Re: [RFC v4 1/9] block: add block layer APIs resembling Linux ZonedBlockDevice ioctls.

[Damien Le Moal <damien.lemoal@opensource.wdc.com>]

On 7/12/22 11:13, Sam Li wrote:
> By adding zone management operations in BlockDriver, storage
> controller emulation can use the new block layer APIs including
> zone_report and zone_mgmt(open, close, finish, reset).
> 
> Signed-off-by: Sam Li <faithilikerun@gmail.com>
> ---
>  block/block-backend.c            |  41 ++++++
>  block/coroutines.h               |   5 +
>  block/file-posix.c               | 236 +++++++++++++++++++++++++++++++
>  include/block/block-common.h     |  43 +++++-
>  include/block/block_int-common.h |  20 +++
>  5 files changed, 344 insertions(+), 1 deletion(-)
> 
> diff --git a/block/block-backend.c b/block/block-backend.c
> index f425b00793..0a05247ae4 100644
> --- a/block/block-backend.c
> +++ b/block/block-backend.c
> @@ -1806,6 +1806,47 @@ int blk_flush(BlockBackend *blk)
>      return ret;
>  }
>  
> +/*
> + * Send a zone_report command.
> + * offset can be any number within the zone size. No alignment for offset.
> + * nr_zones represents IN maximum and OUT actual.
> + */
> +int coroutine_fn blk_co_zone_report(BlockBackend *blk, int64_t offset,
> +                                    int64_t *nr_zones,
> +                                    BlockZoneDescriptor *zones)
> +{
> +    int ret;
> +    IO_CODE();
> +
> +    blk_inc_in_flight(blk); /* increase before waiting */
> +    blk_wait_while_drained(blk);
> +    ret = bdrv_co_zone_report(blk->root->bs, offset, nr_zones, zones);
> +    blk_dec_in_flight(blk);
> +    return ret;
> +}
> +
> +/*
> + * Send a zone_management command.
> + * Offset is the start of a zone and len is aligned to zones.
> + */
> +int coroutine_fn blk_co_zone_mgmt(BlockBackend *blk, enum zone_op op,
> +        int64_t offset, int64_t len)
> +{
> +    int ret;
> +    IO_CODE();
> +
> +    blk_inc_in_flight(blk);
> +    blk_wait_while_drained(blk);
> +    ret = blk_check_byte_request(blk, offset, len);
> +    if (ret < 0) {
> +        return ret;

You missed adding "blk_dec_in_flight(blk);" before return here. But I
think you can move the call to blk_check_byte_request() before
blk_inc_in_flight() to avoid having to call blk_dec_in_flight().

> +    }
> +
> +    ret = bdrv_co_zone_mgmt(blk->root->bs, op, offset, len);
> +    blk_dec_in_flight(blk);
> +    return ret;
> +}
> +
>  void blk_drain(BlockBackend *blk)
>  {
>      BlockDriverState *bs = blk_bs(blk);
> diff --git a/block/coroutines.h b/block/coroutines.h
> index 830ecaa733..19aa96cc56 100644
> --- a/block/coroutines.h
> +++ b/block/coroutines.h
> @@ -80,6 +80,11 @@ int coroutine_fn
>  blk_co_do_pdiscard(BlockBackend *blk, int64_t offset, int64_t bytes);
>  
>  int coroutine_fn blk_co_do_flush(BlockBackend *blk);
> +int coroutine_fn blk_co_zone_report(BlockBackend *blk, int64_t offset,
> +                                    int64_t *nr_zones,
> +                                    BlockZoneDescriptor *zones);
> +int coroutine_fn blk_co_zone_mgmt(BlockBackend *blk, enum zone_op op,
> +                                  int64_t offset, int64_t len);
>  
>  
>  /*
> diff --git a/block/file-posix.c b/block/file-posix.c
> index 48cd096624..e7523ae2ed 100644
> --- a/block/file-posix.c
> +++ b/block/file-posix.c
> @@ -67,6 +67,7 @@
>  #include <sys/param.h>
>  #include <sys/syscall.h>
>  #include <sys/vfs.h>
> +#include <linux/blkzoned.h>

You need to conditionally include this because not all kernels provide
this file. Old kernels will not have it. So you need something like:

#if defined(CONFIG_BLKZONED)
#include <linux/blkzoned.h>
#endif

And adding this to meson.build should do the trick:

diff --git a/meson.build b/meson.build
index 65a885ea69..31d8852a35 100644
--- a/meson.build
+++ b/meson.build
@@ -1869,6 +1869,7 @@ config_host_data.set('CONFIG_REPLICATION',
get_option('live_block_migration').al

 # has_header
 config_host_data.set('CONFIG_EPOLL', cc.has_header('sys/epoll.h'))
+config_host_data.set('CONFIG_BLKZONED', cc.has_header('linux/blkzoned.h'))
 config_host_data.set('CONFIG_LINUX_MAGIC_H', cc.has_header('linux/magic.h'))
 config_host_data.set('CONFIG_VALGRIND_H',
cc.has_header('valgrind/valgrind.h'))
 config_host_data.set('HAVE_BTRFS_H', cc.has_header('linux/btrfs.h'))

Then in build/config-host.h, you will see "#define CONFIG_BLKZONED". You
then can use "#if defined(CONFIG_BLKZONED)" to conditionally define the
code related to zoned devices.

To test all this, temporarily rename your host
/usr/include/linux/blkzoned.h file to some other name, configure qemu and
see if it compiles.

>  #include <linux/cdrom.h>
>  #include <linux/fd.h>
>  #include <linux/fs.h>
> @@ -216,6 +217,13 @@ typedef struct RawPosixAIOData {
>              PreallocMode prealloc;
>              Error **errp;
>          } truncate;
> +        struct {
> +            int64_t *nr_zones;
> +            BlockZoneDescriptor *zones;
> +        } zone_report;
> +        struct {
> +            zone_op op;
> +        } zone_mgmt;
>      };
>  } RawPosixAIOData;
>  
> @@ -1801,6 +1809,130 @@ static off_t copy_file_range(int in_fd, off_t *in_off, int out_fd,
>  }
>  #endif
>  
> +/*
> + * parse_zone - Fill a zone descriptor
> + */
> +static inline void parse_zone(struct BlockZoneDescriptor *zone,
> +                              struct blk_zone *blkz) {
> +    zone->start = blkz->start;
> +    zone->length = blkz->len;
> +    zone->cap = blkz->capacity;
> +    zone->wp = blkz->wp - blkz->start;
> +    zone->type = blkz->type;
> +    zone->cond = blkz->cond;
> +}
> +
> +static int handle_aiocb_zone_report(void *opaque) {
> +    RawPosixAIOData *aiocb = opaque;
> +    int fd = aiocb->aio_fildes;
> +    int64_t *nr_zones = aiocb->zone_report.nr_zones;
> +    BlockZoneDescriptor *zones = aiocb->zone_report.zones;
> +    int64_t offset = aiocb->aio_offset;
> +
> +    struct blk_zone *blkz;
> +    int64_t rep_size, nrz;
> +    int ret, n = 0, i = 0;
> +
> +    nrz = *nr_zones;
> +    rep_size = sizeof(struct blk_zone_report) + nrz * sizeof(struct blk_zone);
> +    g_autofree struct blk_zone_report *rep = NULL;
> +    rep = g_malloc(rep_size);
> +    offset = offset / 512; /* get the unit of the start sector: sector size is 512 bytes. */
> +    printf("start to report zone with offset: 0x%lx\n", offset);
> +
> +    blkz = (struct blk_zone *)(rep + 1);
> +    while (n < nrz) {
> +        memset(rep, 0, rep_size);
> +        rep->sector = offset;
> +        rep->nr_zones = nrz;
> +
> +        ret = ioctl(fd, BLKREPORTZONE, rep);
> +        if (ret != 0) {
> +            ret = -errno;
> +            error_report("%d: ioctl BLKREPORTZONE at %ld failed %d",
> +                         fd, offset, errno);
> +            return ret;
> +        }
> +
> +        if (!rep->nr_zones) {
> +            break;
> +        }
> +
> +        for (i = 0; i < rep->nr_zones; i++, n++) {
> +            parse_zone(&zones[n], &blkz[i]);
> +            /* The next report should start after the last zone reported */
> +            offset = blkz[i].start + blkz[i].len;
> +        }
> +    }
> +
> +    *nr_zones = n;
> +    return 0;
> +}
> +
> +static int handle_aiocb_zone_mgmt(void *opaque) {
> +    RawPosixAIOData *aiocb = opaque;
> +    int fd = aiocb->aio_fildes;
> +    int64_t offset = aiocb->aio_offset;
> +    int64_t len = aiocb->aio_nbytes;
> +    zone_op op = aiocb->zone_mgmt.op;
> +
> +    struct blk_zone_range range;
> +    const char *ioctl_name;
> +    unsigned long ioctl_op;
> +    int64_t zone_size;
> +    int64_t zone_size_mask;
> +    int ret;
> +
> +    g_autofree struct stat *file = NULL;
> +    file = g_new(struct stat, 1);
> +    stat(s->filename, file);
> +    zone_size = get_sysfs_long_val(fd, file, "chunk_sectors");
> +    zone_size_mask = zone_size - 1;
> +    if (offset & zone_size_mask) {
> +        error_report("offset is not the start of a zone");
> +        return -EINVAL;
> +    }
> +
> +    if (len & zone_size_mask) {
> +        error_report("len is not aligned to zones");
> +        return -EINVAL;
> +    }
> +
> +    switch (op) {
> +    case zone_open:
> +        ioctl_name = "BLKOPENZONE";
> +        ioctl_op = BLKOPENZONE;
> +        break;
> +    case zone_close:
> +        ioctl_name = "BLKCLOSEZONE";
> +        ioctl_op = BLKCLOSEZONE;
> +        break;
> +    case zone_finish:
> +        ioctl_name = "BLKFINISHZONE";
> +        ioctl_op = BLKFINISHZONE;
> +        break;
> +    case zone_reset:
> +        ioctl_name = "BLKRESETZONE";
> +        ioctl_op = BLKRESETZONE;
> +        break;
> +    default:
> +        error_report("Invalid zone operation 0x%x", op);
> +        return -EINVAL;
> +    }
> +
> +    /* Execute the operation */
> +    range.sector = offset;
> +    range.nr_sectors = len;
> +    ret = ioctl(fd, ioctl_op, &range);
> +    if (ret != 0) {
> +        error_report("ioctl %s failed %d",
> +                     ioctl_name, errno);
> +        return -errno;
> +    }
> +
> +    return 0;
> +}
> +
>  static int handle_aiocb_copy_range(void *opaque)
>  {
>      RawPosixAIOData *aiocb = opaque;
> @@ -2973,6 +3105,59 @@ static void raw_account_discard(BDRVRawState *s, uint64_t nbytes, int ret)
>      }
>  }
>  
> +/*
> + * zone report - Get a zone block device's information in the form
> + * of an array of zone descriptors.
> + *
> + * @param bs: passing zone block device file descriptor
> + * @param zones: an array of zone descriptors to hold zone
> + * information on reply
> + * @param offset: offset can be any byte within the zone size.
> + * @param len: (not sure yet.
> + * @return 0 on success, -1 on failure
> + */
> +static int coroutine_fn raw_co_zone_report(BlockDriverState *bs, int64_t offset,
> +                                           int64_t *nr_zones,
> +                                           BlockZoneDescriptor *zones) {
> +    BDRVRawState *s = bs->opaque;
> +    RawPosixAIOData acb;
> +
> +    acb = (RawPosixAIOData) {
> +        .bs         = bs,
> +        .aio_fildes = s->fd,
> +        .aio_type   = QEMU_AIO_IOCTL,
> +        .aio_offset = offset,
> +        .zone_report    = {
> +                .nr_zones       = nr_zones,
> +                .zones          = zones,
> +        },
> +    };
> +
> +    return raw_thread_pool_submit(bs, handle_aiocb_zone_report, &acb);
> +}
> +
> +/*
> + * zone management operations - Execute an operation on a zone
> + */
> +static int coroutine_fn raw_co_zone_mgmt(BlockDriverState *bs, zone_op op,
> +        int64_t offset, int64_t len) {
> +    BDRVRawState *s = bs->opaque;
> +    RawPosixAIOData acb;
> +
> +    acb = (RawPosixAIOData) {
> +        .bs             = bs,
> +        .aio_fildes     = s->fd,
> +        .aio_type       = QEMU_AIO_IOCTL,
> +        .aio_offset     = offset,
> +        .aio_nbytes     = len,
> +        .zone_mgmt  = {
> +                .op = op,
> +        },
> +    };
> +
> +    return raw_thread_pool_submit(bs, handle_aiocb_zone_mgmt, &acb);
> +}
> +
>  static coroutine_fn int
>  raw_do_pdiscard(BlockDriverState *bs, int64_t offset, int64_t bytes,
>                  bool blkdev)
> @@ -3324,6 +3509,9 @@ BlockDriver bdrv_file = {
>      .bdrv_abort_perm_update = raw_abort_perm_update,
>      .create_opts = &raw_create_opts,
>      .mutable_opts = mutable_opts,
> +
> +    .bdrv_co_zone_report = raw_co_zone_report,
> +    .bdrv_co_zone_mgmt = raw_co_zone_mgmt,
>  };
>  
>  /***********************************************/
> @@ -3703,6 +3891,53 @@ static BlockDriver bdrv_host_device = {
>  #endif
>  };
>  
> +static BlockDriver bdrv_zoned_host_device = {
> +        .format_name = "zoned_host_device",
> +        .protocol_name = "zoned_host_device",
> +        .instance_size = sizeof(BDRVRawState),
> +        .bdrv_needs_filename = true,
> +        .bdrv_probe_device  = hdev_probe_device,
> +        .bdrv_parse_filename = hdev_parse_filename,
> +        .bdrv_file_open     = hdev_open,
> +        .bdrv_close         = raw_close,
> +        .bdrv_reopen_prepare = raw_reopen_prepare,
> +        .bdrv_reopen_commit  = raw_reopen_commit,
> +        .bdrv_reopen_abort   = raw_reopen_abort,
> +        .bdrv_co_create_opts = bdrv_co_create_opts_simple,
> +        .create_opts         = &bdrv_create_opts_simple,
> +        .mutable_opts        = mutable_opts,
> +        .bdrv_co_invalidate_cache = raw_co_invalidate_cache,
> +        .bdrv_co_pwrite_zeroes = hdev_co_pwrite_zeroes,
> +
> +        .bdrv_co_preadv         = raw_co_preadv,
> +        .bdrv_co_pwritev        = raw_co_pwritev,
> +        .bdrv_co_flush_to_disk  = raw_co_flush_to_disk,
> +        .bdrv_co_pdiscard       = hdev_co_pdiscard,
> +        .bdrv_co_copy_range_from = raw_co_copy_range_from,
> +        .bdrv_co_copy_range_to  = raw_co_copy_range_to,
> +        .bdrv_refresh_limits = raw_refresh_limits,
> +        .bdrv_io_plug = raw_aio_plug,
> +        .bdrv_io_unplug = raw_aio_unplug,
> +        .bdrv_attach_aio_context = raw_aio_attach_aio_context,
> +
> +        .bdrv_co_truncate       = raw_co_truncate,
> +        .bdrv_getlength = raw_getlength,
> +        .bdrv_get_info = raw_get_info,
> +        .bdrv_get_allocated_file_size
> +                            = raw_get_allocated_file_size,
> +        .bdrv_get_specific_stats = hdev_get_specific_stats,
> +        .bdrv_check_perm = raw_check_perm,
> +        .bdrv_set_perm   = raw_set_perm,
> +        .bdrv_abort_perm_update = raw_abort_perm_update,
> +        .bdrv_probe_blocksizes = hdev_probe_blocksizes,
> +        .bdrv_probe_geometry = hdev_probe_geometry,
> +        .bdrv_co_ioctl = hdev_co_ioctl,
> +
> +        /* zone management operations */
> +        .bdrv_co_zone_report = raw_co_zone_report,
> +        .bdrv_co_zone_mgmt = raw_co_zone_mgmt,
> +};
> +
>  #if defined(__linux__) || defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
>  static void cdrom_parse_filename(const char *filename, QDict *options,
>                                   Error **errp)
> @@ -3964,6 +4199,7 @@ static void bdrv_file_init(void)
>  #if defined(HAVE_HOST_BLOCK_DEVICE)
>      bdrv_register(&bdrv_host_device);
>  #ifdef __linux__
> +    bdrv_register(&bdrv_zoned_host_device);
>      bdrv_register(&bdrv_host_cdrom);
>  #endif
>  #if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
> diff --git a/include/block/block-common.h b/include/block/block-common.h
> index fdb7306e78..78cddeeda5 100644
> --- a/include/block/block-common.h
> +++ b/include/block/block-common.h
> @@ -23,7 +23,6 @@
>   */
>  #ifndef BLOCK_COMMON_H
>  #define BLOCK_COMMON_H
> -
>  #include "block/aio.h"
>  #include "block/aio-wait.h"
>  #include "qemu/iov.h"
> @@ -49,6 +48,48 @@ typedef struct BlockDriver BlockDriver;
>  typedef struct BdrvChild BdrvChild;
>  typedef struct BdrvChildClass BdrvChildClass;
>  
> +typedef enum zone_op {
> +    zone_open,
> +    zone_close,
> +    zone_finish,
> +    zone_reset,
> +} zone_op;
> +
> +typedef enum zone_model {
> +    BLK_Z_HM,
> +    BLK_Z_HA,
> +} zone_model;
> +
> +typedef enum BlkZoneCondition {
> +    BLK_ZS_NOT_WP = 0x0,
> +    BLK_ZS_EMPTY = 0x1,
> +    BLK_ZS_IOPEN = 0x2,
> +    BLK_ZS_EOPEN = 0x3,
> +    BLK_ZS_CLOSED = 0x4,
> +    BLK_ZS_RDONLY = 0xD,
> +    BLK_ZS_FULL = 0xE,
> +    BLK_ZS_OFFLINE = 0xF,
> +} BlkZoneCondition;
> +
> +typedef enum BlkZoneType {
> +    BLK_ZT_CONV = 0x1,
> +    BLK_ZT_SWR = 0x2,
> +    BLK_ZT_SWP = 0x3,
> +} BlkZoneType;
> +
> +/*
> + * Zone descriptor data structure.
> + * Provide information on a zone with all position and size values in bytes.
> + */
> +typedef struct BlockZoneDescriptor {
> +    uint64_t start;
> +    uint64_t length;
> +    uint64_t cap;
> +    uint64_t wp;
> +    BlkZoneType type;
> +    BlkZoneCondition cond;
> +} BlockZoneDescriptor;
> +
>  typedef struct BlockDriverInfo {
>      /* in bytes, 0 if irrelevant */
>      int cluster_size;
> diff --git a/include/block/block_int-common.h b/include/block/block_int-common.h
> index 8947abab76..6037871089 100644
> --- a/include/block/block_int-common.h
> +++ b/include/block/block_int-common.h
> @@ -94,6 +94,20 @@ typedef struct BdrvTrackedRequest {
>      struct BdrvTrackedRequest *waiting_for;
>  } BdrvTrackedRequest;
>  
> +/**
> + * Zone device information data structure.
> + * Provide information on a device.
> + */
> +typedef struct zbd_dev {
> +    uint32_t zone_size;
> +    zone_model model;
> +    uint32_t block_size;
> +    uint32_t write_granularity;
> +    uint32_t nr_zones;
> +    struct BlockZoneDescriptor *zones; /* array of zones */
> +    uint32_t max_nr_open_zones; /* maximum number of explicitly open zones */
> +    uint32_t max_nr_active_zones;
> +} zbd_dev;
>  
>  struct BlockDriver {
>      /*
> @@ -691,6 +705,12 @@ struct BlockDriver {
>                                            QEMUIOVector *qiov,
>                                            int64_t pos);
>  
> +    int coroutine_fn (*bdrv_co_zone_report)(BlockDriverState *bs,
> +            int64_t offset, int64_t *nr_zones,
> +            BlockZoneDescriptor *zones);
> +    int coroutine_fn (*bdrv_co_zone_mgmt)(BlockDriverState *bs, enum zone_op op,
> +            int64_t offset, int64_t len);
> +
>      /* removable device specific */
>      bool (*bdrv_is_inserted)(BlockDriverState *bs);
>      void (*bdrv_eject)(BlockDriverState *bs, bool eject_flag);


-- 
Damien Le Moal
Western Digital Research