From mboxrd@z Thu Jan 1 00:00:00 1970 From: jharvell@dogpad.net (Joe Harvell) Date: Tue, 06 Feb 2007 03:54:44 +0000 Subject: [lm-sensors] Asus P5B Deluxe / Winbond 83627DHG Message-Id: <45C7FC04.4050607@dogpad.net> List-Id: References: <4dfa50520612211313g7906f3b0kbf8d7aebb2ddcda9@mail.gmail.com> In-Reply-To: <4dfa50520612211313g7906f3b0kbf8d7aebb2ddcda9@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Joe Harvell wrote: > Rudolf Marek wrote: > >>> temp2): Under load, my temp3 *drops* from 119 to 103.5 under load and >>> then goes back up afterwards ????? >>> >>> >> Hmm my MB has this at 127C which means unconnected. Please can you send a >> dsdt.bin file? (cat /proc/acpi/dsdt > /tmp/dsdt.bin) >> >> > This machine is powered down right now. I'll send this shortly. > Sent. > > I'll get that shortly also. Just wanted to let you know that I see some > strange behavior of lm_sensors with respect to the fan5. This sensor > usually reports zero. But after it has been up for a while it starts > reporting something in the 1100 to 1200 range. This is consistent with > my case fan speed. So it seems fan5 is either CHA_FAN1 or CHA_FAN2. > Actually, I can't confirm it's the fan5 sensor that's doing this. That > is what I remember from a couple of days ago. But I updated my > sensors.conf file to put a label on the sensor that was doing this, so > once I power up my machine again, I'll verify this as well. > Confirmed, fan5 is the sensors showing false zero readings most of the time and valid readings for CHA_FAN1 or CHA_FAN2 sometimes. I need to hook up a console again to get the BIOS fans. >> here is my: >> >> axon:~# sensors >> w83627dhg-isa-0290 >> Adapter: ISA adapter >> VCore: +1.14 V (min = +0.00 V, max = +1.74 V) >> in1: +12.30 V (min = +0.26 V, max = +10.88 V) ALARM >> AVCC: +3.25 V (min = +1.74 V, max = +2.24 V) ALARM >> 3VCC: +3.25 V (min = +3.44 V, max = +3.17 V) ALARM >> in4: +1.11 V (min = +1.17 V, max = +0.26 V) ALARM >> in5: +1.59 V (min = +0.06 V, max = +1.54 V) ALARM >> in6: +3.53 V (min = +0.51 V, max = +1.00 V) ALARM >> VSB: +3.25 V (min = +1.74 V, max = +3.66 V) >> VBAT: +3.25 V (min = +0.05 V, max = +0.64 V) ALARM >> Case Fan: 0 RPM (min = 21093 RPM, div = 64) ALARM >> CPU Fan: 1687 RPM (min = 1662 RPM, div = 4) >> Aux Fan: 0 RPM (min = 10546 RPM, div = 64) ALARM >> fan4: 0 RPM (min = 10546 RPM, div = 32) ALARM >> fan5: 3835 RPM (min = 7670 RPM, div = 2) ALARM >> Sys Temp: +33?C (high = -56?C, hyst = +39?C) >> CPU Temp: +39.5?C (high = +80.0?C, hyst = +75.0?C) >> AUX Temp: +127.0?C (high = +80.0?C, hyst = +75.0?C) ALARM >> >> coretemp-isa-0000 >> Adapter: ISA adapter >> temp1: +30?C (high = +85?C) >> >> coretemp-isa-0001 >> Adapter: ISA adapter >> temp1: +32?C (high = +85?C) >> >> Rudolf >> >> > I forget, is your board a P5B Deluxe WiFi? > > _______________________________________________ > lm-sensors mailing list > lm-sensors at lm-sensors.org > http://lists.lm-sensors.org/mailman/listinfo/lm-sensors