From: dz-tor <dz-tor@wp.pl>
To: hermann-pitton@arcor.de, terrywu2009@gmail.com, pavle.predic@yahoo.co.uk
Cc: video4linux-list@redhat.com
Subject: Re: Re: Leadtek Winfast TV2100
Date: Sun, 03 Jan 2010 16:37:48 +0100 [thread overview]
Message-ID: <4B40B9CC.1040108@wp.pl> (raw)
Hi,
I want to ask whether you are working on this 'issue'. I'm interested in
the subject, as I'm owner of this card and cannot get this stuff to work
- I've picture, no sound. Earlier you have written, that you can provide
patches for testing. If offer is still actual, I can test them.
Currently I'm using kernel 2.6.31, but if it's a problem I can switch to
2.6.32.
As I wrote earlier I have the same card - Winfast TV2100 with FM, tv
norm used in my country is PAL (I'm from Poland).
Regards,
Darek
>
>> Hey guys,
>>
>> Let me start by thanking you both for all your help. Unfortunately,
>> there isn't much I can do with the data you provided - it's way too
>> technical for me. I'd be happy to do any tests and apply any patches,
>> but I would need some instructions - but only if you have time; I
>> really don't want to burden you with this.
>>
>> Thanks again,
>>
>> Pavle.
>>
>>
>>
>> ________________________________
>> From: hermann pitton<hermann-pitton@arcor.de>
>> To: Terry Wu<terrywu2009@gmail.com>
>> Cc: pavle.predic@yahoo.co.uk; video4linux-list@redhat.com
>> Sent: Sat, 28 November, 2009 4:09:28
>> Subject: Re: Re: Leadtek Winfast TV2100
>>
>> Hi Terry Wu,
>>
>> Am Donnerstag, den 26.11.2009, 10:33 +0800 schrieb Terry Wu:
>> > Hi,
>> >
>> > Here are the subsystem IDs for different TV2100 models:
>> > Subsystem ID:0x6f30107d, TVF8533-BDF (PAL BG/DK)
>> > Subsystem ID:0x6f32107d, TVF5533-MF (NTSC)
>> > Subsystem ID:0x6f3a107d, TVF88T5-B/DFF (PAL BG/DK, FM)
>> >
>> > Terry
>>
>> better is to become active on it.
>>
>> we can most likely help about how to match such tuners fine,
>> if any doubts left, but the best is to send just patches with having
>> such hardware to test on.
>>
>> Compared to the early tda9887 stuff on LeadTek devices, LeadTek was
>> pioneering and we have that in mind, it should be fairly easy for those.
>>
>> Let's know the other way round too, where you have still concerns doing
>> so.
>>
>> Cheers,
>> Hermann
>>
>> > 2009/11/23 hermann pitton<hermann-pitton@arcor.de>:
>> > > Hi, thanks again!
>> > >
>> > > Am Montag, den 23.11.2009, 09:42 +0800 schrieb Terry Wu:
>> > >> Hi,
>> > >>
>> > >> Please refer to the attached JPEG file for the GPIO
>> settings of
>> > >> TV2100 with FM (PCB:B).
>> > >>
>> > >> Let me know if you need the information of TV2100 without FM
>> > >> (PCB:A, TVF8533-BDF).
>> > >>
>> > >> Terry Wu
>> > >
>> > > On a first look, if we start to count gpios from zero, we tell
>> the same.
>> > >
>> > > The TVF8533_BDF I would have to look up. It is four to five
>> years back.
>> > >
>> > > If it uses that minor number TI chip without radio support, we
>> treat it
>> > > as tuner=69 too currently.
>> > >
>> > > For all such older can tuners, widely different about the globe,
>> counts,
>> > > that we don't have any way to detect them. So first working,
>> either NTSC
>> > > or PAL, sits in the pool position and others have to think twice.
>> > >
>> > > OEMs do code tuners into eeprom content, some do not at all,
>> such doing
>> > > it are in competition and don't follow the rules of the main chip
>> > > manufacturer, Philips/NXP in that case, and go their own ways.
>> > >
>> > > So tuner tables are unstable across manufacturers.
>> > >
>> > > We often can't help that much in such cases, but implementing
>> their own
>> > > tuner eeprom detection into the linux drivers is of course still
>> > > welcome. Hauppauge does it very successfully since years.
>> > >
>> > > We can't do much about it, if OEMs don't follow Philips or whom
>> ever on
>> > > such.
>> > >
>> > > Thanks,
>> > > Hermann
>> > >
>> > >
>> > >>
>> > >> 2009/11/23 Terry Wu<terrywu2009@gmail.com>:
>> > >> > Hi,
>> > >> >
>> > >> > The TVF88T5-BDFF data sheet is attached.
>> > >> >
>> > >> > Terry Wu
>> > >> >
>> > >> > 11/17/2003 06:39 PM 72,010 TVF5531-MF.pdf
>> > >> > 03/12/2008 11:37 AM 555,285 TVF5533-MF-.pdf
>> > >> > 02/24/2004 02:19 PM 120,727 TVF5533-MF.pdf
>> > >> > 12/30/2003 06:59 PM 91,577 TVF5831-MFF.pdf
>> > >> > 09/26/2005 10:20 AM 156,853 TVF78P3-MFF.pdf
>> > >> > 11/17/2003 06:39 PM 67,947 TVF8531-BDF.pdf
>> > >> > 11/17/2003 06:39 PM 67,715 TVF8531-DIF.pdf
>> > >> > 03/12/2008 11:37 AM 509,340 TVF8533-BDF.pdf
>> > >> > 03/12/2008 11:37 AM 507,295 TVF8533-DIF.pdf
>> > >> > 12/30/2003 06:59 PM 87,921 TVF8831-BDFF.pdf
>> > >> > 12/30/2003 06:59 PM 87,624 TVF8831-DIFF.pdf
>> > >> > 09/26/2005 10:20 AM 176,525 TVF88P3-CFF.pdf
>> > >> > 03/24/2006 10:48 AM 460,941 TVF88T5-BDFF.pdf
>> > >> > 02/24/2004 02:19 PM 132,304 TVF9533-BDF.pdf
>> > >> > 02/24/2004 02:19 PM 120,940 TVF9533-DIF.pdf
>> > >> > 03/12/2008 11:37 AM 458,967 TVF99T5-BDFF.pdf
>> > >> >
>> > >
>> > >
>> > >
>>
>>
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
next reply other threads:[~2010-01-03 15:38 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-03 15:37 dz-tor [this message]
2010-01-08 19:34 ` Re: Leadtek Winfast TV2100 hermann pitton
2010-01-08 20:24 ` Blackmagic SDI card --> v4l2 ready ? Mars Forest
2010-01-08 20:32 ` Mars Forest
2010-01-11 13:57 ` Rafael Diniz
2010-01-08 22:56 ` Leadtek Winfast TV2100 dz-tor
2010-01-09 14:46 ` Pavle Predic
2010-01-09 16:23 ` dz-tor
2010-01-09 17:14 ` hermann pitton
2010-01-09 22:48 ` hermann pitton
2010-01-10 21:26 ` dz-tor
-- strict thread matches above, loose matches on Subject: below --
2009-11-21 22:33 Aw: " hermann-pitton
2009-11-22 12:51 ` Terry Wu
2009-11-22 22:30 ` hermann pitton
2009-11-23 1:23 ` Terry Wu
2009-11-23 1:42 ` Terry Wu
2009-11-23 2:30 ` hermann pitton
2009-11-26 2:33 ` Terry Wu
2009-11-28 3:09 ` hermann pitton
2009-11-28 18:04 ` Pavle Predic
2009-11-23 1:47 ` hermann pitton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B40B9CC.1040108@wp.pl \
--to=dz-tor@wp.pl \
--cc=hermann-pitton@arcor.de \
--cc=pavle.predic@yahoo.co.uk \
--cc=terrywu2009@gmail.com \
--cc=video4linux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.