Pavel Hofman schreef: 
Alex Betis napsal(a):
  
On Wed, Dec 3, 2008 at 9:32 AM, Alex Betis <alex.betis@gmail.com 
<mailto:alex.betis@gmail.com>> wrote:


    On Wed, Dec 3, 2008 at 12:31 AM, Pavel Hofman
    <pavel.hofman@insite.cz <mailto:pavel.hofman@insite.cz>> wrote:

        pavel@htpc:~/project/satelit2/szap-s2$
        <mailto:pavel@htpc:~/project/satelit2/szap-s2$> ./szap-s2 -x
        EinsFestival
        reading channels from file '/home/pavel/.szap/channels.conf'
        zapping to 5 'EinsFestival':
        delivery DVB-S, modulation QPSK
        sat 0, frequency 12110 MHz H, symbolrate 27500000, coderate auto,

    I don't think there is 12110 channel on Astra 19.2, at least not
    accirding to lyngsat.

My bad, there is such channel... I somehow got to Astra 1G only page 
instead of all Atras in that position.
Try other frequencies anyway.
 
Maybe you have diseqc problems?

    

Alex,

Thanks a lot for your help. I tested the card on a different computer 
with Windows and I could scan and view both Astra 19.2E and Astra 23.5E 
free-to-air programs through A and B parts of the dual LNB. I have no 
decoding card yet, nor any adapter.

Since the computer was different, I will test my final computer/setup in 
windows (just have to install them first here :) ). Nevertheless I think 
it will work in windows.

I will get back with result.

Regards,

Pavel.

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Alex,

I have the following problem. I'm not able to rotate my rotor with my HD2 card and any of the drivers (liplianin, v4l-dvb, Manu). I tried GotoX diseqc commands as well as the goto position used by scan-s2.
As Pavel also has problems with diseqc (switch with A B input) I think it is not in the scan-s2 an szap-s2 utilities but in the driver.

I changed the subject because I do not know if Pavels problem is only due to diseqc problems.

I have another card (twinhan vp-1034 mantis) which should be able to rotate my rotor and I will try it next weekend to see if my rotor is not broken and I will also have a look into the driver but this will be not easy beacuse I do not have schematics or any documentation.

Regards,

Michel.