[PATCH 1/3] dt-bindings: crypto: Mention clocks for mxs-dcp

[Leonard Crestez <leonard.crestez@nxp.com>]

Explicit clock enabling is required on 6sll and 6ull so mention that
standard clock bindings are used.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
---
 Documentation/devicetree/bindings/crypto/fsl-dcp.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
index 76a0b4e80e83..4e4d387e38a5 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-dcp.txt
@@ -4,10 +4,12 @@ Required properties:
 - compatible : Should be "fsl,<soc>-dcp"
 - reg : Should contain MXS DCP registers location and length
 - interrupts : Should contain MXS DCP interrupt numbers, VMI IRQ and DCP IRQ
                must be supplied, optionally Secure IRQ can be present, but
 	       is currently not implemented and not used.
+- clocks : Clock reference (only required on some SOCs: 6ull and 6sll).
+- clock-names : Must be "dcp".
 
 Example:
 
 dcp@80028000 {
 	compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
-- 
2.17.1