All of lore.kernel.org
 help / color / mirror / Atom feed
From: gengdongjiu <gengdongjiu@huawei.com>
To: <mst@redhat.com>, Igor Mammedov <imammedo@redhat.com>,
	"peter.maydell@linaro.org" <peter.maydell@linaro.org>,
	<zhaoshenglong@huawei.com>, James Morse <james.morse@arm.com>,
	<lersek@redhat.com>, Marc Zyngier <marc.zyngier@arm.com>,
	<christoffer.dall@linaro.org>, <rth@twiddle.net>,
	<ehabkost@redhat.com>, <qemu-devel@nongnu.org>,
	<qemu-arm@nongnu.org>, <rth@twiddle.net>, <ehabkost@redhat.com>,
	"kvm@vger.kernel.org" <kvm@vger.kernel.org>,
	<pbonzini@redhat.com>
Subject: Re: [PATCH v13 00/12] Add ARMv8 RAS virtualization support in QEMU
Date: Mon, 4 Dec 2017 20:15:56 +0800	[thread overview]
Message-ID: <470c9df5-f2e8-974b-b37f-eff84a6f3d71@huawei.com> (raw)
In-Reply-To: <1511807966-23936-1-git-send-email-gengdongjiu@huawei.com>

ping again.

thanks


On 2017/11/28 2:39, Dongjiu Geng wrote:
> From: gengdongjiu <gengdongjiu@huawei.com>
> 
> In the ARMv8 platform, the CPU error type are synchronous external
> abort(SEA) and SError Interrupt (SEI). If guest happen exception, 
> sometimes  guest itself do the recovery is better, because host 
> does not know guest's detailed info. For example, if a guest
> user-space application happen exception, guest can kill this 
> application, but host can not do that.
> 
> For the ARMv8 SEA/SEI, KVM or host kernel will deliver SIGBUS or
> use other interface to notify user space. After user space gets 
> the notification, it will record the CPER to guest GHES buffer
> for guest and inject a exception or IRQ to KVM.
> 
> In the current implement, if the SIGBUS is BUS_MCEERR_AR, we will
> treat it as synchronous exception, and use ARMv8 SEA notification type
> to notify guest after recording CPER for guest; If the SIGBUS is
> BUS_MCEERR_AO, we will treat it as asynchronous exception, and use
> GPIO-Signal to notify guest after recording CPER for guest.
> 
> If KVM wants userspace to do the recovery for the SError, it will return a error
> status to Qemu. Then Qemu will specify the guest ESR value and inject a virtual
> SError.
> 
> This series patches have three parts:
> 1. Generate APEI/GHES table and record CPER for guest in runtime.
> 2. Handle the SIGBUS signal, record the CPER and fill into guest memory,
>    then according to SIGBUS type(BUS_MCEERR_AR or BUS_MCEERR_AO), using
>    different ACPI notification type to notify guest.
> 3. Specify guest SError ESR value and inject a virtual SError 
> 
> Whole solution was suggested by James(james.morse@arm.com); inject RAS SEA abort and specify guest ESR
> in user space are suggested by Marc(marc.zyngier@arm.com), APEI part solution is suggested by
> Laszlo(lersek@redhat.com). Shown some discussion in [1].
> 
> 
> This series patches have already tested on ARM64 platform with RAS feature enabled:
> Show the APEI part verification result in [2]
> Show the BUS_MCEERR_AR and BUS_MCEERR_AO SIGBUS handling verification result in [3]
> Show Qemu set guest ESR and inject virtual SError verification result in [4]
> 
> ---
> Change since v12:
> 1. Address Paolo's comments to move HWPoisonPage definition to accel/kvm/kvm-all.c
> 2. Only call kvm_cpu_synchronize_state() when get the BUS_MCEERR_AR signal
> 3. Only add and enable GPIO-Signal and ARMv8 SEA two hardware error sources
> 4. Address Michael's comments to not sync SPDX from Linux kernel header file 
> 
> Change since v11:
> Address James's comments(james.morse@arm.com)
> 1. Check whether KVM has the capability to to set ESR instead of detecting host CPU RAS capability
> 2. For SIGBUS_MCEERR_AR SIGBUS, use Synchronous-External-Abort(SEA) notification type
>    for SIGBUS_MCEERR_AO SIGBUS, use GPIO-Signal notification
> 
> 
> Address Shannon's comments(for ACPI part):
> 1. Unify hest_ghes.c and hest_ghes.h license declaration
> 2. Remove unnecessary including "qmp-commands.h" in hest_ghes.c
> 3. Unconditionally add guest APEI table based on James's comments(james.morse@arm.com) 
> 4. Add a option to virt machine for migration compatibility. On new virt machine it's on
>    by default while off for old ones, we enabled it since 2.10
> 5. Refer to the ACPI spec version which introduces Hardware Error Notification first time
> 6. Add ACPI_HEST_NOTIFY_RESERVED notification type
> 
> Address Igor's comments(for ACPI part):
> 1. Add doc patch first which will describe how it's supposed to work between QEMU/firmware/guest
>    OS with expected flows.
> 2. Move APEI diagrams into doc/spec patch
> 3. Remove redundant g_malloc in ghes_record_cper()
> 4. Use build_append_int_noprefix() API to compose whole error status block and whole APEI table, 
>    and try to get rid of most structures in patch 1, as they will be left unused after that
> 5. Reuse something like https://github.com/imammedo/qemu/commit/3d2fd6d13a3ea298d2ee814835495ce6241d085c
>    to build GAS
> 6. Remove much offsetof() in the function
> 7. Build independent tables first and only then build dependent tables passing to it pointers
>    to previously build table if necessary.
> 8. Redefine macro GHES_ACPI_HEST_NOTIFY_RESERVED to ACPI_HEST_ERROR_SOURCE_COUNT to avoid confusion
> 
> 
> Address Peter Maydell's comments
> 1. linux-headers is done as a patch of their own created using scripts/update-linux-headers.sh run against a
>    mainline kernel tree 
> 2. Tested whether this patchset builds OK on aarch32  
> 3. Abstract Hwpoison page adding code  out properly into a cpu-independent source file from target/i386/kvm.c,
>    such as kvm-all.c
> 4. Add doc-comment formatted documentation comment for new globally-visible function prototype in a header
> 
> ---
> [1]:
> https://lkml.org/lkml/2017/2/27/246
> https://patchwork.kernel.org/patch/9633105/
> https://patchwork.kernel.org/patch/9925227/
> 
> [2]:
> Note: the UEFI(QEMU_EFI.fd) is needed if guest want to use ACPI table.
> 
> After guest boot up, dump the APEI table, then can see the initialized table
> (1) # iasl -p ./HEST -d /sys/firmware/acpi/tables/HEST
> (2) # cat HEST.dsl
>     /*
>      * Intel ACPI Component Architecture
>      * AML/ASL+ Disassembler version 20170728 (64-bit version)
>      * Copyright (c) 2000 - 2017 Intel Corporation
>      *
>      * Disassembly of /sys/firmware/acpi/tables/HEST, Mon Sep  5 07:59:17 2016
>      *
>      * ACPI Data Table [HEST]
>      *
>      * Format: [HexOffset DecimalOffset ByteLength]  FieldName : FieldValue
>      */
> 
>     ..................................................................................
>     [308h 0776   2]                Subtable Type : 000A [Generic Hardware Error Source V2]
>     [30Ah 0778   2]                    Source Id : 0008
>     [30Ch 0780   2]            Related Source Id : FFFF
>     [30Eh 0782   1]                     Reserved : 00
>     [30Fh 0783   1]                      Enabled : 01
>     [310h 0784   4]       Records To Preallocate : 00000001
>     [314h 0788   4]      Max Sections Per Record : 00000001
>     [318h 0792   4]          Max Raw Data Length : 00001000
> 
>     [31Ch 0796  12]         Error Status Address : [Generic Address Structure]
>     [31Ch 0796   1]                     Space ID : 00 [SystemMemory]
>     [31Dh 0797   1]                    Bit Width : 40
>     [31Eh 0798   1]                   Bit Offset : 00
>     [31Fh 0799   1]         Encoded Access Width : 04 [QWord Access:64]
>     [320h 0800   8]                      Address : 00000000785D0040
> 
>     [328h 0808  28]                       Notify : [Hardware Error Notification Structure]
>     [328h 0808   1]                  Notify Type : 08 [SEA]
>     [329h 0809   1]                Notify Length : 1C
>     [32Ah 0810   2]   Configuration Write Enable : 0000
>     [32Ch 0812   4]                 PollInterval : 00000000
>     [330h 0816   4]                       Vector : 00000000
>     [334h 0820   4]      Polling Threshold Value : 00000000
>     [338h 0824   4]     Polling Threshold Window : 00000000
>     [33Ch 0828   4]        Error Threshold Value : 00000000
>     [340h 0832   4]       Error Threshold Window : 00000000
> 
>     [344h 0836   4]    Error Status Block Length : 00001000
>     [348h 0840  12]            Read Ack Register : [Generic Address Structure]
>     [348h 0840   1]                     Space ID : 00 [SystemMemory]
>     [349h 0841   1]                    Bit Width : 40
>     [34Ah 0842   1]                   Bit Offset : 00
>     [34Bh 0843   1]         Encoded Access Width : 04 [QWord Access:64]
>     [34Ch 0844   8]                      Address : 00000000785D0098
> 
>     [354h 0852   8]            Read Ack Preserve : 00000000FFFFFFFE
>     [35Ch 0860   8]               Read Ack Write : 0000000000000001
> 
>     .....................................................................................
> 
> (3) After a synchronous external abort(SEA) happen, Qemu receive a SIGBUS and 
>     filled the CPER into guest GHES memory.  For example, according to above table,
>     the address that contains the physical address of a block of memory that holds
>     the error status data for this abort is 0x00000000785D0040
> (4) the address for SEA notification error source is 0x785d80b0
>     (qemu) xp /1 0x00000000785D0040
>     00000000785d0040: 0x785d80b0
> 
> (5) check the content of generic error status block and generic error data entry
>     (qemu) xp /100x 0x785d80b0
>     00000000785d80b0: 0x00000001 0x00000000 0x00000000 0x00000098
>     00000000785d80c0: 0x00000000 0xa5bc1114 0x4ede6f64 0x833e63b8
>     00000000785d80d0: 0xb1837ced 0x00000000 0x00000300 0x00000050
>     00000000785d80e0: 0x00000000 0x00000000 0x00000000 0x00000000
>     00000000785d80f0: 0x00000000 0x00000000 0x00000000 0x00000000
>     00000000785d8100: 0x00000000 0x00000000 0x00000000 0x00004002
> (6) check the OSPM's ACK value(for example SEA)
>     /* Before OSPM acknowledges the error, check the ACK value */
>     (qemu) xp /1 0x00000000785D0098
>     00000000785d00f0: 0x00000000
> 
>     /* After OSPM acknowledges the error, check the ACK value, it change to 1 from 0 */
>     (qemu) xp /1 0x00000000785D0098
>     00000000785d00f0: 0x00000001
> 
> [2] host memory error hander deliver "BUS_MCEERR_AO" to Qemu, Qemu record the
>     guest CPER and notify guest by IRQ, then guest do the recovery.
> 
> [ 4895.040340] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 7
> [ 4895.367779] {2}[Hardware Error]: event severity: recoverable
> [ 4896.536868] {2}[Hardware Error]:  Error 0, type: recoverable
> [ 4896.753032] {2}[Hardware Error]:   section_type: memory error
> [ 4896.969088] {2}[Hardware Error]:   physical_address: 0x0000000040a08000
> [ 4897.211532] {2}[Hardware Error]:   error_type: 3, multi-bit ECC
> [ 4900.666650] Memory failure: 0x40600: already hardware poisoned
> [ 4902.744432] Memory failure: 0x40a08: Killing mca-recover:42 due to hardware memory corruption
> [ 4903.448544] Memory failure: 0x40a08: recovery action for dirty LRU page: RecoVered
> 
> [3] KVM deliver "BUS_MCEERR_AR" to Qemu, Qemu record the guest CPER and inject
>     synchronous external abort to notify guest, then guest do the recovery.
> 
> [ 1552.516170] Synchronous External Abort: synchronous external abort (0x92000410) at 0x000000003751c6b4
> [ 1553.074073] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 8
> [ 1553.081654] {1}[Hardware Error]: event severity: recoverable
> [ 1554.034191] {1}[Hardware Error]:  Error 0, type: recoverable
> [ 1554.037934] {1}[Hardware Error]:   section_type: memory error
> [ 1554.513261] {1}[Hardware Error]:   physical_address: 0x0000000040fa6000
> [ 1554.513944] {1}[Hardware Error]:   error_type: 3, multi-bit ECC
> [ 1555.041451] Memory failure: 0x40fa6: Killing mca-recover:1296 due to hardware memory corruption
> [ 1555.373116] Memory failure: 0x40fa6: recovery action for dirty LRU page: Recovered
> 
> [4] Qemu set guest ESR and inject virtual SError test result:
> 
> KVM return Error status to Qemu, Qemu set the guest ESR and inject virtual SError.
> As shown below, the ESR value 0xbe000c11 is set by Qemu
> 
> Bad mode in Error handler detected, code 0xbe000c11 -- SError
> CPU: 0 PID: 539 Comm: devmem Tainted: G      D         4.1.0+ #20
> Hardware name: linux,dummy-virt (DT)
> task: ffffffc019aad600 ti: ffffffc008134000 task.ti: ffffffc008134000
> PC is at 0x405cc0
> LR is at 0x40ce80
> pc : [<0000000000405cc0>] lr : [<000000000040ce80>] pstate: 60000000
> sp : ffffffc008137ff0
> x29: 0000007fd9e80790 x28: 0000000000000000
> x27: 00000000000000ad x26: 000000000049c000
> x25: 000000000048904b x24: 000000000049c000
> x23: 0000000040600000 x22: 0000007fd9e808d0
> x21: 0000000000000002 x20: 0000000000000000
> x19: 0000000000000020 x18: 0000000000000000
> x17: 0000000000405cc0 x16: 000000000049c698
> x15: 0000000000005798 x14: 0000007f93875f1c
> x13: 0000007f93a8ccb0 x12: 0000000000000137
> x11: 0000000000000000 x10: 0000000000000000
> x9 : 0000000000000000 x8 : 00000000000000de
> x7 : 0000000000000000 x6 : 0000000000002000
> x5 : 0000000040600000 x4 : 0000000000000003
> x3 : 0000000000000001 x2 : 00000000000f123b
> x1 : 0000000000000008 x0 : 000000000047a048
> 
> 
> Dongjiu Geng (12):
>   ACPI: add related GHES structures and macros definition
>   ACPI: Add APEI GHES table generation and CPER record support
>   docs: APEI GHES generation description
>   ACPI: enable APEI GHES in the configure file and build it
>   linux-headers: sync against Linux v4.14-rc8
>   target-arm: kvm64: detect whether can set vsesr_el2
>   target-arm: handle SError interrupt exception from the guest OS
>   target-arm: kvm64: inject synchronous External Abort
>   Move related hwpoison page function to accel/kvm/ folder
>   ARM: ACPI: Add _E04 for hardware error device
>   hw/arm/virt: Add RAS platform version for migration
>   target-arm: kvm64: handle SIGBUS signal from kernel or KVM
> 
>  accel/kvm/kvm-all.c             |  34 ++++
>  default-configs/arm-softmmu.mak |   1 +
>  docs/specs/acpi_hest_ghes.txt   |  96 +++++++++++
>  hw/acpi/Makefile.objs           |   1 +
>  hw/acpi/aml-build.c             |   2 +
>  hw/acpi/hest_ghes.c             | 358 ++++++++++++++++++++++++++++++++++++++++
>  hw/arm/virt-acpi-build.c        |  43 ++++-
>  hw/arm/virt.c                   |  22 +++
>  include/exec/ram_addr.h         |   5 +
>  include/hw/acpi/acpi-defs.h     |  49 ++++++
>  include/hw/acpi/aml-build.h     |   1 +
>  include/hw/acpi/hest_ghes.h     |  83 ++++++++++
>  include/hw/arm/virt.h           |   1 +
>  include/sysemu/kvm.h            |   2 +-
>  include/sysemu/sysemu.h         |   3 +
>  linux-headers/linux/kvm.h       |   3 +
>  target/arm/internals.h          |   4 +
>  target/arm/kvm.c                |   5 +
>  target/arm/kvm32.c              |   6 +
>  target/arm/kvm64.c              | 138 ++++++++++++++++
>  target/arm/kvm_arm.h            |   8 +
>  target/i386/kvm.c               |  33 ----
>  vl.c                            |  12 ++
>  23 files changed, 875 insertions(+), 35 deletions(-)
>  create mode 100644 docs/specs/acpi_hest_ghes.txt
>  create mode 100644 hw/acpi/hest_ghes.c
>  create mode 100644 include/hw/acpi/hest_ghes.h
> 

WARNING: multiple messages have this Message-ID (diff)
From: gengdongjiu <gengdongjiu@huawei.com>
To: mst@redhat.com, Igor Mammedov <imammedo@redhat.com>,
	"peter.maydell@linaro.org" <peter.maydell@linaro.org>,
	zhaoshenglong@huawei.com, James Morse <james.morse@arm.com>,
	lersek@redhat.com, Marc Zyngier <marc.zyngier@arm.com>,
	christoffer.dall@linaro.org, rth@twiddle.net,
	ehabkost@redhat.com, qemu-devel@nongnu.org,
	qemu-arm@nongnu.orgrth@twiddle.netehabkost@redhat.com,
	"kvm@vger.kernel.org" <kvm@vger.kernel.org>,
	pbonzini@redhat.com
Subject: Re: [Qemu-devel] [PATCH v13 00/12] Add ARMv8 RAS virtualization support in QEMU
Date: Mon, 4 Dec 2017 20:15:56 +0800	[thread overview]
Message-ID: <470c9df5-f2e8-974b-b37f-eff84a6f3d71@huawei.com> (raw)
In-Reply-To: <1511807966-23936-1-git-send-email-gengdongjiu@huawei.com>

ping again.

thanks


On 2017/11/28 2:39, Dongjiu Geng wrote:
> From: gengdongjiu <gengdongjiu@huawei.com>
> 
> In the ARMv8 platform, the CPU error type are synchronous external
> abort(SEA) and SError Interrupt (SEI). If guest happen exception, 
> sometimes  guest itself do the recovery is better, because host 
> does not know guest's detailed info. For example, if a guest
> user-space application happen exception, guest can kill this 
> application, but host can not do that.
> 
> For the ARMv8 SEA/SEI, KVM or host kernel will deliver SIGBUS or
> use other interface to notify user space. After user space gets 
> the notification, it will record the CPER to guest GHES buffer
> for guest and inject a exception or IRQ to KVM.
> 
> In the current implement, if the SIGBUS is BUS_MCEERR_AR, we will
> treat it as synchronous exception, and use ARMv8 SEA notification type
> to notify guest after recording CPER for guest; If the SIGBUS is
> BUS_MCEERR_AO, we will treat it as asynchronous exception, and use
> GPIO-Signal to notify guest after recording CPER for guest.
> 
> If KVM wants userspace to do the recovery for the SError, it will return a error
> status to Qemu. Then Qemu will specify the guest ESR value and inject a virtual
> SError.
> 
> This series patches have three parts:
> 1. Generate APEI/GHES table and record CPER for guest in runtime.
> 2. Handle the SIGBUS signal, record the CPER and fill into guest memory,
>    then according to SIGBUS type(BUS_MCEERR_AR or BUS_MCEERR_AO), using
>    different ACPI notification type to notify guest.
> 3. Specify guest SError ESR value and inject a virtual SError 
> 
> Whole solution was suggested by James(james.morse@arm.com); inject RAS SEA abort and specify guest ESR
> in user space are suggested by Marc(marc.zyngier@arm.com), APEI part solution is suggested by
> Laszlo(lersek@redhat.com). Shown some discussion in [1].
> 
> 
> This series patches have already tested on ARM64 platform with RAS feature enabled:
> Show the APEI part verification result in [2]
> Show the BUS_MCEERR_AR and BUS_MCEERR_AO SIGBUS handling verification result in [3]
> Show Qemu set guest ESR and inject virtual SError verification result in [4]
> 
> ---
> Change since v12:
> 1. Address Paolo's comments to move HWPoisonPage definition to accel/kvm/kvm-all.c
> 2. Only call kvm_cpu_synchronize_state() when get the BUS_MCEERR_AR signal
> 3. Only add and enable GPIO-Signal and ARMv8 SEA two hardware error sources
> 4. Address Michael's comments to not sync SPDX from Linux kernel header file 
> 
> Change since v11:
> Address James's comments(james.morse@arm.com)
> 1. Check whether KVM has the capability to to set ESR instead of detecting host CPU RAS capability
> 2. For SIGBUS_MCEERR_AR SIGBUS, use Synchronous-External-Abort(SEA) notification type
>    for SIGBUS_MCEERR_AO SIGBUS, use GPIO-Signal notification
> 
> 
> Address Shannon's comments(for ACPI part):
> 1. Unify hest_ghes.c and hest_ghes.h license declaration
> 2. Remove unnecessary including "qmp-commands.h" in hest_ghes.c
> 3. Unconditionally add guest APEI table based on James's comments(james.morse@arm.com) 
> 4. Add a option to virt machine for migration compatibility. On new virt machine it's on
>    by default while off for old ones, we enabled it since 2.10
> 5. Refer to the ACPI spec version which introduces Hardware Error Notification first time
> 6. Add ACPI_HEST_NOTIFY_RESERVED notification type
> 
> Address Igor's comments(for ACPI part):
> 1. Add doc patch first which will describe how it's supposed to work between QEMU/firmware/guest
>    OS with expected flows.
> 2. Move APEI diagrams into doc/spec patch
> 3. Remove redundant g_malloc in ghes_record_cper()
> 4. Use build_append_int_noprefix() API to compose whole error status block and whole APEI table, 
>    and try to get rid of most structures in patch 1, as they will be left unused after that
> 5. Reuse something like https://github.com/imammedo/qemu/commit/3d2fd6d13a3ea298d2ee814835495ce6241d085c
>    to build GAS
> 6. Remove much offsetof() in the function
> 7. Build independent tables first and only then build dependent tables passing to it pointers
>    to previously build table if necessary.
> 8. Redefine macro GHES_ACPI_HEST_NOTIFY_RESERVED to ACPI_HEST_ERROR_SOURCE_COUNT to avoid confusion
> 
> 
> Address Peter Maydell's comments
> 1. linux-headers is done as a patch of their own created using scripts/update-linux-headers.sh run against a
>    mainline kernel tree 
> 2. Tested whether this patchset builds OK on aarch32  
> 3. Abstract Hwpoison page adding code  out properly into a cpu-independent source file from target/i386/kvm.c,
>    such as kvm-all.c
> 4. Add doc-comment formatted documentation comment for new globally-visible function prototype in a header
> 
> ---
> [1]:
> https://lkml.org/lkml/2017/2/27/246
> https://patchwork.kernel.org/patch/9633105/
> https://patchwork.kernel.org/patch/9925227/
> 
> [2]:
> Note: the UEFI(QEMU_EFI.fd) is needed if guest want to use ACPI table.
> 
> After guest boot up, dump the APEI table, then can see the initialized table
> (1) # iasl -p ./HEST -d /sys/firmware/acpi/tables/HEST
> (2) # cat HEST.dsl
>     /*
>      * Intel ACPI Component Architecture
>      * AML/ASL+ Disassembler version 20170728 (64-bit version)
>      * Copyright (c) 2000 - 2017 Intel Corporation
>      *
>      * Disassembly of /sys/firmware/acpi/tables/HEST, Mon Sep  5 07:59:17 2016
>      *
>      * ACPI Data Table [HEST]
>      *
>      * Format: [HexOffset DecimalOffset ByteLength]  FieldName : FieldValue
>      */
> 
>     ..................................................................................
>     [308h 0776   2]                Subtable Type : 000A [Generic Hardware Error Source V2]
>     [30Ah 0778   2]                    Source Id : 0008
>     [30Ch 0780   2]            Related Source Id : FFFF
>     [30Eh 0782   1]                     Reserved : 00
>     [30Fh 0783   1]                      Enabled : 01
>     [310h 0784   4]       Records To Preallocate : 00000001
>     [314h 0788   4]      Max Sections Per Record : 00000001
>     [318h 0792   4]          Max Raw Data Length : 00001000
> 
>     [31Ch 0796  12]         Error Status Address : [Generic Address Structure]
>     [31Ch 0796   1]                     Space ID : 00 [SystemMemory]
>     [31Dh 0797   1]                    Bit Width : 40
>     [31Eh 0798   1]                   Bit Offset : 00
>     [31Fh 0799   1]         Encoded Access Width : 04 [QWord Access:64]
>     [320h 0800   8]                      Address : 00000000785D0040
> 
>     [328h 0808  28]                       Notify : [Hardware Error Notification Structure]
>     [328h 0808   1]                  Notify Type : 08 [SEA]
>     [329h 0809   1]                Notify Length : 1C
>     [32Ah 0810   2]   Configuration Write Enable : 0000
>     [32Ch 0812   4]                 PollInterval : 00000000
>     [330h 0816   4]                       Vector : 00000000
>     [334h 0820   4]      Polling Threshold Value : 00000000
>     [338h 0824   4]     Polling Threshold Window : 00000000
>     [33Ch 0828   4]        Error Threshold Value : 00000000
>     [340h 0832   4]       Error Threshold Window : 00000000
> 
>     [344h 0836   4]    Error Status Block Length : 00001000
>     [348h 0840  12]            Read Ack Register : [Generic Address Structure]
>     [348h 0840   1]                     Space ID : 00 [SystemMemory]
>     [349h 0841   1]                    Bit Width : 40
>     [34Ah 0842   1]                   Bit Offset : 00
>     [34Bh 0843   1]         Encoded Access Width : 04 [QWord Access:64]
>     [34Ch 0844   8]                      Address : 00000000785D0098
> 
>     [354h 0852   8]            Read Ack Preserve : 00000000FFFFFFFE
>     [35Ch 0860   8]               Read Ack Write : 0000000000000001
> 
>     .....................................................................................
> 
> (3) After a synchronous external abort(SEA) happen, Qemu receive a SIGBUS and 
>     filled the CPER into guest GHES memory.  For example, according to above table,
>     the address that contains the physical address of a block of memory that holds
>     the error status data for this abort is 0x00000000785D0040
> (4) the address for SEA notification error source is 0x785d80b0
>     (qemu) xp /1 0x00000000785D0040
>     00000000785d0040: 0x785d80b0
> 
> (5) check the content of generic error status block and generic error data entry
>     (qemu) xp /100x 0x785d80b0
>     00000000785d80b0: 0x00000001 0x00000000 0x00000000 0x00000098
>     00000000785d80c0: 0x00000000 0xa5bc1114 0x4ede6f64 0x833e63b8
>     00000000785d80d0: 0xb1837ced 0x00000000 0x00000300 0x00000050
>     00000000785d80e0: 0x00000000 0x00000000 0x00000000 0x00000000
>     00000000785d80f0: 0x00000000 0x00000000 0x00000000 0x00000000
>     00000000785d8100: 0x00000000 0x00000000 0x00000000 0x00004002
> (6) check the OSPM's ACK value(for example SEA)
>     /* Before OSPM acknowledges the error, check the ACK value */
>     (qemu) xp /1 0x00000000785D0098
>     00000000785d00f0: 0x00000000
> 
>     /* After OSPM acknowledges the error, check the ACK value, it change to 1 from 0 */
>     (qemu) xp /1 0x00000000785D0098
>     00000000785d00f0: 0x00000001
> 
> [2] host memory error hander deliver "BUS_MCEERR_AO" to Qemu, Qemu record the
>     guest CPER and notify guest by IRQ, then guest do the recovery.
> 
> [ 4895.040340] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 7
> [ 4895.367779] {2}[Hardware Error]: event severity: recoverable
> [ 4896.536868] {2}[Hardware Error]:  Error 0, type: recoverable
> [ 4896.753032] {2}[Hardware Error]:   section_type: memory error
> [ 4896.969088] {2}[Hardware Error]:   physical_address: 0x0000000040a08000
> [ 4897.211532] {2}[Hardware Error]:   error_type: 3, multi-bit ECC
> [ 4900.666650] Memory failure: 0x40600: already hardware poisoned
> [ 4902.744432] Memory failure: 0x40a08: Killing mca-recover:42 due to hardware memory corruption
> [ 4903.448544] Memory failure: 0x40a08: recovery action for dirty LRU page: RecoVered
> 
> [3] KVM deliver "BUS_MCEERR_AR" to Qemu, Qemu record the guest CPER and inject
>     synchronous external abort to notify guest, then guest do the recovery.
> 
> [ 1552.516170] Synchronous External Abort: synchronous external abort (0x92000410) at 0x000000003751c6b4
> [ 1553.074073] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 8
> [ 1553.081654] {1}[Hardware Error]: event severity: recoverable
> [ 1554.034191] {1}[Hardware Error]:  Error 0, type: recoverable
> [ 1554.037934] {1}[Hardware Error]:   section_type: memory error
> [ 1554.513261] {1}[Hardware Error]:   physical_address: 0x0000000040fa6000
> [ 1554.513944] {1}[Hardware Error]:   error_type: 3, multi-bit ECC
> [ 1555.041451] Memory failure: 0x40fa6: Killing mca-recover:1296 due to hardware memory corruption
> [ 1555.373116] Memory failure: 0x40fa6: recovery action for dirty LRU page: Recovered
> 
> [4] Qemu set guest ESR and inject virtual SError test result:
> 
> KVM return Error status to Qemu, Qemu set the guest ESR and inject virtual SError.
> As shown below, the ESR value 0xbe000c11 is set by Qemu
> 
> Bad mode in Error handler detected, code 0xbe000c11 -- SError
> CPU: 0 PID: 539 Comm: devmem Tainted: G      D         4.1.0+ #20
> Hardware name: linux,dummy-virt (DT)
> task: ffffffc019aad600 ti: ffffffc008134000 task.ti: ffffffc008134000
> PC is at 0x405cc0
> LR is at 0x40ce80
> pc : [<0000000000405cc0>] lr : [<000000000040ce80>] pstate: 60000000
> sp : ffffffc008137ff0
> x29: 0000007fd9e80790 x28: 0000000000000000
> x27: 00000000000000ad x26: 000000000049c000
> x25: 000000000048904b x24: 000000000049c000
> x23: 0000000040600000 x22: 0000007fd9e808d0
> x21: 0000000000000002 x20: 0000000000000000
> x19: 0000000000000020 x18: 0000000000000000
> x17: 0000000000405cc0 x16: 000000000049c698
> x15: 0000000000005798 x14: 0000007f93875f1c
> x13: 0000007f93a8ccb0 x12: 0000000000000137
> x11: 0000000000000000 x10: 0000000000000000
> x9 : 0000000000000000 x8 : 00000000000000de
> x7 : 0000000000000000 x6 : 0000000000002000
> x5 : 0000000040600000 x4 : 0000000000000003
> x3 : 0000000000000001 x2 : 00000000000f123b
> x1 : 0000000000000008 x0 : 000000000047a048
> 
> 
> Dongjiu Geng (12):
>   ACPI: add related GHES structures and macros definition
>   ACPI: Add APEI GHES table generation and CPER record support
>   docs: APEI GHES generation description
>   ACPI: enable APEI GHES in the configure file and build it
>   linux-headers: sync against Linux v4.14-rc8
>   target-arm: kvm64: detect whether can set vsesr_el2
>   target-arm: handle SError interrupt exception from the guest OS
>   target-arm: kvm64: inject synchronous External Abort
>   Move related hwpoison page function to accel/kvm/ folder
>   ARM: ACPI: Add _E04 for hardware error device
>   hw/arm/virt: Add RAS platform version for migration
>   target-arm: kvm64: handle SIGBUS signal from kernel or KVM
> 
>  accel/kvm/kvm-all.c             |  34 ++++
>  default-configs/arm-softmmu.mak |   1 +
>  docs/specs/acpi_hest_ghes.txt   |  96 +++++++++++
>  hw/acpi/Makefile.objs           |   1 +
>  hw/acpi/aml-build.c             |   2 +
>  hw/acpi/hest_ghes.c             | 358 ++++++++++++++++++++++++++++++++++++++++
>  hw/arm/virt-acpi-build.c        |  43 ++++-
>  hw/arm/virt.c                   |  22 +++
>  include/exec/ram_addr.h         |   5 +
>  include/hw/acpi/acpi-defs.h     |  49 ++++++
>  include/hw/acpi/aml-build.h     |   1 +
>  include/hw/acpi/hest_ghes.h     |  83 ++++++++++
>  include/hw/arm/virt.h           |   1 +
>  include/sysemu/kvm.h            |   2 +-
>  include/sysemu/sysemu.h         |   3 +
>  linux-headers/linux/kvm.h       |   3 +
>  target/arm/internals.h          |   4 +
>  target/arm/kvm.c                |   5 +
>  target/arm/kvm32.c              |   6 +
>  target/arm/kvm64.c              | 138 ++++++++++++++++
>  target/arm/kvm_arm.h            |   8 +
>  target/i386/kvm.c               |  33 ----
>  vl.c                            |  12 ++
>  23 files changed, 875 insertions(+), 35 deletions(-)
>  create mode 100644 docs/specs/acpi_hest_ghes.txt
>  create mode 100644 hw/acpi/hest_ghes.c
>  create mode 100644 include/hw/acpi/hest_ghes.h
> 

       reply	other threads:[~2017-12-04 12:16 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1511807966-23936-1-git-send-email-gengdongjiu@huawei.com>
2017-12-04 12:15 ` gengdongjiu [this message]
2017-12-04 12:15   ` [Qemu-devel] [PATCH v13 00/12] Add ARMv8 RAS virtualization support in QEMU gengdongjiu
2017-12-11 11:31   ` gengdongjiu
2017-12-11 11:31     ` [Qemu-devel] " gengdongjiu
2017-12-11 13:32     ` Igor Mammedov
2017-12-11 13:32       ` [Qemu-devel] " Igor Mammedov
2017-12-12  1:31       ` gengdongjiu
2017-12-12  1:31         ` [Qemu-devel] " gengdongjiu
2017-12-13  3:59       ` gengdongjiu
2017-12-13  3:59         ` [Qemu-devel] " gengdongjiu
2017-12-13 18:12         ` Peter Maydell
2017-12-13 18:12           ` [Qemu-devel] " Peter Maydell
2017-12-14  1:24           ` gengdongjiu
2017-12-14  1:24             ` gengdongjiu
2017-11-27 18:49 Dongjiu Geng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=470c9df5-f2e8-974b-b37f-eff84a6f3d71@huawei.com \
    --to=gengdongjiu@huawei.com \
    --cc=christoffer.dall@linaro.org \
    --cc=ehabkost@redhat.com \
    --cc=imammedo@redhat.com \
    --cc=james.morse@arm.com \
    --cc=kvm@vger.kernel.org \
    --cc=lersek@redhat.com \
    --cc=marc.zyngier@arm.com \
    --cc=mst@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=rth@twiddle.net \
    --cc=zhaoshenglong@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.