All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dirk Behme <dirk.behme@googlemail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/4] ZOOM2 Add power reset button
Date: Wed, 10 Jun 2009 17:43:58 +0200	[thread overview]
Message-ID: <4A2FD4BE.8050405@googlemail.com> (raw)
In-Reply-To: <7A436F7769CA33409C6B44B358BFFF0C0115C32694@dlee02.ent.ti.com>

Menon, Nishanth wrote:
>> -----Original Message-----
>> From: Peter Tyser [mailto:ptyser at xes-inc.com]
>> Sent: Wednesday, June 10, 2009 9:27 AM
>>> diff --git a/drivers/i2c/twl4030_i2c.c b/drivers/i2c/twl4030_i2c.c
>>> index 774f813..549f974 100644
>>> --- a/drivers/i2c/twl4030_i2c.c
>>> +++ b/drivers/i2c/twl4030_i2c.c
>>> @@ -35,3 +35,25 @@ static inline int twl4030_i2c_read_u8(u8 chip_no, u8
>> *val, u8 reg)
>>>  	return i2c_read(chip_no, reg, 1, val, 1);
>>>  }
>>>
>>> +/*
>>> + * Power Reset
>>> + */
>>> +void twl4030_power_reset_init(void)
>>> +{
>>> +#ifdef CONFIG_OMAP3_ZOOM2
>>> +	u8 val = 0;
>>> +	if (twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, &val,
>>> +				TWL4030_PM_MASTER_P1_SW_EVENTS)) {
>>> +		printf("Error:TWL4030: failed to read the power register\n");
>>> +		printf("Could not initialize hardware reset\n");
>>> +	} else {
>>> +		val |= TWL4030_PM_MASTER_SW_EVENTS_STOPON_PWRON;
>>> +		if (twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, val,
>>> +					 TWL4030_PM_MASTER_P1_SW_EVENTS)) {
>>> +			printf("Error:TWL4030: failed to write the power
>> register\n");
>>> +			printf("Could not initialize hardware reset\n");
>>> +		}
>>> +	}
>>> +#endif
>>> +}
>>> +
>> All other drivers in drivers/i2c are host adapter drivers.  Ie they
>> implement i2c_read(), i2c_write(), i2c_probe(), and i2c_init().  The
>> twl4030_i2c.c driver doesn't seem to fit this mold.  Perhaps it would be
>> better placed in drivers/misc or a new drivers/power directory similar
>> to Linux?
> 
> This function probably belongs to board/omap3/common/power.c -> or even better to the board file itself?

I was about to mention the opposite ;)

Jean-Christophe asked to move the code from power.c to driver directory

http://lists.denx.de/pipermail/u-boot/2009-May/052400.html

If you follow above discussion, I was fine with power.c. If we get now 
a twl4030_i2c.c, we should merge the code from power.c into it, too 
(where ever it will be located and named, then).

Best regards

Dirk

  reply	other threads:[~2009-06-10 15:43 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-06-10 12:53 [U-Boot] Zoom hw reset Tom Rix
2009-06-10 12:53 ` [U-Boot] [PATCH 1/4] OMAP3 I2C Fix the sampling clock Tom Rix
2009-06-10 12:53   ` [U-Boot] [PATCH 2/4] I2C Add initial support for TWL4030 Tom Rix
2009-06-10 12:53     ` [U-Boot] [PATCH 3/4] ZOOM2 Add power reset button Tom Rix
2009-06-10 12:53       ` [U-Boot] [PATCH 4/4] ZOOM1 " Tom Rix
2009-06-12 21:46         ` Jean-Christophe PLAGNIOL-VILLARD
2009-06-12 21:57           ` Tom
2009-06-12 23:08             ` Menon, Nishanth
2009-06-13  2:28               ` Tom
2009-06-13 14:16                 ` Tom
2009-06-13 14:26                   ` Nishanth Menon
2009-06-10 14:27       ` [U-Boot] [PATCH 3/4] ZOOM2 " Peter Tyser
2009-06-10 14:43         ` Menon, Nishanth
2009-06-10 15:43           ` Dirk Behme [this message]
2009-06-10 16:16             ` Menon, Nishanth
2009-06-10 16:25               ` Peter Tyser
2009-06-10 18:08                 ` Heiko Schocher
2009-06-10 18:27                 ` Menon, Nishanth
2009-06-10 18:21                   ` Heiko Schocher
2009-06-10 18:50                     ` Menon, Nishanth
2009-06-10 20:27                   ` Jean-Christophe PLAGNIOL-VILLARD
2009-06-12 13:02                     ` Tom
2009-06-13 14:27                       ` Jean-Christophe PLAGNIOL-VILLARD
2009-06-10 18:06               ` Heiko Schocher
2009-06-10 18:04             ` Heiko Schocher
2009-06-10 17:56         ` Heiko Schocher
2009-06-10 17:48       ` Heiko Schocher
2009-06-10 14:46     ` [U-Boot] [PATCH 2/4] I2C Add initial support for TWL4030 Menon, Nishanth
2009-06-10 17:59       ` Heiko Schocher
2009-06-10 17:45     ` Heiko Schocher
2009-07-19  9:19     ` Wolfgang Denk
2009-07-19 15:23       ` Heiko Schocher
2009-07-19 17:06         ` Tom
2009-07-20  9:12           ` Heiko Schocher
2009-07-22 21:41             ` Jean-Christophe PLAGNIOL-VILLARD
2009-07-20 15:38           ` Dirk Behme
2009-06-10 14:52   ` [U-Boot] [PATCH 1/4] OMAP3 I2C Fix the sampling clock Menon, Nishanth
2009-06-11  2:43     ` Tom
2009-06-11  4:12       ` Menon, Nishanth
2009-06-11 14:02         ` Tom
2009-06-12 21:44           ` Jean-Christophe PLAGNIOL-VILLARD
2009-06-12 22:06             ` Tom
2009-06-17 22:31             ` [U-Boot] RFC " Tom
2009-06-12 21:41         ` [U-Boot] " Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4A2FD4BE.8050405@googlemail.com \
    --to=dirk.behme@googlemail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.