0.292552] pci 0000:00:1c.1: BAR 9: assigned [mem
> 0xb0200000-0xb03fffff 64bit pref]
>
> [    0.292555] pci 0000:00:1c.0: PCI bridge to [bus 01]
>
> [    0.292559] pci 0000:00:1c.0:   bridge window [io  0xb000-0xbfff]
>
> [    0.292563] pci 0000:00:1c.0:   bridge window [mem
> 0xff600000-0xff6fffff]
>
> [    0.292568] pci 0000:00:1c.0:   bridge window [mem
> 0xb0000000-0xb01fffff 64bit pref]
>
> [    0.292573] pci 0000:00:1c.1: PCI bridge to [bus 02]
>
> [    0.292576] pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
>
> [    0.292581] pci 0000:00:1c.1:   bridge window [mem
> 0xff700000-0xff7fffff]
>
> [    0.292585] pci 0000:00:1c.1:   bridge window [mem
> 0xb0200000-0xb03fffff 64bit pref]
>
> [    0.292591] pci 0000:00:1e.0: PCI bridge to [bus 03]
>
> [    0.292601] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
>
> [    0.292603] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
>
> [    0.292606] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff
> window]
>
> [    0.292608] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff
> window]
>
> [    0.292611] pci_bus 0000:00: resource 8 [mem 0xaff00000-0xffffffff
> window]
>
> [    0.292613] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
>
> [    0.292616] pci_bus 0000:01: resource 1 [mem 0xff600000-0xff6fffff]
>
> [    0.292618] pci_bus 0000:01: resource 2 [mem 0xb0000000-0xb01fffff
> 64bit pref]
>
> [    0.292620] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
>
> [    0.292623] pci_bus 0000:02: resource 1 [mem 0xff700000-0xff7fffff]
>
> [    0.292625] pci_bus 0000:02: resource 2 [mem 0xb0200000-0xb03fffff
> 64bit pref]
>
> [    0.292628] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
>
> [    0.292630] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
>
> [    0.292632] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff
> window]
>
> [    0.292635] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff
> window]
>
> [    0.292637] pci_bus 0000:03: resource 8 [mem 0xaff00000-0xffffffff
> window]
>
> [    0.292667] NET: Registered protocol family 2
>
> [    0.292840] TCP established hash table entries: 65536 (order: 7,
> 524288 bytes)
>
> [    0.292996] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>
> [    0.292996] TCP: Hash tables configured (established 65536 bind 65536)
>
> [    0.292996] UDP hash table entries: 4096 (order: 5, 131072 bytes)
>
> [    0.292996] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
>
> [    0.292996] NET: Registered protocol family 1
>
> [    0.293156] RPC: Registered named UNIX socket transport module.
>
> [    0.293158] RPC: Registered udp transport module.
>
> [    0.293159] RPC: Registered tcp transport module.
>
> [    0.293160] RPC: Registered tcp NFSv4.1 backchannel transport module.
>
> [    0.293173] pci 0000:00:02.0: Video device with shadowed ROM
>
> [    1.393031] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?)
> 01010001
>
> [    1.393628] PCI: CLS 32 bytes, default 64
>
> [    1.393679] Unpacking initramfs...
>
> [    2.059003] Freeing initrd memory: 4484K
>
> [    2.059042] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>
> [    2.059045] software IO TLB: mapped [mem 0xabeb0000-0xafeb0000] (64MB)
>
> [    2.060866] audit: initializing netlink subsys (disabled)
>
> [    2.060882] audit: type=2000 audit(1656560745.059:1): initialized
>
> [    2.069056] VFS: Disk quotas dquot_6.6.0
>
> [    2.069111] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
> bytes)
>
> [    2.078991] NFS: Registering the id_resolver key type
>
> [    2.079000] Key type id_resolver registered
>
> [    2.079039] Key type id_legacy registered
>
> [    2.079044] Installing knfsd (copyright (C) 1996okir@monad.swb.de).
>
> [    2.082125] Key type cifs.spnego registered
>
> [    2.082132] Key type cifs.idmap registered
>
> [    2.082186] fuse init (API version 7.23)
>
> [    2.084994] NET: Registered protocol family 38
>
> [    2.085013] async_tx: api initialized (async)
>
> [    2.085146] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 251)
>
> [    2.085216] io scheduler noop registered
>
> [    2.085221] io scheduler deadline registered
>
> [    2.085290] io scheduler cfq registered (default)
>
> [    2.085374] io scheduler bfq registered
>
> [    2.085376] BFQ I/O-scheduler: v7r11
>
> [    2.085432] gpio_it87: no device
>
> [    2.089082] intel_idle: does not run on family 6 model 15
>
> [    2.089186] input: Power Button as
> /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
>
> [    2.089190] ACPI: Power Button [PWRB]
>
> [    2.089249] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
>
> [    2.089252] ACPI: Power Button [PWRF]
>
> [    2.089534] ioatdma: Intel(R) QuickData Technology Driver 4.00
>
> [    2.089655] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>
> [    2.110208] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
> is a 16550A
>
> [    2.130803] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200)
> is a 16550A
>
> [    2.131235] Linux agpgart interface v0.103
>
> [    2.131278] agpgart-intel 0000:00:00.0: Intel 965Q Chipset
>
> [    2.131297] agpgart-intel 0000:00:00.0: detected gtt size: 524288K
> total, 262144K mappable
>
> [    2.132491] agpgart-intel 0000:00:00.0: detected 1024K stolen memory
>
> [    2.132612] agpgart-intel 0000:00:00.0: AGP aperture is 256M @
> 0xd0000000
>
> [    2.132686] [drm] Initialized drm 1.1.0 20060810
>
> [    2.133252] [drm] Memory usable by graphics device = 512M
>
> [    2.133255] [drm] Replacing VGA console driver
>
> [    2.133961] Console: switching to colour dummy device 80x25
>
> [    2.134000] pmd_set_huge: Cannot satisfy [mem 0xd0000000-0xd0200000]
> with a huge-page mapping due to MTRR override.
>
> [    2.140246] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
>
> [    2.140247] [drm] Driver supports precise vblank timestamp query.
>
> [    2.148755] [drm] initialized overlay support
>
> [    2.148812] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on
> minor 0
>
> [    2.152183] loop: module loaded
>
> [    2.152451] gpio_ich: GPIO from 462 to 511 on gpio_ich
>
> [    2.152569] mpt3sas version 12.100.00.00 loaded
>
> [    2.154374] ahci 0000:00:1f.2: version 3.0
>
> [    2.154564] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
>
> [    2.154596] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps
> 0x3f impl SATA mode
>
> [    2.154600] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo
> pio slum part ccc ems sxs
>
> [    2.154644] do_marvell_9170_recover: ignoring PCI device (8086:2821)
> at PCI#0
>
> [    2.154685] do_marvell_9170_recover: ignoring PCI device (8086:2821)
> at PCI#0
>
> [    2.156066] do_marvell_9170_recover: ignoring PCI device (8086:2821)
> at PCI#0
>
> [    2.158079] do_marvell_9170_recover: ignoring PCI device (8086:2821)
> at PCI#0
>
> [    2.160076] do_marvell_9170_recover: ignoring PCI device (8086:2821)
> at PCI#0
>
> [    2.162081] do_marvell_9170_recover: ignoring PCI device (8086:2821)
> at PCI#0
>
> [    2.167109] scsi host0: ahci
>
> [    2.167359] scsi host1: ahci
>
> [    2.168197] scsi host2: ahci
>
> [    2.168304] scsi host3: ahci
>
> [    2.169170] scsi host4: ahci
>
> [    2.169281] scsi host5: ahci
>
> [    2.169346] ata1: SATA max UDMA/133 abar m2048@0xff9fb800 port
> 0xff9fb900 irq 25
>
> [    2.169348] ata2: SATA max UDMA/133 abar m2048@0xff9fb800 port
> 0xff9fb980 irq 25
>
> [    2.169351] ata3: SATA max UDMA/133 abar m2048@0xff9fb800 port
> 0xff9fba00 irq 25
>
> [    2.169353] ata4: SATA max UDMA/133 abar m2048@0xff9fb800 port
> 0xff9fba80 irq 25
>
> [    2.169355] ata5: SATA max UDMA/133 abar m2048@0xff9fb800 port
> 0xff9fbb00 irq 25
>
> [    2.169358] ata6: SATA max UDMA/133 abar m2048@0xff9fb800 port
> 0xff9fbb80 irq 25
>
> [    2.169572] Rounding down aligned max_sectors from 4294967295 to
> 4294967288
>
> [    2.169676] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
>
> [    2.169699] tun: Universal TUN/TAP device driver, 1.6
>
> [    2.169700] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>
> [    2.169756] e1000: Intel(R) PRO/1000 Network Driver - version
> 7.3.21-k8-NAPI
>
> [    2.169758] e1000: Copyright (c) 1999-2006 Intel Corporation.
>
> [    2.169779] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
>
> [    2.169781] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
>
> [    2.169804] igb: Intel(R) Gigabit Ethernet Network Driver - version
> 5.3.0-k
>
> [    2.169806] igb: Copyright (c) 2007-2014 Intel Corporation.
>
> [    2.169825] Intel(R) 10GbE PCI Express Linux Network Driver - version
> 5.3.8
>
> [    2.169827] Copyright(c) 1999 - 2018 Intel Corporation.
>
> [    2.169874] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network
> Driver - version 2.4.10
>
> [    2.169876] i40e: Copyright(c) 2013 - 2018 Intel Corporation.
>
> [    2.169922] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver
> bnx2x 1.712.30-0 (2014/02/10)
>
> [    2.170073] sk98lin: Network Device Driver v10.93.3.3
>
> (C)Copyright 1999-2012 Marvell(R).
>
> [    2.224898] eth0: Marvell Yukon 88E8053 Gigabit Ethernet Controller
>
> [    2.279721] eth1: Marvell Yukon 88E8053 Gigabit Ethernet Controller
>
> [    2.279746] Fusion MPT base driver 3.04.20
>
> [    2.279747] Copyright (c) 1999-2008 LSI Corporation
>
> [    2.279755] Fusion MPT SAS Host driver 3.04.20
>
> [    2.279781] Fusion MPT misc device (ioctl) driver 3.04.20
>
> [    2.279829] mptctl: Registered with Fusion MPT base driver
>
> [    2.279831] mptctl: /dev/mptctl @ (major,minor=10,220)
>
> [    2.279835] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>
> [    2.279841] ehci-pci: EHCI PCI platform driver
>
> [    2.279946] ehci-pci 0000:00:1a.7: EHCI Host Controller
>
> [    2.279954] ehci-pci 0000:00:1a.7: new USB bus registered, assigned
> bus number 1
>
> [    2.279966] ehci-pci 0000:00:1a.7: debug port 1
>
> [    2.283872] ehci-pci 0000:00:1a.7: cache line size of 32 is not
> supported
>
> [    2.283885] ehci-pci 0000:00:1a.7: irq 18, io mem 0xff9fb400
>
> [    2.289048] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>
> [    2.289291] hub 1-0:1.0: USB hub found
>
> [    2.289303] hub 1-0:1.0: 4 ports detected
>
> [    2.289515] ehci-pci 0000:00:1d.7: EHCI Host Controller
>
> [    2.289521] ehci-pci 0000:00:1d.7: new USB bus registered, assigned
> bus number 2
>
> [    2.289531] ehci-pci 0000:00:1d.7: debug port 1
>
> [    2.293424] ehci-pci 0000:00:1d.7: cache line size of 32 is not
> supported
>
> [    2.293436] ehci-pci 0000:00:1d.7: irq 23, io mem 0xff9fb000
>
> [    2.299045] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>
> [    2.299286] hub 2-0:1.0: USB hub found
>
> [    2.299295] hub 2-0:1.0: 6 ports detected
>
> [    2.299460] uhci_hcd: USB Universal Host Controller Interface driver
>
> [    2.299543] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>
> [    2.299550] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
> bus number 3
>
> [    2.299556] uhci_hcd 0000:00:1a.0: detected 2 ports
>
> [    2.299581] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000
>
> [    2.299774] hub 3-0:1.0: USB hub found
>
> [    2.299797] hub 3-0:1.0: 2 ports detected
>
> [    2.299951] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>
> [    2.299958] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
> bus number 4
>
> [    2.299964] uhci_hcd 0000:00:1a.1: detected 2 ports
>
> [    2.299987] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000dc00
>
> [    2.300183] hub 4-0:1.0: USB hub found
>
> [    2.300208] hub 4-0:1.0: 2 ports detected
>
> [    2.300388] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>
> [    2.300395] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
> bus number 5
>
> [    2.300401] uhci_hcd 0000:00:1d.0: detected 2 ports
>
> [    2.300418] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
>
> [    2.300584] hub 5-0:1.0: USB hub found
>
> [    2.300607] hub 5-0:1.0: 2 ports detected
>
> [    2.300751] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>
> [    2.300758] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
> bus number 6
>
> [    2.300764] uhci_hcd 0000:00:1d.1: detected 2 ports
>
> [    2.300787] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
>
> [    2.300975] hub 6-0:1.0: USB hub found
>
> [    2.301018] hub 6-0:1.0: 2 ports detected
>
> [    2.301173] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>
> [    2.301180] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
> bus number 7
>
> [    2.301186] uhci_hcd 0000:00:1d.2: detected 2 ports
>
> [    2.301204] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480
>
> [    2.301385] hub 7-0:1.0: USB hub found
>
> [    2.301413] hub 7-0:1.0: 2 ports detected
>
> [    2.301584] usbcore: registered new interface driver cdc_acm
>
> [    2.301586] cdc_acm: USB Abstract Control Model driver for USB modems
> and ISDN adapters
>
> [    2.301607] usbcore: registered new interface driver usblp
>
> [    2.301643] usbcore: registered new interface driver usb-storage
>
> [    2.301691] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64
> irq 1
>
> [    2.301693] i8042: PNP: PS/2 appears to have AUX port disabled, if
> this is incorrect please boot with i8042.nopnp
>
> [    2.302419] serio: i8042 KBD port at 0x60,0x64 irq 1
>
> [    2.303448] rtc_cmos 00:01: RTC can wake from S4
>
> [    2.303609] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>
> [    2.303630] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
>
> [    2.303644] i2c /dev entries driver
>
> [    2.304042] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
>
> [    2.306134] coretemp coretemp.0: Using relative temperature scale!
>
> [    2.306150] coretemp coretemp.0: Using relative temperature scale!
>
> [    2.306163] coretemp coretemp.0: Using relative temperature scale!
>
> [    2.306178] coretemp coretemp.0: Using relative temperature scale!
>
> [    2.306289] w83627ehf: Found W83627DHG chip at 0xa10
>
> [    2.306670] md: raid0 personality registered for level 0
>
> [    2.306674] md: raid1 personality registered for level 1
>
> [    2.306677] md: raid10 personality registered for level 10
>
> [    2.309405] md: raid6 personality registered for level 6
>
> [    2.309409] md: raid5 personality registered for level 5
>
> [    2.309411] md: raid4 personality registered for level 4
>
> [    2.309604] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28)
> initialised:dm-devel@redhat.com
>
> [    2.310108] usbcore: registered new interface driver btusb
>
> [    2.310189] usbcore: registered new interface driver usbhid
>
> [    2.310190] usbhid: USB HID core driver
>
> [    2.310452] ip_tables: (C) 2000-2006 Netfilter Core Team
>
> [    2.310829] NET: Registered protocol family 10
>
> [    2.311209] NET: Registered protocol family 17
>
> [    2.311233] 8021q: 802.1Q VLAN Support v1.8
>
> [    2.311248] Key type dns_resolver registered
>
> [    2.311447] readynas_io_init: initializing ReadyNAS I/O.
>
> [    2.311449] procfs_init: initializing ReadyNAS procfs.
>
> [    2.311455] ReadyNAS model: To Be Filled By O.E.M.
>
> [    2.311483] pwr_button_state_init: initializing ReadyNAS PWR button
> state handler .
>
> [    2.311489] button_init: initializing ReadyNAS button set.
>
> [    2.311492] __button_init: button 'backup' gpio_ich:15 (POLL)
>
> [    2.311502] __button_init: button 'reset' gpio_ich:8 (POLL)
>
> [    2.312880] input: rn_button as /devices/virtual/input/input3
>
> [    2.312938] readynas_io_init: initialization successfully completed.
>
> [    2.313019] readynas_lcd_init: installing ReadyNAS LCD driver.
>
> [    2.313087] readynas_led_init: installing ReadyNAS LED driver.
>
> [    2.314957] register_led: registering LED "readynas:green:backup"
>
> [    2.315213] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb6
>
> [    2.315222] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb6
>
> [    2.315231] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb6
>
> [    2.315239] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb6
>
> [    2.315305] microcode: Microcode Update Driver: v2.01
> <tigran@aivazian.fsnet.co.uk>, Peter Oruba
>
> [    2.315516] registered taskstats version 1
>
> [    2.318139] Btrfs loaded, crc32c=crc32c-generic
>
> [    2.319040] hdaudio hdaudioC0D0: Unable to bind the codec
>
> [    2.324456] rtc_cmos 00:01: setting system clock to 2022-06-30
> 03:45:45 UTC (1656560745)
>
> [    2.324599] ALSA device list:
>
> [    2.324602]   No soundcards found.
>
> [    2.474033] do_marvell_9170_recover: ignoring PCI device (8086:2821)
> at PCI#0
>
> [    2.474044] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>
> [    2.474590] ata1.00: ATA-9: WDC WD30EFRX-68EUZN0, 80.00A80, max UDMA/133
>
> [    2.474594] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth
> 31/32), AA
>
> [    2.475220] ata1.00: configured for UDMA/133
>
> [    2.475452] scsi 0:0:0:0: Direct-Access     ATA      WDC WD30EFRX-68E
> 0A80 PQ: 0 ANSI: 5
>
> [    2.475760] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks:
> (3.00 TB/2.73 TiB)
>
> [    2.475763] sd 0:0:0:0: [sda] 4096-byte physical blocks
>
> [    2.475815] sd 0:0:0:0: [sda] Write Protect is off
>
> [    2.475819] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>
> [    2.475841] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
>
> [    2.476084] sd 0:0:0:0: Attached scsi generic sg0 type 0
>
> [    2.522051]  sda: sda1 sda2 sda3
>
> [    2.522379] sd 0:0:0:0: [sda] Attached SCSI disk
>
> [    2.601041] usb 2-1: new high-speed USB device number 2 using ehci-pci
>
> [    2.717033] usb-storage 2-1:1.0: USB Mass Storage device detected
>
> [    2.717115] usb-storage 2-1:1.0: Quirks match for vid 090c pid 1000: 400
>
> [    2.717139] scsi host6: usb-storage 2-1:1.0
>
> [    2.781032] do_marvell_9170_recover: ignoring PCI device (8086:2821)
> at PCI#0
>
> [    2.781042] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>
> [    2.795031] ata2.00: ATA-11: ST4000NE001-2MA101, EN01, max UDMA/133
>
> [    2.795035] ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth
> 31/32), AA
>
> [    2.808741] ata2.00: configured for UDMA/133
>
> [    2.808933] scsi 1:0:0:0: Direct-Access     ATA      ST4000NE001-2MA1
> EN01 PQ: 0 ANSI: 5
>
> [    2.809213] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks:
> (4.00 TB/3.64 TiB)
>
> [    2.809216] sd 1:0:0:0: [sdb] 4096-byte physical blocks
>
> [    2.809267] sd 1:0:0:0: [sdb] Write Protect is off
>
> [    2.809270] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>
> [    2.809292] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
>
> [    2.809375] sd 1:0:0:0: Attached scsi generic sg1 type 0
>
> [    2.847249]  sdb: sdb1 sdb2 sdb3 sdb4
>
> [    2.847649] sd 1:0:0:0: [sdb] Attached SCSI disk
>
> [    3.061040] tsc: Refined TSC clocksource calibration: 2659.998 MHz
>
> [    3.061046] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
> 0x2657a1d9103, max_idle_ns: 440795229008 ns
>
> [    3.114032] do_marvell_9170_recover: ignoring PCI device (8086:2821)
> at PCI#0
>
> [    3.114043] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>
> [    3.128035] ata3.00: ATA-11: ST4000NE001-2MA101, EN01, max UDMA/133
>
> [    3.128040] ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth
> 31/32), AA
>
> [    3.141737] ata3.00: configured for UDMA/133
>
> [    3.141929] scsi 2:0:0:0: Direct-Access     ATA      ST4000NE001-2MA1
> EN01 PQ: 0 ANSI: 5
>
> [    3.142203] sd 2:0:0:0: [sdc] 7814037168 512-byte logical blocks:
> (4.00 TB/3.64 TiB)
>
> [    3.142207] sd 2:0:0:0: [sdc] 4096-byte physical blocks
>
> [    3.142258] sd 2:0:0:0: [sdc] Write Protect is off
>
> [    3.142261] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>
> [    3.142284] sd 2:0:0:0: [sdc] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
>
> [    3.142475] sd 2:0:0:0: Attached scsi generic sg2 type 0
>
> [    3.185724]  sdc: sdc1 sdc2 sdc3 sdc4
>
> [    3.186153] sd 2:0:0:0: [sdc] Attached SCSI disk
>
> [    3.394037] usb 6-1: new full-speed USB device number 2 using uhci_hcd
>
> [    3.447032] do_marvell_9170_recover: ignoring PCI device (8086:2821)
> at PCI#0
>
> [    3.447043] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>
> [    3.447587] ata4.00: ATA-10: WDC WD40EFRX-68N32N0, 82.00A82, max
> UDMA/133
>
> [    3.447591] ata4.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth
> 31/32), AA
>
> [    3.448159] ata4.00: configured for UDMA/133
>
> [    3.448410] scsi 3:0:0:0: Direct-Access     ATA      WDC WD40EFRX-68N
> 0A82 PQ: 0 ANSI: 5
>
> [    3.448789] sd 3:0:0:0: [sdd] 7814037168 512-byte logical blocks:
> (4.00 TB/3.64 TiB)
>
> [    3.448792] sd 3:0:0:0: [sdd] 4096-byte physical blocks
>
> [    3.448847] sd 3:0:0:0: [sdd] Write Protect is off
>
> [    3.448850] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
>
> [    3.448873] sd 3:0:0:0: [sdd] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
>
> [    3.449186] sd 3:0:0:0: Attached scsi generic sg3 type 0
>
> [    3.493627]  sdd: sdd1 sdd2 sdd3 sdd4
>
> [    3.494094] sd 3:0:0:0: [sdd] Attached SCSI disk
>
> [    3.754033] do_marvell_9170_recover: ignoring PCI device (8086:2821)
> at PCI#0
>
> [    3.754044] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>
> [    3.754592] ata5.00: ATA-10: WDC WD40EFRX-68N32N0, 82.00A82, max
> UDMA/133
>
> [    3.754597] ata5.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth
> 31/32), AA
>
> [    3.755175] ata5.00: configured for UDMA/133
>
> [    3.755334] scsi 4:0:0:0: Direct-Access     ATA      WDC WD40EFRX-68N
> 0A82 PQ: 0 ANSI: 5
>
> [    3.755709] sd 4:0:0:0: [sde] 7814037168 512-byte logical blocks:
> (4.00 TB/3.64 TiB)
>
> [    3.755712] sd 4:0:0:0: [sde] 4096-byte physical blocks
>
> [    3.755764] sd 4:0:0:0: [sde] Write Protect is off
>
> [    3.755767] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
>
> [    3.755790] sd 4:0:0:0: [sde] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
>
> [    3.756074] sd 4:0:0:0: Attached scsi generic sg4 type 0
>
> [    3.794711]  sde: sde1 sde2 sde3 sde4
>
> [    3.795199] sd 4:0:0:0: [sde] Attached SCSI disk
>
> [    3.834190] hid-generic 0003:051D:0002.0001: hiddev0: USB HID v1.00
> Device [American Power Conversion Back-UPS RS 1500MS FW:952.e3 .D USB
> FW:e3     ] on usb-0000:00:1d.1-1/input0
>
> [    4.061032] do_marvell_9170_recover: ignoring PCI device (8086:2821)
> at PCI#0
>
> [    4.061044] ata6: SATA link down (SStatus 0 SControl 300)
>
> [    4.061652] Freeing unused kernel memory: 872K
>
> [    4.061670] clocksource: Switched to clocksource tsc
>
> [    4.064542] vpd: loading out-of-tree module taints kernel.
>
> [    4.064547] vpd: module license 'Proprietary' taints kernel.
>
> [    4.064549] Disabling lock debugging due to kernel taint
>
> [    4.064661] ReadyNAS VPD init
>
> [    7.631092] nv6lcd v3.1 loaded.
>
> [    7.727886] scsi 6:0:0:0: Direct-Access     SMI      USB DISK 1100
> PQ: 0 ANSI: 0 CCS
>
> [    7.728297] sd 6:0:0:0: Attached scsi generic sg5 type 0
>
> [    7.728300] sd 6:0:0:0: Embedded Enclosure Device
>
> [    7.729368] sd 6:0:0:0: Wrong diagnostic page; asked for 1 got 0
>
> [    7.729747] sd 6:0:0:0: [sdf] 250880 512-byte logical blocks: (128
> MB/123 MiB)
>
> [    7.730615] sd 6:0:0:0: [sdf] Write Protect is off
>
> [    7.730617] sd 6:0:0:0: [sdf] Mode Sense: 43 00 00 00
>
> [    7.731489] sd 6:0:0:0: [sdf] No Caching mode page found
>
> [    7.731490] sd 6:0:0:0: [sdf] Assuming drive cache: write through
>
> [    7.735123]  sdf: sdf1
>
> [    7.737365] sd 6:0:0:0: [sdf] Attached SCSI removable disk
>
> [    7.746853] sd 6:0:0:0: Failed to get diagnostic page 0xffffffea
>
> [    7.752858] sd 6:0:0:0: Failed to bind enclosure -19
>
> [   20.336052] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>
> [   20.338949] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
>
> [   21.359543] random: nonblocking pool is initialized
>
> [   22.700903] eth1: network connection up using port A
>
> [   22.700903]     interrupt src:   MSI
>
> [   22.700903]     speed:           1000
>
> [   22.700903]     autonegotiation: yes
>
> [   22.700903]     duplex mode:     full
>
> [   22.700903]     flowctrl:        none
>
> [   22.700903]     role:            slave
>
> [   22.700903]     tcp offload: enabled
>
> [   22.700903]     scatter-gather: enabled
>
> [   22.700903]     tx-checksum: enabled
>
> [   22.700903]     rx-checksum: enabled
>
> [   22.700903]     rx-polling: enabled
>
> [   22.700903] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>
> [   22.789894] eth0: network connection up using port A
>
> [   22.789894]     interrupt src:   MSI
>
> [   22.789894]     speed:           1000
>
> [   22.789894]     autonegotiation: yes
>
> [   22.789894]     duplex mode:     full
>
> [   22.789894]     flowctrl:        none
>
> [   22.789894]     role:            slave
>
> [   22.789894]     tcp offload: enabled
>
> [   22.789894]     scatter-gather: enabled
>
> [   22.789894]     tx-checksum: enabled
>
> [   22.789894]     rx-checksum: enabled
>
> [   22.789894]     rx-polling: enabled
>
> [   22.789894] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>
> [   29.469809] md: md0 stopped.
>
> [   29.470692] md: bind<sdb1>
>
> [   29.470859] md: bind<sdc1>
>
> [   29.470997] md: bind<sdd1>
>
> [   29.471172] md: bind<sde1>
>
> [   29.471295] md: bind<sda1>
>
> [   29.473870] md/raid1:md0: active with 5 out of 5 mirrors
>
> [   29.473956] md0: detected capacity change from 0 to 4290772992
>
> [   29.489973] md: md1 stopped.
>
> [   29.490924] md: bind<sdc2>
>
> [   29.491113] md: bind<sdd2>
>
> [   29.491258] md: bind<sde2>
>
> [   29.491440] md: bind<sdb2>
>
> [   29.491580] md: bind<sda2>
>
> [   29.492180] md/raid10:md1: active with 5 out of 5 devices
>
> [   29.492275] md1: detected capacity change from 0 to 1336934400
>
> [   29.902166] BTRFS: device label 33ea130b:root devid 1 transid 1525025
> /dev/md0
>
> [   29.902551] BTRFS info (device md0): has skinny extents
>
> [   30.813394] systemd[1]: Failed to insert module 'kdbus': Function not
> implemented
>
> [   30.816561] systemd[1]: systemd 230 running in system mode. (+PAM
> +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
> +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
>
> [   30.816755] systemd[1]: Detected architecture x86-64.
>
> [   30.821162] systemd[1]: Set hostname to <nas>.
>
> [   30.961126] systemd[1]: systemd-journald-audit.socket: Cannot add
> dependency job, ignoring: Unit systemd-journald-audit.socket is masked.
>
> [   30.961195] systemd[1]: systemd-journald-audit.socket: Cannot add
> dependency job, ignoring: Unit systemd-journald-audit.socket is masked.
>
> [   30.961958] systemd[1]: Set up automount Arbitrary Executable File
> Formats File System Automount Point.
>
> [   30.972146] systemd[1]: Created slice User and Session Slice.
>
> [   30.978124] systemd[1]: Listening on Journal Socket (/dev/log).
>
> [   30.984114] systemd[1]: Listening on udev Control Socket.
>
> [   30.990121] systemd[1]: Created slice System Slice.
>
> [   30.996083] systemd[1]: Reached target Slices.
>
> [   31.000064] systemd[1]: Reached target Remote File Systems (Pre).
>
> [   31.006129] systemd[1]: Created slice system-getty.slice.
>
> [   31.012137] systemd[1]: Started Forward Password Requests to Wall
> Directory Watch.
>
> [   31.021113] systemd[1]: Listening on /dev/initctl Compatibility Named
> Pipe.
>
> [   31.028127] systemd[1]: Listening on Journal Socket.
>
> [   31.039179] systemd[1]: Starting Create Static Device Nodes in /dev...
>
> [   31.045658] systemd[1]: Starting Journal Service...
>
> [   31.050823] systemd[1]: Starting Load Kernel Modules...
>
> [   31.055736] systemd[1]: Mounting POSIX Message Queue File System...
>
> [   31.061761] systemd[1]: Started ReadyNAS LCD splasher.
>
> [   31.067831] systemd[1]: Starting ReadyNASOS system prep...
>
> [   31.072107] systemd[1]: Reached target Remote File Systems.
>
> [   31.078136] systemd[1]: Listening on udev Kernel Socket.
>
> [   31.084181] systemd[1]: Created slice system-serial\x2dgetty.slice.
>
> [   31.099501] systemd[1]: Mounting Debug File System...
>
> [   31.104203] systemd[1]: Reached target Encrypted Volumes.
>
> [   31.111731] systemd[1]: Starting Remount Root and Kernel File Systems...
>
> [   31.118206] systemd[1]: Started Dispatch Password Requests to Console
> Directory Watch.
>
> [   31.127120] systemd[1]: Reached target Paths.
>
> [   31.141394] systemd[1]: Mounted Debug File System.
>
> [   31.146116] systemd[1]: Mounted POSIX Message Queue File System.
>
> [   31.152322] systemd[1]: Started Load Kernel Modules.
>
> [   31.158382] systemd[1]: Started Create Static Device Nodes in /dev.
>
> [   31.165420] systemd[1]: Started ReadyNASOS system prep.
>
> [   31.171379] systemd[1]: Started Remount Root and Kernel File Systems.
>
> [   31.185199] systemd[1]: Starting Load/Save Random Seed...
>
> [   31.190782] systemd[1]: Starting Rebuild Hardware Database...
>
> [   31.197725] systemd[1]: Starting udev Kernel Device Manager...
>
> [   31.203724] systemd[1]: Starting Apply Kernel Variables...
>
> [   31.208719] systemd[1]: Mounting FUSE Control File System...
>
> [   31.213707] systemd[1]: Mounting Configuration File System...
>
> [   31.219475] systemd[1]: Mounted FUSE Control File System.
>
> [   31.225160] systemd[1]: Mounted Configuration File System.
>
> [   31.231339] systemd[1]: Started Load/Save Random Seed.
>
> [   31.238326] systemd[1]: Started Apply Kernel Variables.
>
> [   31.306716] systemd[1]: Started udev Kernel Device Manager.
>
> [   31.322191] systemd[1]: Starting MD arrays...
>
> [   31.487875] systemd[1]: Started Journal Service.
>
> [   31.520876] systemd-journald[1420]: Received request to flush runtime
> journal from PID 1
>
> [   32.202932] md: md127 stopped.
>
> [   32.203990] md: bind<sdb3>
>
> [   32.204155] md: bind<sdc3>
>
> [   32.204286] md: bind<sdd3>
>
> [   32.204422] md: bind<sde3>
>
> [   32.204560] md: bind<sda3>
>
> [   32.217830] md/raid:md127: device sda3 operational as raid disk 0
>
> [   32.217835] md/raid:md127: device sde3 operational as raid disk 4
>
> [   32.217838] md/raid:md127: device sdd3 operational as raid disk 3
>
> [   32.217841] md/raid:md127: device sdc3 operational as raid disk 2
>
> [   32.217844] md/raid:md127: device sdb3 operational as raid disk 1
>
> [   32.218402] md/raid:md127: allocated 5418kB
>
> [   32.218445] md/raid:md127: raid level 5 active with 5 out of 5
> devices, algorithm 2
>
> [   32.218449] RAID conf printout:
>
> [   32.218451]  --- level:5 rd:5 wd:5
>
> [   32.218454]  disk 0, o:1, dev:sda3
>
> [   32.218457]  disk 1, o:1, dev:sdb3
>
> [   32.218460]  disk 2, o:1, dev:sdc3
>
> [   32.218463]  disk 3, o:1, dev:sdd3
>
> [   32.218471]  disk 4, o:1, dev:sde3
>
> [   32.218580] md127: detected capacity change from 0 to 11982507343872
>
> [   32.390150] Adding 1305596k swap on /dev/md1.  Priority:-1 extents:1
> across:1305596k
>
> [   32.568400] BTRFS: device label 33ea130b:data devid 1 transid 3240438
> /dev/md127
>
> [   32.795849] md: md126 stopped.
>
> [   32.796664] md: bind<sde4>
>
> [   32.796784] md: bind<sdc4>
>
> [   32.796900] md: bind<sdb4>
>
> [   32.797136] md: bind<sdd4>
>
> [   32.797897] md/raid:md126: device sdd4 operational as raid disk 0
>
> [   32.797901] md/raid:md126: device sdb4 operational as raid disk 3
>
> [   32.797903] md/raid:md126: device sdc4 operational as raid disk 2
>
> [   32.797904] md/raid:md126: device sde4 operational as raid disk 1
>
> [   32.798455] md/raid:md126: allocated 4362kB
>
> [   32.798760] md/raid:md126: raid level 5 active with 4 out of 4
> devices, algorithm 2
>
> [   32.798762] RAID conf printout:
>
> [   32.798764]  --- level:5 rd:4 wd:4
>
> [   32.798765]  disk 0, o:1, dev:sdd4
>
> [   32.798767]  disk 1, o:1, dev:sde4
>
> [   32.798769]  disk 2, o:1, dev:sdc4
>
> [   32.798771]  disk 3, o:1, dev:sdb4
>
> [   32.798854] md126: detected capacity change from 0 to 3000179490816
>
> [   32.905771] BTRFS: device label 33ea130b:data devid 2 transid 3240438
> /dev/md126
>
> [   33.189453] BTRFS info (device md126): has skinny extents
>
> [   35.277853] BTRFS critical (device md126): corrupt node: root=1
> block=13404298215424 slot=307, unaligned pointer, have
> 12567101254720864896 should be aligned to 4096
>
> [   35.298299] BTRFS critical (device md126): corrupt node: root=1
> block=13404298215424 slot=307, unaligned pointer, have
> 12567101254720864896 should be aligned to 4096
>
> [   35.298341] BTRFS error (device md126): failed to read block groups: -5
>
> [   35.299177] BTRFS error (device md126): failed to read block groups: -17
>
> [   35.379488] BTRFS error (device md126): failed to read block groups: -17
>
> [   35.445317] BTRFS error (device md126): failed to read block groups: -17
>
> [   35.708498] BTRFS error (device md126): failed to read block groups: -17
>
> [   35.729143] BTRFS error (device md126): open_ctree failed
>
> [   36.067098] bonding: bond0 is being created...
>
> [   36.072256] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
>
> [   36.072260] 8021q: adding VLAN 0 to HW filter on device bond0
>
> [   36.072653] bond0: Setting min links value to 1
>
> [   36.072744] bond0: Setting MII monitoring interval to 100
>
> [   36.072788] bond0: Setting xmit hash policy to layer2 (0)
>
> [   36.075361] eth0: network connection down
>
> [   36.078790] bond0: Adding slave eth0
>
> [   36.082048] bond0: Enslaving eth0 as a backup interface with a down link
>
> [   36.095452] eth1: network connection down
>
> [   36.100443] bond0: Adding slave eth1
>
> [   36.103517] bond0: Enslaving eth1 as a backup interface with a down link
>
> [   36.103741] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
>
> [   36.103744] 8021q: adding VLAN 0 to HW filter on device bond0
>
> [   36.104163] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
>
> [   36.104165] 8021q: adding VLAN 0 to HW filter on device bond0
>
> [   39.250788] eth0: network connection up using port A
>
> [   39.250788]     interrupt src:   MSI
>
> [   39.250788]     speed:           1000
>
> [   39.250788]     autonegotiation: yes
>
> [   39.250788]     duplex mode:     full
>
> [   39.250788]     flowctrl:        none
>
> [   39.250788]     role:            slave
>
> [   39.250788]     tcp offload: enabled
>
> [   39.250788]     scatter-gather: enabled
>
> [   39.250788]     tx-checksum: enabled
>
> [   39.250788]     rx-checksum: enabled
>
> [   39.250788]     rx-polling: enabled
>
> [   39.310027] bond0: link status definitely up for interface eth0, 1000
> Mbps full duplex
>
> [   39.310036] bond0: now running without any active interface!
>
> [   39.310166] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
>
> [   39.377955] eth1: network connection up using port A
>
> [   39.377955]     interrupt src:   MSI
>
> [   39.377955]     speed:           1000
>
> [   39.377955]     autonegotiation: yes
>
> [   39.377955]     duplex mode:     full
>
> [   39.377955]     flowctrl:        none
>
> [   39.377955]     role:            slave
>
> [   39.377955]     tcp offload: enabled
>
> [   39.377955]     scatter-gather: enabled
>
> [   39.377955]     tx-checksum: enabled
>
> [   39.377955]     rx-checksum: enabled
>
> [   39.377955]     rx-polling: enabled
>
> [   39.410041] bond0: link status definitely up for interface eth1, 1000
> Mbps full duplex
>