Alex Betis napsal(a):

On Wed, Dec 3, 2008 at 9:32 AM, Alex Betis <alex.betis@gmail.com 
<mailto:alex.betis@gmail.com>> wrote:

    On Wed, Dec 3, 2008 at 12:31 AM, Pavel Hofman
    <pavel.hofman@insite.cz <mailto:pavel.hofman@insite.cz>> wrote:

        pavel@htpc:~/project/satelit2/szap-s2$
        <mailto:pavel@htpc:~/project/satelit2/szap-s2$> ./szap-s2 -x
        EinsFestival
        reading channels from file '/home/pavel/.szap/channels.conf'
        zapping to 5 'EinsFestival':
        delivery DVB-S, modulation QPSK
        sat 0, frequency 12110 MHz H, symbolrate 27500000, coderate auto,

    I don't think there is 12110 channel on Astra 19.2, at least not
    accirding to lyngsat.

My bad, there is such channel... I somehow got to Astra 1G only page 
instead of all Atras in that position.
Try other frequencies anyway.

Maybe you have diseqc problems?

Alex,

Thanks a lot for your help. I tested the card on a different computer 
with Windows and I could scan and view both Astra 19.2E and Astra 23.5E 
free-to-air programs through A and B parts of the dual LNB. I have no 
decoding card yet, nor any adapter.

Since the computer was different, I will test my final computer/setup in 
windows (just have to install them first here :) ). Nevertheless I think 
it will work in windows.

I will get back with result.

Regards,

Pavel.

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Pavel Hofman napsal(a):

Alex Betis napsal(a):

On Wed, Dec 3, 2008 at 9:32 AM, Alex Betis <alex.betis@gmail.com 
<mailto:alex.betis@gmail.com>> wrote:

    On Wed, Dec 3, 2008 at 12:31 AM, Pavel Hofman
    <pavel.hofman@insite.cz <mailto:pavel.hofman@insite.cz>> wrote:

        pavel@htpc:~/project/satelit2/szap-s2$
        <mailto:pavel@htpc:~/project/satelit2/szap-s2$> ./szap-s2 -x
        EinsFestival
        reading channels from file '/home/pavel/.szap/channels.conf'
        zapping to 5 'EinsFestival':
        delivery DVB-S, modulation QPSK
        sat 0, frequency 12110 MHz H, symbolrate 27500000, coderate auto,

    I don't think there is 12110 channel on Astra 19.2, at least not
    accirding to lyngsat.

My bad, there is such channel... I somehow got to Astra 1G only page 
instead of all Atras in that position.
Try other frequencies anyway.

Maybe you have diseqc problems?

Hi,

Partial success :)

I added a few free-to-air channels I was able to tune in WinXP to 
channels.conf:

Entertainment:12012:v:0:27500:2582:2581:8037
SkyNews:12207:v:0:27500:514:645:4707
WineTV:11555:h:1:27500:2372:2374:50435
AvaTest:11555:h:1:27500:2329:2330:50446
Vegas:11515:h:1:27500:3568:3567:8035
Faith:11515:h:1:27500:2375:2376:50455

The first two on LNB0, the rest on LNB1.

For LNB0, I can tune via szap2:

pavel@htpc:~/project/satelit2/szap-s2$ ./szap-s2 -r SkyNews
reading channels from file '/home/pavel/.szap/channels.conf'
zapping to 2 'SkyNews':
delivery DVB-S, modulation QPSK
sat 0, frequency 12207 MHz V, symbolrate 27500000, coderate auto, 
rolloff 0.35
vpid 0x0202, apid 0x0285, sid 0x1263
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 1f | signal 0136 | snr 002d | ber 00000000 | unc fffffffe | 
FE_HAS_LOCK
status 1f | signal 0136 | snr 0031 | ber 00000000 | unc fffffffe | 
FE_HAS_LOCK

and view the channels with

mplayer - < /dev/dvb/adapter0/dvr0

For LNB1, it seems I can get signal via szap2:

pavel@htpc:~/project/satelit2/szap-s2$ ./szap-s2 -r Faith
reading channels from file '/home/pavel/.szap/channels.conf'
zapping to 6 'Faith':
delivery DVB-S, modulation QPSK
sat 1, frequency 11515 MHz H, symbolrate 27500000, coderate auto, 
rolloff 0.35
vpid 0x0947, apid 0x0948, sid 0xc517
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 1f | signal 0178 | snr 0051 | ber 00000000 | unc fffffffe | 
FE_HAS_LOCK
status 1f | signal 0178 | snr 0051 | ber 00000000 | unc fffffffe | 
FE_HAS_LOCK
status 1f | signal 0178 | snr 0050 | ber 00000000 | unc fffffffe | 
FE_HAS_LOCK

However, /dev/dvb/adapter0/dvr0 outputs no data for any of the stations 
on the second LNB1.

Perhaps it is correct and the channels I checked broadcast no stream at 
this time. Since scan2 keeps failing, please is there a place to 
download recent channels.conf for Astra 19.2E so that I can test on many 
more channels?

Thanks a lot,

Pavel.

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb