This updates the README for mmsd
---
 README | 66 +++++++++++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 61 insertions(+), 5 deletions(-)

diff --git a/README b/README
index e33be69..cecc99f 100644
--- a/README
+++ b/README
@@ -2,20 +2,76 @@ Multimedia Messaging Service
 ****************************
 
 Copyright (C) 2010-2011  Intel Corporation. All rights reserved.
+Updated 2021 by: Mohammad Sadiq, kent, kop316, 
+                 fuzzy7k, craftyguy, anteater
+Parts adapted from: https://source.puri.sm/Librem5/purple-mm-sms
+                    Copyright (C) 2018 Purism SPC
+                    
+About
+===========================
+mmsd is a lower level daemon that transmits and recieves MMSes. It
works with
+both the ofono stack and the Modem Manager stack.
 
+Please note that mmsd alone will not get MMS working! It is designed
to work 
+with a higher level chat application to facilitate fetching and 
+sending MMS. It interfaces with other applications via the dbus.
 
-Compilation and installation
+Compiling mmsd
 ============================
-
 In order to compile proxy daemon you need following software packages:
 	- GCC compiler
 	- D-Bus library
 	- GLib library
 
+Installing mmsd
+============================
+
 To configure run:
-	./configure --prefix=/usr
+    ./bootstrap-configure --prefix=/usr/
 
 Configure automatically searches for all required components and
packages.
 
-To compile and install run:
-	make && make install
+To compile, run:
+    make
+	
+And to Install:
+    make install
+
+mmsd will be installed in /${prefix}/libexec (if you are following
this guide,
+it is /usr/libexec )
+
+To uninstall, simply remove the "mmsd" binary from /${prefix}/libexec
or run:
+    sudo make uninstall
+
+Note that you must manually configure your favorite service manager to
run 
+the daemon, as this installer does not configure it to autorun.
+
+Testing out mmsd
+===========================
+To configure, run:
+    ./bootstrap-configure --enable-debug --enable-maintainer-mode
+
+Make it:
+    make 
+
+Run daemon in foreground with debugging:
+    ./src/mmsd -n -d 'src/*'
+
+General Configuration
+===========================
+On first run, mmsd will write a settings file at
+"$HOME/.mms/$PLUGIN/mms"
+
+IMPORTANT NOTE: If you change settings in this file, mmsd MUST BE
RESTARTED 
+                for the changes to take effect!
+
+This settings file use sane defaults, but you can change them:
+
+UseDeliveryReports
+        Whether you want delivery reports for MMSes you send
+
+TotalMaxAttachmentSize
+        The maximum size all of your attachments can be before mmsd
rejects it.
+        NOTE: This value is carrier specific! Changing this value to a
higher
+              number may cause your carrier to silently reject MMSes
you send.
+              CHANGE AT YOUR OWN RISK!
\ No newline at end of file
-- 
2.30.0