From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dirk Behme Date: Thu, 08 Oct 2009 06:50:49 +0200 Subject: [U-Boot] [PATCH v3] TI: OMAP3: Overo Tobi ethernet support In-Reply-To: References: <20090911204750.GA22246@lixom.net> <20090923145556.GA28659@lixom.net> <20090926211434.GB21538@lixom.net> <5e088bd90910050656l265d6fav32fe3bd86fd06250@mail.gmail.com> Message-ID: <4ACD6FA9.3070905@googlemail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Olof Johansson wrote: > On Oct 5, 2009, at 8:56 AM, Steve Sakoman wrote: > >> On Sat, Sep 26, 2009 at 2:14 PM, Olof Johansson wrote: >>> Add setup for ethernet on Tobi, allowing kernel/ramdisk to be loaded >>> over tftp. >>> >>> This also refactors the smc911x driver to allow for detecting when the >>> chip is missing. I.e. the detect_chip() function is called earlier and >>> will abort gracefully when the Chip ID read returns all 1's. >>> >> >> Hmm . . . I just tried this on a board without smc911x chip and it >> seems to hang after printing "Net". >> >> Did it work for you in this case? Haven't had time to debug yet, but >> will try to look later today. > > The only hardware I have is tobi, which is why I thought I cc:d you as > well as asked others to test with other carriers if they had them. > > I guess first thing to find out is if it's the first read that hangs or > what. Any idea how to go on with this? I have no Tobi, so unfortunately I can't help here. Best regards Dirk