From mboxrd@z Thu Jan 1 00:00:00 1970 From: Timur Tabi Date: Fri, 09 Feb 2007 14:59:53 -0600 Subject: [U-Boot-Users] MPC8360 Rev 2 patch? In-Reply-To: <20070209145730.3af997f4.kim.phillips@freescale.com> References: <45C7BA89.8050602@sgi.com> <20070205172034.68846c61.kim.phillips@freescale.com> <45CB4F99.6030107@sgi.com> <20070208105947.7a7655f0.kim.phillips@freescale.com> <45CBA94A.3050404@sgi.com> <20070209145730.3af997f4.kim.phillips@freescale.com> Message-ID: <45CCE0C9.60404@freescale.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Kim Phillips wrote: >> One question about the 8360 version. When I compile it straight up >> for the MPC8360EMDS_HOST_66 configuration, I never see any output >> at the startup of U-boot. But if I comment out the open firmware >> defines in the include/configs/MPC8360EMDS.h config file, then all works. >> Why doesn't this work for me straight up on the board it was compiled for? >> (This has been true for all U-boot versions I've tried for the 8360). >> > that's odd - MPC8360EMDS_HOST_66 works fine here and there's nothing obvious I can see in the code that would warrant that sort of behaviour. Can you provide details? I think the problem is in his device tree. Either it's missing or incorrect. -- Timur Tabi Linux Kernel Developer @ Freescale