From mboxrd@z Thu Jan 1 00:00:00 1970 From: Anatolij Gustschin Date: Mon, 30 Mar 2009 18:13:03 +0200 Subject: [U-Boot] [PATCH v4] board support patch for phyCORE-MPC5200B-tiny In-Reply-To: <9e4733910903290729n7f10f704xbd191729a99457ad@mail.gmail.com> References: <20090324155637.12279.60059.stgit@localhost> <9e4733910903251214y1058215l6f4b78ab0b2870a7@mail.gmail.com> <20090327201217.58C92832E406@gemini.denx.de> <9e4733910903271348r19317a71m1a7cea7edbe8ac50@mail.gmail.com> <9e4733910903290729n7f10f704xbd191729a99457ad@mail.gmail.com> Message-ID: <49D0EF8F.7050002@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Jon Smirl wrote: > On Sun, Mar 29, 2009 at 10:08 AM, Markus Rathgeb > wrote: >> Hi! >> >> Have you read the BIOSEMU stuff in the mailing list? >> Can you adjust the PCI section and perhaps you can include the video >> example (set undef video). > > I have v1 of the pcm030 hardware and the baseboard doesn't have a PCI slot. > > I looked at some of your older emails. It looks like the framebuffer > is not accessible. You are hanging on a write to the PCI bus. > > Forget about running the video BIOS initially, just use the memory > commands from u-boot to make sure you can read and write the > framebuffer. No, memory access to frame buffer will only work after the SD-RAM controller of the GPU is properly initialized. Video BIOS is supposed to do this among other things. As the boot log showed, video memory size was not recognized by the radeon driver which indicates that the video BIOS run failed to initialize the graphic chip and memory controller. Fixing the XLB Initiator Window configuration for bus PCI IO space starting at 0x00000000 seemed to solve problems with video BIOS run. Best regards, Anatolij