All of lore.kernel.org
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Alexandru Ardelean <alexandru.ardelean@analog.com>,
	linux-hwmon@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: robh+dt@kernel.org, jdelvare@suse.com, mark.thoren@analog.com,
	ardeleanalex@gmail.com
Subject: Re: [PATCH v2 2/4] docs: hwmon: (ltc2945): change type of val to ULL in ltc2945_val_to_reg()
Date: Wed, 11 Nov 2020 06:54:03 -0800	[thread overview]
Message-ID: <41f86559-9165-40f9-e7f3-3e7f5eca7315@roeck-us.net> (raw)
In-Reply-To: <20201111091259.46773-3-alexandru.ardelean@analog.com>

On 11/11/20 1:12 AM, Alexandru Ardelean wrote:
> In order to account for any potential overflows that could occur.
> 
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>

Thinking about it, this can only really happen if the user provides
excessive values for limit attributes. Those are currently clamped
later, after the conversion. I think it would be better to modify
the code to apply a clamp _before_ the conversion as well instead
of trying to solve the overflow problem with unsigned long long.

Either case, can you send me a register dump for this chip ?
I'd like to write a module test script to actually check if there
are any over/underflows or other problems.

Thanks,
Guenter

> ---
>  drivers/hwmon/ltc2945.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/hwmon/ltc2945.c b/drivers/hwmon/ltc2945.c
> index 1cea710df668..6d4569a25471 100644
> --- a/drivers/hwmon/ltc2945.c
> +++ b/drivers/hwmon/ltc2945.c
> @@ -155,7 +155,7 @@ static long long ltc2945_reg_to_val(struct device *dev, u8 reg)
>  }
>  
>  static int ltc2945_val_to_reg(struct device *dev, u8 reg,
> -			      unsigned long val)
> +			      unsigned long long val)
>  {
>  	struct ltc2945_state *st = dev_get_drvdata(dev);
>  	struct regmap *regmap = st->regmap;
> @@ -181,14 +181,14 @@ static int ltc2945_val_to_reg(struct device *dev, u8 reg,
>  			return ret;
>  		if (control & CONTROL_MULT_SELECT) {
>  			/* 25 mV * 25 uV = 0.625 uV resolution. */
> -			val = DIV_ROUND_CLOSEST(val, 625);
> +			val = DIV_ROUND_CLOSEST_ULL(val, 625);
>  		} else {
>  			/*
>  			 * 0.5 mV * 25 uV = 0.0125 uV resolution.
>  			 * Divide first to avoid overflow;
>  			 * accept loss of accuracy.
>  			 */
> -			val = DIV_ROUND_CLOSEST(val, 25) * 2;
> +			val = DIV_ROUND_CLOSEST_ULL(val, 25) * 2;
>  		}
>  		break;
>  	case LTC2945_VIN_H:
> @@ -197,7 +197,7 @@ static int ltc2945_val_to_reg(struct device *dev, u8 reg,
>  	case LTC2945_MAX_VIN_THRES_H:
>  	case LTC2945_MIN_VIN_THRES_H:
>  		/* 25 mV resolution. */
> -		val /= 25;
> +		val = div_u64(val, 25);
>  		break;
>  	case LTC2945_ADIN_H:
>  	case LTC2945_MAX_ADIN_H:
> @@ -219,7 +219,7 @@ static int ltc2945_val_to_reg(struct device *dev, u8 reg,
>  		 * dividing the reported current by the sense resistor value
>  		 * in mOhm.
>  		 */
> -		val = DIV_ROUND_CLOSEST(val, 25);
> +		val = DIV_ROUND_CLOSEST_ULL(val, 25);
>  		break;
>  	default:
>  		return -EINVAL;
> @@ -247,7 +247,7 @@ static ssize_t ltc2945_value_store(struct device *dev,
>  	struct ltc2945_state *st = dev_get_drvdata(dev);
>  	struct regmap *regmap = st->regmap;
>  	u8 reg = attr->index;
> -	unsigned long val;
> +	unsigned long long val;
>  	u8 regbuf[3];
>  	int num_regs;
>  	int regval;
> 


  reply	other threads:[~2020-11-11 14:54 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-11  9:12 [PATCH v2 0/4] hwmon: (ltc2945): add support for sense resistor Alexandru Ardelean
2020-11-11  9:12 ` [PATCH v2 1/4] hwmon: (ltc2945): wrap regmap into an ltc2945_state struct Alexandru Ardelean
2020-11-11  9:12 ` [PATCH v2 2/4] docs: hwmon: (ltc2945): change type of val to ULL in ltc2945_val_to_reg() Alexandru Ardelean
2020-11-11 14:54   ` Guenter Roeck [this message]
2020-11-11 15:28     ` Alexandru Ardelean
2020-11-11 15:44       ` Guenter Roeck
2020-11-18 14:40     ` Alexandru Ardelean
2020-11-18 15:19       ` Guenter Roeck
2020-11-13  7:25   ` kernel test robot
2020-11-11  9:12 ` [PATCH v2 3/4] hwmon: (ltc2945): add support for sense resistor Alexandru Ardelean
2020-11-18 14:43   ` Alexandru Ardelean
2020-11-18 15:21     ` Guenter Roeck
2020-11-11  9:12 ` [PATCH v2 4/4] dt-bindings: hwmon: ltc2945: add device tree doc for ltc2945 Alexandru Ardelean
2020-11-16 17:36   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=41f86559-9165-40f9-e7f3-3e7f5eca7315@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=alexandru.ardelean@analog.com \
    --cc=ardeleanalex@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jdelvare@suse.com \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.thoren@analog.com \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH v2 2/4] docs: hwmon: (ltc2945): change type of val to ULL in ltc2945_val_to_reg()' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.