[U-Boot] Pull request - net

From: Ben Warren <biggerbadderben@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request - net
Date: Mon, 15 Jun 2009 00:17:52 -0700	[thread overview]
Message-ID: <4A35F5A0.4030501@gmail.com> (raw)

Wolfgang,

The following changes since commit 31f30c9eb60d9ab0bd702e31f66345f99b34bdc6:
  Mike Frysinger (1):
        add %.c->%.i and %.c->%.s rules

are available in the git repository at:

  git://git.denx.de/u-boot-net master

Ben Warren (4):
      Moved Davinci Ethernet driver to drivers/net
      Initial cleanup of Davinci Ethernet driver
      Switched davinci_emac Ethernet driver to use newer API
      Remove support for non-CONFIG_NET_MULTI on PPC4xx EMAC

Norbert van Bolhuis (1):
      A VLAN tagged DHCP request/discover is 4 bytes short

Prafulla Wadaskar (2):
      Marvell MV88E61XX Switch Driver support
      net: Add Marvell Kirkwood gigabit ethernet driver

Remy Bohmer (1):
      Convert DM9000 driver for CONFIG_NET_MULTI

Richard Retanubun (1):
      Subject: [PATCH] [repost] Standardize the use of MCFFEC_TOUT_LOOP as a udelay(1) loop counter.

Zach LeRoy (1):
      tsec: Add support for BCM5482S PHY

s-paulraj at ti.com (1):
      DaVinci Network Driver Updates

 board/atmel/at91sam9261ek/at91sam9261ek.c          |    7 +
 board/davinci/common/misc.h                        |    1 -
 board/davinci/dvevm/dvevm.c                        |    3 -
 board/davinci/schmoogie/schmoogie.c                |    3 -
 board/davinci/sffsdr/sffsdr.c                      |    3 -
 board/davinci/sonata/sonata.c                      |    3 -
 board/freescale/m5253demo/m5253demo.c              |    9 +
 board/scb9328/scb9328.c                            |    8 +
 board/trizepsiv/conxs.c                            |    8 +
 cpu/arm926ejs/davinci/Makefile                     |    2 +-
 cpu/arm926ejs/davinci/cpu.c                        |   12 +
 drivers/net/4xx_enet.c                             |   54 --
 drivers/net/Makefile                               |    2 +
 .../davinci/ether.c => drivers/net/davinci_emac.c  |  214 +++----
 drivers/net/dm9000x.c                              |   44 +-
 drivers/net/kirkwood_egiga.c                       |  664 ++++++++++++++++++++
 drivers/net/kirkwood_egiga.h                       |  503 +++++++++++++++
 drivers/net/mcfmii.c                               |    2 +-
 drivers/net/phy/Makefile                           |    1 +
 drivers/net/phy/mv88e61xx.c                        |  413 ++++++++++++
 drivers/net/phy/mv88e61xx.h                        |   62 ++
 drivers/net/tsec.c                                 |   41 ++
 include/asm-arm/arch-davinci/emac_defs.h           |   32 +-
 include/configs/M5253DEMO.h                        |    1 +
 include/configs/at91sam9261ek.h                    |    1 +
 include/configs/davinci_dvevm.h                    |    1 +
 include/configs/davinci_schmoogie.h                |    1 +
 include/configs/davinci_sffsdr.h                   |    1 +
 include/configs/davinci_sonata.h                   |    1 +
 include/configs/scb9328.h                          |    1 +
 include/configs/trizepsiv.h                        |    1 +
 include/netdev.h                                   |   50 ++
 include/tsec.h                                     |    2 +
 net/bootp.c                                        |    4 +-
 net/eth.c                                          |    8 -
 35 files changed, 1944 insertions(+), 219 deletions(-)
 rename cpu/arm926ejs/davinci/ether.c => drivers/net/davinci_emac.c (93%)
 create mode 100644 drivers/net/kirkwood_egiga.c
 create mode 100644 drivers/net/kirkwood_egiga.h
 create mode 100644 drivers/net/phy/mv88e61xx.c
 create mode 100644 drivers/net/phy/mv88e61xx.h