From mboxrd@z Thu Jan 1 00:00:00 1970 From: Anatolij Gustschin Date: Thu, 19 Mar 2009 14:17:36 +0100 Subject: [U-Boot] About PCI of U-BOOT of CANYONLANDS In-Reply-To: <49C2400D.1010703@fsi.co.jp> References: <49BFA0BE.7060103@fsi.co.jp> <200903171413.03396.sr@denx.de> <49C04E2C.5070507@fsi.co.jp> <200903181007.13324.sr@denx.de> <49C0E31C.9050200@denx.de> <49C0E3E7.9040503@fsi.co.jp> <49C0E913.2070609@fsi.co.jp> <49C0EFB2.9020800@fsi.co.jp> <49C109AD.70106@denx.de> <49C1CD60.6010103@fsi.co.jp> <49C20D75.6000406@denx.de> <49C22C74.2070809@fsi.co.jp> <49C2302B.6080207@denx.de> <49C235EE.8030104@fsi.co.jp> <49C23A4C.2010208@denx.de> <49C2400D.1010703@fsi.co.jp> Message-ID: <49C245F0.20606@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Kazuaki Ichinohe wrote: >> Try to set VIDEO_IO_OFFSET to 0xD8000000, it should work. The >> value of 0xD0800000 is wrong, now I see it after double-checking >> the PCI/IO map in the PPC460EX manual. Sorry, my fault. > > The PCI memory space is accessible. > However, the video output cannot be confirmed. > Why ? It is hard to guess. Does the driver recognize video RAM size correctly? Is the video RAM accessible? You can test it using 'md 0x80000000', 'mw 0x80000000 0xaa55aa55 1', 'md 0x80000000' commands. If the video RAM access doesn't work, than the VGA BIOS boot failed for some reason. Does your ATI card have two display output connectors? Are these DVI or VGA output connectors? Try to connect the display to another VGA connector if any. Best regards, Anatolij -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de