[PATCH 01/22] ARM: dts: r8a7743: Add reset control properties

[PATCH 01/22] ARM: dts: r8a7743: Add reset control properties

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Add properties to describe the reset topology for on-SoC devices:
  - Add the "#reset-cells" property to the CPG/MSSR device node,
  - Add resets and reset-names properties to the various device nodes.

This allows to reset SoC devices using the Reset Controller API.

Note that all resets added match the corresponding module clocks.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7743.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index cd908796fb3b..0ddac81742e4 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -62,6 +62,7 @@
 			clocks = <&cpg CPG_MOD 408>;
 			clock-names = "clk";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
 		};
 
 		irqc: interrupt-controller@e61c0000 {
@@ -81,6 +82,7 @@
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
 		};
 
 		timer {
@@ -102,6 +104,7 @@
 			clock-names = "extal", "usb_extal";
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
+			#reset-cells = <1>;
 		};
 
 		prr: chipid@ff000044 {
@@ -148,6 +151,7 @@
 			clocks = <&cpg CPG_MOD 219>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
 			#dma-cells = <1>;
 			dma-channels = <15>;
 		};
@@ -180,6 +184,7 @@
 			clocks = <&cpg CPG_MOD 218>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
 			#dma-cells = <1>;
 			dma-channels = <15>;
 		};
@@ -195,6 +200,7 @@
 			       <&dmac1 0x21>, <&dmac1 0x22>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
 			status = "disabled";
 		};
 
@@ -209,6 +215,7 @@
 			       <&dmac1 0x25>, <&dmac1 0x26>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
 			status = "disabled";
 		};
 
@@ -223,6 +230,7 @@
 			       <&dmac1 0x27>, <&dmac1 0x28>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
 			status = "disabled";
 		};
 
@@ -237,6 +245,7 @@
 			       <&dmac1 0x1b>, <&dmac1 0x1c>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 1106>;
 			status = "disabled";
 		};
 
@@ -251,6 +260,7 @@
 			       <&dmac1 0x1f>, <&dmac1 0x20>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 1107>;
 			status = "disabled";
 		};
 
@@ -265,6 +275,7 @@
 			       <&dmac1 0x23>, <&dmac1 0x24>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 1108>;
 			status = "disabled";
 		};
 
@@ -279,6 +290,7 @@
 			       <&dmac1 0x3d>, <&dmac1 0x3e>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
 			status = "disabled";
 		};
 
@@ -293,6 +305,7 @@
 			       <&dmac1 0x19>, <&dmac1 0x1a>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
 			status = "disabled";
 		};
 
@@ -307,6 +320,7 @@
 			       <&dmac1 0x1d>, <&dmac1 0x1e>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
 			status = "disabled";
 		};
 
@@ -322,6 +336,7 @@
 			       <&dmac1 0x29>, <&dmac1 0x2a>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
 			status = "disabled";
 		};
 
@@ -337,6 +352,7 @@
 			       <&dmac1 0x2d>, <&dmac1 0x2e>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
 			status = "disabled";
 		};
 
@@ -352,6 +368,7 @@
 			       <&dmac1 0x2b>, <&dmac1 0x2c>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 719>;
 			status = "disabled";
 		};
 
@@ -367,6 +384,7 @@
 			       <&dmac1 0x2f>, <&dmac1 0x30>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
 			status = "disabled";
 		};
 
@@ -382,6 +400,7 @@
 			       <&dmac1 0xfb>, <&dmac1 0xfc>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
 			status = "disabled";
 		};
 
@@ -397,6 +416,7 @@
 			       <&dmac1 0xfd>, <&dmac1 0xfe>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
 			status = "disabled";
 		};
 
@@ -412,6 +432,7 @@
 			       <&dmac1 0x39>, <&dmac1 0x3a>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
 			status = "disabled";
 		};
 
@@ -427,6 +448,7 @@
 			       <&dmac1 0x4d>, <&dmac1 0x4e>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
 			status = "disabled";
 		};
 
@@ -442,6 +464,7 @@
 			       <&dmac1 0x3b>, <&dmac1 0x3c>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
 			status = "disabled";
 		};
 
@@ -451,6 +474,7 @@
 			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 813>;
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
 			phy-mode = "rmii";
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 01/22] ARM: dts: r8a7743: Add reset control properties

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Add properties to describe the reset topology for on-SoC devices:
  - Add the "#reset-cells" property to the CPG/MSSR device node,
  - Add resets and reset-names properties to the various device nodes.

This allows to reset SoC devices using the Reset Controller API.

Note that all resets added match the corresponding module clocks.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7743.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index cd908796fb3b..0ddac81742e4 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -62,6 +62,7 @@
 			clocks = <&cpg CPG_MOD 408>;
 			clock-names = "clk";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
 		};
 
 		irqc: interrupt-controller at e61c0000 {
@@ -81,6 +82,7 @@
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
 		};
 
 		timer {
@@ -102,6 +104,7 @@
 			clock-names = "extal", "usb_extal";
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
+			#reset-cells = <1>;
 		};
 
 		prr: chipid at ff000044 {
@@ -148,6 +151,7 @@
 			clocks = <&cpg CPG_MOD 219>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
 			#dma-cells = <1>;
 			dma-channels = <15>;
 		};
@@ -180,6 +184,7 @@
 			clocks = <&cpg CPG_MOD 218>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
 			#dma-cells = <1>;
 			dma-channels = <15>;
 		};
@@ -195,6 +200,7 @@
 			       <&dmac1 0x21>, <&dmac1 0x22>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
 			status = "disabled";
 		};
 
@@ -209,6 +215,7 @@
 			       <&dmac1 0x25>, <&dmac1 0x26>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
 			status = "disabled";
 		};
 
@@ -223,6 +230,7 @@
 			       <&dmac1 0x27>, <&dmac1 0x28>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
 			status = "disabled";
 		};
 
@@ -237,6 +245,7 @@
 			       <&dmac1 0x1b>, <&dmac1 0x1c>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 1106>;
 			status = "disabled";
 		};
 
@@ -251,6 +260,7 @@
 			       <&dmac1 0x1f>, <&dmac1 0x20>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 1107>;
 			status = "disabled";
 		};
 
@@ -265,6 +275,7 @@
 			       <&dmac1 0x23>, <&dmac1 0x24>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 1108>;
 			status = "disabled";
 		};
 
@@ -279,6 +290,7 @@
 			       <&dmac1 0x3d>, <&dmac1 0x3e>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
 			status = "disabled";
 		};
 
@@ -293,6 +305,7 @@
 			       <&dmac1 0x19>, <&dmac1 0x1a>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
 			status = "disabled";
 		};
 
@@ -307,6 +320,7 @@
 			       <&dmac1 0x1d>, <&dmac1 0x1e>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
 			status = "disabled";
 		};
 
@@ -322,6 +336,7 @@
 			       <&dmac1 0x29>, <&dmac1 0x2a>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
 			status = "disabled";
 		};
 
@@ -337,6 +352,7 @@
 			       <&dmac1 0x2d>, <&dmac1 0x2e>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
 			status = "disabled";
 		};
 
@@ -352,6 +368,7 @@
 			       <&dmac1 0x2b>, <&dmac1 0x2c>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 719>;
 			status = "disabled";
 		};
 
@@ -367,6 +384,7 @@
 			       <&dmac1 0x2f>, <&dmac1 0x30>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
 			status = "disabled";
 		};
 
@@ -382,6 +400,7 @@
 			       <&dmac1 0xfb>, <&dmac1 0xfc>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
 			status = "disabled";
 		};
 
@@ -397,6 +416,7 @@
 			       <&dmac1 0xfd>, <&dmac1 0xfe>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
 			status = "disabled";
 		};
 
@@ -412,6 +432,7 @@
 			       <&dmac1 0x39>, <&dmac1 0x3a>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
 			status = "disabled";
 		};
 
@@ -427,6 +448,7 @@
 			       <&dmac1 0x4d>, <&dmac1 0x4e>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
 			status = "disabled";
 		};
 
@@ -442,6 +464,7 @@
 			       <&dmac1 0x3b>, <&dmac1 0x3c>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
 			status = "disabled";
 		};
 
@@ -451,6 +474,7 @@
 			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 813>;
 			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
 			phy-mode = "rmii";
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 02/22] ARM: dts: r8a7745: Add reset control properties

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Add properties to describe the reset topology for on-SoC devices:
  - Add the "#reset-cells" property to the CPG/MSSR device node,
  - Add resets and reset-names properties to the various device nodes.

This allows to reset SoC devices using the Reset Controller API.

Note that all resets added match the corresponding module clocks.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7745.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index bca88715fada..2feb0084bb3b 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -62,6 +62,7 @@
 			clocks = <&cpg CPG_MOD 408>;
 			clock-names = "clk";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
 		};
 
 		irqc: interrupt-controller@e61c0000 {
@@ -81,6 +82,7 @@
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
 		};
 
 		timer {
@@ -102,6 +104,7 @@
 			clock-names = "extal", "usb_extal";
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
+			#reset-cells = <1>;
 		};
 
 		prr: chipid@ff000044 {
@@ -148,6 +151,7 @@
 			clocks = <&cpg CPG_MOD 219>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
 			#dma-cells = <1>;
 			dma-channels = <15>;
 		};
@@ -180,6 +184,7 @@
 			clocks = <&cpg CPG_MOD 218>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
 			#dma-cells = <1>;
 			dma-channels = <15>;
 		};
@@ -195,6 +200,7 @@
 			       <&dmac1 0x21>, <&dmac1 0x22>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
 			status = "disabled";
 		};
 
@@ -209,6 +215,7 @@
 			       <&dmac1 0x25>, <&dmac1 0x26>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
 			status = "disabled";
 		};
 
@@ -223,6 +230,7 @@
 			       <&dmac1 0x27>, <&dmac1 0x28>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
 			status = "disabled";
 		};
 
@@ -237,6 +245,7 @@
 			       <&dmac1 0x1b>, <&dmac1 0x1c>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 1106>;
 			status = "disabled";
 		};
 
@@ -251,6 +260,7 @@
 			       <&dmac1 0x1f>, <&dmac1 0x20>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 1107>;
 			status = "disabled";
 		};
 
@@ -265,6 +275,7 @@
 			       <&dmac1 0x23>, <&dmac1 0x24>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 1108>;
 			status = "disabled";
 		};
 
@@ -279,6 +290,7 @@
 			       <&dmac1 0x3d>, <&dmac1 0x3e>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
 			status = "disabled";
 		};
 
@@ -293,6 +305,7 @@
 			       <&dmac1 0x19>, <&dmac1 0x1a>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
 			status = "disabled";
 		};
 
@@ -307,6 +320,7 @@
 			       <&dmac1 0x1d>, <&dmac1 0x1e>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
 			status = "disabled";
 		};
 
@@ -322,6 +336,7 @@
 			       <&dmac1 0x29>, <&dmac1 0x2a>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
 			status = "disabled";
 		};
 
@@ -337,6 +352,7 @@
 			       <&dmac1 0x2d>, <&dmac1 0x2e>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
 			status = "disabled";
 		};
 
@@ -352,6 +368,7 @@
 			       <&dmac1 0x2b>, <&dmac1 0x2c>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 719>;
 			status = "disabled";
 		};
 
@@ -367,6 +384,7 @@
 			       <&dmac1 0x2f>, <&dmac1 0x30>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
 			status = "disabled";
 		};
 
@@ -382,6 +400,7 @@
 			       <&dmac1 0xfb>, <&dmac1 0xfc>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
 			status = "disabled";
 		};
 
@@ -397,6 +416,7 @@
 			       <&dmac1 0xfd>, <&dmac1 0xfe>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
 			status = "disabled";
 		};
 
@@ -412,6 +432,7 @@
 			       <&dmac1 0x39>, <&dmac1 0x3a>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
 			status = "disabled";
 		};
 
@@ -427,6 +448,7 @@
 			       <&dmac1 0x4d>, <&dmac1 0x4e>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
 			status = "disabled";
 		};
 
@@ -442,6 +464,7 @@
 			       <&dmac1 0x3b>, <&dmac1 0x3c>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
 			status = "disabled";
 		};
 
@@ -451,6 +474,7 @@
 			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 813>;
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
 			phy-mode = "rmii";
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 02/22] ARM: dts: r8a7745: Add reset control properties

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Add properties to describe the reset topology for on-SoC devices:
  - Add the "#reset-cells" property to the CPG/MSSR device node,
  - Add resets and reset-names properties to the various device nodes.

This allows to reset SoC devices using the Reset Controller API.

Note that all resets added match the corresponding module clocks.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7745.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index bca88715fada..2feb0084bb3b 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -62,6 +62,7 @@
 			clocks = <&cpg CPG_MOD 408>;
 			clock-names = "clk";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
 		};
 
 		irqc: interrupt-controller at e61c0000 {
@@ -81,6 +82,7 @@
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 407>;
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
 		};
 
 		timer {
@@ -102,6 +104,7 @@
 			clock-names = "extal", "usb_extal";
 			#clock-cells = <2>;
 			#power-domain-cells = <0>;
+			#reset-cells = <1>;
 		};
 
 		prr: chipid at ff000044 {
@@ -148,6 +151,7 @@
 			clocks = <&cpg CPG_MOD 219>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
 			#dma-cells = <1>;
 			dma-channels = <15>;
 		};
@@ -180,6 +184,7 @@
 			clocks = <&cpg CPG_MOD 218>;
 			clock-names = "fck";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
 			#dma-cells = <1>;
 			dma-channels = <15>;
 		};
@@ -195,6 +200,7 @@
 			       <&dmac1 0x21>, <&dmac1 0x22>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
 			status = "disabled";
 		};
 
@@ -209,6 +215,7 @@
 			       <&dmac1 0x25>, <&dmac1 0x26>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
 			status = "disabled";
 		};
 
@@ -223,6 +230,7 @@
 			       <&dmac1 0x27>, <&dmac1 0x28>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
 			status = "disabled";
 		};
 
@@ -237,6 +245,7 @@
 			       <&dmac1 0x1b>, <&dmac1 0x1c>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 1106>;
 			status = "disabled";
 		};
 
@@ -251,6 +260,7 @@
 			       <&dmac1 0x1f>, <&dmac1 0x20>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 1107>;
 			status = "disabled";
 		};
 
@@ -265,6 +275,7 @@
 			       <&dmac1 0x23>, <&dmac1 0x24>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 1108>;
 			status = "disabled";
 		};
 
@@ -279,6 +290,7 @@
 			       <&dmac1 0x3d>, <&dmac1 0x3e>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
 			status = "disabled";
 		};
 
@@ -293,6 +305,7 @@
 			       <&dmac1 0x19>, <&dmac1 0x1a>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
 			status = "disabled";
 		};
 
@@ -307,6 +320,7 @@
 			       <&dmac1 0x1d>, <&dmac1 0x1e>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
 			status = "disabled";
 		};
 
@@ -322,6 +336,7 @@
 			       <&dmac1 0x29>, <&dmac1 0x2a>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
 			status = "disabled";
 		};
 
@@ -337,6 +352,7 @@
 			       <&dmac1 0x2d>, <&dmac1 0x2e>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
 			status = "disabled";
 		};
 
@@ -352,6 +368,7 @@
 			       <&dmac1 0x2b>, <&dmac1 0x2c>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 719>;
 			status = "disabled";
 		};
 
@@ -367,6 +384,7 @@
 			       <&dmac1 0x2f>, <&dmac1 0x30>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 718>;
 			status = "disabled";
 		};
 
@@ -382,6 +400,7 @@
 			       <&dmac1 0xfb>, <&dmac1 0xfc>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 715>;
 			status = "disabled";
 		};
 
@@ -397,6 +416,7 @@
 			       <&dmac1 0xfd>, <&dmac1 0xfe>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 714>;
 			status = "disabled";
 		};
 
@@ -412,6 +432,7 @@
 			       <&dmac1 0x39>, <&dmac1 0x3a>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
 			status = "disabled";
 		};
 
@@ -427,6 +448,7 @@
 			       <&dmac1 0x4d>, <&dmac1 0x4e>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
 			status = "disabled";
 		};
 
@@ -442,6 +464,7 @@
 			       <&dmac1 0x3b>, <&dmac1 0x3c>;
 			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 713>;
 			status = "disabled";
 		};
 
@@ -451,6 +474,7 @@
 			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 813>;
 			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 813>;
 			phy-mode = "rmii";
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 03/22] ARM: dts: r7s72100: add power-domains to sdhi

[Simon Horman]

From: Chris Brandt <chris.brandt@renesas.com>

Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Fixes: 66474697923c ("ARM: dts: r7s72100: add sdhi to device tree")
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 9b12d73e67dc..9fb2e510958a 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -501,6 +501,7 @@
 		clocks = <&mstp12_clks R7S72100_CLK_SDHI00>,
 			 <&mstp12_clks R7S72100_CLK_SDHI01>;
 		clock-names = "core", "cd";
+		power-domains = <&cpg_clocks>;
 		cap-sd-highspeed;
 		cap-sdio-irq;
 		status = "disabled";
@@ -516,6 +517,7 @@
 		clocks = <&mstp12_clks R7S72100_CLK_SDHI10>,
 			 <&mstp12_clks R7S72100_CLK_SDHI11>;
 		clock-names = "core", "cd";
+		power-domains = <&cpg_clocks>;
 		cap-sd-highspeed;
 		cap-sdio-irq;
 		status = "disabled";
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 03/22] ARM: dts: r7s72100: add power-domains to sdhi

[Simon Horman]

From: Chris Brandt <chris.brandt@renesas.com>

Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Fixes: 66474697923c ("ARM: dts: r7s72100: add sdhi to device tree")
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 9b12d73e67dc..9fb2e510958a 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -501,6 +501,7 @@
 		clocks = <&mstp12_clks R7S72100_CLK_SDHI00>,
 			 <&mstp12_clks R7S72100_CLK_SDHI01>;
 		clock-names = "core", "cd";
+		power-domains = <&cpg_clocks>;
 		cap-sd-highspeed;
 		cap-sdio-irq;
 		status = "disabled";
@@ -516,6 +517,7 @@
 		clocks = <&mstp12_clks R7S72100_CLK_SDHI10>,
 			 <&mstp12_clks R7S72100_CLK_SDHI11>;
 		clock-names = "core", "cd";
+		power-domains = <&cpg_clocks>;
 		cap-sd-highspeed;
 		cap-sdio-irq;
 		status = "disabled";
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 04/22] ARM: dts: r8a7794: Add DU1 clock to device tree

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Add the missing module clock for the second channel of the display unit.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794.dtsi            | 8 +++++---
 include/dt-bindings/clock/r8a7794-clock.h | 1 +
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 38bf9ed8e739..f5f8d1c03ef7 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1270,19 +1270,21 @@
 			clocks = <&mp_clk>, <&hp_clk>,
 				 <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
 				 <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				 <&zx_clk>;
+				 <&zx_clk>, <&zx_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A7794_CLK_EHCI R8A7794_CLK_HSUSB
 				R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5
 				R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0
 				R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1
-				R8A7794_CLK_SCIF0 R8A7794_CLK_DU0
+				R8A7794_CLK_SCIF0
+				R8A7794_CLK_DU1 R8A7794_CLK_DU0
 			>;
 			clock-output-names =
 				"ehci", "hsusb",
 				"hscif2", "scif5", "scif4", "hscif1", "hscif0",
-				"scif3", "scif2", "scif1", "scif0", "du0";
+				"scif3", "scif2", "scif1", "scif0",
+				"du1", "du0";
 		};
 		mstp8_clks: mstp8_clks@e6150990 {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h
index a26776f7dedd..93e99c3ffc8d 100644
--- a/include/dt-bindings/clock/r8a7794-clock.h
+++ b/include/dt-bindings/clock/r8a7794-clock.h
@@ -82,6 +82,7 @@
 #define R8A7794_CLK_SCIF2		19
 #define R8A7794_CLK_SCIF1		20
 #define R8A7794_CLK_SCIF0		21
+#define R8A7794_CLK_DU1			23
 #define R8A7794_CLK_DU0			24
 
 /* MSTP8 */
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 04/22] ARM: dts: r8a7794: Add DU1 clock to device tree

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Add the missing module clock for the second channel of the display unit.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794.dtsi            | 8 +++++---
 include/dt-bindings/clock/r8a7794-clock.h | 1 +
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 38bf9ed8e739..f5f8d1c03ef7 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -1270,19 +1270,21 @@
 			clocks = <&mp_clk>, <&hp_clk>,
 				 <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>,
 				 <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				 <&zx_clk>;
+				 <&zx_clk>, <&zx_clk>;
 			#clock-cells = <1>;
 			clock-indices = <
 				R8A7794_CLK_EHCI R8A7794_CLK_HSUSB
 				R8A7794_CLK_HSCIF2 R8A7794_CLK_SCIF5
 				R8A7794_CLK_SCIF4 R8A7794_CLK_HSCIF1 R8A7794_CLK_HSCIF0
 				R8A7794_CLK_SCIF3 R8A7794_CLK_SCIF2 R8A7794_CLK_SCIF1
-				R8A7794_CLK_SCIF0 R8A7794_CLK_DU0
+				R8A7794_CLK_SCIF0
+				R8A7794_CLK_DU1 R8A7794_CLK_DU0
 			>;
 			clock-output-names =
 				"ehci", "hsusb",
 				"hscif2", "scif5", "scif4", "hscif1", "hscif0",
-				"scif3", "scif2", "scif1", "scif0", "du0";
+				"scif3", "scif2", "scif1", "scif0",
+				"du1", "du0";
 		};
 		mstp8_clks: mstp8_clks at e6150990 {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/include/dt-bindings/clock/r8a7794-clock.h b/include/dt-bindings/clock/r8a7794-clock.h
index a26776f7dedd..93e99c3ffc8d 100644
--- a/include/dt-bindings/clock/r8a7794-clock.h
+++ b/include/dt-bindings/clock/r8a7794-clock.h
@@ -82,6 +82,7 @@
 #define R8A7794_CLK_SCIF2		19
 #define R8A7794_CLK_SCIF1		20
 #define R8A7794_CLK_SCIF0		21
+#define R8A7794_CLK_DU1			23
 #define R8A7794_CLK_DU0			24
 
 /* MSTP8 */
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 05/22] ARM: dts: r8a7794: Correct clock of DU1

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The second channel of the display unit uses a different module clock
than the first channel.

Fixes: 46c4f13d04d729fa ("ARM: shmobile: r8a7794: Add DU node to device tree")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index f5f8d1c03ef7..2f6e94fd408c 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -925,7 +925,7 @@
 		interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_DU0>,
-			 <&mstp7_clks R8A7794_CLK_DU0>;
+			 <&mstp7_clks R8A7794_CLK_DU1>;
 		clock-names = "du.0", "du.1";
 		status = "disabled";
 
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 05/22] ARM: dts: r8a7794: Correct clock of DU1

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The second channel of the display unit uses a different module clock
than the first channel.

Fixes: 46c4f13d04d729fa ("ARM: shmobile: r8a7794: Add DU node to device tree")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index f5f8d1c03ef7..2f6e94fd408c 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -925,7 +925,7 @@
 		interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_DU0>,
-			 <&mstp7_clks R8A7794_CLK_DU0>;
+			 <&mstp7_clks R8A7794_CLK_DU1>;
 		clock-names = "du.0", "du.1";
 		status = "disabled";
 
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 06/22] ARM: dts: alt: Correct clock of DU1

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The second channel of the display unit uses a different module clock
than the first channel.

Fixes: 876e7fb9f418fd86 ("ARM: shmobile: r8a7794: alt: Enable VGA port")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794-alt.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 3fcf76b8e923..f1eea13cdf44 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -168,7 +168,7 @@
 	status = "okay";
 
 	clocks = <&mstp7_clks R8A7794_CLK_DU0>,
-		 <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&mstp7_clks R8A7794_CLK_DU1>,
 		 <&x13_clk>, <&x2_clk>;
 	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
 
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 06/22] ARM: dts: alt: Correct clock of DU1

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The second channel of the display unit uses a different module clock
than the first channel.

Fixes: 876e7fb9f418fd86 ("ARM: shmobile: r8a7794: alt: Enable VGA port")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794-alt.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts
index 3fcf76b8e923..f1eea13cdf44 100644
--- a/arch/arm/boot/dts/r8a7794-alt.dts
+++ b/arch/arm/boot/dts/r8a7794-alt.dts
@@ -168,7 +168,7 @@
 	status = "okay";
 
 	clocks = <&mstp7_clks R8A7794_CLK_DU0>,
-		 <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&mstp7_clks R8A7794_CLK_DU1>,
 		 <&x13_clk>, <&x2_clk>;
 	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
 
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 07/22] ARM: dts: silk: Correct clock of DU1

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The second channel of the display unit uses a different module clock
than the first channel.

Fixes: 84e734f497cd48f6 ("ARM: dts: silk: add DU DT support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794-silk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index c742d80d6dca..4cb5278d104d 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -424,7 +424,7 @@
 	status = "okay";
 
 	clocks = <&mstp7_clks R8A7794_CLK_DU0>,
-		 <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&mstp7_clks R8A7794_CLK_DU1>,
 		 <&x2_clk>, <&x3_clk>;
 	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
 
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 07/22] ARM: dts: silk: Correct clock of DU1

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The second channel of the display unit uses a different module clock
than the first channel.

Fixes: 84e734f497cd48f6 ("ARM: dts: silk: add DU DT support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794-silk.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts
index c742d80d6dca..4cb5278d104d 100644
--- a/arch/arm/boot/dts/r8a7794-silk.dts
+++ b/arch/arm/boot/dts/r8a7794-silk.dts
@@ -424,7 +424,7 @@
 	status = "okay";
 
 	clocks = <&mstp7_clks R8A7794_CLK_DU0>,
-		 <&mstp7_clks R8A7794_CLK_DU0>,
+		 <&mstp7_clks R8A7794_CLK_DU1>,
 		 <&x2_clk>, <&x3_clk>;
 	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
 
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 08/22] ARM: dts: r7s72100: fix ethernet clock parent

[Simon Horman]

From: Chris Brandt <chris.brandt@renesas.com>

Technically, the Ethernet block is run off the 133MHz Bus (B) clock, not
the 33MHz Peripheral 0 (P0) clock.

Fixes: 969244f9c720 ("ARM: dts: r7s72100: add ethernet clock to device tree")
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 9fb2e510958a..47ef53a4c8bf 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -121,7 +121,7 @@
 			#clock-cells = <1>;
 			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0xfcfe0430 4>;
-			clocks = <&p0_clk>;
+			clocks = <&b_clk>;
 			clock-indices = <R7S72100_CLK_ETHER>;
 			clock-output-names = "ether";
 		};
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 08/22] ARM: dts: r7s72100: fix ethernet clock parent

[Simon Horman]

From: Chris Brandt <chris.brandt@renesas.com>

Technically, the Ethernet block is run off the 133MHz Bus (B) clock, not
the 33MHz Peripheral 0 (P0) clock.

Fixes: 969244f9c720 ("ARM: dts: r7s72100: add ethernet clock to device tree")
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 9fb2e510958a..47ef53a4c8bf 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -121,7 +121,7 @@
 			#clock-cells = <1>;
 			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0xfcfe0430 4>;
-			clocks = <&p0_clk>;
+			clocks = <&b_clk>;
 			clock-indices = <R7S72100_CLK_ETHER>;
 			clock-output-names = "ether";
 		};
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 09/22] ARM: dts: r8a7790: Correct parent of SSI[0-9] clocks

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The SSI-ALL gate clock is located in between the P clock and the
individual SSI[0-9] clocks, hence the former should be listed as their
parent.

Fixes: bcde372254386872 ("ARM: shmobile: r8a7790: add MSTP10 support on DTSI")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 534525665bb3..fe6b8c2a2d71 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1443,8 +1443,11 @@
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
 			clocks = <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
 				<&p_clk>,
 				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 09/22] ARM: dts: r8a7790: Correct parent of SSI[0-9] clocks

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The SSI-ALL gate clock is located in between the P clock and the
individual SSI[0-9] clocks, hence the former should be listed as their
parent.

Fixes: bcde372254386872 ("ARM: shmobile: r8a7790: add MSTP10 support on DTSI")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 534525665bb3..fe6b8c2a2d71 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1443,8 +1443,11 @@
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
 			clocks = <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7790_CLK_SSI_ALL>, <&mstp10_clks R8A7790_CLK_SSI_ALL>,
 				<&p_clk>,
 				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 10/22] ARM: dts: r8a7791: Correct parent of SSI[0-9] clocks

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The SSI-ALL gate clock is located in between the P clock and the
individual SSI[0-9] clocks, hence the former should be listed as their
parent.

Fixes: ee9141522dcf13f8 ("ARM: shmobile: r8a7791: add MSTP10 support on DTSI")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index b319ef4d57b0..a6478ca3f4ca 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1447,8 +1447,11 @@
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
 			clocks = <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
 				<&p_clk>,
 				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 10/22] ARM: dts: r8a7791: Correct parent of SSI[0-9] clocks

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The SSI-ALL gate clock is located in between the P clock and the
individual SSI[0-9] clocks, hence the former should be listed as their
parent.

Fixes: ee9141522dcf13f8 ("ARM: shmobile: r8a7791: add MSTP10 support on DTSI")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index b319ef4d57b0..a6478ca3f4ca 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1447,8 +1447,11 @@
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
 			clocks = <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7791_CLK_SSI_ALL>, <&mstp10_clks R8A7791_CLK_SSI_ALL>,
 				<&p_clk>,
 				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>,
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 11/22] ARM: dts: r8a7793: Correct parent of SSI[0-9] clocks

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The SSI-ALL gate clock is located in between the P clock and the
individual SSI[0-9] clocks, hence the former should be listed as their
parent.

Fixes: 072d326542e49187 ("ARM: dts: r8a7793: add MSTP10 clocks to device tree")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7793.dtsi | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 9fcf3a9ca084..4de6041d61f9 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1269,8 +1269,11 @@
 			compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
 			clocks = <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				<&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
 				<&p_clk>,
 				<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 11/22] ARM: dts: r8a7793: Correct parent of SSI[0-9] clocks

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The SSI-ALL gate clock is located in between the P clock and the
individual SSI[0-9] clocks, hence the former should be listed as their
parent.

Fixes: 072d326542e49187 ("ARM: dts: r8a7793: add MSTP10 clocks to device tree")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7793.dtsi | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 9fcf3a9ca084..4de6041d61f9 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -1269,8 +1269,11 @@
 			compatible = "renesas,r8a7793-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
 			clocks = <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
-				<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
+				<&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
+				<&mstp10_clks R8A7793_CLK_SSI_ALL>, <&mstp10_clks R8A7793_CLK_SSI_ALL>,
 				<&p_clk>,
 				<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
 				<&mstp10_clks R8A7793_CLK_SCU_ALL>, <&mstp10_clks R8A7793_CLK_SCU_ALL>,
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 12/22] ARM: dts: r8a7792: Correct Z clock

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Unlike other R-Car Gen2 SoCs with Cortex-A15 CPU cores, R-Car V2H does
not have a programmable Z clock (Cortex-A15 CPU core clock), but uses a
fixed divider.
This is similar to the Z2 clock (Cortex-A7 CPU core clock) on R-Car E2.

Hence:
  - Remove the Z clock output from the cpg_clocks node, as this implied
    a programmable clock,
  - Add the Z clock as a fixed factor clock,
  - Let the first CPU node point to the new Z clock,
  - Remove the Z clock index from the bindings (this definition was used
    by r8a7792.dtsi only, and was not a contract between DT and driver).

Fixes: 7c4163aae3d8e5b9 ("ARM: dts: r8a7792: initial SoC device tree")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7792.dtsi            | 11 +++++++++--
 include/dt-bindings/clock/r8a7792-clock.h |  1 -
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 6c0797ebc08f..0efecb232ee5 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -46,7 +46,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <0>;
 			clock-frequency = <1000000000>;
-			clocks = <&cpg_clocks R8A7792_CLK_Z>;
+			clocks = <&z_clk>;
 			power-domains = <&sysc R8A7792_PD_CA15_CPU0>;
 			next-level-cache = <&L2_CA15>;
 		};
@@ -766,7 +766,7 @@
 			clocks = <&extal_clk>;
 			#clock-cells = <1>;
 			clock-output-names = "main", "pll0", "pll1", "pll3",
-					     "lb", "qspi", "z";
+					     "lb", "qspi";
 			#power-domain-cells = <0>;
 		};
 
@@ -778,6 +778,13 @@
 			clock-div = <2>;
 			clock-mult = <1>;
 		};
+		z_clk: z {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL0>;
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
 		zx_clk: zx {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
diff --git a/include/dt-bindings/clock/r8a7792-clock.h b/include/dt-bindings/clock/r8a7792-clock.h
index 94dd16a1e6e6..5be90bc23bd7 100644
--- a/include/dt-bindings/clock/r8a7792-clock.h
+++ b/include/dt-bindings/clock/r8a7792-clock.h
@@ -17,7 +17,6 @@
 #define R8A7792_CLK_PLL3		3
 #define R8A7792_CLK_LB			4
 #define R8A7792_CLK_QSPI		5
-#define R8A7792_CLK_Z			6
 
 /* MSTP0 */
 #define R8A7792_CLK_MSIOF0		0
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 12/22] ARM: dts: r8a7792: Correct Z clock

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Unlike other R-Car Gen2 SoCs with Cortex-A15 CPU cores, R-Car V2H does
not have a programmable Z clock (Cortex-A15 CPU core clock), but uses a
fixed divider.
This is similar to the Z2 clock (Cortex-A7 CPU core clock) on R-Car E2.

Hence:
  - Remove the Z clock output from the cpg_clocks node, as this implied
    a programmable clock,
  - Add the Z clock as a fixed factor clock,
  - Let the first CPU node point to the new Z clock,
  - Remove the Z clock index from the bindings (this definition was used
    by r8a7792.dtsi only, and was not a contract between DT and driver).

Fixes: 7c4163aae3d8e5b9 ("ARM: dts: r8a7792: initial SoC device tree")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7792.dtsi            | 11 +++++++++--
 include/dt-bindings/clock/r8a7792-clock.h |  1 -
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi
index 6c0797ebc08f..0efecb232ee5 100644
--- a/arch/arm/boot/dts/r8a7792.dtsi
+++ b/arch/arm/boot/dts/r8a7792.dtsi
@@ -46,7 +46,7 @@
 			compatible = "arm,cortex-a15";
 			reg = <0>;
 			clock-frequency = <1000000000>;
-			clocks = <&cpg_clocks R8A7792_CLK_Z>;
+			clocks = <&z_clk>;
 			power-domains = <&sysc R8A7792_PD_CA15_CPU0>;
 			next-level-cache = <&L2_CA15>;
 		};
@@ -766,7 +766,7 @@
 			clocks = <&extal_clk>;
 			#clock-cells = <1>;
 			clock-output-names = "main", "pll0", "pll1", "pll3",
-					     "lb", "qspi", "z";
+					     "lb", "qspi";
 			#power-domain-cells = <0>;
 		};
 
@@ -778,6 +778,13 @@
 			clock-div = <2>;
 			clock-mult = <1>;
 		};
+		z_clk: z {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7792_CLK_PLL0>;
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
 		zx_clk: zx {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
diff --git a/include/dt-bindings/clock/r8a7792-clock.h b/include/dt-bindings/clock/r8a7792-clock.h
index 94dd16a1e6e6..5be90bc23bd7 100644
--- a/include/dt-bindings/clock/r8a7792-clock.h
+++ b/include/dt-bindings/clock/r8a7792-clock.h
@@ -17,7 +17,6 @@
 #define R8A7792_CLK_PLL3		3
 #define R8A7792_CLK_LB			4
 #define R8A7792_CLK_QSPI		5
-#define R8A7792_CLK_Z			6
 
 /* MSTP0 */
 #define R8A7792_CLK_MSIOF0		0
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 13/22] ARM: dts: r8a7794: Add Z2 clock

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Add the Z2 clock (Cortex-A7 CPU core clock), which uses a fixed divider,
and link the first CPU node to it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 2f6e94fd408c..a19b884fb258 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -43,6 +43,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0>;
 			clock-frequency = <1000000000>;
+			clocks = <&z2_clk>;
 			power-domains = <&sysc R8A7794_PD_CA7_CPU0>;
 			next-level-cache = <&L2_CA7>;
 		};
@@ -1064,6 +1065,13 @@
 			clock-div = <2>;
 			clock-mult = <1>;
 		};
+		z2_clk: z2 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7794_CLK_PLL0>;
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
 		zg_clk: zg {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 13/22] ARM: dts: r8a7794: Add Z2 clock

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

Add the Z2 clock (Cortex-A7 CPU core clock), which uses a fixed divider,
and link the first CPU node to it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7794.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 2f6e94fd408c..a19b884fb258 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -43,6 +43,7 @@
 			compatible = "arm,cortex-a7";
 			reg = <0>;
 			clock-frequency = <1000000000>;
+			clocks = <&z2_clk>;
 			power-domains = <&sysc R8A7794_PD_CA7_CPU0>;
 			next-level-cache = <&L2_CA7>;
 		};
@@ -1064,6 +1065,13 @@
 			clock-div = <2>;
 			clock-mult = <1>;
 		};
+		z2_clk: z2 {
+			compatible = "fixed-factor-clock";
+			clocks = <&cpg_clocks R8A7794_CLK_PLL0>;
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <1>;
+		};
 		zg_clk: zg {
 			compatible = "fixed-factor-clock";
 			clocks = <&cpg_clocks R8A7794_CLK_PLL1>;
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 14/22] ARM: dts: koelsch: Correct clock frequency of X2 DU clock input

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The X2 crystal oscillator on the Koelsch development board provides a
74.25 MHz clock, not a 148.5 MHz clock.

Fixes: cd21cb46e14aae3a ("ARM: shmobile: koelsch: Add DU external pixel clocks to DT")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 59beb8402a36..001e6116c47c 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -292,7 +292,7 @@
 	x2_clk: x2-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <148500000>;
+		clock-frequency = <74250000>;
 	};
 
 	x13_clk: x13-clock {
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 14/22] ARM: dts: koelsch: Correct clock frequency of X2 DU clock input

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The X2 crystal oscillator on the Koelsch development board provides a
74.25 MHz clock, not a 148.5 MHz clock.

Fixes: cd21cb46e14aae3a ("ARM: shmobile: koelsch: Add DU external pixel clocks to DT")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Niklas S?derlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 59beb8402a36..001e6116c47c 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -292,7 +292,7 @@
 	x2_clk: x2-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <148500000>;
+		clock-frequency = <74250000>;
 	};
 
 	x13_clk: x13-clock {
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 15/22] ARM: dts: r7s72100: add rtc clock to device tree

[Simon Horman]

From: Chris Brandt <chris.brandt@renesas.com>

Add the realtime clock functional clock source.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100.dtsi            | 9 +++++++++
 include/dt-bindings/clock/r7s72100-clock.h | 3 +++
 2 files changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 47ef53a4c8bf..9eace892fec7 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -117,6 +117,15 @@
 			clock-output-names = "ostm0", "ostm1";
 		};
 
+		mstp6_clks: mstp6_clks@fcfe042c {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe042c 4>;
+			clocks = <&p0_clk>;
+			clock-indices = <R7S72100_CLK_RTC>;
+			clock-output-names = "rtc";
+		};
+
 		mstp7_clks: mstp7_clks@fcfe0430 {
 			#clock-cells = <1>;
 			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/include/dt-bindings/clock/r7s72100-clock.h b/include/dt-bindings/clock/r7s72100-clock.h
index cd2ed5194255..bc256d31099a 100644
--- a/include/dt-bindings/clock/r7s72100-clock.h
+++ b/include/dt-bindings/clock/r7s72100-clock.h
@@ -29,6 +29,9 @@
 #define R7S72100_CLK_OSTM0	1
 #define R7S72100_CLK_OSTM1	0
 
+/* MSTP6 */
+#define R7S72100_CLK_RTC	0
+
 /* MSTP7 */
 #define R7S72100_CLK_ETHER	4
 
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 15/22] ARM: dts: r7s72100: add rtc clock to device tree

[Simon Horman]

From: Chris Brandt <chris.brandt@renesas.com>

Add the realtime clock functional clock source.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100.dtsi            | 9 +++++++++
 include/dt-bindings/clock/r7s72100-clock.h | 3 +++
 2 files changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 47ef53a4c8bf..9eace892fec7 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -117,6 +117,15 @@
 			clock-output-names = "ostm0", "ostm1";
 		};
 
+		mstp6_clks: mstp6_clks at fcfe042c {
+			#clock-cells = <1>;
+			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0xfcfe042c 4>;
+			clocks = <&p0_clk>;
+			clock-indices = <R7S72100_CLK_RTC>;
+			clock-output-names = "rtc";
+		};
+
 		mstp7_clks: mstp7_clks at fcfe0430 {
 			#clock-cells = <1>;
 			compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/include/dt-bindings/clock/r7s72100-clock.h b/include/dt-bindings/clock/r7s72100-clock.h
index cd2ed5194255..bc256d31099a 100644
--- a/include/dt-bindings/clock/r7s72100-clock.h
+++ b/include/dt-bindings/clock/r7s72100-clock.h
@@ -29,6 +29,9 @@
 #define R7S72100_CLK_OSTM0	1
 #define R7S72100_CLK_OSTM1	0
 
+/* MSTP6 */
+#define R7S72100_CLK_RTC	0
+
 /* MSTP7 */
 #define R7S72100_CLK_ETHER	4
 
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 16/22] ARM: dts: r7s72100: add RTC_X clock inputs to device tree

[Simon Horman]

From: Chris Brandt <chris.brandt@renesas.com>

Add the RTC clocks to device tree. The frequencies must be fixed values
according to the hardware manual.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 9eace892fec7..9db46ac08ba7 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -51,6 +51,20 @@
 			clock-frequency = <0>;
 		};
 
+		rtc_x1_clk: rtc_x1 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			/* If clk present, value must be set by board to 32678 */
+			clock-frequency = <0>;
+		};
+
+		rtc_x3_clk: rtc_x3 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			/* If clk present, value must be set by board to 4000000 */
+			clock-frequency = <0>;
+		};
+
 		/* Fixed factor clocks */
 		b_clk: b {
 			#clock-cells = <0>;
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 16/22] ARM: dts: r7s72100: add RTC_X clock inputs to device tree

[Simon Horman]

From: Chris Brandt <chris.brandt@renesas.com>

Add the RTC clocks to device tree. The frequencies must be fixed values
according to the hardware manual.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 9eace892fec7..9db46ac08ba7 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -51,6 +51,20 @@
 			clock-frequency = <0>;
 		};
 
+		rtc_x1_clk: rtc_x1 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			/* If clk present, value must be set by board to 32678 */
+			clock-frequency = <0>;
+		};
+
+		rtc_x3_clk: rtc_x3 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			/* If clk present, value must be set by board to 4000000 */
+			clock-frequency = <0>;
+		};
+
 		/* Fixed factor clocks */
 		b_clk: b {
 			#clock-cells = <0>;
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 17/22] ARM: dts: r7s72100: add rtc to device tree

[Simon Horman]

From: Chris Brandt <chris.brandt@renesas.com>

Add the realtime clock device node.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 9db46ac08ba7..ab9ced453118 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -563,4 +563,18 @@
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
+
+	rtc: rtc@fcff1000 {
+		compatible = "renesas,r7s72100-rtc", "renesas,sh-rtc";
+		reg = <0xfcff1000 0x2e>;
+		interrupts = <GIC_SPI 276 IRQ_TYPE_EDGE_RISING
+			      GIC_SPI 277 IRQ_TYPE_EDGE_RISING
+			      GIC_SPI 278 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "alarm", "period", "carry";
+		clocks = <&mstp6_clks R7S72100_CLK_RTC>, <&rtc_x1_clk>,
+			 <&rtc_x3_clk>, <&extal_clk>;
+		clock-names = "fck", "rtc_x1", "rtc_x3", "extal";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
 };
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 17/22] ARM: dts: r7s72100: add rtc to device tree

[Simon Horman]

From: Chris Brandt <chris.brandt@renesas.com>

Add the realtime clock device node.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi
index 9db46ac08ba7..ab9ced453118 100644
--- a/arch/arm/boot/dts/r7s72100.dtsi
+++ b/arch/arm/boot/dts/r7s72100.dtsi
@@ -563,4 +563,18 @@
 		power-domains = <&cpg_clocks>;
 		status = "disabled";
 	};
+
+	rtc: rtc at fcff1000 {
+		compatible = "renesas,r7s72100-rtc", "renesas,sh-rtc";
+		reg = <0xfcff1000 0x2e>;
+		interrupts = <GIC_SPI 276 IRQ_TYPE_EDGE_RISING
+			      GIC_SPI 277 IRQ_TYPE_EDGE_RISING
+			      GIC_SPI 278 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "alarm", "period", "carry";
+		clocks = <&mstp6_clks R7S72100_CLK_RTC>, <&rtc_x1_clk>,
+			 <&rtc_x3_clk>, <&extal_clk>;
+		clock-names = "fck", "rtc_x1", "rtc_x3", "extal";
+		power-domains = <&cpg_clocks>;
+		status = "disabled";
+	};
 };
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 18/22] ARM: dts: rskrza1: set rtc_x1 clock value

[Simon Horman]

From: Chris Brandt <chris.brandt@renesas.com>

Enable the 32.768 kHz RTC_X1 clock by setting the frequency value to
non-zero.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100-rskrza1.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index 02b59c5b3c53..cab5857bfb41 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -43,6 +43,10 @@
 	clock-frequency = <48000000>;
 };
 
+&rtc_x1_clk {
+	clock-frequency = <32768>;
+};
+
 &mtu2 {
 	status = "okay";
 };
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 18/22] ARM: dts: rskrza1: set rtc_x1 clock value

[Simon Horman]

From: Chris Brandt <chris.brandt@renesas.com>

Enable the 32.768 kHz RTC_X1 clock by setting the frequency value to
non-zero.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100-rskrza1.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index 02b59c5b3c53..cab5857bfb41 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -43,6 +43,10 @@
 	clock-frequency = <48000000>;
 };
 
+&rtc_x1_clk {
+	clock-frequency = <32768>;
+};
+
 &mtu2 {
 	status = "okay";
 };
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 19/22] ARM: dts: rskrza1: add rtc DT support

[Simon Horman]

From: Chris Brandt <chris.brandt@renesas.com>

Enable the realtime clock.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100-rskrza1.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index cab5857bfb41..72df20a04320 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -73,6 +73,10 @@
 	status = "okay";
 };
 
+&rtc {
+	status = "okay";
+};
+
 &scif2 {
 	status = "okay";
 };
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 19/22] ARM: dts: rskrza1: add rtc DT support

[Simon Horman]

From: Chris Brandt <chris.brandt@renesas.com>

Enable the realtime clock.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100-rskrza1.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100-rskrza1.dts b/arch/arm/boot/dts/r7s72100-rskrza1.dts
index cab5857bfb41..72df20a04320 100644
--- a/arch/arm/boot/dts/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/r7s72100-rskrza1.dts
@@ -73,6 +73,10 @@
 	status = "okay";
 };
 
+&rtc {
+	status = "okay";
+};
+
 &scif2 {
 	status = "okay";
 };
-- 
2.7.0.rc3.207.g0ac5344

[GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.12

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these second round of Renesas ARM based SoC DT updates for
v4.12.

This pull request is based on the previous round of
such requests, tagged as renesas-dt-for-v4.12,
which you have already pulled.


The following changes since commit d01ff18992218f3a13f45f45a886b3bf8f250f14:

  ARM: dts: silk: Drop superfluous status update for frequency override (2017-03-13 10:19:35 +0100)

are available in the git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt2-for-v4.12

for you to fetch changes up to eb77d7260c4c25206e2a455be0dbe6443e0856b5:

  ARM: dts: r8a7791: Drop _clk suffix from external CAN clock node name (2017-04-05 14:16:34 -0400)

----------------------------------------------------------------
Second Round of Renesas ARM Based SoC DT Updates for v4.12

Corrections:
* Correct clock frequency of X2 DU clock input for r8a7791/koelsch board
* Correct Z clock for r8a7792 SoC
* Correct parent of SSI[0-9] clocks for r8a779[013] SoCs
* Correct ethernet clock parent on r7s72100 SoC
* Correct DU clock for r8a7794/silk board

Cleanups:
* Drop _clk suffix from external CAN clock node name on r8a779[01] SoCs

Enhancements:
* Enable rtc r7s72100/genmai board
* Add Z2 clock for r8a7794 SoC
* Add DU clock for r8a7794 SoC
* Add power-domains to SDHI for r8a7794 and r7s72100 SoCs
* Add reset control properties for r8a774[35] SoCs

----------------------------------------------------------------
Chris Brandt (7):
      ARM: dts: r7s72100: add power-domains to sdhi
      ARM: dts: r7s72100: fix ethernet clock parent
      ARM: dts: r7s72100: add rtc clock to device tree
      ARM: dts: r7s72100: add RTC_X clock inputs to device tree
      ARM: dts: r7s72100: add rtc to device tree
      ARM: dts: rskrza1: set rtc_x1 clock value
      ARM: dts: rskrza1: add rtc DT support

Geert Uytterhoeven (14):
      ARM: dts: r8a7743: Add reset control properties
      ARM: dts: r8a7745: Add reset control properties
      ARM: dts: r8a7794: Add DU1 clock to device tree
      ARM: dts: r8a7794: Correct clock of DU1
      ARM: dts: alt: Correct clock of DU1
      ARM: dts: silk: Correct clock of DU1
      ARM: dts: r8a7790: Correct parent of SSI[0-9] clocks
      ARM: dts: r8a7791: Correct parent of SSI[0-9] clocks
      ARM: dts: r8a7793: Correct parent of SSI[0-9] clocks
      ARM: dts: r8a7792: Correct Z clock
      ARM: dts: r8a7794: Add Z2 clock
      ARM: dts: koelsch: Correct clock frequency of X2 DU clock input
      ARM: dts: r8a7790: Drop _clk suffix from external CAN clock node name
      ARM: dts: r8a7791: Drop _clk suffix from external CAN clock node name

Jacopo Mondi (1):
      ARM: dts: genmai: Enable rtc and rtc_x1 clock

 arch/arm/boot/dts/r7s72100-genmai.dts      |  8 ++++++
 arch/arm/boot/dts/r7s72100-rskrza1.dts     |  8 ++++++
 arch/arm/boot/dts/r7s72100.dtsi            | 41 +++++++++++++++++++++++++++++-
 arch/arm/boot/dts/r8a7743.dtsi             | 24 +++++++++++++++++
 arch/arm/boot/dts/r8a7745.dtsi             | 24 +++++++++++++++++
 arch/arm/boot/dts/r8a7790.dtsi             |  9 ++++---
 arch/arm/boot/dts/r8a7791-koelsch.dts      |  2 +-
 arch/arm/boot/dts/r8a7791.dtsi             |  9 ++++---
 arch/arm/boot/dts/r8a7792.dtsi             | 11 ++++++--
 arch/arm/boot/dts/r8a7793.dtsi             |  7 +++--
 arch/arm/boot/dts/r8a7794-alt.dts          |  2 +-
 arch/arm/boot/dts/r8a7794-silk.dts         |  2 +-
 arch/arm/boot/dts/r8a7794.dtsi             | 18 ++++++++++---
 include/dt-bindings/clock/r7s72100-clock.h |  3 +++
 include/dt-bindings/clock/r8a7792-clock.h  |  1 -
 include/dt-bindings/clock/r8a7794-clock.h  |  1 +
 16 files changed, 151 insertions(+), 19 deletions(-)

[PATCH 20/22] ARM: dts: genmai: Enable rtc and rtc_x1 clock

[Simon Horman]

From: Jacopo Mondi <jacopo+renesas@jmondi.org>

Enable the 32.768 kHz RTC_X1 clock by setting the frequency value to
non-zero and enable the realtime clock.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100-genmai.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
index 118a8e2b86bd..52a7b586bac7 100644
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -44,6 +44,10 @@
 	clock-frequency = <48000000>;
 };
 
+&rtc_x1_clk {
+	clock-frequency = <32768>;
+};
+
 &mtu2 {
 	status = "okay";
 };
@@ -59,6 +63,10 @@
 	};
 };
 
+&rtc {
+	status = "okay";
+};
+
 &scif2 {
 	status = "okay";
 };
-- 
2.7.0.rc3.207.g0ac5344

[GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.12

[Simon Horman]

Hi Olof, Hi Kevin, Hi Arnd,

Please consider these second round of Renesas ARM based SoC DT updates for
v4.12.

This pull request is based on the previous round of
such requests, tagged as renesas-dt-for-v4.12,
which you have already pulled.


The following changes since commit d01ff18992218f3a13f45f45a886b3bf8f250f14:

  ARM: dts: silk: Drop superfluous status update for frequency override (2017-03-13 10:19:35 +0100)

are available in the git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt2-for-v4.12

for you to fetch changes up to eb77d7260c4c25206e2a455be0dbe6443e0856b5:

  ARM: dts: r8a7791: Drop _clk suffix from external CAN clock node name (2017-04-05 14:16:34 -0400)

----------------------------------------------------------------
Second Round of Renesas ARM Based SoC DT Updates for v4.12

Corrections:
* Correct clock frequency of X2 DU clock input for r8a7791/koelsch board
* Correct Z clock for r8a7792 SoC
* Correct parent of SSI[0-9] clocks for r8a779[013] SoCs
* Correct ethernet clock parent on r7s72100 SoC
* Correct DU clock for r8a7794/silk board

Cleanups:
* Drop _clk suffix from external CAN clock node name on r8a779[01] SoCs

Enhancements:
* Enable rtc r7s72100/genmai board
* Add Z2 clock for r8a7794 SoC
* Add DU clock for r8a7794 SoC
* Add power-domains to SDHI for r8a7794 and r7s72100 SoCs
* Add reset control properties for r8a774[35] SoCs

----------------------------------------------------------------
Chris Brandt (7):
      ARM: dts: r7s72100: add power-domains to sdhi
      ARM: dts: r7s72100: fix ethernet clock parent
      ARM: dts: r7s72100: add rtc clock to device tree
      ARM: dts: r7s72100: add RTC_X clock inputs to device tree
      ARM: dts: r7s72100: add rtc to device tree
      ARM: dts: rskrza1: set rtc_x1 clock value
      ARM: dts: rskrza1: add rtc DT support

Geert Uytterhoeven (14):
      ARM: dts: r8a7743: Add reset control properties
      ARM: dts: r8a7745: Add reset control properties
      ARM: dts: r8a7794: Add DU1 clock to device tree
      ARM: dts: r8a7794: Correct clock of DU1
      ARM: dts: alt: Correct clock of DU1
      ARM: dts: silk: Correct clock of DU1
      ARM: dts: r8a7790: Correct parent of SSI[0-9] clocks
      ARM: dts: r8a7791: Correct parent of SSI[0-9] clocks
      ARM: dts: r8a7793: Correct parent of SSI[0-9] clocks
      ARM: dts: r8a7792: Correct Z clock
      ARM: dts: r8a7794: Add Z2 clock
      ARM: dts: koelsch: Correct clock frequency of X2 DU clock input
      ARM: dts: r8a7790: Drop _clk suffix from external CAN clock node name
      ARM: dts: r8a7791: Drop _clk suffix from external CAN clock node name

Jacopo Mondi (1):
      ARM: dts: genmai: Enable rtc and rtc_x1 clock

 arch/arm/boot/dts/r7s72100-genmai.dts      |  8 ++++++
 arch/arm/boot/dts/r7s72100-rskrza1.dts     |  8 ++++++
 arch/arm/boot/dts/r7s72100.dtsi            | 41 +++++++++++++++++++++++++++++-
 arch/arm/boot/dts/r8a7743.dtsi             | 24 +++++++++++++++++
 arch/arm/boot/dts/r8a7745.dtsi             | 24 +++++++++++++++++
 arch/arm/boot/dts/r8a7790.dtsi             |  9 ++++---
 arch/arm/boot/dts/r8a7791-koelsch.dts      |  2 +-
 arch/arm/boot/dts/r8a7791.dtsi             |  9 ++++---
 arch/arm/boot/dts/r8a7792.dtsi             | 11 ++++++--
 arch/arm/boot/dts/r8a7793.dtsi             |  7 +++--
 arch/arm/boot/dts/r8a7794-alt.dts          |  2 +-
 arch/arm/boot/dts/r8a7794-silk.dts         |  2 +-
 arch/arm/boot/dts/r8a7794.dtsi             | 18 ++++++++++---
 include/dt-bindings/clock/r7s72100-clock.h |  3 +++
 include/dt-bindings/clock/r8a7792-clock.h  |  1 -
 include/dt-bindings/clock/r8a7794-clock.h  |  1 +
 16 files changed, 151 insertions(+), 19 deletions(-)

[PATCH 20/22] ARM: dts: genmai: Enable rtc and rtc_x1 clock

[Simon Horman]

From: Jacopo Mondi <jacopo+renesas@jmondi.org>

Enable the 32.768 kHz RTC_X1 clock by setting the frequency value to
non-zero and enable the realtime clock.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r7s72100-genmai.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
index 118a8e2b86bd..52a7b586bac7 100644
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -44,6 +44,10 @@
 	clock-frequency = <48000000>;
 };
 
+&rtc_x1_clk {
+	clock-frequency = <32768>;
+};
+
 &mtu2 {
 	status = "okay";
 };
@@ -59,6 +63,10 @@
 	};
 };
 
+&rtc {
+	status = "okay";
+};
+
 &scif2 {
 	status = "okay";
 };
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 21/22] ARM: dts: r8a7790: Drop _clk suffix from external CAN clock node name

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The current practice is to not add _clk suffixes to clock node names in
DT, as these names are used as the actual clock names.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index fe6b8c2a2d71..99269aaca6fc 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1101,7 +1101,7 @@
 		};
 
 		/* External CAN clock */
-		can_clk: can_clk {
+		can_clk: can {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			/* This value must be overridden by the board. */
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 21/22] ARM: dts: r8a7790: Drop _clk suffix from external CAN clock node name

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The current practice is to not add _clk suffixes to clock node names in
DT, as these names are used as the actual clock names.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7790.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index fe6b8c2a2d71..99269aaca6fc 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -1101,7 +1101,7 @@
 		};
 
 		/* External CAN clock */
-		can_clk: can_clk {
+		can_clk: can {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			/* This value must be overridden by the board. */
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 22/22] ARM: dts: r8a7791: Drop _clk suffix from external CAN clock node name

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The current practice is to not add _clk suffixes to clock node names in
DT, as these names are used as the actual clock names.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index a6478ca3f4ca..4d0c2ce59900 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1126,7 +1126,7 @@
 		};
 
 		/* External CAN clock */
-		can_clk: can_clk {
+		can_clk: can {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			/* This value must be overridden by the board. */
-- 
2.7.0.rc3.207.g0ac5344

[PATCH 22/22] ARM: dts: r8a7791: Drop _clk suffix from external CAN clock node name

[Simon Horman]

From: Geert Uytterhoeven <geert+renesas@glider.be>

The current practice is to not add _clk suffixes to clock node names in
DT, as these names are used as the actual clock names.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index a6478ca3f4ca..4d0c2ce59900 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1126,7 +1126,7 @@
 		};
 
 		/* External CAN clock */
-		can_clk: can_clk {
+		can_clk: can {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			/* This value must be overridden by the board. */
-- 
2.7.0.rc3.207.g0ac5344

Re: [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.12

[Olof Johansson]

On Fri, Apr 07, 2017 at 11:58:21AM -0400, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these second round of Renesas ARM based SoC DT updates for
> v4.12.
> 
> This pull request is based on the previous round of
> such requests, tagged as renesas-dt-for-v4.12,
> which you have already pulled.
> 
> 
> The following changes since commit d01ff18992218f3a13f45f45a886b3bf8f250f14:
> 
>   ARM: dts: silk: Drop superfluous status update for frequency override (2017-03-13 10:19:35 +0100)
> 
> are available in the git repository at:
> 
>   https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt2-for-v4.12
> 
> for you to fetch changes up to eb77d7260c4c25206e2a455be0dbe6443e0856b5:
> 
>   ARM: dts: r8a7791: Drop _clk suffix from external CAN clock node name (2017-04-05 14:16:34 -0400)
> 
> ----------------------------------------------------------------
> Second Round of Renesas ARM Based SoC DT Updates for v4.12
> 
> Corrections:
> * Correct clock frequency of X2 DU clock input for r8a7791/koelsch board
> * Correct Z clock for r8a7792 SoC
> * Correct parent of SSI[0-9] clocks for r8a779[013] SoCs
> * Correct ethernet clock parent on r7s72100 SoC
> * Correct DU clock for r8a7794/silk board
> 
> Cleanups:
> * Drop _clk suffix from external CAN clock node name on r8a779[01] SoCs
> 
> Enhancements:
> * Enable rtc r7s72100/genmai board
> * Add Z2 clock for r8a7794 SoC
> * Add DU clock for r8a7794 SoC
> * Add power-domains to SDHI for r8a7794 and r7s72100 SoCs
> * Add reset control properties for r8a774[35] SoCs

Merged, thanks!


-Olof

[GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.12

[Olof Johansson]

On Fri, Apr 07, 2017 at 11:58:21AM -0400, Simon Horman wrote:
> Hi Olof, Hi Kevin, Hi Arnd,
> 
> Please consider these second round of Renesas ARM based SoC DT updates for
> v4.12.
> 
> This pull request is based on the previous round of
> such requests, tagged as renesas-dt-for-v4.12,
> which you have already pulled.
> 
> 
> The following changes since commit d01ff18992218f3a13f45f45a886b3bf8f250f14:
> 
>   ARM: dts: silk: Drop superfluous status update for frequency override (2017-03-13 10:19:35 +0100)
> 
> are available in the git repository at:
> 
>   https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt2-for-v4.12
> 
> for you to fetch changes up to eb77d7260c4c25206e2a455be0dbe6443e0856b5:
> 
>   ARM: dts: r8a7791: Drop _clk suffix from external CAN clock node name (2017-04-05 14:16:34 -0400)
> 
> ----------------------------------------------------------------
> Second Round of Renesas ARM Based SoC DT Updates for v4.12
> 
> Corrections:
> * Correct clock frequency of X2 DU clock input for r8a7791/koelsch board
> * Correct Z clock for r8a7792 SoC
> * Correct parent of SSI[0-9] clocks for r8a779[013] SoCs
> * Correct ethernet clock parent on r7s72100 SoC
> * Correct DU clock for r8a7794/silk board
> 
> Cleanups:
> * Drop _clk suffix from external CAN clock node name on r8a779[01] SoCs
> 
> Enhancements:
> * Enable rtc r7s72100/genmai board
> * Add Z2 clock for r8a7794 SoC
> * Add DU clock for r8a7794 SoC
> * Add power-domains to SDHI for r8a7794 and r7s72100 SoCs
> * Add reset control properties for r8a774[35] SoCs

Merged, thanks!


-Olof