From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dirk Behme Date: Mon, 20 Jul 2009 17:38:42 +0200 Subject: [U-Boot] [PATCH 2/4] I2C Add initial support for TWL4030 In-Reply-To: <4A6352A7.7080307@windriver.com> References: <1244638432-30893-1-git-send-email-Tom.Rix@windriver.com> <1244638432-30893-2-git-send-email-Tom.Rix@windriver.com> <1244638432-30893-3-git-send-email-Tom.Rix@windriver.com> <20090719091944.4B70C832E416@gemini.denx.de> <4A633A57.9060002@denx.de> <4A6352A7.7080307@windriver.com> Message-ID: <4A648F82.6090905@googlemail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Tom wrote: > Omap2 is still pending. > I was hoping to help Richard out with this last week but he was on travel. > > There is not much more I think I can do wrt omap2. > All my targets are omap3. > The nearest I can find online is the nokia n8xx which uses a another > bootloader. > > The options as I see them are. > > 1. Get a pass on omap2 testing > 2. Rewrite i2c init to have a omap3 specific init > 3. Hack n8xx and try to convience you the results are reasonable > 4. Wait for omap2 testing. > > I vote for #1. Me too. Dirk > Heiko Schocher wrote: >> Hello Wolfgang, >> >> Wolfgang Denk wrote: >> >>> In message <1244638432-30893-3-git-send-email-Tom.Rix@windriver.com> Tom Rix wrote: >>> >>>> The TWL4030 supplies many peripheral for OMAP3 boards. These include >>>> power management, usb and, keyboard. >>>> >>>> The product description is found here: >>>> >>>> http://focus.ti.com/docs/prod/folders/print/tps65950.html >>>> >>>> Product reference document, tps65950.pdf, is found here: >>>> >>>> http://www.ti.com/lit/gpn/tps65950 >>>> >>>> Signed-off-by: Tom Rix >>>> --- >>>> drivers/i2c/Makefile | 1 + >>>> drivers/i2c/twl4030_i2c.c | 37 ++++++++ >>>> include/twl4030.h | 221 +++++++++++++++++++++++++++++++++++++++++++++ >>>> 3 files changed, 259 insertions(+), 0 deletions(-) >>>> create mode 100644 drivers/i2c/twl4030_i2c.c >>>> create mode 100644 include/twl4030.h >>>> >>> I think this is supposed to go through the i2c repo, but I haven't >>> seen any comments yet. >>> >> >> Hmm.. there are responses, see for example: >> >> http://lists.denx.de/pipermail/u-boot/2009-June/054086.html >> >> >>> Can you please check the state of this patch? Thanks in advance. >>> >> Hmm.. it is a little long to follow this ... it ended >> first here: >> >> http://lists.denx.de/pipermail/u-boot/2009-June/054654.html >> >> waiting for an Ack that it works on omap2 ... >> >> (I Acked the resulting 3 patches, see: >> http://lists.denx.de/pipermail/u-boot/2009-June/054585.html >> ) >> >> Ah, found one more answer from Tom: >> >> http://lists.denx.de/pipermail/u-boot/2009-June/054801.html >> >> ended in: >> >> http://lists.denx.de/pipermail/u-boot/2009-June/055071.html >> >> with a new patchset of 6 patches, starting with: >> http://lists.denx.de/pipermail/u-boot/2009-June/055072.html >> >> but state of omap2 is still pending ... see: >> >> http://lists.denx.de/pipermail/u-boot/2009-June/055087.html >> >> then Tom wrote, he has setup a git repo, see: >> http://lists.denx.de/pipermail/u-boot/2009-July/055328.html >> >> but I think, the state of the omap2 is pending ... so >> I (and I think Jean-Christophe also) wait for, that this >> pending state is going away ... >> >> Tom, do you have an update? >> >> (added Jean-Christophe to cc:) >> bye >> Heiko >> > > _______________________________________________ > U-Boot mailing list > U-Boot at lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot >