From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.2 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH,MAILING_LIST_MULTI,SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS, USER_AGENT_SANE_1 autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id C6A58C4724C for ; Fri, 8 May 2020 15:45:43 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id AFE6021841 for ; Fri, 8 May 2020 15:45:43 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728219AbgEHPpn (ORCPT ); Fri, 8 May 2020 11:45:43 -0400 Received: from mail-lj1-f195.google.com ([209.85.208.195]:34832 "EHLO mail-lj1-f195.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727082AbgEHPpm (ORCPT ); Fri, 8 May 2020 11:45:42 -0400 Received: by mail-lj1-f195.google.com with SMTP id g4so2172618ljl.2; Fri, 08 May 2020 08:45:38 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to:user-agent; bh=N9gYLaHYZJKZckAryntApHd1C+vXPx8xLJKhLTIvXSY=; b=Dkihip5gLtQi6wr7fAekMFRzge0DOGLBG43nLxsmYvldhLDvhH6RQFTGlhwGGFVjGW sPI7kU71X7pdddsmXN1ewZU3Mg2+YzWsekafFxXJd8bsDhSSoZr/xNbVqZkCYv5LUXKq tk+nzZ3Y8P75vJwYEmH9VA7CzGl69lBnMrn8mE30Ds2DijZ/ej/C0mFfMTZ9Sy+ZxOGG YB236yrvMtAAFiqv+HLo74GgibwQdexrxGNfiuSX/6FosHj1Uo3LjEka4qVxAI7myH1Y 8Hgy0LdlZcAO+QiUTsKZbvTNiJEu6P/YdIuke98XdSzVW9cgo/A3EB2GS/cGLBNz5FMs Dkug== X-Gm-Message-State: AOAM531tQTD5MKWh34Fkg89MmQvD8A/YsqKQATet7CNJ5eueBpvafDRU 9aLLbqv7tyoDbw0UN+CsAdM= X-Google-Smtp-Source: ABdhPJz/TSluaqTPI9YgOwnoCghL3uo5gIoWekqagbcmMpPFY606cgReVrBBAtGztw5sRu4x8VSaMw== X-Received: by 2002:a05:651c:1121:: with SMTP id e1mr2111226ljo.205.1588952737591; Fri, 08 May 2020 08:45:37 -0700 (PDT) Received: from localhost.localdomain (62-78-225-252.bb.dnainternet.fi. [62.78.225.252]) by smtp.gmail.com with ESMTPSA id m6sm1632978ljp.32.2020.05.08.08.45.36 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 08 May 2020 08:45:37 -0700 (PDT) Date: Fri, 8 May 2020 18:44:45 +0300 From: Matti Vaittinen To: matti.vaittinen@fi.rohmeurope.com, mazziesaccount@gmail.com Cc: lgirdwood@gmail.com, broonie@kernel.org, sre@kernel.org, brendanhiggins@google.com, linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v12 05/11] power: supply: bd70528: use linear ranges Message-ID: <46fa0d17ac06aeda054d2080fb39693c6eabfea6.1588944082.git.matti.vaittinen@fi.rohmeurope.com> References: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: User-Agent: Mutt/1.12.1 (2019-06-15) Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Change the bd70528 to use common linear_range code instead of implementing a copy of it in this driver. Signed-off-by: Matti Vaittinen Reviewed-by: Sebastian Reichel --- drivers/power/supply/Kconfig | 1 + drivers/power/supply/bd70528-charger.c | 144 ++++++++++--------------- 2 files changed, 56 insertions(+), 89 deletions(-) diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index f3424fdce341..9f19636db922 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -695,6 +695,7 @@ config CHARGER_UCS1002 config CHARGER_BD70528 tristate "ROHM bd70528 charger driver" depends on MFD_ROHM_BD70528 + select LINEAR_RANGES default n help Say Y here to enable support for getting battery status diff --git a/drivers/power/supply/bd70528-charger.c b/drivers/power/supply/bd70528-charger.c index 3b820110ecfa..7c1f0b99c71b 100644 --- a/drivers/power/supply/bd70528-charger.c +++ b/drivers/power/supply/bd70528-charger.c @@ -72,6 +72,7 @@ #include #include #include +#include #define CHG_STAT_SUSPEND 0x0 #define CHG_STAT_TRICKLE 0x1 @@ -335,38 +336,37 @@ static int bd70528_get_present(struct bd70528_psy *bdpsy, int *val) return 0; } -struct bd70528_linear_range { - int min; - int step; - int vals; - int low_sel; -}; - -static const struct bd70528_linear_range current_limit_ranges[] = { +static const struct linear_range current_limit_ranges[] = { { .min = 5, .step = 1, - .vals = 36, - .low_sel = 0, + .min_sel = 0, + .max_sel = 0x22, }, { .min = 40, .step = 5, - .vals = 5, - .low_sel = 0x23, + .min_sel = 0x23, + .max_sel = 0x26, }, { .min = 60, .step = 20, - .vals = 8, - .low_sel = 0x27, + .min_sel = 0x27, + .max_sel = 0x2d, }, { .min = 200, .step = 50, - .vals = 7, - .low_sel = 0x2e, - } + .min_sel = 0x2e, + .max_sel = 0x34, + }, + { + .min = 500, + .step = 0, + .min_sel = 0x35, + .max_sel = 0x3f, + }, }; /* @@ -374,18 +374,18 @@ static const struct bd70528_linear_range current_limit_ranges[] = { * voltage for low temperatures. The driver currently only reads * the charge current at room temperature. We do set both though. */ -static const struct bd70528_linear_range warm_charge_curr[] = { +static const struct linear_range warm_charge_curr[] = { { .min = 10, .step = 10, - .vals = 20, - .low_sel = 0, + .min_sel = 0, + .max_sel = 0x12, }, { .min = 200, .step = 25, - .vals = 13, - .low_sel = 0x13, + .min_sel = 0x13, + .max_sel = 0x1f, }, }; @@ -398,56 +398,6 @@ static const struct bd70528_linear_range warm_charge_curr[] = { #define MAX_WARM_CHG_CURR_SEL 0x1f #define MIN_CHG_CURR_SEL 0x0 -static int find_value_for_selector_low(const struct bd70528_linear_range *r, - int selectors, unsigned int sel, - unsigned int *val) -{ - int i; - - for (i = 0; i < selectors; i++) { - if (r[i].low_sel <= sel && r[i].low_sel + r[i].vals >= sel) { - *val = r[i].min + (sel - r[i].low_sel) * r[i].step; - return 0; - } - } - return -EINVAL; -} - -/* - * For BD70528 voltage/current limits we happily accept any value which - * belongs the range. We could check if value matching the selector is - * desired by computing the range min + (sel - sel_low) * range step - but - * I guess it is enough if we use voltage/current which is closest (below) - * the requested? - */ -static int find_selector_for_value_low(const struct bd70528_linear_range *r, - int selectors, unsigned int val, - unsigned int *sel, bool *found) -{ - int i; - int ret = -EINVAL; - - *found = false; - for (i = 0; i < selectors; i++) { - if (r[i].min <= val) { - if (r[i].min + r[i].step * r[i].vals >= val) { - *found = true; - *sel = r[i].low_sel + (val - r[i].min) / - r[i].step; - ret = 0; - break; - } - /* - * If the range max is smaller than requested - * we can set the max supported value from range - */ - *sel = r[i].low_sel + r[i].vals; - ret = 0; - } - } - return ret; -} - static int get_charge_current(struct bd70528_psy *bdpsy, int *ma) { unsigned int sel; @@ -463,9 +413,9 @@ static int get_charge_current(struct bd70528_psy *bdpsy, int *ma) sel &= BD70528_MASK_CHG_CHG_CURR; - ret = find_value_for_selector_low(&warm_charge_curr[0], - ARRAY_SIZE(warm_charge_curr), sel, - ma); + ret = linear_range_get_value_array(&warm_charge_curr[0], + ARRAY_SIZE(warm_charge_curr), + sel, ma); if (ret) { dev_err(bdpsy->dev, "Unknown charge current value 0x%x\n", @@ -491,10 +441,9 @@ static int get_current_limit(struct bd70528_psy *bdpsy, int *ma) sel &= BD70528_MASK_CHG_DCIN_ILIM; - ret = find_value_for_selector_low(¤t_limit_ranges[0], - ARRAY_SIZE(current_limit_ranges), sel, - ma); - + ret = linear_range_get_value_array(¤t_limit_ranges[0], + ARRAY_SIZE(current_limit_ranges), + sel, ma); if (ret) { /* Unspecified values mean 500 mA */ *ma = 500; @@ -588,15 +537,28 @@ static int set_charge_current(struct bd70528_psy *bdpsy, int ma) goto set; } - ret = find_selector_for_value_low(&warm_charge_curr[0], - ARRAY_SIZE(warm_charge_curr), ma, - ®, &found); +/* + * For BD70528 voltage/current limits we happily accept any value which + * belongs the range. We could check if value matching the selector is + * desired by computing the range min + (sel - sel_low) * range step - but + * I guess it is enough if we use voltage/current which is closest (below) + * the requested? + */ + + ret = linear_range_get_selector_low_array(warm_charge_curr, + ARRAY_SIZE(warm_charge_curr), + ma, ®, &found); if (ret) { + dev_err(bdpsy->dev, + "Unsupported charge current %u mA\n", ma); reg = MIN_CHG_CURR_SEL; goto set; } if (!found) { - /* There was a gap in supported values and we hit it */ + /* + * There was a gap in supported values and we hit it. + * Yet a smaller value was found so we use it. + */ dev_warn(bdpsy->dev, "Unsupported charge current %u mA\n", ma); } @@ -648,17 +610,21 @@ static int set_current_limit(struct bd70528_psy *bdpsy, int ma) goto set; } - ret = find_selector_for_value_low(¤t_limit_ranges[0], - ARRAY_SIZE(current_limit_ranges), ma, - ®, &found); + ret = linear_range_get_selector_low_array(current_limit_ranges, + ARRAY_SIZE(current_limit_ranges), + ma, ®, &found); if (ret) { + dev_err(bdpsy->dev, "Unsupported current limit %umA\n", ma); reg = MIN_CURR_LIMIT_SEL; goto set; } if (!found) { - /* There was a gap in supported values and we hit it ?*/ - dev_warn(bdpsy->dev, "Unsupported current limit %umA\n", - ma); + /* + * There was a gap in supported values and we hit it. + * We found a smaller value from ranges and use it. + * Warn user though. + */ + dev_warn(bdpsy->dev, "Unsupported current limit %umA\n", ma); } set: -- 2.21.0 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =]