* Re: SATA ahci Bug in 2.6.19.x
[not found] ` <7IYJ1-281-27@gated-at.bofh.it>
@ 2007-02-14 8:57 ` Manuel Metz
2007-02-21 11:55 ` Tejun Heo
0 siblings, 1 reply; 16+ messages in thread
From: Manuel Metz @ 2007-02-14 8:57 UTC (permalink / raw)
To: linux-kernel
Stefan Priebe - FH wrote:
> Hi!
>
> Any News?
>
> Stefan
>
> Stefan Priebe - FH schrieb:
>> Hi!
>>
>> acpi=off does not help i've already tried that.
>>
>>
>> Ok here some outputs:
>> 1.) complete dmesg with 2.6.16.27 (works)
>>
>> Linux version 2.6.16.27amd (root@server275-han) (gcc version 3.3.5
>> (Debian 1:3.3.5-13)) #6 SMP Sat Aug 26 14:29:07 CEST 2006
>> BIOS-provided physical RAM map:
>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
>> BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
>> BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
>> BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
>> BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
>> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>> BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
>> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
>> ACPI: RSDP (v002 ACPIAM ) @
>> 0x00000000000fa850
>> ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0100
>> ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0290
>> ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0390
>> ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0400
>> ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfbe040
>> ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @
>> 0x0000000000000000
>> Scanning NUMA topology in Northbridge 24
>> Number of nodes 1
>> Node 0 MemBase 0000000000000000 Limit 000000003bfb0000
>> NUMA: Using 63 for the hash shift.
>> Using node hash shift of 63
>> Bootmem setup node 0 0000000000000000-000000003bfb0000
>> On node 0 totalpages: 240991
>> DMA zone: 2709 pages, LIFO batch:0
>> DMA32 zone: 238282 pages, LIFO batch:31
>> Normal zone: 0 pages, LIFO batch:0
>> HighMem zone: 0 pages, LIFO batch:0
>> ACPI: PM-Timer IO Port: 0x808
>> ACPI: Local APIC address 0xfee00000
>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>> Processor #0 15:15 APIC version 16
>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>> IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
>> ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
>> IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>> ACPI: IRQ0 used by override.
>> ACPI: IRQ2 used by override.
>> ACPI: IRQ9 used by override.
>> Setting APIC routing to flat
>> Using ACPI (MADT) for SMP configuration information
>> Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
>> Checking aperture...
>> CPU 0: aperture @ f0000000 size 128 MB
>> Built 1 zonelists
>> Kernel command line: root=/dev/sda6 ro rootflags=quota Initializing CPU#0
>> PID hash table entries: 4096 (order: 12, 131072 bytes)
>> time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>> time.c: Detected 2400.214 MHz processor.
>> Console: colour VGA+ 80x25
>> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>> Memory: 962212k/982720k available (2939k kernel code, 20120k reserved,
>> 1327k data, 220k init)
>> Calibrating delay using timer specific routine.. 4810.51 BogoMIPS
>> (lpj=9621030)
>> Mount-cache hash table entries: 256
>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>> CPU: L2 Cache: 512K (64 bytes/line)
>> CPU 0(1) -> Node 0 -> Core 0
>> Using local APIC timer interrupts.
>> result 12501128
>> Detected 12.501 MHz APIC timer.
>> Brought up 1 CPUs
>> testing NMI watchdog ... OK.
>> migration_cost=0
>> DMI 2.3 present.
>> NET: Registered protocol family 16
>> ACPI: bus type pci registered
>> PCI: Using configuration type 1
>> PCI: Using MMCONFIG at e0000000
>> ACPI: Subsystem revision 20060127
>> ACPI: Interpreter enabled
>> ACPI: Using IOAPIC for interrupt routing
>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>> PCI: Probing PCI hardware (bus 00)
>> Boot video device is 0000:01:00.0
>> PCI: Transparent bridge - 0000:00:13.1
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>> Linux Plug and Play Support v0.97 (c) Adam Belay
>> pnp: PnP ACPI init
>> pnp: PnP ACPI: found 12 devices
>> SCSI subsystem initialized
>> PCI: Using ACPI for IRQ routing
>> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post
>> a report
>> PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0
>> PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
>> PCI-DMA: Disabling IOMMU.
>> pnp: 00:06: ioport range 0x290-0x297 has been reserved
>> PCI: Bridge: 0000:00:01.0
>> IO window: disabled.
>> MEM window: faf00000-fbffffff
>> PREFETCH window: d0000000-dfffffff
>> PCI: Bridge: 0000:00:02.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:03.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:13.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:13.1
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Setting latency timer of device 0000:00:01.0 to 64
>> GSI 16 sharing vector 0xA9 and IRQ 16
>> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
>> PCI: Setting latency timer of device 0000:00:02.0 to 64
>> GSI 17 sharing vector 0xB1 and IRQ 17
>> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
>> PCI: Setting latency timer of device 0000:00:03.0 to 64
>> PCI: Setting latency timer of device 0000:00:13.0 to 64
>> PCI: Setting latency timer of device 0000:00:13.1 to 64
>> IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>> VFS: Disk quotas dquot_6.5.1
>> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>> SGI XFS with large block/inode numbers, no debug enabled
>> SGI XFS Quota Management subsystem
>> io scheduler noop registered
>> io scheduler anticipatory registered (default)
>> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
>> PCI: Setting latency timer of device 0000:00:02.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:02.0:pcie00]
>> Allocate Port Service[0000:00:02.0:pcie01]
>> Allocate Port Service[0000:00:02.0:pcie02]
>> Allocate Port Service[0000:00:02.0:pcie03]
>> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
>> PCI: Setting latency timer of device 0000:00:03.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:03.0:pcie00]
>> Allocate Port Service[0000:00:03.0:pcie01]
>> Allocate Port Service[0000:00:03.0:pcie02]
>> Allocate Port Service[0000:00:03.0:pcie03]
>> ACPI: CPU0 (power states: C1[C1] C2[C2])
>> ACPI: Processor [CPU1] (supports 16 throttling states)
>> Real Time Clock Driver v1.12ac
>> Linux agpgart interface v0.101 (c) Dave Jones
>> PNP: No PS/2 controller found. Probing ports directly.
>> serio: i8042 AUX port at 0x60,0x64 irq 12
>> serio: i8042 KBD port at 0x60,0x64 irq 1
>> isa bounce pool size: 16 pages
>> floppy0: no floppy controllers found
>> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>> loop: loaded (max 8 devices)
>> nbd: registered device at major 43
>> Intel(R) PRO/1000 Network Driver - version 6.3.9-k4
>> Copyright (c) 1999-2005 Intel Corporation.
>> e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
>> e100: Copyright(c) 1999-2005 Intel Corporation
>> via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
>> GSI 18 sharing vector 0xD1 and IRQ 18
>> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 209
>> eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 209.
>> eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link
>> 45e1.
>> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49.
>> netconsole: device eth0 not up yet, forcing it
>> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>> netconsole: carrier detect appears untrustworthy, waiting 4 seconds
>> netconsole: network logging started
>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>> idebus=xx
>> Probing IDE interface ide0...
>> Probing IDE interface ide1...
>> Adaptec aacraid driver (1.1-4 Aug 26 2006 14:27:50)
>> megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
>> megaraid: 2.20.4.7 (Release Date: Mon Nov 14 12:27:22 EST 2005)
>> GDT-HA: Storage RAID Controller Driver. Version: 3.04
>> GDT-HA: Found 0 PCI Storage RAID Controllers
>> 3ware Storage Controller device driver for Linux v1.26.02.001.
>> 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
>> libata version 1.20 loaded.
>> ahci 0000:00:0f.0: version 1.2
>> GSI 19 sharing vector 0xD9 and IRQ 19
>> ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217
>> ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE
>> mode
>> ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
>> ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 225
>> ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 225
>> ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 225
>> ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 225
>> ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:bc01
>> 87:4023 88:40ff
>> ata1: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48
>> ata1: dev 0 configured for UDMA/133
>> scsi0 : ahci
>> ata2: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:bc01
>> 87:4023 88:40ff
>> ata2: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48
>> ata2: dev 0 configured for UDMA/133
>> scsi1 : ahci
>> ata3: no device found (phy stat 00000000)
>> scsi2 : ahci
>> ata4: no device found (phy stat 00000000)
>> scsi3 : ahci
>> Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
>> Type: Direct-Access ANSI SCSI revision: 05
>> Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
>> Type: Direct-Access ANSI SCSI revision: 05
>> SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>> sda: Write Protect is off
>> sda: Mode Sense: 00 3a 00 00
>> SCSI device sda: drive cache: write back
>> SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>> sda: Write Protect is off
>> sda: Mode Sense: 00 3a 00 00
>> SCSI device sda: drive cache: write back
>> sda: sda1 < sda5 sda6 sda7 >
>> sd 0:0:0:0: Attached scsi disk sda
>> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>> sdb: Write Protect is off
>> sdb: Mode Sense: 00 3a 00 00
>> SCSI device sdb: drive cache: write back
>> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>> sdb: Write Protect is off
>> sdb: Mode Sense: 00 3a 00 00
>> SCSI device sdb: drive cache: write back
>> sdb: sdb1 < sdb5 sdb6 sdb7 >
>> sd 1:0:0:0: Attached scsi disk sdb
>> Fusion MPT base driver 3.03.07
>> Copyright (c) 1999-2005 LSI Logic Corporation
>> Fusion MPT SPI Host driver 3.03.07
>> mice: PS/2 mouse device common for all mice
>> NET: Registered protocol family 2
>> IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>> TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>> TCP: Hash tables configured (established 131072 bind 65536)
>> TCP reno registered
>> TCP bic registered
>> NET: Registered protocol family 1
>> NET: Registered protocol family 17
>> powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.0)
>> powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6 (1400 mV)
>> powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8 (1350 mV)
>> powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa (1300 mV)
>> powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc (1250 mV)
>> powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
>> cpu_init done, current fid 0x10, vid 0x6
>> XFS mounting filesystem sda6
>> Ending clean XFS mount for filesystem: sda6
>> VFS: Mounted root (xfs filesystem) readonly.
>> Freeing unused kernel memory: 220k freed
>> Adding 1349420k swap on /dev/sda7. Priority:-1 extents:1 across:1349420k
>>
>>
>>
>> 2.) complete dmesg output with 2.6.18.6 (works)
>> Linux version 2.6.18.3amd (root@neuerserver) (gcc version 3.3.5
>> (Debian 1:3.3.5-13)) #2 SMP Wed Dec 20 14:26:51 CET 2006
>> BIOS-provided physical RAM map:
>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
>> BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
>> BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
>> BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
>> BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
>> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>> BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
>> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
>> DMI 2.3 present.
>> ACPI: RSDP (v002 ACPIAM ) @
>> 0x00000000000fa850
>> ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0100
>> ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0290
>> ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0390
>> ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0400
>> ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfbe040
>> ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @
>> 0x0000000000000000
>> On node 0 totalpages: 240803
>> DMA zone: 2521 pages, LIFO batch:0
>> DMA32 zone: 238282 pages, LIFO batch:31
>> ACPI: PM-Timer IO Port: 0x808
>> ACPI: Local APIC address 0xfee00000
>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>> Processor #0 15:15 APIC version 16
>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>> IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
>> ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
>> IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>> ACPI: IRQ0 used by override.
>> ACPI: IRQ2 used by override.
>> ACPI: IRQ9 used by override.
>> Setting APIC routing to flat
>> Using ACPI (MADT) for SMP configuration information
>> Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
>> Built 1 zonelists. Total pages: 240803
>> Kernel command line: nfs root=/dev/nfs
>> nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp
>> BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64
>> Initializing CPU#0
>> PID hash table entries: 4096 (order: 12, 32768 bytes)
>> time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>> time.c: Detected 2400.084 MHz processor.
>> Console: colour VGA+ 80x25
>> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>> Checking aperture...
>> CPU 0: aperture @ f0000000 size 128 MB
>> Memory: 961352k/982720k available (3487k kernel code, 20768k reserved,
>> 1452k data, 228k init)
>> Calibrating delay using timer specific routine.. 4804.44 BogoMIPS
>> (lpj=9608882)
>> Mount-cache hash table entries: 256
>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>> CPU: L2 Cache: 512K (64 bytes/line)
>> SMP alternatives: switching to UP code
>> Freeing SMP alternatives: 28k freed
>> ACPI: Core revision 20060707
>> Using local APIC timer interrupts.
>> result 12500453
>> Detected 12.500 MHz APIC timer.
>> Brought up 1 CPUs
>> testing NMI watchdog ... OK.
>> migration_cost=0
>> NET: Registered protocol family 16
>> ACPI: bus type pci registered
>> PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>> PCI: Not using MMCONFIG.
>> PCI: Using configuration type 1
>> ACPI: Interpreter enabled
>> ACPI: Using IOAPIC for interrupt routing
>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>> PCI: Probing PCI hardware (bus 00)
>> Boot video device is 0000:01:00.0
>> PCI: Transparent bridge - 0000:00:13.1
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>> Linux Plug and Play Support v0.97 (c) Adam Belay
>> pnp: PnP ACPI init
>> pnp: PnP ACPI: found 12 devices
>> SCSI subsystem initialized
>> PCI: Using ACPI for IRQ routing
>> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post
>> a report
>> PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0
>> PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
>> PCI-DMA: Disabling IOMMU.
>> pnp: 00:06: ioport range 0x290-0x297 has been reserved
>> PCI: Bridge: 0000:00:01.0
>> IO window: disabled.
>> MEM window: faf00000-fbffffff
>> PREFETCH window: d0000000-dfffffff
>> PCI: Bridge: 0000:00:02.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:03.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:13.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:13.1
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Setting latency timer of device 0000:00:01.0 to 64
>> GSI 16 sharing vector 0xA9 and IRQ 16
>> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
>> PCI: Setting latency timer of device 0000:00:02.0 to 64
>> GSI 17 sharing vector 0xB1 and IRQ 17
>> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
>> PCI: Setting latency timer of device 0000:00:03.0 to 64
>> PCI: Setting latency timer of device 0000:00:13.0 to 64
>> PCI: Setting latency timer of device 0000:00:13.1 to 64
>> NET: Registered protocol family 2
>> IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>> TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>> TCP: Hash tables configured (established 131072 bind 65536)
>> TCP reno registered
>> VFS: Disk quotas dquot_6.5.1
>> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>> SGI XFS with large block/inode numbers, no debug enabled
>> SGI XFS Quota Management subsystem
>> io scheduler noop registered
>> io scheduler anticipatory registered
>> io scheduler deadline registered
>> io scheduler cfq registered (default)
>> PCI: Setting latency timer of device 0000:00:02.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:02.0:pcie00]
>> Allocate Port Service[0000:00:02.0:pcie02]
>> PCI: Setting latency timer of device 0000:00:03.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:03.0:pcie00]
>> Allocate Port Service[0000:00:03.0:pcie02]
>> ACPI: CPU0 (power states: C1[C1] C2[C2])
>> ACPI: Processor [CPU1] (supports 16 throttling states)
>> ACPI: Getting cpuindex for acpiid 0x2
>> Real Time Clock Driver v1.12ac
>> Linux agpgart interface v0.101 (c) Dave Jones
>> floppy0: no floppy controllers found
>> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>> loop: loaded (max 8 devices)
>> nbd: registered device at major 43
>> Intel(R) PRO/1000 Network Driver - version 7.1.9-k4
>> Copyright (c) 1999-2006 Intel Corporation.
>> e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
>> e100: Copyright(c) 1999-2005 Intel Corporation
>> via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
>> GSI 18 sharing vector 0xD1 and IRQ 18
>> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 209
>> eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 209.
>> eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link
>> 45e1.
>> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
>> netconsole: not configured, aborting
>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>> idebus=xx
>> Probing IDE interface ide0...
>> Probing IDE interface ide1...
>> Adaptec aacraid driver (1.1-5[2409]-mh2)
>> megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
>> megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
>> GDT-HA: Storage RAID Controller Driver. Version: 3.05
>> GDT-HA: Found 0 PCI Storage RAID Controllers
>> 3ware Storage Controller device driver for Linux v1.26.02.001.
>> 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
>> libata version 2.00 loaded.
>> ahci 0000:00:0f.0: version 2.0
>> GSI 19 sharing vector 0xD9 and IRQ 19
>> ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217
>> ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE
>> mode
>> ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
>> ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 225
>> ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 225
>> ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 225
>> ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 225
>> scsi0 : ahci
>> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> ata1.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32)
>> ata1.00: ata1: dev 0 multi count 16
>> ata1.00: configured for UDMA/133
>> scsi1 : ahci
>> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> ata2.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32)
>> ata2.00: ata2: dev 0 multi count 16
>> ata2.00: configured for UDMA/133
>> scsi2 : ahci
>> ata3: SATA link down (SStatus 0 SControl 300)
>> scsi3 : ahci
>> ata4: SATA link down (SStatus 0 SControl 300)
>> Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
>> Type: Direct-Access ANSI SCSI revision: 05
>> Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
>> Type: Direct-Access ANSI SCSI revision: 05
>> SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>> sda: Write Protect is off
>> sda: Mode Sense: 00 3a 00 00
>> SCSI device sda: drive cache: write back
>> SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>> sda: Write Protect is off
>> sda: Mode Sense: 00 3a 00 00
>> SCSI device sda: drive cache: write back
>> sda: sda1 < sda5 sda6 sda7 >
>> sd 0:0:0:0: Attached scsi disk sda
>> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>> sdb: Write Protect is off
>> sdb: Mode Sense: 00 3a 00 00
>> SCSI device sdb: drive cache: write back
>> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>> sdb: Write Protect is off
>> sdb: Mode Sense: 00 3a 00 00
>> SCSI device sdb: drive cache: write back
>> sdb: sdb1 < sdb5 sdb6 sdb7 >
>> sd 1:0:0:0: Attached scsi disk sdb
>> Fusion MPT base driver 3.04.01
>> Copyright (c) 1999-2005 LSI Logic Corporation
>> Fusion MPT SPI Host driver 3.04.01
>> PNP: No PS/2 controller found. Probing ports directly.
>> serio: i8042 AUX port at 0x60,0x64 irq 12
>> serio: i8042 KBD port at 0x60,0x64 irq 1
>> mice: PS/2 mouse device common for all mice
>> TCP bic registered
>> NET: Registered protocol family 1
>> NET: Registered protocol family 17
>> powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors
>> (version 2.00.00)
>> powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6
>> powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8
>> powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa
>> powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc
>> powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
>> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>>
>>
>> 3.) complete output (2.6.19.2) (with acpi does not work)
>>
>> BIOS-provided physical RAM map:
>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
>> BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
>> BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
>> BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
>> BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
>> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>> BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
>> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
>> Entering add_active_range(0, 0, 159) 0 entries of 256 used
>> Entering add_active_range(0, 256, 245680) 1 entries of 256 used
>> end_pfn_map = 1048576
>> DMI 2.3 present.
>> ACPI: RSDP (v002 ACPIAM ) @
>> 0x00000000000fa850
>> ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0100
>> ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0290
>> ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0390
>> ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfb0400
>> ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @
>> 0x000000003bfbe040
>> ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @
>> 0x0000000000000000
>> Entering add_active_range(0, 0, 159) 0 entries of 256 used
>> Entering add_active_range(0, 256, 245680) 1 entries of 256 used
>> Zone PFN ranges:
>> DMA 0 -> 4096
>> DMA32 4096 -> 1048576
>> Normal 1048576 -> 1048576
>> early_node_map[2] active PFN ranges
>> 0: 0 -> 159
>> 0: 256 -> 245680
>> On node 0 totalpages: 245583
>> DMA zone: 56 pages used for memmap
>> DMA zone: 1474 pages reserved
>> DMA zone: 2469 pages, LIFO batch:0
>> DMA32 zone: 3302 pages used for memmap
>> DMA32 zone: 238282 pages, LIFO batch:31
>> Normal zone: 0 pages used for memmap
>> ACPI: PM-Timer IO Port: 0x808
>> ACPI: Local APIC address 0xfee00000
>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>> Processor #0 (Bootup-CPU)
>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>> IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>> ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
>> IOAPIC[1]: apic_id 2, address 0xfecc0000, GSI 24-47
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>> ACPI: IRQ0 used by override.
>> ACPI: IRQ2 used by override.
>> ACPI: IRQ9 used by override.
>> Setting APIC routing to flat
>> Using ACPI (MADT) for SMP configuration information
>> Nosave address range: 000000000009f000 - 00000000000a0000
>> Nosave address range: 00000000000a0000 - 00000000000e4000
>> Nosave address range: 00000000000e4000 - 0000000000100000
>> Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
>> PERCPU: Allocating 36352 bytes of per cpu data
>> Built 1 zonelists. Total pages: 240751
>> Kernel command line: nfs root=/dev/nfs
>> nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp
>> BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64
>> Initializing CPU#0
>> PID hash table entries: 4096 (order: 12, 32768 bytes)
>> Console: colour VGA+ 80x25
>> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>> Checking aperture...
>> CPU 0: aperture @ f0000000 size 128 MB
>> Memory: 961140k/982720k available (3530k kernel code, 20980k reserved,
>> 1474k data, 264k init)
>> Calibrating delay using timer specific routine.. 4804.06 BogoMIPS
>> (lpj=9608139)
>> Mount-cache hash table entries: 256
>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>> CPU: L2 Cache: 512K (64 bytes/line)
>> SMP alternatives: switching to UP code
>> Freeing SMP alternatives: 32k freed
>> ACPI: Core revision 20060707
>> Using local APIC timer interrupts.
>> result 12501046
>> Detected 12.501 MHz APIC timer.
>> Brought up 1 CPUs
>> testing NMI watchdog ... OK.
>> time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>> time.c: Detected 2400.198 MHz processor.
>> NET: Registered protocol family 16
>> ACPI: bus type pci registered
>> PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>> PCI: Not using MMCONFIG.
>> PCI: Using configuration type 1
>> ACPI: Interpreter enabled
>> ACPI: Using IOAPIC for interrupt routing
>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>> PCI: Probing PCI hardware (bus 00)
>> Boot video device is 0000:01:00.0
>> PCI: Transparent bridge - 0000:00:13.1
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>> Linux Plug and Play Support v0.97 (c) Adam Belay
>> pnp: PnP ACPI init
>> pnp: PnP ACPI: found 12 devices
>> SCSI subsystem initialized
>> libata version 2.00 loaded.
>> PCI: Using ACPI for IRQ routing
>> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post
>> a report
>> PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0
>> PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
>> PCI: Cannot allocate resource region 0 of device 0000:00:00.0
>> PCI-DMA: Disabling IOMMU.
>> pnp: 00:06: ioport range 0x290-0x297 has been reserved
>> PCI: Bridge: 0000:00:01.0
>> IO window: disabled.
>> MEM window: faf00000-fbffffff
>> PREFETCH window: d0000000-dfffffff
>> PCI: Bridge: 0000:00:02.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:03.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:13.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:13.1
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Setting latency timer of device 0000:00:01.0 to 64
>> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
>> PCI: Setting latency timer of device 0000:00:02.0 to 64
>> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31
>> PCI: Setting latency timer of device 0000:00:03.0 to 64
>> PCI: Setting latency timer of device 0000:00:13.0 to 64
>> PCI: Setting latency timer of device 0000:00:13.1 to 64
>> NET: Registered protocol family 2
>> IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>> TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>> TCP: Hash tables configured (established 131072 bind 65536)
>> TCP reno registered
>> VFS: Disk quotas dquot_6.5.1
>> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>> SGI XFS with large block/inode numbers, no debug enabled
>> SGI XFS Quota Management subsystem
>> io scheduler noop registered
>> io scheduler anticipatory registered
>> io scheduler deadline registered
>> io scheduler cfq registered (default)
>> PCI: Setting latency timer of device 0000:00:02.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:02.0:pcie00]
>> Allocate Port Service[0000:00:02.0:pcie02]
>> PCI: Setting latency timer of device 0000:00:03.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:03.0:pcie00]
>> Allocate Port Service[0000:00:03.0:pcie02]
>> ACPI: CPU0 (power states: C1[C1] C2[C2])
>> ACPI: Processor [CPU1] (supports 16 throttling states)
>> ACPI: Getting cpuindex for acpiid 0x2
>> Real Time Clock Driver v1.12ac
>> Linux agpgart interface v0.101 (c) Dave Jones
>> floppy0: no floppy controllers found
>> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>> loop: loaded (max 8 devices)
>> nbd: registered device at major 43
>> Intel(R) PRO/1000 Network Driver - version 7.2.9-k4
>> Copyright (c) 1999-2006 Intel Corporation.
>> e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
>> e100: Copyright(c) 1999-2006 Intel Corporation
>> via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
>> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
>> eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 23.
>> eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link
>> 45e1.
>> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57.
>> netconsole: not configured, aborting
>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>> idebus=xx
>> Probing IDE interface ide0...
>> Probing IDE interface ide1...
>> Adaptec aacraid driver (1.1-5[2409]-mh2)
>> megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
>> megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
>> GDT-HA: Storage RAID Controller Driver. Version: 3.05
>> GDT-HA: Found 0 PCI Storage RAID Controllers
>> 3ware Storage Controller device driver for Linux v1.26.02.001.
>> 3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
>> ahci 0000:00:0f.0: version 2.0
>> ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21
>> ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE
>> mode
>> ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
>> ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 1277
>> ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 1277
>> ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 1277
>> ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 1277
>> scsi0 : ahci
>> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> APIC error on CPU0: 04(08)
>> ata1.00: qc timeout (cmd 0xec)
>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x104)
>> ata1: port is slow to respond, please be patient (Status 0x80)
>> ata1: port failed to respond (30 secs, Status 0x80)
>> ata1: COMRESET failed (device not ready)
>> ata1: hardreset failed, retrying in 5 secs
>> ata1: port is slow to respond, please be patient (Status 0x80)
>> ata1: port failed to respond (30 secs, Status 0x80)
>> ata1: COMRESET failed (device not ready)
>> ata1: hardreset failed, retrying in 5 secs
>> ata1: port is slow to respond, please be patient (Status 0x80)
>> ata1: port failed to respond (30 secs, Status 0x80)
>> ata1: COMRESET failed (device not ready)
>> ata1: reset failed, giving up
>> scsi1 : ahci
>> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> APIC error on CPU0: 08(08)
>> ata2.00: qc timeout (cmd 0xec)
>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
>> ata2: port is slow to respond, please be patient (Status 0x80)
>> ata2: port failed to respond (30 secs, Status 0x80)
>> ata2: COMRESET failed (device not ready)
>> ata2: hardreset failed, retrying in 5 secs
>> ata2: port is slow to respond, please be patient (Status 0x80)
>> ata2: port failed to respond (30 secs, Status 0x80)
>> ata2: COMRESET failed (device not ready)
>> ata2: hardreset failed, retrying in 5 secs
>> ata2: port is slow to respond, please be patient (Status 0x80)
>> ata2: port failed to respond (30 secs, Status 0x80)
>> ata2: COMRESET failed (device not ready)
>> ata2: reset failed, giving up
>> scsi2 : ahci
>> ata3: SATA link down (SStatus 0 SControl 300)
>> scsi3 : ahci
>> ata4: SATA link down (SStatus 0 SControl 300)
>> Fusion MPT base driver 3.04.02
>> Copyright (c) 1999-2005 LSI Logic Corporation
>> Fusion MPT SPI Host driver 3.04.02
>> PNP: No PS/2 controller found. Probing ports directly.
>> serio: i8042 KBD port at 0x60,0x64 irq 1
>> serio: i8042 AUX port at 0x60,0x64 irq 12
>> mice: PS/2 mouse device common for all mice
>> TCP cubic registered
>> NET: Registered protocol family 1
>> NET: Registered protocol family 17
>> powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors
>> (version 2.00.00)
>> powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6
>> powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8
>> powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa
>> powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc
>> powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
>> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>> Sending DHCP requests ., OK
>> IP-Config: Got DHCP answer from 85.158.176.245, my address is
>> 85.158.176.246
>> IP-Config: Complete:
>> device=eth0, addr=85.158.176.246, mask=255.255.255.0,
>> gw=85.158.176.1,
>> host=85.158.176.246, domain=, nis-domain=(none),
>> bootserver=85.158.176.245, rootserver=85.158.176.245, rootpath=
>> Looking up port of RPC 100003/2 on 85.158.176.245
>> Looking up port of RPC 100005/1 on 85.158.176.245
>> VFS: Mounted root (nfs filesystem) readonly.
>> Freeing unused kernel memory: 264k freed
>>
>>
>>
>> 4.) complete output (2.6.19.2) (acpi=off does not work)
>> BIOS-provided physical RAM map:
>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
>> BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
>> BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
>> BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
>> BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
>> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>> BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
>> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
>> Entering add_active_range(0, 0, 159) 0 entries of 256 used
>> Entering add_active_range(0, 256, 245680) 1 entries of 256 used
>> end_pfn_map = 1048576
>> DMI 2.3 present.
>> Entering add_active_range(0, 0, 159) 0 entries of 256 used
>> Entering add_active_range(0, 256, 245680) 1 entries of 256 used
>> Zone PFN ranges:
>> DMA 0 -> 4096
>> DMA32 4096 -> 1048576
>> Normal 1048576 -> 1048576
>> early_node_map[2] active PFN ranges
>> 0: 0 -> 159
>> 0: 256 -> 245680
>> On node 0 totalpages: 245583
>> DMA zone: 56 pages used for memmap
>> DMA zone: 1474 pages reserved
>> DMA zone: 2469 pages, LIFO batch:0
>> DMA32 zone: 3302 pages used for memmap
>> DMA32 zone: 238282 pages, LIFO batch:31
>> Normal zone: 0 pages used for memmap
>> Intel MultiProcessor Specification v1.1
>> MPTABLE: OEM ID: TEMPLATE MPTABLE: Product ID: MPTABLE: APIC at:
>> 0xFEE00000
>> Processor #0 (Bootup-CPU)
>> I/O APIC #1 at 0xFEC00000.
>> I/O APIC #2 at 0xFECC0000.
>> Setting APIC routing to flat
>> Processors: 1
>> Nosave address range: 000000000009f000 - 00000000000a0000
>> Nosave address range: 00000000000a0000 - 00000000000e4000
>> Nosave address range: 00000000000e4000 - 0000000000100000
>> Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
>> PERCPU: Allocating 36352 bytes of per cpu data
>> Built 1 zonelists. Total pages: 240751
>> Kernel command line: nfs root=/dev/nfs
>> nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp
>> acpi=off BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64
>> Initializing CPU#0
>> PID hash table entries: 4096 (order: 12, 32768 bytes)
>> Console: colour VGA+ 80x25
>> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>> Checking aperture...
>> CPU 0: aperture @ f0000000 size 128 MB
>> Memory: 961140k/982720k available (3530k kernel code, 20980k reserved,
>> 1474k data, 264k init)
>> Calibrating delay using timer specific routine.. 4818.82 BogoMIPS
>> (lpj=9637645)
>> Mount-cache hash table entries: 256
>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>> CPU: L2 Cache: 512K (64 bytes/line)
>> SMP alternatives: switching to UP code
>> Freeing SMP alternatives: 32k freed
>> Using local APIC timer interrupts.
>> result 12500751
>> Detected 12.500 MHz APIC timer.
>> Brought up 1 CPUs
>> testing NMI watchdog ... OK.
>> time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer.
>> time.c: Detected 2400.142 MHz processor.
>> NET: Registered protocol family 16
>> PCI: Using configuration type 1
>> ACPI: Interpreter disabled.
>> Linux Plug and Play Support v0.97 (c) Adam Belay
>> pnp: PnP ACPI: disabled
>> SCSI subsystem initialized
>> libata version 2.00 loaded.
>> PCI: Probing PCI hardware
>> PCI: Probing PCI hardware (bus 00)
>> Boot video device is 0000:01:00.0
>> PCI: Transparent bridge - 0000:00:13.1
>> PCI: Using IRQ router default [1106/3287] at 0000:00:11.0
>> PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 27
>> PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 31
>> PCI->APIC IRQ transform: 0000:00:0f.0[B] -> IRQ 21
>> PCI->APIC IRQ transform: 0000:00:10.0[A] -> IRQ 20
>> PCI->APIC IRQ transform: 0000:00:10.1[C] -> IRQ 22
>> PCI->APIC IRQ transform: 0000:00:10.2[B] -> IRQ 21
>> PCI->APIC IRQ transform: 0000:00:10.3[D] -> IRQ 23
>> PCI->APIC IRQ transform: 0000:00:12.0[A] -> IRQ 23
>> PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
>> PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0
>> PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
>> PCI: Cannot allocate resource region 0 of device 0000:00:00.0
>> PCI-DMA: Disabling IOMMU.
>> PCI: Bridge: 0000:00:01.0
>> IO window: disabled.
>> MEM window: faf00000-fbffffff
>> PREFETCH window: d0000000-dfffffff
>> PCI: Bridge: 0000:00:02.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:03.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:13.0
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Bridge: 0000:00:13.1
>> IO window: disabled.
>> MEM window: disabled.
>> PREFETCH window: disabled.
>> PCI: Setting latency timer of device 0000:00:01.0 to 64
>> PCI: Setting latency timer of device 0000:00:02.0 to 64
>> PCI: Setting latency timer of device 0000:00:03.0 to 64
>> PCI: Setting latency timer of device 0000:00:13.0 to 64
>> PCI: Setting latency timer of device 0000:00:13.1 to 64
>> NET: Registered protocol family 2
>> IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>> TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>> TCP: Hash tables configured (established 131072 bind 65536)
>> TCP reno registered
>> VFS: Disk quotas dquot_6.5.1
>> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>> SGI XFS with large block/inode numbers, no debug enabled
>> SGI XFS Quota Management subsystem
>> io scheduler noop registered
>> io scheduler anticipatory registered
>> io scheduler deadline registered
>> io scheduler cfq registered (default)
>> PCI: Setting latency timer of device 0000:00:02.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:02.0:pcie00]
>> Allocate Port Service[0000:00:02.0:pcie02]
>> PCI: Setting latency timer of device 0000:00:03.0 to 64
>> assign_interrupt_mode Found MSI capability
>> Allocate Port Service[0000:00:03.0:pcie00]
>> Allocate Port Service[0000:00:03.0:pcie02]
>> Real Time Clock Driver v1.12ac
>> Linux agpgart interface v0.101 (c) Dave Jones
>> floppy0: no floppy controllers found
>> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>> loop: loaded (max 8 devices)
>> nbd: registered device at major 43
>> Intel(R) PRO/1000 Network Driver - version 7.2.9-k4
>> Copyright (c) 1999-2006 Intel Corporation.
>> e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
>> e100: Copyright(c) 1999-2006 Intel Corporation
>> via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
>> eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 23.
>> eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link
>> 45e1.
>> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57.
>> netconsole: not configured, aborting
>> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>> ide: Assuming 33MHz system bus speed for PIO modes; override with
>> idebus=xx
>> Probing IDE interface ide0...
>> Probing IDE interface ide1...
>> Adaptec aacraid driver (1.1-5[2409]-mh2)
>> megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
>> megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
>> GDT-HA: Storage RAID Controller Driver. Version: 3.05
>> GDT-HA: Found 0 PCI Storage RAID Controllers
>> 3ware Storage Controller device driver for Linux v1.26.02.001.
>> 3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
>> ahci 0000:00:0f.0: version 2.0
>> ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE
>> mode
>> ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
>> ata1: SATA max UDMA/133 cmd 0xFFFFC20000000D00 ctl 0x0 bmdma 0x0 irq 1277
>> ata2: SATA max UDMA/133 cmd 0xFFFFC20000000D80 ctl 0x0 bmdma 0x0 irq 1277
>> ata3: SATA max UDMA/133 cmd 0xFFFFC20000000E00 ctl 0x0 bmdma 0x0 irq 1277
>> ata4: SATA max UDMA/133 cmd 0xFFFFC20000000E80 ctl 0x0 bmdma 0x0 irq 1277
>> scsi0 : ahci
>> ata1: SATA link down (SStatus 601 SControl 300)
>> scsi1 : ahci
>> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>> APIC error on CPU0: 04(08)
>> ata2.00: qc timeout (cmd 0xec)
>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
>> ata2: port is slow to respond, please be patient (Status 0x80)
>> ata2: port failed to respond (30 secs, Status 0x80)
>> ata2: COMRESET failed (device not ready)
>> ata2: hardreset failed, retrying in 5 secs
>> ata2: port is slow to respond, please be patient (Status 0x80)
>> ata2: port failed to respond (30 secs, Status 0x80)
>> ata2: COMRESET failed (device not ready)
>> ata2: hardreset failed, retrying in 5 secs
>> ata2: port is slow to respond, please be patient (Status 0x80)
>> ata2: port failed to respond (30 secs, Status 0x80)
>> ata2: COMRESET failed (device not ready)
>> ata2: reset failed, giving up
>> scsi2 : ahci
>> ata3: SATA link down (SStatus 0 SControl 300)
>> scsi3 : ahci
>> ata4: SATA link down (SStatus 0 SControl 300)
>> Fusion MPT base driver 3.04.02
>> Copyright (c) 1999-2005 LSI Logic Corporation
>> Fusion MPT SPI Host driver 3.04.02
>> PNP: No PS/2 controller found. Probing ports directly.
>> serio: i8042 KBD port at 0x60,0x64 irq 1
>> serio: i8042 AUX port at 0x60,0x64 irq 12
>> mice: PS/2 mouse device common for all mice
>> TCP cubic registered
>> NET: Registered protocol family 1
>> NET: Registered protocol family 17
>> powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors
>> (version 2.00.00)
>> powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12
>> powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc
>> powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa
>> powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x8
>> powernow-k8: 4 : fid 0x10 (2400 MHz), vid 0x6
>> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>> Sending DHCP requests ., OK
>> IP-Config: Got DHCP answer from 85.158.176.245, my address is
>> 85.158.176.246
>> IP-Config: Complete:
>> device=eth0, addr=85.158.176.246, mask=255.255.255.0,
>> gw=85.158.176.1,
>> host=85.158.176.246, domain=, nis-domain=(none),
>> bootserver=85.158.176.245, rootserver=85.158.176.245, rootpath=
>> Looking up port of RPC 100003/2 on 85.158.176.245
>> Looking up port of RPC 100005/1 on 85.158.176.245
>> VFS: Mounted root (nfs filesystem) readonly.
>> Freeing unused kernel memory: 264k freed
>>
>>
>> Stefan
>>
>> Luming Yu schrieb:
>>> On 1/26/07, Stephen Evanchik <evanchsa@gmail.com> wrote:
>>>> On 1/25/07, Luming Yu <luming.yu@gmail.com> wrote:
>>>> > From the log:
>>>> > 2.6.18.3:
>>>> > ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217
>>>> > 2.6.20-rc5:
>>>> > "ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ
>>>> 21"
>>>> >
>>>> > Sounds like acpi interrupt configure problem. Please try acpi=off
>>>> first.
>>>>
>>>>
>>>> Still does not recognize the SATA device (and the machine fails to
>>>> come up). I tested this with 2.6.19.2, 2.6.20-rc5 and -rc6 this
>>>> evening. I am going to build a vanilla 2.6.18 and see if that still
>>>> works as I am currently running an FC5 kernel.
>>>>
>>> Is there any difference in dmesg with acpi=off?
>>> what is your sata driver?
>>
>>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
Hi,
I have recognized the same problem with an ASUS A8V-X. The error first
occurred with the kernel version 2.6.19.X and with 2.6.20 I still have
the same problem (see dems output below).
I also tried different BIOS settings for the SATA controller: SATA and
AHCI, but none worked.
Could this be a problem with this specific board, the ASUS A8V series?
Manuel
Linux version 2.6.20 (root@aibn44) (gcc version 4.1.2 20061115
(prerelease) (Debian 4.1.1-21)) #6 SMP Thu Feb 8 16:09:39 CET 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end:
000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end:
00000000000a0000 type: 2
copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end:
0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000007fed0000 end:
000000007ffd0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000007ffd0000 size: 000000000000e000 end:
000000007ffde000 type: 3
copy_e820_map() start: 000000007ffde000 size: 0000000000022000 end:
0000000080000000 type: 4
copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end:
00000000f0000000 type: 2
copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end:
00000000fec01000 type: 2
copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end:
0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable)
BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data)
BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
Entering add_active_range(0, 0, 524240) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 524240
early_node_map[1] active PFN ranges
0: 0 -> 524240
On node 0 totalpages: 524240
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2303 pages used for memmap
HighMem zone: 292561 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v002 ACPIAM ) @ 0x000fa970
ACPI: XSDT (v001 A M I OEMXSDT 0x02000615 MSFT 0x00000097) @ 0x7ffd0100
ACPI: FADT (v003 A M I OEMFACP 0x02000615 MSFT 0x00000097) @ 0x7ffd0290
ACPI: MADT (v001 A M I OEMAPIC 0x02000615 MSFT 0x00000097) @ 0x7ffd0390
ACPI: MCFG (v001 A M I OEMMCFG 0x02000615 MSFT 0x00000097) @ 0x7ffd03f0
ACPI: OEMB (v001 A M I AMI_OEM 0x02000615 MSFT 0x00000097) @ 0x7ffde040
ACPI: DSDT (v001 A0304 A0304001 0x00000001 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:11 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:11 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Detected 2000.180 MHz processor.
Built 1 zonelists. Total pages: 520145
Kernel command line: root=/dev/sda1 ro apic=off
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2074160k/2096960k available (2947k kernel code, 21576k reserved,
843k data, 224k init, 1179456k highmem)
virtual kernel memory layout:
fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc04ba000 - 0xc04f2000 ( 224 kB)
.data : 0xc03e0ff5 - 0xc04b3f8c ( 843 kB)
.text : 0xc0100000 - 0xc03e0ff5 (2947 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4002.44 BogoMIPS
(lpj=8004891)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000
00000001 00000000 00000003
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001
00000000 00000003
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 15k freed
ACPI: Core revision 20060707
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4000.47 BogoMIPS
(lpj=8000951)
CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000
00000001 00000000 00000003
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001
00000000 00000003
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01
Total of 2 processors activated (8002.92 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
checking TSC synchronization across 2 CPUs:
CPU#0 had 237 usecs TSC skew, fixed it up.
CPU#1 had -237 usecs TSC skew, fixed it up.
Brought up 2 CPUs
migration_cost=238
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
PCI: No mmconfig possible on 0:0
PCI: No mmconfig possible on 0:1
PCI: No mmconfig possible on 0:f
PCI: No mmconfig possible on 0:10
PCI: No mmconfig possible on 0:11
PCI: No mmconfig possible on 0:13
PCI: No mmconfig possible on 0:18
PCI: No mmconfig possible on 1:0
PCI: No mmconfig possible on 5:c
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:13.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
libata version 2.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: fd800000-fe8fffff
PREFETCH window: f9700000-fd6fffff
PCI: Bridge: 0000:02:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.0
IO window: disabled.
MEM window: fe900000-fe9fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.1
IO window: c000-cfff
MEM window: fea00000-feafffff
PREFETCH window: 88000000-880fffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:13.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
PCI: Setting latency timer of device 0000:02:00.1 to 64
PCI: Setting latency timer of device 0000:00:13.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with ACLs, no debug enabled
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input1
ACPI: Sleep Button (CM) [SLPB]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
ACPI: Processor [CPU1] (supports 16 throttling states)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 64M @ 0xdc000000
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin
is 60 seconds).
Hangcheck: Using get_cycles().
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:05:0c.0[A] -> GSI 17 (level, low) -> IRQ 16
eth0: RTL8169s/8110s at 0xf8804c00, 00:11:6b:32:45:74, IRQ 16
pata_via 0000:00:0f.1: version 0.2.1
ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFC00 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFC08 irq 15
scsi0 : pata_via
ata1.00: ATA-7, max UDMA/133, 240121728 sectors: LBA
ata1.00: ata1: dev 0 multi count 16
ata1.01: ATA-7, max UDMA/133, 240121728 sectors: LBA
ata1.01: ata1: dev 1 multi count 16
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/133
scsi1 : pata_via
ata2.00: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5
SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y120P0 YAR4 PQ: 0 ANSI: 5
SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdb: sdb1
sd 0:0:1:0: Attached scsi disk sdb
sd 0:0:1:0: Attached scsi generic sg1 type 0
scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R1202 1026 PQ: 0 ANSI: 5
scsi 1:0:0:0: Attached scsi generic sg2 type 5
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 17
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: debug port 1
ehci_hcd 0000:00:10.4: irq 17, io mem 0xfebff800
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 18
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 18, io base 0x0000e080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 17, io base 0x0000e000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 19
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 19, io base 0x0000dc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 20
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 20, io base 0x0000d880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
hub 4-2:1.0: USB hub found
hub 4-2:1.0: 4 ports detected
usb 4-2.1: new low speed USB device using uhci_hcd and address 3
usb 4-2.1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:10.2-2.1
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input4
input: PC Speaker as /class/input/input5
Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09
09:56:17 2007 UTC).
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
processors (version 2.00.00)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa
powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
Starting balanced_irq
Using IPI Shortcut mode
Time: acpi_pm clocksource has been installed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 224k freed
ahci 0000:00:0f.0: version 2.0
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 19
ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
ata3: SATA max UDMA/133 cmd 0xF8834D00 ctl 0x0 bmdma 0x0 irq 223
ata4: SATA max UDMA/133 cmd 0xF8834D80 ctl 0x0 bmdma 0x0 irq 223
ata5: SATA max UDMA/133 cmd 0xF8834E00 ctl 0x0 bmdma 0x0 irq 223
ata6: SATA max UDMA/133 cmd 0xF8834E80 ctl 0x0 bmdma 0x0 irq 223
scsi2 : ahci
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
APIC error on CPU0: 00(08)
APIC error on CPU1: 00(08)
ata3.00: qc timeout (cmd 0xec)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
ata3.00: qc timeout (cmd 0xec)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
ata3.00: qc timeout (cmd 0xec)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
scsi4 : ahci
ata5: SATA link down (SStatus 0 SControl 300)
scsi5 : ahci
ata6: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:01.0 to 64
EXT3 FS on sda1, internal journal
it87: Found IT8712F chip at 0xd00, revision 7
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: SATA ahci Bug in 2.6.19.x
2007-02-14 8:57 ` SATA ahci Bug in 2.6.19.x Manuel Metz
@ 2007-02-21 11:55 ` Tejun Heo
2007-02-21 16:46 ` Manuel Metz
0 siblings, 1 reply; 16+ messages in thread
From: Tejun Heo @ 2007-02-21 11:55 UTC (permalink / raw)
To: Manuel Metz; +Cc: linux-kernel
Does it work if you give 'irqpoll' kernel parameter?
--
tejun
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: SATA ahci Bug in 2.6.19.x
2007-02-21 11:55 ` Tejun Heo
@ 2007-02-21 16:46 ` Manuel Metz
2007-02-24 6:25 ` Tejun Heo
0 siblings, 1 reply; 16+ messages in thread
From: Manuel Metz @ 2007-02-21 16:46 UTC (permalink / raw)
To: Tejun Heo; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 198 bytes --]
Tejun Heo wrote:
> Does it work if you give 'irqpoll' kernel parameter?
>
Yes this works with "irqpoll". But as you can see in the attached dmesg
output, now I get a bunch of APIC errors ... ?
[-- Attachment #2: dmesg.sata_2.6.20.1.irqpoll --]
[-- Type: text/plain, Size: 22871 bytes --]
Linux version 2.6.20.1 (root@aibn44) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Wed Feb 21 17:06:15 CET 2007
BIOS-provided physical RAM map:
sanitize start
sanitize end
copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
copy_e820_map() start: 0000000000100000 size: 000000007fed0000 end: 000000007ffd0000 type: 1
copy_e820_map() type is E820_RAM
copy_e820_map() start: 000000007ffd0000 size: 000000000000e000 end: 000000007ffde000 type: 3
copy_e820_map() start: 000000007ffde000 size: 0000000000022000 end: 0000000080000000 type: 4
copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable)
BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data)
BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
Entering add_active_range(0, 0, 524240) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 524240
early_node_map[1] active PFN ranges
0: 0 -> 524240
On node 0 totalpages: 524240
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 2303 pages used for memmap
HighMem zone: 292561 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v002 ACPIAM ) @ 0x000fa970
ACPI: XSDT (v001 A M I OEMXSDT 0x02000615 MSFT 0x00000097) @ 0x7ffd0100
ACPI: FADT (v003 A M I OEMFACP 0x02000615 MSFT 0x00000097) @ 0x7ffd0290
ACPI: MADT (v001 A M I OEMAPIC 0x02000615 MSFT 0x00000097) @ 0x7ffd0390
ACPI: MCFG (v001 A M I OEMMCFG 0x02000615 MSFT 0x00000097) @ 0x7ffd03f0
ACPI: OEMB (v001 A M I AMI_OEM 0x02000615 MSFT 0x00000097) @ 0x7ffde040
ACPI: DSDT (v001 A0304 A0304001 0x00000001 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:11 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:11 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
Detected 2000.124 MHz processor.
Built 1 zonelists. Total pages: 520145
Kernel command line: root=/dev/sda1 ro irqpoll
Misrouted IRQ fixup and polling support enabled
This may significantly impact system performance
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2074160k/2096960k available (2948k kernel code, 21576k reserved, 843k data, 224k init, 1179456k highmem)
virtual kernel memory layout:
fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc04ba000 - 0xc04f2000 ( 224 kB)
.data : 0xc03e11d5 - 0xc04b3f8c ( 843 kB)
.text : 0xc0100000 - 0xc03e11d5 (2948 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4007.23 BogoMIPS (lpj=8014471)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(2) -> Core 0
CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 15k freed
ACPI: Core revision 20060707
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4000.38 BogoMIPS (lpj=8000765)
CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1(2) -> Core 1
CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01
Total of 2 processors activated (8007.61 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
checking TSC synchronization across 2 CPUs:
CPU#0 had 283 usecs TSC skew, fixed it up.
CPU#1 had -283 usecs TSC skew, fixed it up.
Brought up 2 CPUs
migration_cost=243
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
PCI: No mmconfig possible on 0:0
PCI: No mmconfig possible on 0:1
PCI: No mmconfig possible on 0:f
PCI: No mmconfig possible on 0:10
PCI: No mmconfig possible on 0:11
PCI: No mmconfig possible on 0:13
PCI: No mmconfig possible on 0:18
PCI: No mmconfig possible on 1:0
PCI: No mmconfig possible on 5:c
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:13.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
libata version 2.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: fd800000-fe8fffff
PREFETCH window: f9700000-fd6fffff
PCI: Bridge: 0000:02:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.0
IO window: disabled.
MEM window: fe900000-fe9fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.1
IO window: c000-cfff
MEM window: fea00000-feafffff
PREFETCH window: 88000000-880fffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:13.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
PCI: Setting latency timer of device 0000:02:00.1 to 64
PCI: Setting latency timer of device 0000:00:13.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Machine check exception polling timer started.
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with ACLs, no debug enabled
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Sleep Button (CM) as /class/input/input1
ACPI: Sleep Button (CM) [SLPB]
input: Power Button (CM) as /class/input/input2
ACPI: Power Button (CM) [PWRB]
ACPI: Processor [CPU1] (supports 16 throttling states)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 64M @ 0xdc000000
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using get_cycles().
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt 0000:05:0c.0[A] -> GSI 17 (level, low) -> IRQ 16
eth0: RTL8169s/8110s at 0xf8804c00, 00:11:6b:32:45:74, IRQ 16
pata_via 0000:00:0f.1: version 0.2.1
ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFC00 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFC08 irq 15
scsi0 : pata_via
ata1.00: ATA-7, max UDMA/133, 240121728 sectors: LBA
ata1.00: ata1: dev 0 multi count 16
ata1.01: ATA-7, max UDMA/133, 240121728 sectors: LBA
ata1.01: ata1: dev 1 multi count 16
ata1.00: configured for UDMA/133
ata1.01: configured for UDMA/133
scsi1 : pata_via
ata2.00: ATAPI, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5
SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y120P0 YAR4 PQ: 0 ANSI: 5
SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 0:0:1:0: Attached scsi disk sdb
sd 0:0:1:0: Attached scsi generic sg1 type 0
scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R1202 1026 PQ: 0 ANSI: 5
scsi 1:0:0:0: Attached scsi generic sg2 type 5
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 17
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: debug port 1
ehci_hcd 0000:00:10.4: irq 17, io mem 0xfebff800
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 18
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 18, io base 0x0000e080
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 17
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 17, io base 0x0000e000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 19
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 19, io base 0x0000dc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 20
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:10.3: irq 20, io base 0x0000d880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 4-2: new full speed USB device using uhci_hcd and address 2
usb 4-2: configuration #1 chosen from 1 choice
hub 4-2:1.0: USB hub found
hub 4-2:1.0: 4 ports detected
usb 4-2.1: new low speed USB device using uhci_hcd and address 3
usb 4-2.1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.2-2.1
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input4
input: PC Speaker as /class/input/input5
Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00)
powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa
powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12
Starting balanced_irq
Using IPI Shortcut mode
Time: acpi_pm clocksource has been installed.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 224k freed
ahci 0000:00:0f.0: version 2.0
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 19
ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
ata3: SATA max UDMA/133 cmd 0xF8834D00 ctl 0x0 bmdma 0x0 irq 223
ata4: SATA max UDMA/133 cmd 0xF8834D80 ctl 0x0 bmdma 0x0 irq 223
ata5: SATA max UDMA/133 cmd 0xF8834E00 ctl 0x0 bmdma 0x0 irq 223
ata6: SATA max UDMA/133 cmd 0xF8834E80 ctl 0x0 bmdma 0x0 irq 223
scsi2 : ahci
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
APIC error on CPU0: 00(08)
APIC error on CPU1: 00(08)
ata3.00: ATA-6, max UDMA/100, 625142448 sectors: LBA48
ata3.00: ata3: dev 0 multi count 16
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
ata3.00: configured for UDMA/100
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
scsi4 : ahci
ata5: SATA link down (SStatus 0 SControl 300)
scsi5 : ahci
ata6: SATA link down (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA WDC WD3200SD-01K 08.0 PQ: 0 ANSI: 5
SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc:<7>APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
sdc1
sd 2:0:0:0: Attached scsi disk sdc
sd 2:0:0:0: Attached scsi generic sg3 type 0
ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:02:01.0 to 64
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
Adding 979848k swap on /dev/sda4. Priority:-1 extents:1 across:979848k
EXT3 FS on sda1, internal journal
it87: Found IT8712F chip at 0xd00, revision 7
it87: in3 is VCC (+5V)
it87: in7 is VCCH (+5V Stand-By)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
XFS mounting filesystem sdb1
Ending clean XFS mount for filesystem: sdb1
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
kjournald starting. Commit interval 5 seconds
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 15
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
r8169: eth0: link up
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT
ttyS1: LSR safety check engaged!
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU1: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU0: 08(08)
APIC error on CPU1: 08(08)
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
eth0: no IPv6 routers present
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: SATA ahci Bug in 2.6.19.x
2007-02-21 16:46 ` Manuel Metz
@ 2007-02-24 6:25 ` Tejun Heo
2007-02-24 7:55 ` Jeff Garzik
0 siblings, 1 reply; 16+ messages in thread
From: Tejun Heo @ 2007-02-24 6:25 UTC (permalink / raw)
To: Manuel Metz, studium; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 316 bytes --]
Manuel Metz wrote:
> Tejun Heo wrote:
>> Does it work if you give 'irqpoll' kernel parameter?
>>
>
> Yes this works with "irqpoll". But as you can see in the attached dmesg
> output, now I get a bunch of APIC errors ... ?
Manuel, Stefan, please try the attached patch over 2.6.20 and report the
result.
--
tejun
[-- Attachment #2: patch --]
[-- Type: text/plain, Size: 971 bytes --]
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 48616c6..882b205 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -209,6 +209,10 @@ struct ahci_port_priv {
unsigned int ncq_saw_dmas:1;
};
+static int msi;
+module_param(msi, int, 0444);
+MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)");
+
static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void ahci_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
@@ -1706,11 +1710,13 @@ static int ahci_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
goto err_out;
}
- if (pci_enable_msi(pdev) == 0)
- have_msi = 1;
- else {
- pci_intx(pdev, 1);
- have_msi = 0;
+ if (msi) {
+ if (pci_enable_msi(pdev) == 0)
+ have_msi = 1;
+ else {
+ pci_intx(pdev, 1);
+ have_msi = 0;
+ }
}
probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL);
^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: SATA ahci Bug in 2.6.19.x
2007-02-24 6:25 ` Tejun Heo
@ 2007-02-24 7:55 ` Jeff Garzik
2007-02-26 8:32 ` Manuel Metz
0 siblings, 1 reply; 16+ messages in thread
From: Jeff Garzik @ 2007-02-24 7:55 UTC (permalink / raw)
To: Tejun Heo; +Cc: Manuel Metz, studium, linux-kernel
Tejun Heo wrote:
> Manuel Metz wrote:
>> Tejun Heo wrote:
>>> Does it work if you give 'irqpoll' kernel parameter?
>>>
>> Yes this works with "irqpoll". But as you can see in the attached dmesg
>> output, now I get a bunch of APIC errors ... ?
>
> Manuel, Stefan, please try the attached patch over 2.6.20 and report the
> result.
Booting with 'pci=nomsi' should achieve the same effect...
Jeff
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: SATA ahci Bug in 2.6.19.x
2007-02-24 7:55 ` Jeff Garzik
@ 2007-02-26 8:32 ` Manuel Metz
0 siblings, 0 replies; 16+ messages in thread
From: Manuel Metz @ 2007-02-26 8:32 UTC (permalink / raw)
To: Jeff Garzik; +Cc: Tejun Heo, studium, linux-kernel
This works fine now. I tried the kernel option, but have not tried the
patch.
Manuel
Jeff Garzik wrote:
> Tejun Heo wrote:
>> Manuel Metz wrote:
>>> Tejun Heo wrote:
>>>> Does it work if you give 'irqpoll' kernel parameter?
>>>>
>>> Yes this works with "irqpoll". But as you can see in the attached dmesg
>>> output, now I get a bunch of APIC errors ... ?
>>
>> Manuel, Stefan, please try the attached patch over 2.6.20 and report the
>> result.
>
> Booting with 'pci=nomsi' should achieve the same effect...
>
> Jeff
>
>
--
---------------------------------------
Manuel Metz ............ Stw@AIfA
Argelander Institut fuer Astronomie
Auf dem Huegel 71 (room 3.06)
D - 53121 Bonn
E-Mail: mmetz@astro.uni-bonn.de
Web: www.astro.uni-bonn.de/~mmetz
Phone: (+49) 228 / 73-3660
Fax: (+49) 228 / 73-3672
---------------------------------------
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: SATA ahci Bug in 2.6.19.x
2007-01-26 9:19 ` Stefan Priebe - FH
@ 2007-01-30 10:44 ` Stefan Priebe - FH
0 siblings, 0 replies; 16+ messages in thread
From: Stefan Priebe - FH @ 2007-01-30 10:44 UTC (permalink / raw)
To: Stefan Priebe - FH; +Cc: Luming Yu, Stephen Evanchik, linux-kernel
Hi!
Any News?
Stefan
Stefan Priebe - FH schrieb:
> Hi!
>
> acpi=off does not help i've already tried that.
>
>
> Ok here some outputs:
> 1.) complete dmesg with 2.6.16.27 (works)
>
> Linux version 2.6.16.27amd (root@server275-han) (gcc version 3.3.5
> (Debian 1:3.3.5-13)) #6 SMP Sat Aug 26 14:29:07 CEST 2006
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
> BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
> BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
> BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
> ACPI: RSDP (v002 ACPIAM ) @
> 0x00000000000fa850
> ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @
> 0x000000003bfb0100
> ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @
> 0x000000003bfb0290
> ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @
> 0x000000003bfb0390
> ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @
> 0x000000003bfb0400
> ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @
> 0x000000003bfbe040
> ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @
> 0x0000000000000000
> Scanning NUMA topology in Northbridge 24
> Number of nodes 1
> Node 0 MemBase 0000000000000000 Limit 000000003bfb0000
> NUMA: Using 63 for the hash shift.
> Using node hash shift of 63
> Bootmem setup node 0 0000000000000000-000000003bfb0000
> On node 0 totalpages: 240991
> DMA zone: 2709 pages, LIFO batch:0
> DMA32 zone: 238282 pages, LIFO batch:31
> Normal zone: 0 pages, LIFO batch:0
> HighMem zone: 0 pages, LIFO batch:0
> ACPI: PM-Timer IO Port: 0x808
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 15:15 APIC version 16
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
> ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
> IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Setting APIC routing to flat
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
> Checking aperture...
> CPU 0: aperture @ f0000000 size 128 MB
> Built 1 zonelists
> Kernel command line: root=/dev/sda6 ro rootflags=quota Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 131072 bytes)
> time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
> time.c: Detected 2400.214 MHz processor.
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
> Memory: 962212k/982720k available (2939k kernel code, 20120k reserved,
> 1327k data, 220k init)
> Calibrating delay using timer specific routine.. 4810.51 BogoMIPS
> (lpj=9621030)
> Mount-cache hash table entries: 256
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU 0(1) -> Node 0 -> Core 0
> Using local APIC timer interrupts.
> result 12501128
> Detected 12.501 MHz APIC timer.
> Brought up 1 CPUs
> testing NMI watchdog ... OK.
> migration_cost=0
> DMI 2.3 present.
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: Using configuration type 1
> PCI: Using MMCONFIG at e0000000
> ACPI: Subsystem revision 20060127
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> Boot video device is 0000:01:00.0
> PCI: Transparent bridge - 0000:00:13.1
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 12 devices
> SCSI subsystem initialized
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report
> PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0
> PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
> PCI-DMA: Disabling IOMMU.
> pnp: 00:06: ioport range 0x290-0x297 has been reserved
> PCI: Bridge: 0000:00:01.0
> IO window: disabled.
> MEM window: faf00000-fbffffff
> PREFETCH window: d0000000-dfffffff
> PCI: Bridge: 0000:00:02.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:03.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:13.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:13.1
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> GSI 16 sharing vector 0xA9 and IRQ 16
> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> GSI 17 sharing vector 0xB1 and IRQ 17
> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
> PCI: Setting latency timer of device 0000:00:03.0 to 64
> PCI: Setting latency timer of device 0000:00:13.0 to 64
> PCI: Setting latency timer of device 0000:00:13.1 to 64
> IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> SGI XFS with large block/inode numbers, no debug enabled
> SGI XFS Quota Management subsystem
> io scheduler noop registered
> io scheduler anticipatory registered (default)
> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:02.0:pcie00]
> Allocate Port Service[0000:00:02.0:pcie01]
> Allocate Port Service[0000:00:02.0:pcie02]
> Allocate Port Service[0000:00:02.0:pcie03]
> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
> PCI: Setting latency timer of device 0000:00:03.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:03.0:pcie00]
> Allocate Port Service[0000:00:03.0:pcie01]
> Allocate Port Service[0000:00:03.0:pcie02]
> Allocate Port Service[0000:00:03.0:pcie03]
> ACPI: CPU0 (power states: C1[C1] C2[C2])
> ACPI: Processor [CPU1] (supports 16 throttling states)
> Real Time Clock Driver v1.12ac
> Linux agpgart interface v0.101 (c) Dave Jones
> PNP: No PS/2 controller found. Probing ports directly.
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> isa bounce pool size: 16 pages
> floppy0: no floppy controllers found
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> loop: loaded (max 8 devices)
> nbd: registered device at major 43
> Intel(R) PRO/1000 Network Driver - version 6.3.9-k4
> Copyright (c) 1999-2005 Intel Corporation.
> e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
> e100: Copyright(c) 1999-2005 Intel Corporation
> via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
> GSI 18 sharing vector 0xD1 and IRQ 18
> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 209
> eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 209.
> eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49.
> netconsole: device eth0 not up yet, forcing it
> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
> netconsole: carrier detect appears untrustworthy, waiting 4 seconds
> netconsole: network logging started
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> Probing IDE interface ide0...
> Probing IDE interface ide1...
> Adaptec aacraid driver (1.1-4 Aug 26 2006 14:27:50)
> megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
> megaraid: 2.20.4.7 (Release Date: Mon Nov 14 12:27:22 EST 2005)
> GDT-HA: Storage RAID Controller Driver. Version: 3.04
> GDT-HA: Found 0 PCI Storage RAID Controllers
> 3ware Storage Controller device driver for Linux v1.26.02.001.
> 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
> libata version 1.20 loaded.
> ahci 0000:00:0f.0: version 1.2
> GSI 19 sharing vector 0xD9 and IRQ 19
> ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217
> ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
> ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
> ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 225
> ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 225
> ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 225
> ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 225
> ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:bc01 87:4023
> 88:40ff
> ata1: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48
> ata1: dev 0 configured for UDMA/133
> scsi0 : ahci
> ata2: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:bc01 87:4023
> 88:40ff
> ata2: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48
> ata2: dev 0 configured for UDMA/133
> scsi1 : ahci
> ata3: no device found (phy stat 00000000)
> scsi2 : ahci
> ata4: no device found (phy stat 00000000)
> scsi3 : ahci
> Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
> Type: Direct-Access ANSI SCSI revision: 05
> Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
> Type: Direct-Access ANSI SCSI revision: 05
> SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 3a 00 00
> SCSI device sda: drive cache: write back
> SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 3a 00 00
> SCSI device sda: drive cache: write back
> sda: sda1 < sda5 sda6 sda7 >
> sd 0:0:0:0: Attached scsi disk sda
> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: 00 3a 00 00
> SCSI device sdb: drive cache: write back
> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: 00 3a 00 00
> SCSI device sdb: drive cache: write back
> sdb: sdb1 < sdb5 sdb6 sdb7 >
> sd 1:0:0:0: Attached scsi disk sdb
> Fusion MPT base driver 3.03.07
> Copyright (c) 1999-2005 LSI Logic Corporation
> Fusion MPT SPI Host driver 3.03.07
> mice: PS/2 mouse device common for all mice
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
> TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> TCP bic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.0)
> powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6 (1400 mV)
> powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8 (1350 mV)
> powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa (1300 mV)
> powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc (1250 mV)
> powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
> cpu_init done, current fid 0x10, vid 0x6
> XFS mounting filesystem sda6
> Ending clean XFS mount for filesystem: sda6
> VFS: Mounted root (xfs filesystem) readonly.
> Freeing unused kernel memory: 220k freed
> Adding 1349420k swap on /dev/sda7. Priority:-1 extents:1 across:1349420k
>
>
>
> 2.) complete dmesg output with 2.6.18.6 (works)
> Linux version 2.6.18.3amd (root@neuerserver) (gcc version 3.3.5 (Debian
> 1:3.3.5-13)) #2 SMP Wed Dec 20 14:26:51 CET 2006
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
> BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
> BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
> BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
> DMI 2.3 present.
> ACPI: RSDP (v002 ACPIAM ) @
> 0x00000000000fa850
> ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @
> 0x000000003bfb0100
> ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @
> 0x000000003bfb0290
> ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @
> 0x000000003bfb0390
> ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @
> 0x000000003bfb0400
> ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @
> 0x000000003bfbe040
> ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @
> 0x0000000000000000
> On node 0 totalpages: 240803
> DMA zone: 2521 pages, LIFO batch:0
> DMA32 zone: 238282 pages, LIFO batch:31
> ACPI: PM-Timer IO Port: 0x808
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 15:15 APIC version 16
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
> ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
> IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Setting APIC routing to flat
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
> Built 1 zonelists. Total pages: 240803
> Kernel command line: nfs root=/dev/nfs
> nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp
> BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
> time.c: Detected 2400.084 MHz processor.
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
> Checking aperture...
> CPU 0: aperture @ f0000000 size 128 MB
> Memory: 961352k/982720k available (3487k kernel code, 20768k reserved,
> 1452k data, 228k init)
> Calibrating delay using timer specific routine.. 4804.44 BogoMIPS
> (lpj=9608882)
> Mount-cache hash table entries: 256
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> SMP alternatives: switching to UP code
> Freeing SMP alternatives: 28k freed
> ACPI: Core revision 20060707
> Using local APIC timer interrupts.
> result 12500453
> Detected 12.500 MHz APIC timer.
> Brought up 1 CPUs
> testing NMI watchdog ... OK.
> migration_cost=0
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
> PCI: Not using MMCONFIG.
> PCI: Using configuration type 1
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> Boot video device is 0000:01:00.0
> PCI: Transparent bridge - 0000:00:13.1
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 12 devices
> SCSI subsystem initialized
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report
> PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0
> PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
> PCI-DMA: Disabling IOMMU.
> pnp: 00:06: ioport range 0x290-0x297 has been reserved
> PCI: Bridge: 0000:00:01.0
> IO window: disabled.
> MEM window: faf00000-fbffffff
> PREFETCH window: d0000000-dfffffff
> PCI: Bridge: 0000:00:02.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:03.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:13.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:13.1
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> GSI 16 sharing vector 0xA9 and IRQ 16
> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> GSI 17 sharing vector 0xB1 and IRQ 17
> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
> PCI: Setting latency timer of device 0000:00:03.0 to 64
> PCI: Setting latency timer of device 0000:00:13.0 to 64
> PCI: Setting latency timer of device 0000:00:13.1 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
> TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> SGI XFS with large block/inode numbers, no debug enabled
> SGI XFS Quota Management subsystem
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:02.0:pcie00]
> Allocate Port Service[0000:00:02.0:pcie02]
> PCI: Setting latency timer of device 0000:00:03.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:03.0:pcie00]
> Allocate Port Service[0000:00:03.0:pcie02]
> ACPI: CPU0 (power states: C1[C1] C2[C2])
> ACPI: Processor [CPU1] (supports 16 throttling states)
> ACPI: Getting cpuindex for acpiid 0x2
> Real Time Clock Driver v1.12ac
> Linux agpgart interface v0.101 (c) Dave Jones
> floppy0: no floppy controllers found
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> loop: loaded (max 8 devices)
> nbd: registered device at major 43
> Intel(R) PRO/1000 Network Driver - version 7.1.9-k4
> Copyright (c) 1999-2006 Intel Corporation.
> e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
> e100: Copyright(c) 1999-2005 Intel Corporation
> via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
> GSI 18 sharing vector 0xD1 and IRQ 18
> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 209
> eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 209.
> eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
> netconsole: not configured, aborting
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> Probing IDE interface ide0...
> Probing IDE interface ide1...
> Adaptec aacraid driver (1.1-5[2409]-mh2)
> megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
> megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
> GDT-HA: Storage RAID Controller Driver. Version: 3.05
> GDT-HA: Found 0 PCI Storage RAID Controllers
> 3ware Storage Controller device driver for Linux v1.26.02.001.
> 3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
> libata version 2.00 loaded.
> ahci 0000:00:0f.0: version 2.0
> GSI 19 sharing vector 0xD9 and IRQ 19
> ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217
> ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
> ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
> ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 225
> ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 225
> ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 225
> ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 225
> scsi0 : ahci
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata1.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32)
> ata1.00: ata1: dev 0 multi count 16
> ata1.00: configured for UDMA/133
> scsi1 : ahci
> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata2.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32)
> ata2.00: ata2: dev 0 multi count 16
> ata2.00: configured for UDMA/133
> scsi2 : ahci
> ata3: SATA link down (SStatus 0 SControl 300)
> scsi3 : ahci
> ata4: SATA link down (SStatus 0 SControl 300)
> Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
> Type: Direct-Access ANSI SCSI revision: 05
> Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
> Type: Direct-Access ANSI SCSI revision: 05
> SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 3a 00 00
> SCSI device sda: drive cache: write back
> SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
> sda: Write Protect is off
> sda: Mode Sense: 00 3a 00 00
> SCSI device sda: drive cache: write back
> sda: sda1 < sda5 sda6 sda7 >
> sd 0:0:0:0: Attached scsi disk sda
> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: 00 3a 00 00
> SCSI device sdb: drive cache: write back
> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
> sdb: Write Protect is off
> sdb: Mode Sense: 00 3a 00 00
> SCSI device sdb: drive cache: write back
> sdb: sdb1 < sdb5 sdb6 sdb7 >
> sd 1:0:0:0: Attached scsi disk sdb
> Fusion MPT base driver 3.04.01
> Copyright (c) 1999-2005 LSI Logic Corporation
> Fusion MPT SPI Host driver 3.04.01
> PNP: No PS/2 controller found. Probing ports directly.
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> mice: PS/2 mouse device common for all mice
> TCP bic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors
> (version 2.00.00)
> powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6
> powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8
> powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa
> powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc
> powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>
>
> 3.) complete output (2.6.19.2) (with acpi does not work)
>
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
> BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
> BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
> BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
> Entering add_active_range(0, 0, 159) 0 entries of 256 used
> Entering add_active_range(0, 256, 245680) 1 entries of 256 used
> end_pfn_map = 1048576
> DMI 2.3 present.
> ACPI: RSDP (v002 ACPIAM ) @
> 0x00000000000fa850
> ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @
> 0x000000003bfb0100
> ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @
> 0x000000003bfb0290
> ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @
> 0x000000003bfb0390
> ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @
> 0x000000003bfb0400
> ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @
> 0x000000003bfbe040
> ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @
> 0x0000000000000000
> Entering add_active_range(0, 0, 159) 0 entries of 256 used
> Entering add_active_range(0, 256, 245680) 1 entries of 256 used
> Zone PFN ranges:
> DMA 0 -> 4096
> DMA32 4096 -> 1048576
> Normal 1048576 -> 1048576
> early_node_map[2] active PFN ranges
> 0: 0 -> 159
> 0: 256 -> 245680
> On node 0 totalpages: 245583
> DMA zone: 56 pages used for memmap
> DMA zone: 1474 pages reserved
> DMA zone: 2469 pages, LIFO batch:0
> DMA32 zone: 3302 pages used for memmap
> DMA32 zone: 238282 pages, LIFO batch:31
> Normal zone: 0 pages used for memmap
> ACPI: PM-Timer IO Port: 0x808
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 (Bootup-CPU)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
> ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
> IOAPIC[1]: apic_id 2, address 0xfecc0000, GSI 24-47
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Setting APIC routing to flat
> Using ACPI (MADT) for SMP configuration information
> Nosave address range: 000000000009f000 - 00000000000a0000
> Nosave address range: 00000000000a0000 - 00000000000e4000
> Nosave address range: 00000000000e4000 - 0000000000100000
> Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
> PERCPU: Allocating 36352 bytes of per cpu data
> Built 1 zonelists. Total pages: 240751
> Kernel command line: nfs root=/dev/nfs
> nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp
> BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
> Checking aperture...
> CPU 0: aperture @ f0000000 size 128 MB
> Memory: 961140k/982720k available (3530k kernel code, 20980k reserved,
> 1474k data, 264k init)
> Calibrating delay using timer specific routine.. 4804.06 BogoMIPS
> (lpj=9608139)
> Mount-cache hash table entries: 256
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> SMP alternatives: switching to UP code
> Freeing SMP alternatives: 32k freed
> ACPI: Core revision 20060707
> Using local APIC timer interrupts.
> result 12501046
> Detected 12.501 MHz APIC timer.
> Brought up 1 CPUs
> testing NMI watchdog ... OK.
> time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
> time.c: Detected 2400.198 MHz processor.
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
> PCI: Not using MMCONFIG.
> PCI: Using configuration type 1
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> Boot video device is 0000:01:00.0
> PCI: Transparent bridge - 0000:00:13.1
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 12 devices
> SCSI subsystem initialized
> libata version 2.00 loaded.
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report
> PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0
> PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
> PCI: Cannot allocate resource region 0 of device 0000:00:00.0
> PCI-DMA: Disabling IOMMU.
> pnp: 00:06: ioport range 0x290-0x297 has been reserved
> PCI: Bridge: 0000:00:01.0
> IO window: disabled.
> MEM window: faf00000-fbffffff
> PREFETCH window: d0000000-dfffffff
> PCI: Bridge: 0000:00:02.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:03.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:13.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:13.1
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31
> PCI: Setting latency timer of device 0000:00:03.0 to 64
> PCI: Setting latency timer of device 0000:00:13.0 to 64
> PCI: Setting latency timer of device 0000:00:13.1 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
> TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> SGI XFS with large block/inode numbers, no debug enabled
> SGI XFS Quota Management subsystem
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:02.0:pcie00]
> Allocate Port Service[0000:00:02.0:pcie02]
> PCI: Setting latency timer of device 0000:00:03.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:03.0:pcie00]
> Allocate Port Service[0000:00:03.0:pcie02]
> ACPI: CPU0 (power states: C1[C1] C2[C2])
> ACPI: Processor [CPU1] (supports 16 throttling states)
> ACPI: Getting cpuindex for acpiid 0x2
> Real Time Clock Driver v1.12ac
> Linux agpgart interface v0.101 (c) Dave Jones
> floppy0: no floppy controllers found
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> loop: loaded (max 8 devices)
> nbd: registered device at major 43
> Intel(R) PRO/1000 Network Driver - version 7.2.9-k4
> Copyright (c) 1999-2006 Intel Corporation.
> e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
> e100: Copyright(c) 1999-2006 Intel Corporation
> via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
> eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 23.
> eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57.
> netconsole: not configured, aborting
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> Probing IDE interface ide0...
> Probing IDE interface ide1...
> Adaptec aacraid driver (1.1-5[2409]-mh2)
> megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
> megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
> GDT-HA: Storage RAID Controller Driver. Version: 3.05
> GDT-HA: Found 0 PCI Storage RAID Controllers
> 3ware Storage Controller device driver for Linux v1.26.02.001.
> 3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
> ahci 0000:00:0f.0: version 2.0
> ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21
> ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
> ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
> ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 1277
> ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 1277
> ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 1277
> ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 1277
> scsi0 : ahci
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> APIC error on CPU0: 04(08)
> ata1.00: qc timeout (cmd 0xec)
> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x104)
> ata1: port is slow to respond, please be patient (Status 0x80)
> ata1: port failed to respond (30 secs, Status 0x80)
> ata1: COMRESET failed (device not ready)
> ata1: hardreset failed, retrying in 5 secs
> ata1: port is slow to respond, please be patient (Status 0x80)
> ata1: port failed to respond (30 secs, Status 0x80)
> ata1: COMRESET failed (device not ready)
> ata1: hardreset failed, retrying in 5 secs
> ata1: port is slow to respond, please be patient (Status 0x80)
> ata1: port failed to respond (30 secs, Status 0x80)
> ata1: COMRESET failed (device not ready)
> ata1: reset failed, giving up
> scsi1 : ahci
> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> APIC error on CPU0: 08(08)
> ata2.00: qc timeout (cmd 0xec)
> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
> ata2: port is slow to respond, please be patient (Status 0x80)
> ata2: port failed to respond (30 secs, Status 0x80)
> ata2: COMRESET failed (device not ready)
> ata2: hardreset failed, retrying in 5 secs
> ata2: port is slow to respond, please be patient (Status 0x80)
> ata2: port failed to respond (30 secs, Status 0x80)
> ata2: COMRESET failed (device not ready)
> ata2: hardreset failed, retrying in 5 secs
> ata2: port is slow to respond, please be patient (Status 0x80)
> ata2: port failed to respond (30 secs, Status 0x80)
> ata2: COMRESET failed (device not ready)
> ata2: reset failed, giving up
> scsi2 : ahci
> ata3: SATA link down (SStatus 0 SControl 300)
> scsi3 : ahci
> ata4: SATA link down (SStatus 0 SControl 300)
> Fusion MPT base driver 3.04.02
> Copyright (c) 1999-2005 LSI Logic Corporation
> Fusion MPT SPI Host driver 3.04.02
> PNP: No PS/2 controller found. Probing ports directly.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> TCP cubic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors
> (version 2.00.00)
> powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6
> powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8
> powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa
> powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc
> powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
> Sending DHCP requests ., OK
> IP-Config: Got DHCP answer from 85.158.176.245, my address is
> 85.158.176.246
> IP-Config: Complete:
> device=eth0, addr=85.158.176.246, mask=255.255.255.0,
> gw=85.158.176.1,
> host=85.158.176.246, domain=, nis-domain=(none),
> bootserver=85.158.176.245, rootserver=85.158.176.245, rootpath=
> Looking up port of RPC 100003/2 on 85.158.176.245
> Looking up port of RPC 100005/1 on 85.158.176.245
> VFS: Mounted root (nfs filesystem) readonly.
> Freeing unused kernel memory: 264k freed
>
>
>
> 4.) complete output (2.6.19.2) (acpi=off does not work)
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
> BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
> BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
> BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
> Entering add_active_range(0, 0, 159) 0 entries of 256 used
> Entering add_active_range(0, 256, 245680) 1 entries of 256 used
> end_pfn_map = 1048576
> DMI 2.3 present.
> Entering add_active_range(0, 0, 159) 0 entries of 256 used
> Entering add_active_range(0, 256, 245680) 1 entries of 256 used
> Zone PFN ranges:
> DMA 0 -> 4096
> DMA32 4096 -> 1048576
> Normal 1048576 -> 1048576
> early_node_map[2] active PFN ranges
> 0: 0 -> 159
> 0: 256 -> 245680
> On node 0 totalpages: 245583
> DMA zone: 56 pages used for memmap
> DMA zone: 1474 pages reserved
> DMA zone: 2469 pages, LIFO batch:0
> DMA32 zone: 3302 pages used for memmap
> DMA32 zone: 238282 pages, LIFO batch:31
> Normal zone: 0 pages used for memmap
> Intel MultiProcessor Specification v1.1
> MPTABLE: OEM ID: TEMPLATE MPTABLE: Product ID: MPTABLE: APIC at:
> 0xFEE00000
> Processor #0 (Bootup-CPU)
> I/O APIC #1 at 0xFEC00000.
> I/O APIC #2 at 0xFECC0000.
> Setting APIC routing to flat
> Processors: 1
> Nosave address range: 000000000009f000 - 00000000000a0000
> Nosave address range: 00000000000a0000 - 00000000000e4000
> Nosave address range: 00000000000e4000 - 0000000000100000
> Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
> PERCPU: Allocating 36352 bytes of per cpu data
> Built 1 zonelists. Total pages: 240751
> Kernel command line: nfs root=/dev/nfs
> nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp acpi=off
> BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
> Checking aperture...
> CPU 0: aperture @ f0000000 size 128 MB
> Memory: 961140k/982720k available (3530k kernel code, 20980k reserved,
> 1474k data, 264k init)
> Calibrating delay using timer specific routine.. 4818.82 BogoMIPS
> (lpj=9637645)
> Mount-cache hash table entries: 256
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> SMP alternatives: switching to UP code
> Freeing SMP alternatives: 32k freed
> Using local APIC timer interrupts.
> result 12500751
> Detected 12.500 MHz APIC timer.
> Brought up 1 CPUs
> testing NMI watchdog ... OK.
> time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer.
> time.c: Detected 2400.142 MHz processor.
> NET: Registered protocol family 16
> PCI: Using configuration type 1
> ACPI: Interpreter disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI: disabled
> SCSI subsystem initialized
> libata version 2.00 loaded.
> PCI: Probing PCI hardware
> PCI: Probing PCI hardware (bus 00)
> Boot video device is 0000:01:00.0
> PCI: Transparent bridge - 0000:00:13.1
> PCI: Using IRQ router default [1106/3287] at 0000:00:11.0
> PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 27
> PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 31
> PCI->APIC IRQ transform: 0000:00:0f.0[B] -> IRQ 21
> PCI->APIC IRQ transform: 0000:00:10.0[A] -> IRQ 20
> PCI->APIC IRQ transform: 0000:00:10.1[C] -> IRQ 22
> PCI->APIC IRQ transform: 0000:00:10.2[B] -> IRQ 21
> PCI->APIC IRQ transform: 0000:00:10.3[D] -> IRQ 23
> PCI->APIC IRQ transform: 0000:00:12.0[A] -> IRQ 23
> PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
> PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0
> PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
> PCI: Cannot allocate resource region 0 of device 0000:00:00.0
> PCI-DMA: Disabling IOMMU.
> PCI: Bridge: 0000:00:01.0
> IO window: disabled.
> MEM window: faf00000-fbffffff
> PREFETCH window: d0000000-dfffffff
> PCI: Bridge: 0000:00:02.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:03.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:13.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:13.1
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> PCI: Setting latency timer of device 0000:00:03.0 to 64
> PCI: Setting latency timer of device 0000:00:13.0 to 64
> PCI: Setting latency timer of device 0000:00:13.1 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
> TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> SGI XFS with large block/inode numbers, no debug enabled
> SGI XFS Quota Management subsystem
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:02.0:pcie00]
> Allocate Port Service[0000:00:02.0:pcie02]
> PCI: Setting latency timer of device 0000:00:03.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:03.0:pcie00]
> Allocate Port Service[0000:00:03.0:pcie02]
> Real Time Clock Driver v1.12ac
> Linux agpgart interface v0.101 (c) Dave Jones
> floppy0: no floppy controllers found
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> loop: loaded (max 8 devices)
> nbd: registered device at major 43
> Intel(R) PRO/1000 Network Driver - version 7.2.9-k4
> Copyright (c) 1999-2006 Intel Corporation.
> e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
> e100: Copyright(c) 1999-2006 Intel Corporation
> via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
> eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 23.
> eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57.
> netconsole: not configured, aborting
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> Probing IDE interface ide0...
> Probing IDE interface ide1...
> Adaptec aacraid driver (1.1-5[2409]-mh2)
> megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
> megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
> GDT-HA: Storage RAID Controller Driver. Version: 3.05
> GDT-HA: Found 0 PCI Storage RAID Controllers
> 3ware Storage Controller device driver for Linux v1.26.02.001.
> 3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
> ahci 0000:00:0f.0: version 2.0
> ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
> ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
> ata1: SATA max UDMA/133 cmd 0xFFFFC20000000D00 ctl 0x0 bmdma 0x0 irq 1277
> ata2: SATA max UDMA/133 cmd 0xFFFFC20000000D80 ctl 0x0 bmdma 0x0 irq 1277
> ata3: SATA max UDMA/133 cmd 0xFFFFC20000000E00 ctl 0x0 bmdma 0x0 irq 1277
> ata4: SATA max UDMA/133 cmd 0xFFFFC20000000E80 ctl 0x0 bmdma 0x0 irq 1277
> scsi0 : ahci
> ata1: SATA link down (SStatus 601 SControl 300)
> scsi1 : ahci
> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> APIC error on CPU0: 04(08)
> ata2.00: qc timeout (cmd 0xec)
> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
> ata2: port is slow to respond, please be patient (Status 0x80)
> ata2: port failed to respond (30 secs, Status 0x80)
> ata2: COMRESET failed (device not ready)
> ata2: hardreset failed, retrying in 5 secs
> ata2: port is slow to respond, please be patient (Status 0x80)
> ata2: port failed to respond (30 secs, Status 0x80)
> ata2: COMRESET failed (device not ready)
> ata2: hardreset failed, retrying in 5 secs
> ata2: port is slow to respond, please be patient (Status 0x80)
> ata2: port failed to respond (30 secs, Status 0x80)
> ata2: COMRESET failed (device not ready)
> ata2: reset failed, giving up
> scsi2 : ahci
> ata3: SATA link down (SStatus 0 SControl 300)
> scsi3 : ahci
> ata4: SATA link down (SStatus 0 SControl 300)
> Fusion MPT base driver 3.04.02
> Copyright (c) 1999-2005 LSI Logic Corporation
> Fusion MPT SPI Host driver 3.04.02
> PNP: No PS/2 controller found. Probing ports directly.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> TCP cubic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors
> (version 2.00.00)
> powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12
> powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc
> powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa
> powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x8
> powernow-k8: 4 : fid 0x10 (2400 MHz), vid 0x6
> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
> Sending DHCP requests ., OK
> IP-Config: Got DHCP answer from 85.158.176.245, my address is
> 85.158.176.246
> IP-Config: Complete:
> device=eth0, addr=85.158.176.246, mask=255.255.255.0,
> gw=85.158.176.1,
> host=85.158.176.246, domain=, nis-domain=(none),
> bootserver=85.158.176.245, rootserver=85.158.176.245, rootpath=
> Looking up port of RPC 100003/2 on 85.158.176.245
> Looking up port of RPC 100005/1 on 85.158.176.245
> VFS: Mounted root (nfs filesystem) readonly.
> Freeing unused kernel memory: 264k freed
>
>
> Stefan
>
> Luming Yu schrieb:
>> On 1/26/07, Stephen Evanchik <evanchsa@gmail.com> wrote:
>>> On 1/25/07, Luming Yu <luming.yu@gmail.com> wrote:
>>> > From the log:
>>> > 2.6.18.3:
>>> > ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217
>>> > 2.6.20-rc5:
>>> > "ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21"
>>> >
>>> > Sounds like acpi interrupt configure problem. Please try acpi=off
>>> first.
>>>
>>>
>>> Still does not recognize the SATA device (and the machine fails to
>>> come up). I tested this with 2.6.19.2, 2.6.20-rc5 and -rc6 this
>>> evening. I am going to build a vanilla 2.6.18 and see if that still
>>> works as I am currently running an FC5 kernel.
>>>
>> Is there any difference in dmesg with acpi=off?
>> what is your sata driver?
>
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: SATA ahci Bug in 2.6.19.x
2007-01-26 6:18 ` Stephen Evanchik
@ 2007-01-26 10:33 ` Alan
0 siblings, 0 replies; 16+ messages in thread
From: Alan @ 2007-01-26 10:33 UTC (permalink / raw)
To: Stephen Evanchik; +Cc: Luming Yu, Stefan Priebe - FH, linux-kernel
> The only difference is that I don't see the "ACPI: PCI Interrupt
> 0000:00:0f.0[B] -> GSI
> 21 (level, low) -> IRQ 19" printk. The driver is AHCI but the device
> is a VIA chip.
>
> I'll get a caputre of the boot log when I find my serial cable. This
> could be related to the VIA PIC quirks that was changed by Alan.
Stuff a printk in and check by all means but _in theory_ the VIA quirk
shouldn't touch IRQ > 15 as those are not PIC but APIC routed.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: SATA ahci Bug in 2.6.19.x
2007-01-26 5:22 ` Luming Yu
2007-01-26 6:18 ` Stephen Evanchik
@ 2007-01-26 9:19 ` Stefan Priebe - FH
2007-01-30 10:44 ` Stefan Priebe - FH
1 sibling, 1 reply; 16+ messages in thread
From: Stefan Priebe - FH @ 2007-01-26 9:19 UTC (permalink / raw)
To: Luming Yu; +Cc: Stephen Evanchik, linux-kernel
Hi!
acpi=off does not help i've already tried that.
Ok here some outputs:
1.) complete dmesg with 2.6.16.27 (works)
Linux version 2.6.16.27amd (root@server275-han) (gcc version 3.3.5
(Debian 1:3.3.5-13)) #6 SMP Sat Aug 26 14:29:07 CEST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
ACPI: RSDP (v002 ACPIAM ) @
0x00000000000fa850
ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @
0x000000003bfb0100
ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @
0x000000003bfb0290
ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @
0x000000003bfb0390
ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @
0x000000003bfb0400
ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @
0x000000003bfbe040
ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @
0x0000000000000000
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 000000003bfb0000
NUMA: Using 63 for the hash shift.
Using node hash shift of 63
Bootmem setup node 0 0000000000000000-000000003bfb0000
On node 0 totalpages: 240991
DMA zone: 2709 pages, LIFO batch:0
DMA32 zone: 238282 pages, LIFO batch:31
Normal zone: 0 pages, LIFO batch:0
HighMem zone: 0 pages, LIFO batch:0
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
Checking aperture...
CPU 0: aperture @ f0000000 size 128 MB
Built 1 zonelists
Kernel command line: root=/dev/sda6 ro rootflags=quota Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 2400.214 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Memory: 962212k/982720k available (2939k kernel code, 20120k reserved,
1327k data, 220k init)
Calibrating delay using timer specific routine.. 4810.51 BogoMIPS
(lpj=9621030)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0(1) -> Node 0 -> Core 0
Using local APIC timer interrupts.
result 12501128
Detected 12.501 MHz APIC timer.
Brought up 1 CPUs
testing NMI watchdog ... OK.
migration_cost=0
DMI 2.3 present.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:13.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
PCI-DMA: Disabling IOMMU.
pnp: 00:06: ioport range 0x290-0x297 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: faf00000-fbffffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:02.0 to 64
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:13.0 to 64
PCI: Setting latency timer of device 0000:00:13.1 to 64
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered
io scheduler anticipatory registered (default)
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie01]
Allocate Port Service[0000:00:02.0:pcie02]
Allocate Port Service[0000:00:02.0:pcie03]
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie01]
Allocate Port Service[0000:00:03.0:pcie02]
Allocate Port Service[0000:00:03.0:pcie03]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 16 throttling states)
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
isa bounce pool size: 16 pages
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
Intel(R) PRO/1000 Network Driver - version 6.3.9-k4
Copyright (c) 1999-2005 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
GSI 18 sharing vector 0xD1 and IRQ 18
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 209
eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 209.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49.
netconsole: device eth0 not up yet, forcing it
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
netconsole: carrier detect appears untrustworthy, waiting 4 seconds
netconsole: network logging started
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
Adaptec aacraid driver (1.1-4 Aug 26 2006 14:27:50)
megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005)
megaraid: 2.20.4.7 (Release Date: Mon Nov 14 12:27:22 EST 2005)
GDT-HA: Storage RAID Controller Driver. Version: 3.04
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
libata version 1.20 loaded.
ahci 0000:00:0f.0: version 1.2
GSI 19 sharing vector 0xD9 and IRQ 19
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217
ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 225
ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 225
ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 225
ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 225
ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:bc01 87:4023
88:40ff
ata1: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : ahci
ata2: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:bc01 87:4023
88:40ff
ata2: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48
ata2: dev 0 configured for UDMA/133
scsi1 : ahci
ata3: no device found (phy stat 00000000)
scsi2 : ahci
ata4: no device found (phy stat 00000000)
scsi3 : ahci
Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 < sda5 sda6 sda7 >
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 < sdb5 sdb6 sdb7 >
sd 1:0:0:0: Attached scsi disk sdb
Fusion MPT base driver 3.03.07
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.07
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.0)
powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6 (1400 mV)
powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8 (1350 mV)
powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa (1300 mV)
powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc (1250 mV)
powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
cpu_init done, current fid 0x10, vid 0x6
XFS mounting filesystem sda6
Ending clean XFS mount for filesystem: sda6
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 220k freed
Adding 1349420k swap on /dev/sda7. Priority:-1 extents:1 across:1349420k
2.) complete dmesg output with 2.6.18.6 (works)
Linux version 2.6.18.3amd (root@neuerserver) (gcc version 3.3.5 (Debian
1:3.3.5-13)) #2 SMP Wed Dec 20 14:26:51 CET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
DMI 2.3 present.
ACPI: RSDP (v002 ACPIAM ) @
0x00000000000fa850
ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @
0x000000003bfb0100
ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @
0x000000003bfb0290
ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @
0x000000003bfb0390
ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @
0x000000003bfb0400
ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @
0x000000003bfbe040
ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @
0x0000000000000000
On node 0 totalpages: 240803
DMA zone: 2521 pages, LIFO batch:0
DMA32 zone: 238282 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
Built 1 zonelists. Total pages: 240803
Kernel command line: nfs root=/dev/nfs
nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp
BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 2400.084 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
CPU 0: aperture @ f0000000 size 128 MB
Memory: 961352k/982720k available (3487k kernel code, 20768k reserved,
1452k data, 228k init)
Calibrating delay using timer specific routine.. 4804.44 BogoMIPS
(lpj=9608882)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
SMP alternatives: switching to UP code
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12500453
Detected 12.500 MHz APIC timer.
Brought up 1 CPUs
testing NMI watchdog ... OK.
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:13.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
PCI-DMA: Disabling IOMMU.
pnp: 00:06: ioport range 0x290-0x297 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: faf00000-fbffffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:02.0 to 64
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:13.0 to 64
PCI: Setting latency timer of device 0000:00:13.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie02]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie02]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 16 throttling states)
ACPI: Getting cpuindex for acpiid 0x2
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
Intel(R) PRO/1000 Network Driver - version 7.1.9-k4
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
GSI 18 sharing vector 0xD1 and IRQ 18
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 209
eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 209.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
Adaptec aacraid driver (1.1-5[2409]-mh2)
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
libata version 2.00 loaded.
ahci 0000:00:0f.0: version 2.0
GSI 19 sharing vector 0xD9 and IRQ 19
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217
ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 225
ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 225
ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 225
ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 225
scsi0 : ahci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32)
ata2.00: ata2: dev 0 multi count 16
ata2.00: configured for UDMA/133
scsi2 : ahci
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 < sda5 sda6 sda7 >
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 < sdb5 sdb6 sdb7 >
sd 1:0:0:0: Attached scsi disk sdb
Fusion MPT base driver 3.04.01
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.01
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors
(version 2.00.00)
powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6
powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8
powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa
powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc
powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
3.) complete output (2.6.19.2) (with acpi does not work)
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 245680) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.3 present.
ACPI: RSDP (v002 ACPIAM ) @
0x00000000000fa850
ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @
0x000000003bfb0100
ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @
0x000000003bfb0290
ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @
0x000000003bfb0390
ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @
0x000000003bfb0400
ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @
0x000000003bfbe040
ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @
0x0000000000000000
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 245680) 1 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 245680
On node 0 totalpages: 245583
DMA zone: 56 pages used for memmap
DMA zone: 1474 pages reserved
DMA zone: 2469 pages, LIFO batch:0
DMA32 zone: 3302 pages used for memmap
DMA32 zone: 238282 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 2, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e4000
Nosave address range: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
PERCPU: Allocating 36352 bytes of per cpu data
Built 1 zonelists. Total pages: 240751
Kernel command line: nfs root=/dev/nfs
nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp
BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
CPU 0: aperture @ f0000000 size 128 MB
Memory: 961140k/982720k available (3530k kernel code, 20980k reserved,
1474k data, 264k init)
Calibrating delay using timer specific routine.. 4804.06 BogoMIPS
(lpj=9608139)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
SMP alternatives: switching to UP code
Freeing SMP alternatives: 32k freed
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12501046
Detected 12.501 MHz APIC timer.
Brought up 1 CPUs
testing NMI watchdog ... OK.
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 2400.198 MHz processor.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:13.1
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
libata version 2.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
PCI: Cannot allocate resource region 0 of device 0000:00:00.0
PCI-DMA: Disabling IOMMU.
pnp: 00:06: ioport range 0x290-0x297 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: faf00000-fbffffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:13.0 to 64
PCI: Setting latency timer of device 0000:00:13.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie02]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie02]
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU1] (supports 16 throttling states)
ACPI: Getting cpuindex for acpiid 0x2
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
Intel(R) PRO/1000 Network Driver - version 7.2.9-k4
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 23.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57.
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
Adaptec aacraid driver (1.1-5[2409]-mh2)
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
ahci 0000:00:0f.0: version 2.0
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21
ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 1277
ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 1277
ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 1277
ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 1277
scsi0 : ahci
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
APIC error on CPU0: 04(08)
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x104)
ata1: port is slow to respond, please be patient (Status 0x80)
ata1: port failed to respond (30 secs, Status 0x80)
ata1: COMRESET failed (device not ready)
ata1: hardreset failed, retrying in 5 secs
ata1: port is slow to respond, please be patient (Status 0x80)
ata1: port failed to respond (30 secs, Status 0x80)
ata1: COMRESET failed (device not ready)
ata1: hardreset failed, retrying in 5 secs
ata1: port is slow to respond, please be patient (Status 0x80)
ata1: port failed to respond (30 secs, Status 0x80)
ata1: COMRESET failed (device not ready)
ata1: reset failed, giving up
scsi1 : ahci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
APIC error on CPU0: 08(08)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
ata2: port is slow to respond, please be patient (Status 0x80)
ata2: port failed to respond (30 secs, Status 0x80)
ata2: COMRESET failed (device not ready)
ata2: hardreset failed, retrying in 5 secs
ata2: port is slow to respond, please be patient (Status 0x80)
ata2: port failed to respond (30 secs, Status 0x80)
ata2: COMRESET failed (device not ready)
ata2: hardreset failed, retrying in 5 secs
ata2: port is slow to respond, please be patient (Status 0x80)
ata2: port failed to respond (30 secs, Status 0x80)
ata2: COMRESET failed (device not ready)
ata2: reset failed, giving up
scsi2 : ahci
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
Fusion MPT base driver 3.04.02
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.02
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors
(version 2.00.00)
powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6
powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8
powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa
powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc
powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Sending DHCP requests ., OK
IP-Config: Got DHCP answer from 85.158.176.245, my address is 85.158.176.246
IP-Config: Complete:
device=eth0, addr=85.158.176.246, mask=255.255.255.0,
gw=85.158.176.1,
host=85.158.176.246, domain=, nis-domain=(none),
bootserver=85.158.176.245, rootserver=85.158.176.245, rootpath=
Looking up port of RPC 100003/2 on 85.158.176.245
Looking up port of RPC 100005/1 on 85.158.176.245
VFS: Mounted root (nfs filesystem) readonly.
Freeing unused kernel memory: 264k freed
4.) complete output (2.6.19.2) (acpi=off does not work)
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable)
BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data)
BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS)
BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 245680) 1 entries of 256 used
end_pfn_map = 1048576
DMI 2.3 present.
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 245680) 1 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 245680
On node 0 totalpages: 245583
DMA zone: 56 pages used for memmap
DMA zone: 1474 pages reserved
DMA zone: 2469 pages, LIFO batch:0
DMA32 zone: 3302 pages used for memmap
DMA32 zone: 238282 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Intel MultiProcessor Specification v1.1
MPTABLE: OEM ID: TEMPLATE MPTABLE: Product ID: MPTABLE: APIC at: 0xFEE00000
Processor #0 (Bootup-CPU)
I/O APIC #1 at 0xFEC00000.
I/O APIC #2 at 0xFECC0000.
Setting APIC routing to flat
Processors: 1
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e4000
Nosave address range: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
PERCPU: Allocating 36352 bytes of per cpu data
Built 1 zonelists. Total pages: 240751
Kernel command line: nfs root=/dev/nfs
nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp acpi=off
BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
CPU 0: aperture @ f0000000 size 128 MB
Memory: 961140k/982720k available (3530k kernel code, 20980k reserved,
1474k data, 264k init)
Calibrating delay using timer specific routine.. 4818.82 BogoMIPS
(lpj=9637645)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
SMP alternatives: switching to UP code
Freeing SMP alternatives: 32k freed
Using local APIC timer interrupts.
result 12500751
Detected 12.500 MHz APIC timer.
Brought up 1 CPUs
testing NMI watchdog ... OK.
time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer.
time.c: Detected 2400.142 MHz processor.
NET: Registered protocol family 16
PCI: Using configuration type 1
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
SCSI subsystem initialized
libata version 2.00 loaded.
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:13.1
PCI: Using IRQ router default [1106/3287] at 0000:00:11.0
PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 27
PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 31
PCI->APIC IRQ transform: 0000:00:0f.0[B] -> IRQ 21
PCI->APIC IRQ transform: 0000:00:10.0[A] -> IRQ 20
PCI->APIC IRQ transform: 0000:00:10.1[C] -> IRQ 22
PCI->APIC IRQ transform: 0000:00:10.2[B] -> IRQ 21
PCI->APIC IRQ transform: 0000:00:10.3[D] -> IRQ 23
PCI->APIC IRQ transform: 0000:00:12.0[A] -> IRQ 23
PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0
PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0
PCI: Cannot allocate resource region 0 of device 0000:00:00.0
PCI-DMA: Disabling IOMMU.
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: faf00000-fbffffff
PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:13.1
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:01.0 to 64
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:00:13.0 to 64
PCI: Setting latency timer of device 0000:00:13.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
SGI XFS with large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie02]
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie02]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
Intel(R) PRO/1000 Network Driver - version 7.2.9-k4
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 23.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57.
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
Adaptec aacraid driver (1.1-5[2409]-mh2)
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
ahci 0000:00:0f.0: version 2.0
ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part
ata1: SATA max UDMA/133 cmd 0xFFFFC20000000D00 ctl 0x0 bmdma 0x0 irq 1277
ata2: SATA max UDMA/133 cmd 0xFFFFC20000000D80 ctl 0x0 bmdma 0x0 irq 1277
ata3: SATA max UDMA/133 cmd 0xFFFFC20000000E00 ctl 0x0 bmdma 0x0 irq 1277
ata4: SATA max UDMA/133 cmd 0xFFFFC20000000E80 ctl 0x0 bmdma 0x0 irq 1277
scsi0 : ahci
ata1: SATA link down (SStatus 601 SControl 300)
scsi1 : ahci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
APIC error on CPU0: 04(08)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)
ata2: port is slow to respond, please be patient (Status 0x80)
ata2: port failed to respond (30 secs, Status 0x80)
ata2: COMRESET failed (device not ready)
ata2: hardreset failed, retrying in 5 secs
ata2: port is slow to respond, please be patient (Status 0x80)
ata2: port failed to respond (30 secs, Status 0x80)
ata2: COMRESET failed (device not ready)
ata2: hardreset failed, retrying in 5 secs
ata2: port is slow to respond, please be patient (Status 0x80)
ata2: port failed to respond (30 secs, Status 0x80)
ata2: COMRESET failed (device not ready)
ata2: reset failed, giving up
scsi2 : ahci
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
Fusion MPT base driver 3.04.02
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.04.02
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors
(version 2.00.00)
powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc
powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa
powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x8
powernow-k8: 4 : fid 0x10 (2400 MHz), vid 0x6
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Sending DHCP requests ., OK
IP-Config: Got DHCP answer from 85.158.176.245, my address is 85.158.176.246
IP-Config: Complete:
device=eth0, addr=85.158.176.246, mask=255.255.255.0,
gw=85.158.176.1,
host=85.158.176.246, domain=, nis-domain=(none),
bootserver=85.158.176.245, rootserver=85.158.176.245, rootpath=
Looking up port of RPC 100003/2 on 85.158.176.245
Looking up port of RPC 100005/1 on 85.158.176.245
VFS: Mounted root (nfs filesystem) readonly.
Freeing unused kernel memory: 264k freed
Stefan
Luming Yu schrieb:
> On 1/26/07, Stephen Evanchik <evanchsa@gmail.com> wrote:
>> On 1/25/07, Luming Yu <luming.yu@gmail.com> wrote:
>> > From the log:
>> > 2.6.18.3:
>> > ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217
>> > 2.6.20-rc5:
>> > "ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21"
>> >
>> > Sounds like acpi interrupt configure problem. Please try acpi=off
>> first.
>>
>>
>> Still does not recognize the SATA device (and the machine fails to
>> come up). I tested this with 2.6.19.2, 2.6.20-rc5 and -rc6 this
>> evening. I am going to build a vanilla 2.6.18 and see if that still
>> works as I am currently running an FC5 kernel.
>>
> Is there any difference in dmesg with acpi=off?
> what is your sata driver?
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: SATA ahci Bug in 2.6.19.x
2007-01-26 5:22 ` Luming Yu
@ 2007-01-26 6:18 ` Stephen Evanchik
2007-01-26 10:33 ` Alan
2007-01-26 9:19 ` Stefan Priebe - FH
1 sibling, 1 reply; 16+ messages in thread
From: Stephen Evanchik @ 2007-01-26 6:18 UTC (permalink / raw)
To: Luming Yu; +Cc: Stefan Priebe - FH, linux-kernel
On 1/26/07, Luming Yu <luming.yu@gmail.com> wrote:
> >
> Is there any difference in dmesg with acpi=off?
> what is your sata driver?
The only difference is that I don't see the "ACPI: PCI Interrupt
0000:00:0f.0[B] -> GSI
21 (level, low) -> IRQ 19" printk. The driver is AHCI but the device
is a VIA chip.
I'll get a caputre of the boot log when I find my serial cable. This
could be related to the VIA PIC quirks that was changed by Alan.
Stephen
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: SATA ahci Bug in 2.6.19.x
2007-01-26 4:46 ` Stephen Evanchik
@ 2007-01-26 5:22 ` Luming Yu
2007-01-26 6:18 ` Stephen Evanchik
2007-01-26 9:19 ` Stefan Priebe - FH
0 siblings, 2 replies; 16+ messages in thread
From: Luming Yu @ 2007-01-26 5:22 UTC (permalink / raw)
To: Stephen Evanchik; +Cc: Stefan Priebe - FH, linux-kernel
On 1/26/07, Stephen Evanchik <evanchsa@gmail.com> wrote:
> On 1/25/07, Luming Yu <luming.yu@gmail.com> wrote:
> > From the log:
> > 2.6.18.3:
> > ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217
> > 2.6.20-rc5:
> > "ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21"
> >
> > Sounds like acpi interrupt configure problem. Please try acpi=off first.
>
>
> Still does not recognize the SATA device (and the machine fails to
> come up). I tested this with 2.6.19.2, 2.6.20-rc5 and -rc6 this
> evening. I am going to build a vanilla 2.6.18 and see if that still
> works as I am currently running an FC5 kernel.
>
Is there any difference in dmesg with acpi=off?
what is your sata driver?
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: SATA ahci Bug in 2.6.19.x
2007-01-26 3:25 ` Luming Yu
@ 2007-01-26 4:46 ` Stephen Evanchik
2007-01-26 5:22 ` Luming Yu
0 siblings, 1 reply; 16+ messages in thread
From: Stephen Evanchik @ 2007-01-26 4:46 UTC (permalink / raw)
To: Luming Yu; +Cc: Stefan Priebe - FH, linux-kernel
On 1/25/07, Luming Yu <luming.yu@gmail.com> wrote:
> From the log:
> 2.6.18.3:
> ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217
> 2.6.20-rc5:
> "ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21"
>
> Sounds like acpi interrupt configure problem. Please try acpi=off first.
Still does not recognize the SATA device (and the machine fails to
come up). I tested this with 2.6.19.2, 2.6.20-rc5 and -rc6 this
evening. I am going to build a vanilla 2.6.18 and see if that still
works as I am currently running an FC5 kernel.
Stephen
--
Stephen Evanchik
http://stephen.evanchik.com
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: SATA ahci Bug in 2.6.19.x
2007-01-22 14:00 ` Stephen Evanchik
2007-01-25 21:24 ` Stefan Priebe - FH
@ 2007-01-26 3:25 ` Luming Yu
2007-01-26 4:46 ` Stephen Evanchik
1 sibling, 1 reply; 16+ messages in thread
From: Luming Yu @ 2007-01-26 3:25 UTC (permalink / raw)
To: Stephen Evanchik; +Cc: Stefan Priebe - FH, linux-kernel
>From the log:
2.6.18.3:
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217
2.6.20-rc5:
"ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21"
Sounds like acpi interrupt configure problem. Please try acpi=off first.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: SATA ahci Bug in 2.6.19.x
2007-01-22 14:00 ` Stephen Evanchik
@ 2007-01-25 21:24 ` Stefan Priebe - FH
2007-01-26 3:25 ` Luming Yu
1 sibling, 0 replies; 16+ messages in thread
From: Stefan Priebe - FH @ 2007-01-25 21:24 UTC (permalink / raw)
To: Stephen Evanchik; +Cc: linux-kernel
Hello....
Nobody here who cares???
Stefan
Stephen Evanchik schrieb:
> On 1/22/07, Stefan Priebe - FH <studium@profihost.com> wrote:
>
>> I've an Asus A8V Mainboard which works wonderful with a 2.6.18.X kernel.
>> But i cannot use the SATA Controller with a 2.6.19.x Kernel.
>
>
> I also have an Asus A8V motherboard that cannot boot a newer kernel
> because the SATA controller does not come up properly. I have tried
> kernels 2.6.19.2 and 2.6.20-rc5 with no luck. It looks like later
> kernels don't recognize the proper IRQ of the device as compared to
> the 2.6.18 boot logs.
>
>> "ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21"
>> "ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE
>> mode"
>> "ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part "
>> "ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq
>> 1277"
>> "ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq
>> 1277"
>> "ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq
>> 1277"
>> "ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq
>> 1277"
>
>
> Similar output as above.
>
>
> Does any one have any ideas?
>
>
> Stephen
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: SATA ahci Bug in 2.6.19.x
2007-01-22 8:02 Stefan Priebe - FH
@ 2007-01-22 14:00 ` Stephen Evanchik
2007-01-25 21:24 ` Stefan Priebe - FH
2007-01-26 3:25 ` Luming Yu
0 siblings, 2 replies; 16+ messages in thread
From: Stephen Evanchik @ 2007-01-22 14:00 UTC (permalink / raw)
To: Stefan Priebe - FH; +Cc: linux-kernel
On 1/22/07, Stefan Priebe - FH <studium@profihost.com> wrote:
> I've an Asus A8V Mainboard which works wonderful with a 2.6.18.X kernel.
> But i cannot use the SATA Controller with a 2.6.19.x Kernel.
I also have an Asus A8V motherboard that cannot boot a newer kernel
because the SATA controller does not come up properly. I have tried
kernels 2.6.19.2 and 2.6.20-rc5 with no luck. It looks like later
kernels don't recognize the proper IRQ of the device as compared to
the 2.6.18 boot logs.
> "ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21"
> "ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE
> mode"
> "ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part "
> "ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 1277"
> "ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 1277"
> "ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 1277"
> "ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 1277"
Similar output as above.
Does any one have any ideas?
Stephen
^ permalink raw reply [flat|nested] 16+ messages in thread
* SATA ahci Bug in 2.6.19.x
@ 2007-01-22 8:02 Stefan Priebe - FH
2007-01-22 14:00 ` Stephen Evanchik
0 siblings, 1 reply; 16+ messages in thread
From: Stefan Priebe - FH @ 2007-01-22 8:02 UTC (permalink / raw)
To: linux-kernel
Hello!
I've an Asus A8V Mainboard which works wonderful with a 2.6.18.X kernel.
But i cannot use the SATA Controller with a 2.6.19.x Kernel.
dmesg output from 2.6.18.3 where it works perfectly:
libata version 2.00 loaded.
ahci 0000:00:0f.0: version 2.0
GSI 19 sharing vector 0xD9 and IRQ 19
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI
21 (level, low) -> IRQ 217
ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4
ports 3 Gbps 0xf impl IDE mode
ahci 0000:00:0f.0: flags: 64bit ncq pm led
clo pmp pio slum part
ata1: SATA max UDMA/133 cmd
0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 225
ata2: SATA max UDMA/133 cmd
0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 225
ata3: SATA max UDMA/133 cmd
0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 225
ata4: SATA max UDMA/133 cmd
0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 225
scsi0 : ahci
ata1: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
ata1.00: ATA-7, max UDMA7, 312581808
sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : ahci
ata2: SATA link up 3.0 Gbps (SStatus 123
SControl 300)
ata2.00: ATA-7, max UDMA7, 312581808
sectors: LBA48 NCQ (depth 0/32)
ata2.00: ata2: dev 0 multi count 16
ata2.00: configured for UDMA/133
scsi2 : ahci
ata3: SATA link down (SStatus 0 SControl 300)
scsi3 : ahci
ata4: SATA link down (SStatus 0 SControl 300)
Vendor: ATA Model: SAMSUNG HD160JJ
Rev: ZM10
Type: Direct-Access
ANSI SCSI revision: 05
Vendor: ATA Model: SAMSUNG HD160JJ
Rev: ZM10
Type: Direct-Access
ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr
sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr
sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 < sda5 sda6 sda7 >
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 312581808 512-byte hdwr
sectors (160042 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 312581808 512-byte hdwr
sectors (160042 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 < sdb5 sdb6 sdb7 >
sd 1:0:0:0: Attached scsi disk sdb
Output with 2.6.19.2 (logged via netconsole cause the system can't boot):
"ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21"
"ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE
mode"
"ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part "
"ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 1277"
"ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 1277"
"ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 1277"
"ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 1277"
"scsi0 : ahci"
"ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)"
"ata1.00: qc timeout (cmd 0xec)"
"ata1.00: failed to IDENTIFY (I/O error, err_mask=0x104)"
"ata1: port is slow to respond, please be patient (Status 0x80)"
"ata1: port failed to respond (30 secs, Status 0x80)"
"ata1: COMRESET failed (device not ready)"
"ata1: hardreset failed, retrying in 5 secs"
"ata1: port is slow to respond, please be patient (Status 0x80)"
"ata1: port failed to respond (30 secs, Status 0x80)"
"ata1: COMRESET failed (device not ready)"
"ata1: hardreset failed, retrying in 5 secs"
"ata1: port is slow to respond, please be patient (Status 0x80)"
"ata1: port failed to respond (30 secs, Status 0x80)"
"ata1: COMRESET failed (device not ready)"
"ata1: reset failed, giving up"
"scsi1 : ahci"
"ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)"
"ata2.00: qc timeout (cmd 0xec)"
"ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104)"
"ata2: port is slow to respond, please be patient (Status 0x80)"
"ata2: port failed to respond (30 secs, Status 0x80)"
"ata2: COMRESET failed (device not ready)"
"ata2: hardreset failed, retrying in 5 secs"
"ata2: port is slow to respond, please be patient (Status 0x80)"
"ata2: port failed to respond (30 secs, Status 0x80)"
"ata2: COMRESET failed (device not ready)"
"ata2: hardreset failed, retrying in 5 secs"
"ata2: port is slow to respond, please be patient (Status 0x80)"
"ata2: port failed to respond (30 secs, Status 0x80)"
"ata2: COMRESET failed (device not ready)"
"ata2: reset failed, giving up"
"scsi2 : ahci"
"ata3: SATA link down (SStatus 0 SControl 300)"
"scsi3 : ahci"
"ata4: SATA link down (SStatus 0 SControl 300)"
Stefan
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2007-02-26 8:32 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <7G2pJ-2iX-23@gated-at.bofh.it>
[not found] ` <7G828-3zn-3@gated-at.bofh.it>
[not found] ` <7HpWX-3D2-5@gated-at.bofh.it>
[not found] ` <7Hrci-5ou-5@gated-at.bofh.it>
[not found] ` <7HrP4-6t8-1@gated-at.bofh.it>
[not found] ` <7Hvzs-3Tj-23@gated-at.bofh.it>
[not found] ` <7IYJ1-281-27@gated-at.bofh.it>
2007-02-14 8:57 ` SATA ahci Bug in 2.6.19.x Manuel Metz
2007-02-21 11:55 ` Tejun Heo
2007-02-21 16:46 ` Manuel Metz
2007-02-24 6:25 ` Tejun Heo
2007-02-24 7:55 ` Jeff Garzik
2007-02-26 8:32 ` Manuel Metz
2007-01-22 8:02 Stefan Priebe - FH
2007-01-22 14:00 ` Stephen Evanchik
2007-01-25 21:24 ` Stefan Priebe - FH
2007-01-26 3:25 ` Luming Yu
2007-01-26 4:46 ` Stephen Evanchik
2007-01-26 5:22 ` Luming Yu
2007-01-26 6:18 ` Stephen Evanchik
2007-01-26 10:33 ` Alan
2007-01-26 9:19 ` Stefan Priebe - FH
2007-01-30 10:44 ` Stefan Priebe - FH
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.