From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Return-Path: Subject: Re: Possible regression between 4.9 and 4.13 To: Mathias Nyman , Felipe Balbi , linux-pci , linux-usb , Linux ARM Cc: Bjorn Helgaas , Alan Stern , Greg Kroah-Hartman , Jon Derrick , Keith Busch References: <4dee5523-2d76-e731-6e81-f3027e88827f@free.fr> <87a82qbyv5.fsf@linux.intel.com> <599D3410.9050504@intel.com> From: Mason Message-ID: <48fcf483-3bab-8ab3-4bfa-e81ca8ee8353@free.fr> Date: Wed, 23 Aug 2017 12:19:49 +0200 MIME-Version: 1.0 In-Reply-To: <599D3410.9050504@intel.com> Content-Type: text/plain; charset=UTF-8 List-ID: On 23/08/2017 09:51, Mathias Nyman wrote: > very likely cause is the more aggressive detection of pci removed xhci hosts > > See commit d9f11ba9f107aa335091ab8d7ba5eea714e46e8b > xhci: Rework how we handle unresponsive or hoptlug removed hosts > > It checks if a xhci register reads returns 0xffffffff and assumes xhci > died in that case. I've just tested 4.11.12 + a few local patches to back-port PCIe host bridge support. It "works" as well as 4.9 (i.e. modulo the "AER: Uncorrected (Non-Fatal) error received") [ 0.508533] pcie_tango 50000000.pcie: simultaneous PCI config and MMIO accesses may cause data corruption [ 0.519622] OF: PCI: host bridge /soc/pcie@2e000 ranges: [ 0.519645] OF: PCI: MEM 0x50400000..0x53ffffff -> 0x00400000 [ 0.519725] pcie_tango 50000000.pcie: ECAM at [mem 0x50000000-0x503fffff] for [bus 00-03] [ 0.519872] pcie_tango 50000000.pcie: PCI host bridge to bus 0000:00 [ 0.519886] pci_bus 0000:00: root bus resource [bus 00-03] [ 0.519898] pci_bus 0000:00: root bus resource [mem 0x50400000-0x53ffffff] (bus address [0x00400000-0x03ffffff]) [ 0.520201] PCI: bus0: Fast back to back transfers disabled [ 0.520213] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.520922] PCI: bus1: Fast back to back transfers disabled [ 0.520964] pci 0000:00:00.0: of_irq_parse_pci: failed with rc=-22 [ 0.520993] pci 0000:00:00.0: BAR 8: assigned [mem 0x50400000-0x504fffff] [ 0.521004] pci 0000:01:00.0: BAR 0: assigned [mem 0x50400000-0x50401fff 64bit] [ 0.521025] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.521033] pci 0000:00:00.0: bridge window [mem 0x50400000-0x504fffff] [ 0.521085] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 0.521282] pcieport 0000:00:00.0: Signaling PME with IRQ 30 [ 0.521402] pcieport 0000:00:00.0: AER enabled with IRQ 30 [ 0.521526] pci 0000:01:00.0: enabling device (0140 -> 0142) ... [ 1.239706] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.244998] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.258048] xhci_hcd 0000:01:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000010 [ 1.267467] hub 1-0:1.0: USB hub found [ 1.271287] hub 1-0:1.0: 4 ports detected [ 1.275761] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.281048] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.288578] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.297234] hub 2-0:1.0: USB hub found [ 1.301042] hub 2-0:1.0: 4 ports detected [ 1.305681] usbcore: registered new interface driver usb-storage PLUG #1 [ 26.104607] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 26.143799] usb-storage 2-2:1.0: USB Mass Storage device detected [ 26.150253] scsi host0: usb-storage 2-2:1.0 [ 27.177298] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6 [ 27.187586] sd 0:0:0:0: [sda] 15109516 512-byte logical blocks: (7.74 GB/7.20 GiB) [ 27.199000] sd 0:0:0:0: [sda] Write Protect is off [ 27.204186] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 27.216322] sda: sda1 [ 27.220584] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 27.252046] random: fast init done UNPLUG #1 [ 37.334040] pcieport 0000:00:00.0: AER: Uncorrected (Non-Fatal) error received: id=0000 [ 37.342135] pcieport 0000:00:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0000(Requester ID) [ 37.353970] pcieport 0000:00:00.0: device [1105:0024] error status/mask=00004000/00000000 [ 37.362589] pcieport 0000:00:00.0: [14] Completion Timeout (First) [ 37.369485] pcieport 0000:00:00.0: AER: Device recovery failed [ 38.066538] xhci_hcd 0000:01:00.0: Cannot set link state. [ 38.072039] usb usb2-port2: cannot disable (err = -32) [ 38.077348] usb 2-2: USB disconnect, device number 2 [ 38.082711] pcieport 0000:00:00.0: AER: Uncorrected (Non-Fatal) error received: id=0000 [ 38.094279] pcieport 0000:00:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0000(Requester ID) [ 38.108006] pcieport 0000:00:00.0: device [1105:0024] error status/mask=00004000/00000000 [ 38.116878] pcieport 0000:00:00.0: [14] Completion Timeout (First) [ 38.123954] pcieport 0000:00:00.0: AER: Device recovery failed PLUG #2 [ 55.097922] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd [ 55.137590] usb-storage 2-2:1.0: USB Mass Storage device detected [ 55.144016] scsi host0: usb-storage 2-2:1.0 [ 56.163907] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6 [ 56.174851] sd 0:0:0:0: [sda] 15109516 512-byte logical blocks: (7.74 GB/7.20 GiB) [ 56.184218] sd 0:0:0:0: [sda] Write Protect is off [ 56.190162] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 56.202117] sda: sda1 [ 56.207112] sd 0:0:0:0: [sda] Attached SCSI removable disk UNPLUG #2 [ 63.228310] pcieport 0000:00:00.0: AER: Uncorrected (Non-Fatal) error received: id=0000 [ 63.236403] pcieport 0000:00:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0000(Requester ID) [ 63.248220] pcieport 0000:00:00.0: device [1105:0024] error status/mask=00004000/00000000 [ 63.256653] pcieport 0000:00:00.0: [14] Completion Timeout (First) [ 63.263523] pcieport 0000:00:00.0: AER: Device recovery failed [ 63.959768] xhci_hcd 0000:01:00.0: Cannot set link state. [ 63.965227] usb usb2-port2: cannot disable (err = -32) [ 63.970409] usb 2-2: USB disconnect, device number 3 [ 63.975664] pcieport 0000:00:00.0: AER: Uncorrected (Non-Fatal) error received: id=0000 [ 63.987356] pcieport 0000:00:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0000(Requester ID) [ 64.000021] pcieport 0000:00:00.0: device [1105:0024] error status/mask=00004000/00000000 [ 64.008655] pcieport 0000:00:00.0: [14] Completion Timeout (First) [ 64.015553] pcieport 0000:00:00.0: AER: Device recovery failed [ 64.021449] pcieport 0000:00:00.0: AER: Uncorrected (Non-Fatal) error received: id=0000 [ 64.029580] pcieport 0000:00:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0000(Requester ID) [ 64.041410] pcieport 0000:00:00.0: device [1105:0024] error status/mask=00004000/00000000 [ 64.049818] pcieport 0000:00:00.0: [14] Completion Timeout (First) [ 64.056658] pcieport 0000:00:00.0: AER: Device recovery failed Bjorn, What do you make of the AER logs? What can I do to debug this issue? Regards. FWIW, verbose lspci output below. # lspci -vv 00:00.0 PCI bridge: Sigma Designs, Inc. Device 0024 (rev 01) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR+ (64-bit, non-prefetchable) Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00000000-00000fff Memory behind bridge: 00400000-004fffff Prefetchable memory behind bridge: 00000000-000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] MSI: Enable+ Count=1/4 Maskable- 64bit+ Address: 00000000a002e07c Data: 0000 Capabilities: [78] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=3 PME- Capabilities: [80] Express (v2) Root Port (Slot-), MSI 03 DevCap: MaxPayload 256 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq- AuxPwr- TransPend+ LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <4us ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range B, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [800 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 0e, GenCap- CGenEn- ChkCap- ChkEn- Kernel driver in use: pcieport 01:00.0 USB controller: Renesas Technology Corp. uPD720201 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- References: <4dee5523-2d76-e731-6e81-f3027e88827f@free.fr> <87a82qbyv5.fsf@linux.intel.com> <599D3410.9050504@intel.com> Message-ID: <48fcf483-3bab-8ab3-4bfa-e81ca8ee8353@free.fr> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 23/08/2017 09:51, Mathias Nyman wrote: > very likely cause is the more aggressive detection of pci removed xhci hosts > > See commit d9f11ba9f107aa335091ab8d7ba5eea714e46e8b > xhci: Rework how we handle unresponsive or hoptlug removed hosts > > It checks if a xhci register reads returns 0xffffffff and assumes xhci > died in that case. I've just tested 4.11.12 + a few local patches to back-port PCIe host bridge support. It "works" as well as 4.9 (i.e. modulo the "AER: Uncorrected (Non-Fatal) error received") [ 0.508533] pcie_tango 50000000.pcie: simultaneous PCI config and MMIO accesses may cause data corruption [ 0.519622] OF: PCI: host bridge /soc/pcie at 2e000 ranges: [ 0.519645] OF: PCI: MEM 0x50400000..0x53ffffff -> 0x00400000 [ 0.519725] pcie_tango 50000000.pcie: ECAM at [mem 0x50000000-0x503fffff] for [bus 00-03] [ 0.519872] pcie_tango 50000000.pcie: PCI host bridge to bus 0000:00 [ 0.519886] pci_bus 0000:00: root bus resource [bus 00-03] [ 0.519898] pci_bus 0000:00: root bus resource [mem 0x50400000-0x53ffffff] (bus address [0x00400000-0x03ffffff]) [ 0.520201] PCI: bus0: Fast back to back transfers disabled [ 0.520213] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.520922] PCI: bus1: Fast back to back transfers disabled [ 0.520964] pci 0000:00:00.0: of_irq_parse_pci: failed with rc=-22 [ 0.520993] pci 0000:00:00.0: BAR 8: assigned [mem 0x50400000-0x504fffff] [ 0.521004] pci 0000:01:00.0: BAR 0: assigned [mem 0x50400000-0x50401fff 64bit] [ 0.521025] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.521033] pci 0000:00:00.0: bridge window [mem 0x50400000-0x504fffff] [ 0.521085] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 0.521282] pcieport 0000:00:00.0: Signaling PME with IRQ 30 [ 0.521402] pcieport 0000:00:00.0: AER enabled with IRQ 30 [ 0.521526] pci 0000:01:00.0: enabling device (0140 -> 0142) ... [ 1.239706] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.244998] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.258048] xhci_hcd 0000:01:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000010 [ 1.267467] hub 1-0:1.0: USB hub found [ 1.271287] hub 1-0:1.0: 4 ports detected [ 1.275761] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.281048] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.288578] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.297234] hub 2-0:1.0: USB hub found [ 1.301042] hub 2-0:1.0: 4 ports detected [ 1.305681] usbcore: registered new interface driver usb-storage PLUG #1 [ 26.104607] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd [ 26.143799] usb-storage 2-2:1.0: USB Mass Storage device detected [ 26.150253] scsi host0: usb-storage 2-2:1.0 [ 27.177298] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6 [ 27.187586] sd 0:0:0:0: [sda] 15109516 512-byte logical blocks: (7.74 GB/7.20 GiB) [ 27.199000] sd 0:0:0:0: [sda] Write Protect is off [ 27.204186] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 27.216322] sda: sda1 [ 27.220584] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 27.252046] random: fast init done UNPLUG #1 [ 37.334040] pcieport 0000:00:00.0: AER: Uncorrected (Non-Fatal) error received: id=0000 [ 37.342135] pcieport 0000:00:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0000(Requester ID) [ 37.353970] pcieport 0000:00:00.0: device [1105:0024] error status/mask=00004000/00000000 [ 37.362589] pcieport 0000:00:00.0: [14] Completion Timeout (First) [ 37.369485] pcieport 0000:00:00.0: AER: Device recovery failed [ 38.066538] xhci_hcd 0000:01:00.0: Cannot set link state. [ 38.072039] usb usb2-port2: cannot disable (err = -32) [ 38.077348] usb 2-2: USB disconnect, device number 2 [ 38.082711] pcieport 0000:00:00.0: AER: Uncorrected (Non-Fatal) error received: id=0000 [ 38.094279] pcieport 0000:00:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0000(Requester ID) [ 38.108006] pcieport 0000:00:00.0: device [1105:0024] error status/mask=00004000/00000000 [ 38.116878] pcieport 0000:00:00.0: [14] Completion Timeout (First) [ 38.123954] pcieport 0000:00:00.0: AER: Device recovery failed PLUG #2 [ 55.097922] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd [ 55.137590] usb-storage 2-2:1.0: USB Mass Storage device detected [ 55.144016] scsi host0: usb-storage 2-2:1.0 [ 56.163907] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 3.0 PQ: 0 ANSI: 6 [ 56.174851] sd 0:0:0:0: [sda] 15109516 512-byte logical blocks: (7.74 GB/7.20 GiB) [ 56.184218] sd 0:0:0:0: [sda] Write Protect is off [ 56.190162] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 56.202117] sda: sda1 [ 56.207112] sd 0:0:0:0: [sda] Attached SCSI removable disk UNPLUG #2 [ 63.228310] pcieport 0000:00:00.0: AER: Uncorrected (Non-Fatal) error received: id=0000 [ 63.236403] pcieport 0000:00:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0000(Requester ID) [ 63.248220] pcieport 0000:00:00.0: device [1105:0024] error status/mask=00004000/00000000 [ 63.256653] pcieport 0000:00:00.0: [14] Completion Timeout (First) [ 63.263523] pcieport 0000:00:00.0: AER: Device recovery failed [ 63.959768] xhci_hcd 0000:01:00.0: Cannot set link state. [ 63.965227] usb usb2-port2: cannot disable (err = -32) [ 63.970409] usb 2-2: USB disconnect, device number 3 [ 63.975664] pcieport 0000:00:00.0: AER: Uncorrected (Non-Fatal) error received: id=0000 [ 63.987356] pcieport 0000:00:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0000(Requester ID) [ 64.000021] pcieport 0000:00:00.0: device [1105:0024] error status/mask=00004000/00000000 [ 64.008655] pcieport 0000:00:00.0: [14] Completion Timeout (First) [ 64.015553] pcieport 0000:00:00.0: AER: Device recovery failed [ 64.021449] pcieport 0000:00:00.0: AER: Uncorrected (Non-Fatal) error received: id=0000 [ 64.029580] pcieport 0000:00:00.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, id=0000(Requester ID) [ 64.041410] pcieport 0000:00:00.0: device [1105:0024] error status/mask=00004000/00000000 [ 64.049818] pcieport 0000:00:00.0: [14] Completion Timeout (First) [ 64.056658] pcieport 0000:00:00.0: AER: Device recovery failed Bjorn, What do you make of the AER logs? What can I do to debug this issue? Regards. FWIW, verbose lspci output below. # lspci -vv 00:00.0 PCI bridge: Sigma Designs, Inc. Device 0024 (rev 01) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR+ (64-bit, non-prefetchable) Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00000000-00000fff Memory behind bridge: 00400000-004fffff Prefetchable memory behind bridge: 00000000-000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] MSI: Enable+ Count=1/4 Maskable- 64bit+ Address: 00000000a002e07c Data: 0000 Capabilities: [78] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=3 PME- Capabilities: [80] Express (v2) Root Port (Slot-), MSI 03 DevCap: MaxPayload 256 bytes, PhantFunc 0 ExtTag- RBE+ DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq- AuxPwr- TransPend+ LnkCap: Port #1, Speed 5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <2us, L1 <4us ClockPM- Surprise- LLActRep- BwNot+ ASPMOptComp- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- DevCap2: Completion Timeout: Range B, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff Status: NegoPending- InProgress- Capabilities: [800 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 0e, GenCap- CGenEn- ChkCap- ChkEn- Kernel driver in use: pcieport 01:00.0 USB controller: Renesas Technology Corp. uPD720201 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-