From: Yinghai Lu <yinghai@kernel.org>
To: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>,
linux-next@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>,
mingo@elte.hu, mel@csn.ul.ie
Subject: Re: [BUG] next-20081216 - WARNING: at kernel/smp.c:333 smp_call_function_mask
Date: Fri, 19 Dec 2008 13:02:40 -0800 [thread overview]
Message-ID: <494C0BF0.3080109@kernel.org> (raw)
In-Reply-To: <20081219134636.GA11772@linux.vnet.ibm.com>
Kamalesh Babulal wrote:
> * Yinghai Lu <yinghai@kernel.org> [2008-12-19 03:51:53]:
>
>> On Fri, Dec 19, 2008 at 2:54 AM, Kamalesh Babulal
>> <kamalesh@linux.vnet.ibm.com> wrote:
>>> Hi,
>>>
>>> next-200816 kernel panics, while boot up on x86_64 machine.
>>>
>>> Initializing CPU#0
>>> BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
>>> IP: [<ffffffff80700449>] init_ISA_irqs+0x18/0x53
>> .config and good boot log?
>>
>> YH
> Hi,
>
> I am able to reproduce with next-20081218 kernel also, attaching the
> bootlog and .config file of next-20081218 kernel
>
> root (hd0,0)
> Filesystem type is ext2fs, partition type 0x83
> kernel /vmlinuz-autotest root=/dev/mapper/VolGroup00-LogVol00 ro console=tty0 c
> onsole=ttyS1,19200 selinux=no debug nmi_watchdog=1 initcall_debug earlyprintk=s
> erial,ttyS1,19200 IDENT=1229689794
> [Linux-bzImage, setup=0x3000, size=0x274e50]
> initrd /initrd-autotest
> [Linux-initrd @ 0x37e5f000, 0x190980 bytes]
>
> Command line: root=/dev/mapper/VolGroup00-LogVol00 ro console=tty0 console=ttyS1,19200 selinux=no debug nmi_watchdog=1 initcall_debug earlyprintk=serial,ttyS1,19200 IDENT=1229689794
> KERNEL supported cpus:
> Intel GenuineIntel
> AMD AuthenticAMD
> Centaur CentaurHauls
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
> BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffcddc0 (usable)
> BIOS-e820: 000000003ffcddc0 - 000000003ffd0000 (ACPI data)
> BIOS-e820: 000000003ffd0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> DMI 2.3 present.
> last_pfn = 0x3ffcd max_arch_pfn = 0x3ffffffff
> init_memory_mapping: 0000000000000000-000000003ffcd000
> 0000000000 - 003fe00000 page 2M
> 003fe00000 - 003ffcd000 page 4k
> kernel direct mapping tables up to 3ffcd000 @ 8000-b000
> last_map_addr: 3ffcd000 end: 3ffcd000
> RAMDISK: 37e5f000 - 37fef980
> ACPI: RSDP 000FDFC0, 0014 (r0 IBM )
> ACPI: RSDT 3FFCFF80, 0034 (r1 IBM SERBLADE 1000 IBM 45444F43)
> ACPI: FACP 3FFCFEC0, 0084 (r2 IBM SERBLADE 1000 IBM 45444F43)
> ACPI: DSDT 3FFCDDC0, 1EA6 (r1 IBM SERBLADE 1000 INTL 2002025)
> ACPI: FACS 3FFCFCC0, 0040
> ACPI: APIC 3FFCFE00, 009C (r1 IBM SERBLADE 1000 IBM 45444F43)
> ACPI: SRAT 3FFCFD40, 0098 (r1 IBM SERBLADE 1000 IBM 45444F43)
> ACPI: HPET 3FFCFD00, 0038 (r1 IBM SERBLADE 1000 IBM 45444F43)
> ACPI: Local APIC address 0xfee00000
> SRAT: PXM 0 -> APIC 0 -> Node 0
> SRAT: PXM 0 -> APIC 1 -> Node 0
> SRAT: PXM 1 -> APIC 2 -> Node 1
> SRAT: PXM 1 -> APIC 3 -> Node 1
> SRAT: Node 0 PXM 0 0-40000000
> NUMA: Using 63 for the hash shift.
> Bootmem setup node 0 0000000000000000-000000003ffcd000
> NODE_DATA [0000000000009000 - 000000000000efff]
> bootmap [000000000000f000 - 0000000000016fff] pages 8
> (6 early reservations) ==> bootmem [0000000000 - 003ffcd000]
> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
> #2 [0000200000 - 00008198b0] TEXT DATA BSS ==> [0000200000 - 00008198b0]
> #3 [0037e5f000 - 0037fef980] RAMDISK ==> [0037e5f000 - 0037fef980]
> #4 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 - 0000100000]
> #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
> found SMP MP-table at [ffff88000009d540] 0009d540
> Zone PFN ranges:
> DMA 0x00000000 -> 0x00001000
> DMA32 0x00001000 -> 0x00100000
> Normal 0x00100000 -> 0x00100000
> Movable zone start PFN for each node
> early_node_map[2] active PFN ranges
> 0: 0x00000000 -> 0x0000009d
> 0: 0x00000100 -> 0x0003ffcd
> On node 0 totalpages: 261994
> DMA zone: 64 pages used for memmap
> DMA zone: 1665 pages reserved
> DMA zone: 2268 pages, LIFO batch:0
> DMA32 zone: 4032 pages used for memmap
> DMA32 zone: 253965 pages, LIFO batch:31
> Normal zone: 0 pages used for memmap
> Movable zone: 0 pages used for memmap
> Detected use of extended apic ids on hypertransport bus
> Detected use of extended apic ids on hypertransport bus
> ACPI: PM-Timer IO Port: 0x2208
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
> ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 14, version 0, address 0xfec00000, GSI 0-23
> ACPI: IOAPIC (id[0x0d] address[0xfec10000] gsi_base[24])
> IOAPIC[1]: apic_id 13, version 0, address 0xfec10000, GSI 24-27
> ACPI: IOAPIC (id[0x0c] address[0xfec20000] gsi_base[48])
> IOAPIC[2]: apic_id 12, version 0, address 0xfec20000, GSI 48-51
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ11 used by override.
> Using ACPI (MADT) for SMP configuration information
> ACPI: HPET id: 0x10228203 base: 0xfecff000
> SMP: Allowing 4 CPUs, 0 hotplug CPUs
> Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
> PERCPU: Allocating 49152 bytes of per cpu data
> per cpu data for cpu0 on node0 at 000000000100e000
> per cpu data for cpu1 on node0 at 000000000101a000
> per cpu data for cpu2 on node0 at 0000000001026000
> per cpu data for cpu3 on node0 at 0000000001032000
> NR_CPUS: 255, nr_cpu_ids: 4, nr_node_ids 1
> Built 1 zonelists in Node order, mobility grouping on. Total pages: 256233
> Policy zone: DMA32
> Kernel command line: root=/dev/mapper/VolGroup00-LogVol00 ro console=tty0 console=ttyS1,19200 selinux=no debug nmi_watchdog=1 initcall_debug earlyprintk=serial,ttyS1,19200 IDENT=1229689794
> Initializing CPU#0
> BUG: unable to handle kernel NULL pointer dereference at 0000000000000048
> IP: [<ffffffff80714479>] init_ISA_irqs+0x18/0x53
> PGD 0
> Thread overran stack, or stack corrupted
> Oops: 0002 [#1] SMP
> last sysfs file:
> CPU 0
> Modules linked in:
> Pid: 0, comm: swapper Not tainted 2.6.28-rc8-next-20081218-autotest #1
> RIP: 0010:[<ffffffff80714479>] [<ffffffff80714479>] init_ISA_irqs+0x18/0x53
> RSP: 0018:ffffffff80705f88 EFLAGS: 00010093
> RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff80778a80
> RDX: 0000000000000100 RSI: 0000000000000092 RDI: 0000000000000000
> RBP: 0000000000000000 R08: ffff88008089e000 R09: 0000000000000000
> R10: ffff880001012c60 R11: ffffffff803560a0 R12: ffff88000103e040
> R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
> FS: 0000000000000000(0000) GS:ffffffff806f73c0(0000) knlGS:0000000000000000
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000048 CR3: 0000000000201000 CR4: 00000000000006a0
> DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> Process swapper (pid: 0, threadinfo ffffffff80704000, task ffffffff806843a0)
> Stack:
> ffffffff8073b560 ffffffff807144bd ffffffff806e8f40 ffffffff8050e772
> ffffffff8073b560 ffffffff8070daf6 0000000000000000 0000000000093370
> 0000000000000000 ffffffff8070d394 80708e000010d136 00000000ffffffff
> Call Trace:
> [<ffffffff807144bd>] native_init_IRQ+0x9/0x931
> [<ffffffff8050e772>] register_cpu_notifier+0x1f/0x23
> [<ffffffff8070daf6>] start_kernel+0x1a8/0x319
> [<ffffffff8070d394>] x86_64_start_kernel+0xde/0xe2
> Code: 85 c0 75 0d 59 48 c7 c7 20 5f 68 80 e9 65 74 cb ff 5a c3 53 31 db e8 ba 85 00 00 31 ff e8 52 ad af ff 89 df e8 6a 12 b5 ff 89 df <c7> 40 48 00 02 00 00 48 c7 40 40 00 00 00 00 c7 40 4c 01 00 00
> RIP [<ffffffff80714479>] init_ISA_irqs+0x18/0x53
> RSP <ffffffff80705f88>
> CR2: 0000000000000048
can you check if tip works or not?
YH
next prev parent reply other threads:[~2008-12-19 21:03 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-16 11:37 linux-next: Tree for December 16 Stephen Rothwell
2008-12-16 23:26 ` Andrew Morton
2008-12-17 6:59 ` linux-next: mtd tree build failures (Was: Re: linux-next: Tree for December 16) Stephen Rothwell
2008-12-17 9:32 ` Artem Bityutskiy
2008-12-17 9:57 ` Stephen Rothwell
2008-12-17 7:07 ` linux-next: Tree for December 16 Artem Bityutskiy
2008-12-17 7:08 ` next-20081216 - powerpc link error 'dynreloc miscount' Kamalesh Babulal
2008-12-17 7:08 ` Kamalesh Babulal
2008-12-17 7:28 ` Sam Ravnborg
2008-12-17 7:28 ` Sam Ravnborg
2008-12-17 7:30 ` Stephen Rothwell
2008-12-19 10:54 ` [BUG] next-20081216 - WARNING: at kernel/smp.c:333 smp_call_function_mask Kamalesh Babulal
2008-12-19 11:51 ` Yinghai Lu
2008-12-19 13:46 ` Kamalesh Babulal
2008-12-19 21:02 ` Yinghai Lu [this message]
2008-12-23 13:21 ` Kamalesh Babulal
2008-12-23 21:09 ` Yinghai Lu
2008-12-24 16:34 ` Kamalesh Babulal
2008-12-24 20:34 ` Yinghai Lu
2008-12-26 9:12 ` Kamalesh Babulal
2008-12-26 10:05 ` Yinghai Lu
2008-12-26 10:27 ` Sam Ravnborg
2008-12-26 13:33 ` Ingo Molnar
2008-12-26 13:42 ` [PATCH] kbuild, sparseirq: work around GCC bug with __weak aliases Ingo Molnar
2008-12-27 4:09 ` Paul Mackerras
2008-12-27 10:59 ` Ingo Molnar
2008-12-28 23:27 ` Paul Mackerras
2008-12-26 15:28 ` [BUG] next-20081216 - WARNING: at kernel/smp.c:333 smp_call_function_mask Kamalesh Babulal
2008-12-26 15:33 ` Ingo Molnar
2008-12-26 17:04 ` Kamalesh Babulal
2008-12-26 18:17 ` Ingo Molnar
2008-12-27 7:11 ` Kamalesh Babulal
2008-12-27 7:14 ` Yinghai Lu
2008-12-27 7:39 ` Yinghai Lu
2008-12-27 8:37 ` Ingo Molnar
2008-12-27 8:39 ` Ingo Molnar
2008-12-27 11:21 ` Kamalesh Babulal
2008-12-27 11:24 ` Ingo Molnar
2008-12-27 11:57 ` Kamalesh Babulal
2008-12-27 12:26 ` Ingo Molnar
2008-12-27 15:29 ` Kamalesh Babulal
2008-12-27 21:10 ` Yinghai Lu
2008-12-27 21:10 ` Yinghai Lu
2008-12-28 12:55 ` Ingo Molnar
2008-12-28 16:11 ` Kamalesh Babulal
2008-12-28 23:09 ` Yinghai Lu
2008-12-27 5:05 ` [PATCH] perf_counter: more barrier in blank weak function Yinghai Lu
2008-12-27 5:06 ` [PATCH] kgdb: " Yinghai Lu
2008-12-27 8:17 ` Ingo Molnar
2008-12-27 8:34 ` Andrew Morton
2008-12-27 6:07 ` [PATCH] perf_counter: " KOSAKI Motohiro
2008-12-27 9:46 ` [BUG] next-20081216 - WARNING: at kernel/smp.c:333 smp_call_function_mask David Howells
2008-12-27 9:50 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=494C0BF0.3080109@kernel.org \
--to=yinghai@kernel.org \
--cc=kamalesh@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-next@vger.kernel.org \
--cc=mel@csn.ul.ie \
--cc=mingo@elte.hu \
--cc=sfr@canb.auug.org.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.