All of lore.kernel.org
 help / color / mirror / Atom feed
From: Udo van den Heuvel <udovdh@xs4all.nl>
To: linux-kernel@vger.kernel.org
Cc: Alistair John Strachan <s0348365@sms.ed.ac.uk>,
	Krzysztof Halasa <khc@pm.waw.pl>,
	Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Subject: Re: PCI riser cards and PCI irq routing, etc
Date: Tue, 20 Feb 2007 16:44:15 +0100	[thread overview]
Message-ID: <45DB174F.30708@xs4all.nl> (raw)
In-Reply-To: <200702201456.30794.s0348365@sms.ed.ac.uk>

Alistair John Strachan wrote:
> On Tuesday 20 February 2007 04:17, Udo van den Heuvel wrote:
>> Krzysztof Halasa wrote:
>>> Is it a VIA ITX board? I think I have VIA's riser card somewhere,
>>> could check what it does.
>> Yes, VIA Epia EN12000.
>> Interesting to check the riser card.
> 
> Just be aware that there are two types of PCI riser -- risers that work in any 
> board, and Via Epia-specific risers. The latter requires a BIOS update on 
> some Epias and presumably has some advantages, possible the ones you're 
> looking for.

This card is sold by TranquilPC for their T2e case which holds Mini-ITX
boards. My EN12000 has the latest BIOS I could find on the VIA site:
http://www.via.com.tw/en/products/mainboards/downloads.jsp?motherboard_id=399#BIOS


I just tested with Device Number 12 and DN 18 (the only free locations
to try besides the DN 19 default, if I am correct on this).

DN 12 gave me this:

00:0c.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
        Subsystem: TERRATEC Electronic GmbH Unknown device 1157
        Flags: medium devsel, IRQ 255
        Memory at fdfff000 (32-bit, non-prefetchable) [size=512]


No irq! The other card remained at DN20 and irq 20.
So no visible i2c at all (!) for the DVB-T card.

DN 18 gave me:

00:12.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
        Subsystem: TERRATEC Electronic GmbH Unknown device 1157
        Flags: bus master, medium devsel, latency 32, IRQ 20
        Memory at fdffc000 (32-bit, non-prefetchable) [size=512]

00:14.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
        Subsystem: TERRATEC Electronic GmbH Unknown device 1155
        Flags: bus master, medium devsel, latency 32, IRQ 21
        Memory at fdffb000 (32-bit, non-prefetchable) [size=512]

The DVB-T card had the same problems as with DN19 in irq mode. Visible
i2c bus but not usable i2c.

Any ideas about how to proceed?
What to test?


BTW:

Another case I am considering has this drawing for the riser:
http://www.morex.com.tw/drawing/MAR122-J%20Drawing.pdf
DN ranges from 20 to 31. Would this improve the situation?

Kind regards,
Udo

  reply	other threads:[~2007-02-20 15:44 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-18 14:07 PCI riser cards and PCI irq routing, etc Udo van den Heuvel
2007-02-18 15:54 ` Lennart Sorensen
2007-02-18 16:15   ` Udo van den Heuvel
2007-02-18 19:39     ` Lennart Sorensen
2007-02-19  1:50       ` Alistair John Strachan
2007-02-19  4:04       ` Udo van den Heuvel
2007-02-19 15:17         ` Lennart Sorensen
2007-02-19 15:43           ` Udo van den Heuvel
2007-02-19 17:13             ` Lennart Sorensen
2007-02-19 15:09       ` Udo van den Heuvel
2007-02-19 20:37         ` Krzysztof Halasa
2007-02-20  4:17           ` Udo van den Heuvel
2007-02-20 14:56             ` Alistair John Strachan
2007-02-20 15:44               ` Udo van den Heuvel [this message]
2007-02-20 19:51                 ` Alistair John Strachan
2007-02-21  9:24                 ` Udo van den Heuvel
2007-02-21 12:24                   ` Krzysztof Halasa
2007-02-21 14:59                     ` Udo van den Heuvel
2007-02-21 15:12                       ` Lennart Sorensen
     [not found]                         ` <m3hctfqjna.fsf@maximus.localdomain>
2007-02-21 22:40                           ` Lennart Sorensen
2007-02-21 23:55                             ` Alistair John Strachan
2007-02-22  1:19                               ` Krzysztof Halasa
2007-02-23 15:45                                 ` Udo van den Heuvel
2007-02-23 15:54                                   ` Lennart Sorensen
2007-02-23 17:55                                   ` Krzysztof Halasa
2007-02-23 18:17                                     ` Udo van den Heuvel
2007-02-23 19:42                                       ` Krzysztof Halasa
2007-03-03 14:35                                         ` Udo van den Heuvel
2007-02-23 18:12                                   ` Krzysztof Halasa
2007-02-23 18:44                                     ` Udo van den Heuvel
2007-02-23 20:00                                       ` Krzysztof Halasa
2007-02-25 15:59                                     ` Udo van den Heuvel
2007-02-22  1:16                             ` Krzysztof Halasa
2007-02-21 18:11                       ` Udo van den Heuvel
2007-02-21 19:54                         ` Krzysztof Halasa
2007-02-21 20:13                         ` Lennart Sorensen
2007-02-21 19:36                       ` Krzysztof Halasa
2007-02-21 13:44                   ` Lennart Sorensen
2007-02-21 18:55                     ` Udo van den Heuvel
2007-02-20 20:47             ` Krzysztof Halasa
2007-02-20 21:51               ` Lennart Sorensen
2007-02-21  0:11                 ` Krzysztof Halasa
2007-02-21 13:46                   ` Lennart Sorensen
2007-02-20  4:35           ` Udo van den Heuvel
2007-02-21  0:03             ` Krzysztof Halasa
2007-02-18 20:50     ` Krzysztof Halasa
2007-02-18 20:42   ` Krzysztof Halasa
2007-02-19 15:03     ` Lennart Sorensen
2007-02-19 18:23       ` Krzysztof Halasa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=45DB174F.30708@xs4all.nl \
    --to=udovdh@xs4all.nl \
    --cc=khc@pm.waw.pl \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lsorense@csclub.uwaterloo.ca \
    --cc=s0348365@sms.ed.ac.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.