Anyone can help to check the traffic file?

Thanks
jon

> -----Original Message-----
> From: Jon Zhou [mailto:Jon.Zhou@jdsu.com]
> Sent: Wednesday, May 18, 2011 5:01 PM
> To: e1000-devel@lists.sourceforge.net; netdev@vger.kernel.org
> Subject: [E1000-devel] packet received in a wrong rx-queue?
> 
> There are 2 packets in the traffic
> 
> #1 create PDP context request, IPV4--UDP--GTP, src_ip=A and
> dst_ip=B,src_port=C,dst_port=D
> 
> #2 create PDP context response, IPV4--UDP--GTP,src_ip=B, dst_ip=A,
> src_port=D,dst_port=C
> 
> I suppose both of them will be received in same rx-queue but actually
> it doesn't
> Anything need to check?
> 
> ethtool -i eth5
> driver: ixgbe
> version: 3.3.9-NAPI
> firmware-version: 0.9-3
> bus-info: 0000:08:00.1
> 
> regards
> jon
> 
> 
> 
> 
> 
> -----------------------------------------------------------------------
> -------
> What Every C/C++ and Fortran developer Should Know!
> Read this article and learn how Intel has extended the reach of its
> next-generation tools to help Windows* and Linux* C/C++ and Fortran
> developers boost performance applications - including clusters.
> http://p.sf.net/sfu/intel-dev2devmay
> _______________________________________________
> E1000-devel mailing list
> E1000-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/e1000-devel
> To learn more about Intel® Ethernet, visit
> http://communities.intel.com/community/wired