From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S964783AbXA3Ko4 (ORCPT ); Tue, 30 Jan 2007 05:44:56 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S964923AbXA3Ko4 (ORCPT ); Tue, 30 Jan 2007 05:44:56 -0500 Received: from server077.de-nserver.de ([62.27.12.245]:55253 "EHLO server077.de-nserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S964783AbXA3Kow (ORCPT ); Tue, 30 Jan 2007 05:44:52 -0500 Message-ID: <45BF218C.1080902@profihost.com> Date: Tue, 30 Jan 2007 11:44:28 +0100 From: Stefan Priebe - FH User-Agent: Thunderbird 1.5.0.9 (Windows/20061207) MIME-Version: 1.0 To: Stefan Priebe - FH CC: Luming Yu , Stephen Evanchik , linux-kernel@vger.kernel.org Subject: Re: SATA ahci Bug in 2.6.19.x References: <45B46FA0.2060901@profihost.com> <3877989d0701251925i8bbc09emd8dcad8d098195d2@mail.gmail.com> <3877989d0701252122s7e5ad92fo5496daf566fd9f97@mail.gmail.com> <45B9C791.8020009@profihost.com> In-Reply-To: <45B9C791.8020009@profihost.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-User-Auth: Auth by hostmaster@profihost.com through 84.134.21.153 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi! Any News? Stefan Stefan Priebe - FH schrieb: > Hi! > > acpi=off does not help i've already tried that. > > > Ok here some outputs: > 1.) complete dmesg with 2.6.16.27 (works) > > Linux version 2.6.16.27amd (root@server275-han) (gcc version 3.3.5 > (Debian 1:3.3.5-13)) #6 SMP Sat Aug 26 14:29:07 CEST 2006 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable) > BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data) > BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS) > BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) > BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) > ACPI: RSDP (v002 ACPIAM ) @ > 0x00000000000fa850 > ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @ > 0x000000003bfb0100 > ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @ > 0x000000003bfb0290 > ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @ > 0x000000003bfb0390 > ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @ > 0x000000003bfb0400 > ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @ > 0x000000003bfbe040 > ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @ > 0x0000000000000000 > Scanning NUMA topology in Northbridge 24 > Number of nodes 1 > Node 0 MemBase 0000000000000000 Limit 000000003bfb0000 > NUMA: Using 63 for the hash shift. > Using node hash shift of 63 > Bootmem setup node 0 0000000000000000-000000003bfb0000 > On node 0 totalpages: 240991 > DMA zone: 2709 pages, LIFO batch:0 > DMA32 zone: 238282 pages, LIFO batch:31 > Normal zone: 0 pages, LIFO batch:0 > HighMem zone: 0 pages, LIFO batch:0 > ACPI: PM-Timer IO Port: 0x808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 15:15 APIC version 16 > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) > ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 > ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24]) > IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Setting APIC routing to flat > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000) > Checking aperture... > CPU 0: aperture @ f0000000 size 128 MB > Built 1 zonelists > Kernel command line: root=/dev/sda6 ro rootflags=quota Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 131072 bytes) > time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. > time.c: Detected 2400.214 MHz processor. > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) > Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) > Memory: 962212k/982720k available (2939k kernel code, 20120k reserved, > 1327k data, 220k init) > Calibrating delay using timer specific routine.. 4810.51 BogoMIPS > (lpj=9621030) > Mount-cache hash table entries: 256 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU 0(1) -> Node 0 -> Core 0 > Using local APIC timer interrupts. > result 12501128 > Detected 12.501 MHz APIC timer. > Brought up 1 CPUs > testing NMI watchdog ... OK. > migration_cost=0 > DMI 2.3 present. > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: Using configuration type 1 > PCI: Using MMCONFIG at e0000000 > ACPI: Subsystem revision 20060127 > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > Boot video device is 0000:01:00.0 > PCI: Transparent bridge - 0000:00:13.1 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: PnP ACPI: found 12 devices > SCSI subsystem initialized > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a > report > PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0 > PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0 > PCI-DMA: Disabling IOMMU. > pnp: 00:06: ioport range 0x290-0x297 has been reserved > PCI: Bridge: 0000:00:01.0 > IO window: disabled. > MEM window: faf00000-fbffffff > PREFETCH window: d0000000-dfffffff > PCI: Bridge: 0000:00:02.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:03.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:13.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:13.1 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Setting latency timer of device 0000:00:01.0 to 64 > GSI 16 sharing vector 0xA9 and IRQ 16 > ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169 > PCI: Setting latency timer of device 0000:00:02.0 to 64 > GSI 17 sharing vector 0xB1 and IRQ 17 > ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177 > PCI: Setting latency timer of device 0000:00:03.0 to 64 > PCI: Setting latency timer of device 0000:00:13.0 to 64 > PCI: Setting latency timer of device 0000:00:13.1 to 64 > IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > SGI XFS with large block/inode numbers, no debug enabled > SGI XFS Quota Management subsystem > io scheduler noop registered > io scheduler anticipatory registered (default) > ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169 > PCI: Setting latency timer of device 0000:00:02.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:02.0:pcie00] > Allocate Port Service[0000:00:02.0:pcie01] > Allocate Port Service[0000:00:02.0:pcie02] > Allocate Port Service[0000:00:02.0:pcie03] > ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177 > PCI: Setting latency timer of device 0000:00:03.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:03.0:pcie00] > Allocate Port Service[0000:00:03.0:pcie01] > Allocate Port Service[0000:00:03.0:pcie02] > Allocate Port Service[0000:00:03.0:pcie03] > ACPI: CPU0 (power states: C1[C1] C2[C2]) > ACPI: Processor [CPU1] (supports 16 throttling states) > Real Time Clock Driver v1.12ac > Linux agpgart interface v0.101 (c) Dave Jones > PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > isa bounce pool size: 16 pages > floppy0: no floppy controllers found > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > loop: loaded (max 8 devices) > nbd: registered device at major 43 > Intel(R) PRO/1000 Network Driver - version 6.3.9-k4 > Copyright (c) 1999-2005 Intel Corporation. > e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI > e100: Copyright(c) 1999-2005 Intel Corporation > via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker > GSI 18 sharing vector 0xD1 and IRQ 18 > ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 209 > eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 209. > eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. > forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49. > netconsole: device eth0 not up yet, forcing it > eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 > netconsole: carrier detect appears untrustworthy, waiting 4 seconds > netconsole: network logging started > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > Probing IDE interface ide0... > Probing IDE interface ide1... > Adaptec aacraid driver (1.1-4 Aug 26 2006 14:27:50) > megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005) > megaraid: 2.20.4.7 (Release Date: Mon Nov 14 12:27:22 EST 2005) > GDT-HA: Storage RAID Controller Driver. Version: 3.04 > GDT-HA: Found 0 PCI Storage RAID Controllers > 3ware Storage Controller device driver for Linux v1.26.02.001. > 3ware 9000 Storage Controller device driver for Linux v2.26.02.007. > libata version 1.20 loaded. > ahci 0000:00:0f.0: version 1.2 > GSI 19 sharing vector 0xD9 and IRQ 19 > ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217 > ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode > ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part > ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 225 > ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 225 > ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 225 > ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 225 > ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:bc01 87:4023 > 88:40ff > ata1: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48 > ata1: dev 0 configured for UDMA/133 > scsi0 : ahci > ata2: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:bc01 87:4023 > 88:40ff > ata2: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48 > ata2: dev 0 configured for UDMA/133 > scsi1 : ahci > ata3: no device found (phy stat 00000000) > scsi2 : ahci > ata4: no device found (phy stat 00000000) > scsi3 : ahci > Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10 > Type: Direct-Access ANSI SCSI revision: 05 > Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10 > Type: Direct-Access ANSI SCSI revision: 05 > SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > sda: sda1 < sda5 sda6 sda7 > > sd 0:0:0:0: Attached scsi disk sda > SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) > sdb: Write Protect is off > sdb: Mode Sense: 00 3a 00 00 > SCSI device sdb: drive cache: write back > SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) > sdb: Write Protect is off > sdb: Mode Sense: 00 3a 00 00 > SCSI device sdb: drive cache: write back > sdb: sdb1 < sdb5 sdb6 sdb7 > > sd 1:0:0:0: Attached scsi disk sdb > Fusion MPT base driver 3.03.07 > Copyright (c) 1999-2005 LSI Logic Corporation > Fusion MPT SPI Host driver 3.03.07 > mice: PS/2 mouse device common for all mice > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 6, 262144 bytes) > TCP established hash table entries: 131072 (order: 9, 2097152 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > TCP bic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.0) > powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6 (1400 mV) > powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8 (1350 mV) > powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa (1300 mV) > powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc (1250 mV) > powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) > cpu_init done, current fid 0x10, vid 0x6 > XFS mounting filesystem sda6 > Ending clean XFS mount for filesystem: sda6 > VFS: Mounted root (xfs filesystem) readonly. > Freeing unused kernel memory: 220k freed > Adding 1349420k swap on /dev/sda7. Priority:-1 extents:1 across:1349420k > > > > 2.) complete dmesg output with 2.6.18.6 (works) > Linux version 2.6.18.3amd (root@neuerserver) (gcc version 3.3.5 (Debian > 1:3.3.5-13)) #2 SMP Wed Dec 20 14:26:51 CET 2006 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable) > BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data) > BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS) > BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) > BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) > DMI 2.3 present. > ACPI: RSDP (v002 ACPIAM ) @ > 0x00000000000fa850 > ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @ > 0x000000003bfb0100 > ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @ > 0x000000003bfb0290 > ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @ > 0x000000003bfb0390 > ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @ > 0x000000003bfb0400 > ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @ > 0x000000003bfbe040 > ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @ > 0x0000000000000000 > On node 0 totalpages: 240803 > DMA zone: 2521 pages, LIFO batch:0 > DMA32 zone: 238282 pages, LIFO batch:31 > ACPI: PM-Timer IO Port: 0x808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 15:15 APIC version 16 > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) > ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 > ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24]) > IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Setting APIC routing to flat > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000) > Built 1 zonelists. Total pages: 240803 > Kernel command line: nfs root=/dev/nfs > nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp > BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64 > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 32768 bytes) > time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. > time.c: Detected 2400.084 MHz processor. > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) > Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) > Checking aperture... > CPU 0: aperture @ f0000000 size 128 MB > Memory: 961352k/982720k available (3487k kernel code, 20768k reserved, > 1452k data, 228k init) > Calibrating delay using timer specific routine.. 4804.44 BogoMIPS > (lpj=9608882) > Mount-cache hash table entries: 256 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > SMP alternatives: switching to UP code > Freeing SMP alternatives: 28k freed > ACPI: Core revision 20060707 > Using local APIC timer interrupts. > result 12500453 > Detected 12.500 MHz APIC timer. > Brought up 1 CPUs > testing NMI watchdog ... OK. > migration_cost=0 > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved > PCI: Not using MMCONFIG. > PCI: Using configuration type 1 > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > Boot video device is 0000:01:00.0 > PCI: Transparent bridge - 0000:00:13.1 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: PnP ACPI: found 12 devices > SCSI subsystem initialized > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a > report > PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0 > PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0 > PCI-DMA: Disabling IOMMU. > pnp: 00:06: ioport range 0x290-0x297 has been reserved > PCI: Bridge: 0000:00:01.0 > IO window: disabled. > MEM window: faf00000-fbffffff > PREFETCH window: d0000000-dfffffff > PCI: Bridge: 0000:00:02.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:03.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:13.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:13.1 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Setting latency timer of device 0000:00:01.0 to 64 > GSI 16 sharing vector 0xA9 and IRQ 16 > ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169 > PCI: Setting latency timer of device 0000:00:02.0 to 64 > GSI 17 sharing vector 0xB1 and IRQ 17 > ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177 > PCI: Setting latency timer of device 0000:00:03.0 to 64 > PCI: Setting latency timer of device 0000:00:13.0 to 64 > PCI: Setting latency timer of device 0000:00:13.1 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 6, 262144 bytes) > TCP established hash table entries: 131072 (order: 9, 2097152 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > SGI XFS with large block/inode numbers, no debug enabled > SGI XFS Quota Management subsystem > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > PCI: Setting latency timer of device 0000:00:02.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:02.0:pcie00] > Allocate Port Service[0000:00:02.0:pcie02] > PCI: Setting latency timer of device 0000:00:03.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:03.0:pcie00] > Allocate Port Service[0000:00:03.0:pcie02] > ACPI: CPU0 (power states: C1[C1] C2[C2]) > ACPI: Processor [CPU1] (supports 16 throttling states) > ACPI: Getting cpuindex for acpiid 0x2 > Real Time Clock Driver v1.12ac > Linux agpgart interface v0.101 (c) Dave Jones > floppy0: no floppy controllers found > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > loop: loaded (max 8 devices) > nbd: registered device at major 43 > Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 > Copyright (c) 1999-2006 Intel Corporation. > e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI > e100: Copyright(c) 1999-2005 Intel Corporation > via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker > GSI 18 sharing vector 0xD1 and IRQ 18 > ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 209 > eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 209. > eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. > forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56. > netconsole: not configured, aborting > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > Probing IDE interface ide0... > Probing IDE interface ide1... > Adaptec aacraid driver (1.1-5[2409]-mh2) > megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) > megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) > GDT-HA: Storage RAID Controller Driver. Version: 3.05 > GDT-HA: Found 0 PCI Storage RAID Controllers > 3ware Storage Controller device driver for Linux v1.26.02.001. > 3ware 9000 Storage Controller device driver for Linux v2.26.02.007. > libata version 2.00 loaded. > ahci 0000:00:0f.0: version 2.0 > GSI 19 sharing vector 0xD9 and IRQ 19 > ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217 > ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode > ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part > ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 225 > ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 225 > ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 225 > ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 225 > scsi0 : ahci > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata1.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32) > ata1.00: ata1: dev 0 multi count 16 > ata1.00: configured for UDMA/133 > scsi1 : ahci > ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > ata2.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32) > ata2.00: ata2: dev 0 multi count 16 > ata2.00: configured for UDMA/133 > scsi2 : ahci > ata3: SATA link down (SStatus 0 SControl 300) > scsi3 : ahci > ata4: SATA link down (SStatus 0 SControl 300) > Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10 > Type: Direct-Access ANSI SCSI revision: 05 > Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10 > Type: Direct-Access ANSI SCSI revision: 05 > SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: drive cache: write back > sda: sda1 < sda5 sda6 sda7 > > sd 0:0:0:0: Attached scsi disk sda > SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) > sdb: Write Protect is off > sdb: Mode Sense: 00 3a 00 00 > SCSI device sdb: drive cache: write back > SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) > sdb: Write Protect is off > sdb: Mode Sense: 00 3a 00 00 > SCSI device sdb: drive cache: write back > sdb: sdb1 < sdb5 sdb6 sdb7 > > sd 1:0:0:0: Attached scsi disk sdb > Fusion MPT base driver 3.04.01 > Copyright (c) 1999-2005 LSI Logic Corporation > Fusion MPT SPI Host driver 3.04.01 > PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > mice: PS/2 mouse device common for all mice > TCP bic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors > (version 2.00.00) > powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6 > powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8 > powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa > powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc > powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 > eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 > > > 3.) complete output (2.6.19.2) (with acpi does not work) > > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable) > BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data) > BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS) > BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) > BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) > Entering add_active_range(0, 0, 159) 0 entries of 256 used > Entering add_active_range(0, 256, 245680) 1 entries of 256 used > end_pfn_map = 1048576 > DMI 2.3 present. > ACPI: RSDP (v002 ACPIAM ) @ > 0x00000000000fa850 > ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @ > 0x000000003bfb0100 > ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @ > 0x000000003bfb0290 > ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @ > 0x000000003bfb0390 > ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @ > 0x000000003bfb0400 > ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @ > 0x000000003bfbe040 > ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @ > 0x0000000000000000 > Entering add_active_range(0, 0, 159) 0 entries of 256 used > Entering add_active_range(0, 256, 245680) 1 entries of 256 used > Zone PFN ranges: > DMA 0 -> 4096 > DMA32 4096 -> 1048576 > Normal 1048576 -> 1048576 > early_node_map[2] active PFN ranges > 0: 0 -> 159 > 0: 256 -> 245680 > On node 0 totalpages: 245583 > DMA zone: 56 pages used for memmap > DMA zone: 1474 pages reserved > DMA zone: 2469 pages, LIFO batch:0 > DMA32 zone: 3302 pages used for memmap > DMA32 zone: 238282 pages, LIFO batch:31 > Normal zone: 0 pages used for memmap > ACPI: PM-Timer IO Port: 0x808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 (Bootup-CPU) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) > ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 > ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24]) > IOAPIC[1]: apic_id 2, address 0xfecc0000, GSI 24-47 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Setting APIC routing to flat > Using ACPI (MADT) for SMP configuration information > Nosave address range: 000000000009f000 - 00000000000a0000 > Nosave address range: 00000000000a0000 - 00000000000e4000 > Nosave address range: 00000000000e4000 - 0000000000100000 > Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000) > PERCPU: Allocating 36352 bytes of per cpu data > Built 1 zonelists. Total pages: 240751 > Kernel command line: nfs root=/dev/nfs > nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp > BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64 > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 32768 bytes) > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) > Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) > Checking aperture... > CPU 0: aperture @ f0000000 size 128 MB > Memory: 961140k/982720k available (3530k kernel code, 20980k reserved, > 1474k data, 264k init) > Calibrating delay using timer specific routine.. 4804.06 BogoMIPS > (lpj=9608139) > Mount-cache hash table entries: 256 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > SMP alternatives: switching to UP code > Freeing SMP alternatives: 32k freed > ACPI: Core revision 20060707 > Using local APIC timer interrupts. > result 12501046 > Detected 12.501 MHz APIC timer. > Brought up 1 CPUs > testing NMI watchdog ... OK. > time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. > time.c: Detected 2400.198 MHz processor. > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved > PCI: Not using MMCONFIG. > PCI: Using configuration type 1 > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > Boot video device is 0000:01:00.0 > PCI: Transparent bridge - 0000:00:13.1 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: PnP ACPI: found 12 devices > SCSI subsystem initialized > libata version 2.00 loaded. > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a > report > PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0 > PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0 > PCI: Cannot allocate resource region 0 of device 0000:00:00.0 > PCI-DMA: Disabling IOMMU. > pnp: 00:06: ioport range 0x290-0x297 has been reserved > PCI: Bridge: 0000:00:01.0 > IO window: disabled. > MEM window: faf00000-fbffffff > PREFETCH window: d0000000-dfffffff > PCI: Bridge: 0000:00:02.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:03.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:13.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:13.1 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Setting latency timer of device 0000:00:01.0 to 64 > ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27 > PCI: Setting latency timer of device 0000:00:02.0 to 64 > ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31 > PCI: Setting latency timer of device 0000:00:03.0 to 64 > PCI: Setting latency timer of device 0000:00:13.0 to 64 > PCI: Setting latency timer of device 0000:00:13.1 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 6, 262144 bytes) > TCP established hash table entries: 131072 (order: 9, 2097152 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > SGI XFS with large block/inode numbers, no debug enabled > SGI XFS Quota Management subsystem > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > PCI: Setting latency timer of device 0000:00:02.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:02.0:pcie00] > Allocate Port Service[0000:00:02.0:pcie02] > PCI: Setting latency timer of device 0000:00:03.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:03.0:pcie00] > Allocate Port Service[0000:00:03.0:pcie02] > ACPI: CPU0 (power states: C1[C1] C2[C2]) > ACPI: Processor [CPU1] (supports 16 throttling states) > ACPI: Getting cpuindex for acpiid 0x2 > Real Time Clock Driver v1.12ac > Linux agpgart interface v0.101 (c) Dave Jones > floppy0: no floppy controllers found > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > loop: loaded (max 8 devices) > nbd: registered device at major 43 > Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 > Copyright (c) 1999-2006 Intel Corporation. > e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI > e100: Copyright(c) 1999-2006 Intel Corporation > via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker > ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23 > eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 23. > eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. > forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57. > netconsole: not configured, aborting > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > Probing IDE interface ide0... > Probing IDE interface ide1... > Adaptec aacraid driver (1.1-5[2409]-mh2) > megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) > megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) > GDT-HA: Storage RAID Controller Driver. Version: 3.05 > GDT-HA: Found 0 PCI Storage RAID Controllers > 3ware Storage Controller device driver for Linux v1.26.02.001. > 3ware 9000 Storage Controller device driver for Linux v2.26.02.008. > ahci 0000:00:0f.0: version 2.0 > ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21 > ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode > ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part > ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 1277 > ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 1277 > ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 1277 > ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 1277 > scsi0 : ahci > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > APIC error on CPU0: 04(08) > ata1.00: qc timeout (cmd 0xec) > ata1.00: failed to IDENTIFY (I/O error, err_mask=0x104) > ata1: port is slow to respond, please be patient (Status 0x80) > ata1: port failed to respond (30 secs, Status 0x80) > ata1: COMRESET failed (device not ready) > ata1: hardreset failed, retrying in 5 secs > ata1: port is slow to respond, please be patient (Status 0x80) > ata1: port failed to respond (30 secs, Status 0x80) > ata1: COMRESET failed (device not ready) > ata1: hardreset failed, retrying in 5 secs > ata1: port is slow to respond, please be patient (Status 0x80) > ata1: port failed to respond (30 secs, Status 0x80) > ata1: COMRESET failed (device not ready) > ata1: reset failed, giving up > scsi1 : ahci > ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > APIC error on CPU0: 08(08) > ata2.00: qc timeout (cmd 0xec) > ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104) > ata2: port is slow to respond, please be patient (Status 0x80) > ata2: port failed to respond (30 secs, Status 0x80) > ata2: COMRESET failed (device not ready) > ata2: hardreset failed, retrying in 5 secs > ata2: port is slow to respond, please be patient (Status 0x80) > ata2: port failed to respond (30 secs, Status 0x80) > ata2: COMRESET failed (device not ready) > ata2: hardreset failed, retrying in 5 secs > ata2: port is slow to respond, please be patient (Status 0x80) > ata2: port failed to respond (30 secs, Status 0x80) > ata2: COMRESET failed (device not ready) > ata2: reset failed, giving up > scsi2 : ahci > ata3: SATA link down (SStatus 0 SControl 300) > scsi3 : ahci > ata4: SATA link down (SStatus 0 SControl 300) > Fusion MPT base driver 3.04.02 > Copyright (c) 1999-2005 LSI Logic Corporation > Fusion MPT SPI Host driver 3.04.02 > PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > TCP cubic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors > (version 2.00.00) > powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6 > powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8 > powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa > powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc > powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 > eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 > Sending DHCP requests ., OK > IP-Config: Got DHCP answer from 85.158.176.245, my address is > 85.158.176.246 > IP-Config: Complete: > device=eth0, addr=85.158.176.246, mask=255.255.255.0, > gw=85.158.176.1, > host=85.158.176.246, domain=, nis-domain=(none), > bootserver=85.158.176.245, rootserver=85.158.176.245, rootpath= > Looking up port of RPC 100003/2 on 85.158.176.245 > Looking up port of RPC 100005/1 on 85.158.176.245 > VFS: Mounted root (nfs filesystem) readonly. > Freeing unused kernel memory: 264k freed > > > > 4.) complete output (2.6.19.2) (acpi=off does not work) > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable) > BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data) > BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS) > BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) > BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) > Entering add_active_range(0, 0, 159) 0 entries of 256 used > Entering add_active_range(0, 256, 245680) 1 entries of 256 used > end_pfn_map = 1048576 > DMI 2.3 present. > Entering add_active_range(0, 0, 159) 0 entries of 256 used > Entering add_active_range(0, 256, 245680) 1 entries of 256 used > Zone PFN ranges: > DMA 0 -> 4096 > DMA32 4096 -> 1048576 > Normal 1048576 -> 1048576 > early_node_map[2] active PFN ranges > 0: 0 -> 159 > 0: 256 -> 245680 > On node 0 totalpages: 245583 > DMA zone: 56 pages used for memmap > DMA zone: 1474 pages reserved > DMA zone: 2469 pages, LIFO batch:0 > DMA32 zone: 3302 pages used for memmap > DMA32 zone: 238282 pages, LIFO batch:31 > Normal zone: 0 pages used for memmap > Intel MultiProcessor Specification v1.1 > MPTABLE: OEM ID: TEMPLATE MPTABLE: Product ID: MPTABLE: APIC at: > 0xFEE00000 > Processor #0 (Bootup-CPU) > I/O APIC #1 at 0xFEC00000. > I/O APIC #2 at 0xFECC0000. > Setting APIC routing to flat > Processors: 1 > Nosave address range: 000000000009f000 - 00000000000a0000 > Nosave address range: 00000000000a0000 - 00000000000e4000 > Nosave address range: 00000000000e4000 - 0000000000100000 > Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000) > PERCPU: Allocating 36352 bytes of per cpu data > Built 1 zonelists. Total pages: 240751 > Kernel command line: nfs root=/dev/nfs > nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp acpi=off > BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64 > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 32768 bytes) > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) > Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) > Checking aperture... > CPU 0: aperture @ f0000000 size 128 MB > Memory: 961140k/982720k available (3530k kernel code, 20980k reserved, > 1474k data, 264k init) > Calibrating delay using timer specific routine.. 4818.82 BogoMIPS > (lpj=9637645) > Mount-cache hash table entries: 256 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > SMP alternatives: switching to UP code > Freeing SMP alternatives: 32k freed > Using local APIC timer interrupts. > result 12500751 > Detected 12.500 MHz APIC timer. > Brought up 1 CPUs > testing NMI watchdog ... OK. > time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer. > time.c: Detected 2400.142 MHz processor. > NET: Registered protocol family 16 > PCI: Using configuration type 1 > ACPI: Interpreter disabled. > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI: disabled > SCSI subsystem initialized > libata version 2.00 loaded. > PCI: Probing PCI hardware > PCI: Probing PCI hardware (bus 00) > Boot video device is 0000:01:00.0 > PCI: Transparent bridge - 0000:00:13.1 > PCI: Using IRQ router default [1106/3287] at 0000:00:11.0 > PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 27 > PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 31 > PCI->APIC IRQ transform: 0000:00:0f.0[B] -> IRQ 21 > PCI->APIC IRQ transform: 0000:00:10.0[A] -> IRQ 20 > PCI->APIC IRQ transform: 0000:00:10.1[C] -> IRQ 22 > PCI->APIC IRQ transform: 0000:00:10.2[B] -> IRQ 21 > PCI->APIC IRQ transform: 0000:00:10.3[D] -> IRQ 23 > PCI->APIC IRQ transform: 0000:00:12.0[A] -> IRQ 23 > PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16 > PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0 > PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0 > PCI: Cannot allocate resource region 0 of device 0000:00:00.0 > PCI-DMA: Disabling IOMMU. > PCI: Bridge: 0000:00:01.0 > IO window: disabled. > MEM window: faf00000-fbffffff > PREFETCH window: d0000000-dfffffff > PCI: Bridge: 0000:00:02.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:03.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:13.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:13.1 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Setting latency timer of device 0000:00:01.0 to 64 > PCI: Setting latency timer of device 0000:00:02.0 to 64 > PCI: Setting latency timer of device 0000:00:03.0 to 64 > PCI: Setting latency timer of device 0000:00:13.0 to 64 > PCI: Setting latency timer of device 0000:00:13.1 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 6, 262144 bytes) > TCP established hash table entries: 131072 (order: 9, 2097152 bytes) > TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 512 (order 0, 4096 bytes) > Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > SGI XFS with large block/inode numbers, no debug enabled > SGI XFS Quota Management subsystem > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > PCI: Setting latency timer of device 0000:00:02.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:02.0:pcie00] > Allocate Port Service[0000:00:02.0:pcie02] > PCI: Setting latency timer of device 0000:00:03.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:03.0:pcie00] > Allocate Port Service[0000:00:03.0:pcie02] > Real Time Clock Driver v1.12ac > Linux agpgart interface v0.101 (c) Dave Jones > floppy0: no floppy controllers found > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > loop: loaded (max 8 devices) > nbd: registered device at major 43 > Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 > Copyright (c) 1999-2006 Intel Corporation. > e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI > e100: Copyright(c) 1999-2006 Intel Corporation > via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker > eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 23. > eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1. > forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57. > netconsole: not configured, aborting > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > Probing IDE interface ide0... > Probing IDE interface ide1... > Adaptec aacraid driver (1.1-5[2409]-mh2) > megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) > megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) > GDT-HA: Storage RAID Controller Driver. Version: 3.05 > GDT-HA: Found 0 PCI Storage RAID Controllers > 3ware Storage Controller device driver for Linux v1.26.02.001. > 3ware 9000 Storage Controller device driver for Linux v2.26.02.008. > ahci 0000:00:0f.0: version 2.0 > ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode > ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part > ata1: SATA max UDMA/133 cmd 0xFFFFC20000000D00 ctl 0x0 bmdma 0x0 irq 1277 > ata2: SATA max UDMA/133 cmd 0xFFFFC20000000D80 ctl 0x0 bmdma 0x0 irq 1277 > ata3: SATA max UDMA/133 cmd 0xFFFFC20000000E00 ctl 0x0 bmdma 0x0 irq 1277 > ata4: SATA max UDMA/133 cmd 0xFFFFC20000000E80 ctl 0x0 bmdma 0x0 irq 1277 > scsi0 : ahci > ata1: SATA link down (SStatus 601 SControl 300) > scsi1 : ahci > ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) > APIC error on CPU0: 04(08) > ata2.00: qc timeout (cmd 0xec) > ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104) > ata2: port is slow to respond, please be patient (Status 0x80) > ata2: port failed to respond (30 secs, Status 0x80) > ata2: COMRESET failed (device not ready) > ata2: hardreset failed, retrying in 5 secs > ata2: port is slow to respond, please be patient (Status 0x80) > ata2: port failed to respond (30 secs, Status 0x80) > ata2: COMRESET failed (device not ready) > ata2: hardreset failed, retrying in 5 secs > ata2: port is slow to respond, please be patient (Status 0x80) > ata2: port failed to respond (30 secs, Status 0x80) > ata2: COMRESET failed (device not ready) > ata2: reset failed, giving up > scsi2 : ahci > ata3: SATA link down (SStatus 0 SControl 300) > scsi3 : ahci > ata4: SATA link down (SStatus 0 SControl 300) > Fusion MPT base driver 3.04.02 > Copyright (c) 1999-2005 LSI Logic Corporation > Fusion MPT SPI Host driver 3.04.02 > PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > TCP cubic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors > (version 2.00.00) > powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12 > powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc > powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa > powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x8 > powernow-k8: 4 : fid 0x10 (2400 MHz), vid 0x6 > eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 > Sending DHCP requests ., OK > IP-Config: Got DHCP answer from 85.158.176.245, my address is > 85.158.176.246 > IP-Config: Complete: > device=eth0, addr=85.158.176.246, mask=255.255.255.0, > gw=85.158.176.1, > host=85.158.176.246, domain=, nis-domain=(none), > bootserver=85.158.176.245, rootserver=85.158.176.245, rootpath= > Looking up port of RPC 100003/2 on 85.158.176.245 > Looking up port of RPC 100005/1 on 85.158.176.245 > VFS: Mounted root (nfs filesystem) readonly. > Freeing unused kernel memory: 264k freed > > > Stefan > > Luming Yu schrieb: >> On 1/26/07, Stephen Evanchik wrote: >>> On 1/25/07, Luming Yu wrote: >>> > From the log: >>> > 2.6.18.3: >>> > ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217 >>> > 2.6.20-rc5: >>> > "ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21" >>> > >>> > Sounds like acpi interrupt configure problem. Please try acpi=off >>> first. >>> >>> >>> Still does not recognize the SATA device (and the machine fails to >>> come up). I tested this with 2.6.19.2, 2.6.20-rc5 and -rc6 this >>> evening. I am going to build a vanilla 2.6.18 and see if that still >>> works as I am currently running an FC5 kernel. >>> >> Is there any difference in dmesg with acpi=off? >> what is your sata driver? > >